}

Tender For Renovation Of Nilgiri Langur Enclosure In Aazp, Chengalpattu-Tamil Nadu

Tamil Nadu Forest Dept has published Tender For Renovation Of Nilgiri Langur Enclosure In Aazp. Submission Date for this Tender is 03-07-2025. Earth Work Tenders in Chengalpattu Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

49719877
Tender For Renovation Of Nilgiri Langur Enclosure In Aazp
Tender
Indian
Tamil Nadu
Chengalpattu
03-07-2025

Tender Documents

Tender Details

Tender For Renovation Of Nilgiri Langur Enclosure In Aazp; 1 Earth work excavating and depositing on bank with initial lead of 10mt. And initial lift of 2mts in hard stiff clay, stiff block cotton hard red earth and earth mixed with small size boulders and hard gravelly soil SS20B for foundation 2 Supply and filling M-sand in foundation 3 Providing Plain cement concrete 1:4 :8 using 40mm metal jelly for foundation 4 Random Rubble Masonry with cement mortafor 1:5 for foundation and basement 5 Rodent Proof on foundation up to Plinth + Half of the Above RR 6 Supply and erection of steel centering for plane surface of plinth Beams, column, roof beam, slab 7 Supplying, fabricating and placing in position of MS/RTS roads for RCC plinth beam 8 Supplying the MS/RTS roads for Grills 9 Suppling Mild Steel L Angle size50x50x6mm 10 Supplying Mild Steel Flat Bar size 50x6mm 11 Supplying and fixing SS Rods, Frames for Grills 12 labour Charge for Fixing Rods, L angel and Flat bars 13 Supply of Chain Link - 1” x 1” using 10 Gauge Galvanised Iron Wire (of all sizes) 14 Labour Charge for fixing of Chain Link 15 Reinforced cement concrete 1:2:4 using 20mm size hard broken stone excluding cost of reinforcement and centering charges asper standard specification for plinth beam 16 Refilling of Msand 17 Solid block masonry in cement mortar 1:5 using solid concrete block of 40x20x20cm size. (Solid Block 1:3:6), using 6mm granite chips. 18 PlasteringCM 1:420 mmthick for flooring surface 19 Colour washing two coats Shell lime using 20 Finishing the top of roof with on course of machine pressed tiles (23 cmx23cmx20mm) in cement mortar1:3 (onecementand three sand)12mm thick with crude oil 10 %by weight of cement used and pointed neatly with the same oiled mortar. 21 Stone pitching consisting of soil levelling stone laying and pointing 22 Painting two coats with ready mixed paint of approved brand and colour over one primer on new iron work 23 Supply and fixing 60x60x4mm SS Equal Angle 304 24 Supply and fixing 50 x 50 x 4mm SS Equal Angle 304 25 Supply and fixing of 20mm dia SS 304 26 Railing wheel 27 SS Shutter guide channel 75x40x4.8 28 Providing and Fixing of polyurethane foam for Sloped roof as thermal insulation panels 50mm thickness along with necessary flashings such as L flashing, C flashing etc& accessories such as screws, fastners, sealants etc for fixing the panel etc., complete. 29 Plain cement concrete 1:2:4 using 20mm size hard broken stone excluding cost of reinforcement and centering charges as per standard specification for Drain. 30 Painting one coat oil pain and two coat mural or colour painting of approved quality and over a white cement with bases priming coat for new wall. 31 Crystal glass LED Tube light 32 PVC pipe 33 Supplying and fixing in position best quality approved make of Jaquar or equivalent under counter oval type wash hand basin of size 560 x 450mm with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia B class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). 34 Supplying and fixing in position 15mm dia following taps made of Jaquar or equivalent (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.(Taps should be got approved by the Executive Engineer before use on the works)Swan neck tap 35 Swan neck tap 36 Rope ladder – 50m, wooden swings-2 Nos. tyre swings – 3 Nos. wood puzzle feeder, wooden pole / bamboo pieces, rubber tube for enrichment works.

Key Value

Document Fees
Refer document
EMD
INR 50000.0 /-
Tender Value
INR 49.90 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail