Tender For Construction Of Office Building In Marudur Town Panchayat, Karur District.; 1 Earth work Excavating and deposting on bank with initial lead of 10m& intial lift of 2m in hard stiff clay, stiffblack cotton, hard red earth shales ,murram, gravel, stoneyearth mixed with small size boulders etc completed as per std specification. 2 Plain Cement concrete of mix 1:4:8 (One part ofcement, four part of sandand eight part of aggregates) using 40mm guage hard broken including cost conveyance of all materials to site and labour charges, transporting and placing in position including shoring, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification 3 Steel centering for sides and soffitsincluding supports and struttingupto 1m height for plain surfacesuch as RCC slab with all cross bracings using mild steel sheet of size 90cmx60cmx10 gaugestiffened with welded miled steel angles of size 25x25x6mm for laid over silver oak for coundary wood joints of size 10x6.5 cm spaced at about 90cm centre to centre and supported by casurials props of 10cm to 13 cm diaspaced at about 75cm centre to centre and suppor etc completed as per std specification. 4 Ground Floor & First Floor 5 A) Column 6 B) Grade beam 7 C) Lintel. Beam &slab 8 Supplying fabricating and placing in position of steel rods using TMT SteelISIincluding cost of binding wire, cost of labour charges for fabrication and placing in positionetc. Complete. Complying with std. specifications. 9 Vibrated Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part of sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry for Reinforced Concrete Works including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc.Complete 10 Upto Basement 11 Ground floor 12 First Floor 13 Brick Work in Cement Mortor 1:5 Mix (one part of cement andfive part of sand) usingII Class Bricks of size 9X4 1/4X2 3/4from approved quarry including cost and conveyance of all materials to site loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. 14 a) Upto Basement 15 b) Ground Floor 16 c) First Floor 17 c) Second Floor 18 Collection Supply and Filling ofwell gravel from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and slacking the same to site to departmental gauge and filling to required depth, well rammed etc., Complete as per standard Specification 19 Special Ceiling Plastering in cement motor 1:3 mix (one part of cement and three part of sand) 10 mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per standard Specification 20 Plastering in Cement Mortor 1:5 Mix (one part of cement andfivepart of sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. 21 Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections.Profiles: The profiles should be three chamber system which provides high insulation properties with outerframe 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with allcorner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug. 22 Supply and Fixing of Teak wood scantling wrought and put up for frames of door and windows including fixing holdfast and all labour chargesand conveyance of all materials to siteetc., Complete as per standard specification. 23 Supply and fixing of Teak wood fully panelled and Double leaf (two Equal Panels) shutter for door including all labour charges cost and conveyance of all materials to site etc., Complete as per standard specification. 24 Supplying and fixing M.S.grill to doors, special windows and ventilators etc as directed by the departmental officers inclusive of cost of MS grill including one of cost red oxide and fixing in position etc., complete (as per the schedule of rate) SL.NO.182 Q3 25 Supply and fixing of U-PVC Two shuter openable Window using G.I steel Reinforcement, friction hinge, multipoint lock, and 5mm clear glass or foam sheet including cost and conveyance of all labour and all meterial charges etc Complete as per standard specification. 26 LOUVERED VENTILATOR Supplying fabricating and fixing in position of Alumi,Anodised natural colour matt finished LOUVERED VENTILATOR fixed window with three panels using 62*38*2mm@1.17kg/m and the louvers with moving arrangement will be made with Aluminium channel of size 60*30*4 mm @ 1.27kg/m with necessary glass panes for louvers 4mm thick Aluminium clips , including all materials,labour,power consumption charges required for fabrication if necessary chipping dismantling making necessary holes in RCC coloumns, Beams or masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing as drected by the departmental officers The Aluminium surfaces should be anodised with matt finish under electrically conditionin accordance withISspecification 1868/1962 of Anodic thickness of not less than 15 microns (fifteen) complete.All the materials should be got approved by the Engineer incharge before fixing as directed . 27 Supplying and fixing in Position of indian type water closet with all set in brick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. Complete as per standard specification. 28 Supplying and fixing in Position of Europeon type water closet with all set in brick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. complete. 29 Daddoing with glazed titles of size 305x200x6mm ofapproved make and quality and clourcement mortor 1:2, 10mm thick and pointing with white cement including finishing jointing and polishing with glossy finish etcComplete as per standard specification. 30 Paving the floor with Granite slabs (superfine polished with machine cut edges of 18-20 mm thick) of best quality and approved variety complying / confirming ISI specification land over cement mortar 1:3 (one cement and three sand) 20mm thick and pomted with same coloured cement neatly etc., complete. 31 Weathering course concrete with broken brick jelly of 20 mm gauge in pure slacked lime ( no sand to be added) over roof slab the proportion of brick jelly to lime being 32:12.5 by volume and laid over In a single layer and consolidated require designed and finished thickness by beating the concrete with wooden beaters of approved pattern , keeping the surface constantly with springing lime jiggery water asper standard specification and as directed by the departmental officers Complete as per standard specification. 32 Finishing with top of roof with one course of machine pressed tiles of size 20cmx20cmx2cm of approved quality laid in cement mortar 1:3 (One part ofcement and three part of sand) 12mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with same water proofing compound mixed with cement motar ,red oxide, etcComplete as per standard specification. 33 Paving the floor with Erocone designtiles for flooring of approved make and quality and clour ofin cement mortor 1:3 20mm thick and pointing with white cement including finishing jointing and polishing with glossy finish etc complete as per std specification 34 Painting the new walls two coats over one coat of priming with best weather proof Exterior Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by departmental officersComplete as per standard specification. 35 Painting the new wood work in all floor two coat of best synthetic enamel paintof approved colour and brand over one coat of primer including scrapping and preparation of surface, cost of breshes and neat finishing complying with stadard specifications 36 Painting the new iron work in all floor two coat of best synthetic enamel paintof approved colour and brand over one coat of primer including scrapping and preparation of surface, cost of breshes and neat finishing complying with stadard specifications 37 Wiring with 2X1.5 sqmm (22/0.3) PVC insulated sc unsheathed Cu.conductor cable of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with switch box with 5A F.T. switch(two way) in flush with wall and convered with 3mm thick hylem sheet for MS switch box with continous earth wire connection of 14 SWGTC wire and making good of the concealed portion with suitable colour for concealed stair case light point/Fan Point (SD.NO.24) Page No -13 38 Wiring with 2 x 1.5 sqm(22/0.3) insuheathedSc Cu Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and celing with PVC accessories with TW switch box and 5A F.T switch in flush with wall150 x 100 x 113 mm TW switch Box for 5A 3 pin non inter locking CS plug with continous earth wire connection of 14 SWG T.C wire and making good of the concealed portion with suitable colour for concealed PVC plug point (SD 36) Page No -20 39 Supply and fixing of TNEB meter board suitable for 32 A single phase service connection with 32A fues unit (500 V) 32A neutral link and earth link (1X18 copper flat) on TW plant of size 375mm X 300mm X19 with supporiting TW reepers of 1 thick an either side withpainting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wirefrom EB meter to fuse unit (SD No.125) Page No -51 40 Supply and run of 4 of 6 sqmm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 32mm G.I pipe (Class B bent at both ends with necessary angle iron up right and end supports for mains(SD No.73)Page No -33 41 Supply and run of 4 of 6 sqmm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on7/20 GI bearer wire for service connection mains(SD No.68) 42 Supply and fixing of Energy Efficient Ceiling Fan 1200 mm complete with stepped electronic 300 W regulator with 1 meter down rod on the existing clampetc complete as per std sepcification.connection mains (SD No.107) 43 Supply and fixingof 3 phase 4 wire 4way ICDB of 32 Amps per way with 100Amps TPNMC switch with suitable trunking box ms cable entry boxes and internal connection on suitable angle iron frame work with earth connection etc complete as per std sepcification.(SD177) 44 Supply and delivery of 2000 litre capacity H.D.P.E.Water tank approved ISI Quality including cost and convenance of all materils to the site etc complete As per standard specification 45 Wiring with 2x4sqmm (56/0.3mm) PVC insulated SC unsheathed Cu. Cable conductor cable of 1100V grade in suitable heavy gauge M.S.conduit pipe on wall and ceiling with M.S.accessories with 150mm x 100mm x 75mm MS switch box for 15A 3 pin non interlocking CS plug with painting of suitable colour,with continuous earthwire connection by 14 SWG TC wire for open power plug point. SD 13 46 Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL. SD 83 47 Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. Thesupports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete 48 Supply and fixing of single box type 440 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting. SD 88 49 Supply and delivery of following PVC Pipes 110mm PVC Pipe 6kg/cm2 including cost and conveyance of materials to site etc complete,.
