Tender For Addn/Altn To Trg Wg Building At Af Stn Chandinagar Under Ge (Af) Faridabad; 1 Taking down chowkats or frame with shutters (without taking off shuttters from frames) size exc 1.5 Sqm but not exc 4 sqm each each and removing from site and making good disturbed surfaces as per existing specifications complete all as specified and as directed. 2 Taking down chowkats or frame with shutters (without taking off shuttters from frames) size n .exc 1.5 Sqm and removing from site and making good disturbed surfaces as per existing specifications complete all as specified and as directed. 3 Demolition of brick work built in cement mortar in any position including all quoins, arches & pillars etc complete all as specified and directed. 4 M/L for old size Brickwork with subclass `B bricks straight or curved on plan exc 6 m mean radius in CM 1:6 complete all as specified and as directed. 5 Demolition of stone slab and tilesof any description or thickness in floors, approns etc laid, bedded and pointed in any mortar and removing rubbish off the premises complete all as specified and directed. 6 Material and labourfor pre polished granite tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting andpolishing types including 20 mm thick bedding layer in CM 1:6 complete all as specified and directed. 7 Material and labourfor pre-polished granite stone tiles dado 20mm thick machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of mirror finish type including 15 mm thick screed in CM 1 :4 on brick or concrete surface complete all as specified and directed. 8 M&L for grinding/rubbing/ mirror polishing to existing terrazo/mosaic/kota flooring by mechanical machine method complete all as specified and directed. 9 Taking down cement plaster including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and as directed. 10 Material and labour for rendering 15 mm thick in CM 1:6 on fair faces of brick or concrete surfaces of walls, facia etc to be finishedeven and smooth (w/o using extra cement) complete all as specified and directed. 11 Material and labour for preparing newly plastered surfaces and applying two coats of distemper oil emulsion including 3 mm thick putty and priming plastered and other surfaces with chalk whitening preparatory to distempering on surfaces of walls complete all as specified and as directed. 12 M&L for Complete removal of existing treatment from walls, fins, chajja etc shall include brooming down or steel wire brushing, scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots and removing debris/ malba to low lying area out side of MOD land and applying 3mm thick a layer of Birla white wall care water proof putty on scrapped/uneven surfaces to match with the existing surfaces before application of primer/distemper andapplying two coats of oil bound distemper over a coat of primercomplete all as specified and directed. 13 M&Lfor hollow core 8 mm thick wood grain shade or as approved first class heavy dutyprelaminatedPVC Wall panels lining/panelling and in ceilings inclusive of solvent cement and fixing at site on PVC frame or aluminium snap grid work as per specifications and drawing complete all as specified and directed. 14 M&L 5 mm thick plastering in CM 1:3 over ceiling and finished the surface even and smooth without using extra cement complete all as specified and as directed. 15 M&L forpreparation of newly plastered ceiling surfaces of any description and applying two coats ofoil bound distemper over a coat of primer complete all as specified and directed. 16 Preparing old treated plastered surfaces of ceiling and applyingone coats of oil bound distemper on ceiling complete all as specified and directed. 17 Supplying and fixing for 12 mm thick Toughened Glass frameless doors upto 2.10 M height includingall as per required arrangement & proper machine edge finish in angle & fixed in the flooring side with Aluminium U channel. Glass panels to be formed as per approved modules 12 mm thick clear toughened glass edge polished and accurate designed holes to be installed by means of steel fittings of an approved make including Floor spring , Lock approved make, Door Handle both side (SS make), all works including labour, wastages, cost of scaffolding, finishing with frosted design film etc. complete all as specified and directed. 18 S&F for 30 mm thick Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shuttercomprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws, complete all as specified and directed. Note: Stainless steel butt hinges and necessary Stainless steel screws shall be paid separately. 19 S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note : (i) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. (ii) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 20 Supply and fixing for 250mm long aluminium alloy, anodized, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed withscrews complete all as specified and as directed. 21 Supply and fixing mild steel butt hinges, 100 mm long, medium weight, cold rolledfixed with steel screws or welded to angle iron frame where required complete all as specified and as directed. 22 Supply and fixing 200mmlong aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed. 23 Supply and fixing for 125 mm aluminum handles cast type anodizedcomplete all as specified and directed. 24 Providing & fixing of Pre-painted Galvanized Steel Windows vajra series or equivalent windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for glass shutter should be of 52 x 25mm with concealed brackets. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy-duty stain less steel pivot hinges shall be provided per shutter. The windows should be panelled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter. Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self-expanding, screws. Including 12mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work including of all taxes. 25 Demolition of PCC cement concrete in ground floor and paving n.exc 15 cm thick(below or above ground level) un reinforced complete all as specified and as directed. 26 M&L PCC 1:4:8 type D-2 (40mm graded stone aggregate ) for sub base 75mm thick complete all as specified and directed. 27 M&L for vitrified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but n exc 0.72 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in cm 1:6 complete all as specified and directed. 28 Dismantling wall and ceiling boards (fibre, pulp, insulation etc) any thickness, including cover fillets and grid frame work complete all as specified and as directed. 29 Providing and fixing in true horizontal level 600 mm. X 600 mm. false ceiling system, using hot dipped galvanized steel section, exposed surface with pre-coated capping, main tee of size 24 x 32 mm., having 0.27 mm gauge at every 1200 mm. centre to centre maximum and rotary stitched cross tee of size 24 x 27 mm, having 0.27 mm gauge at every 600 mm. c/c. and sub cross tee of size 24 x 27 mm, having 0.25 mm gauge at 1200 mm c/c. and wall angle of size 19 x 19 mm., having 0.35 mm gauge fixed to the periphery of the wall. The above grid is suspended at every 1200mm c/c. in both directions using 2.0 mm. thick prestraightened GI wire laying FINE FISSURED TEGULAR Edge mineral fibreceiling tiles, of size 600mmx600mmx12 to 15 mm having NRC 0.55, Light reflectance of >84% (WT), thermal conductivity k = 0.052-0.057 W/m0K, Humidity Resistance of 99% , having Fire Performance CLASS O / CLASS 1 (BS 476) complete all as specified and directed. 30 Dismantling water tanks and removing to store of capacity n exc 500 ltrs complete all as specified and directed. 31 Supply and fixing 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.complete all as specified and as directed. 32 Dismantling water tanks of capacity exc500 and n exc 1000 ltrs and removal to contractors store yard, complete all as specified and directed. 33 Supply and fixing 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. complete all as specified and as directed. 34 Supply and fixing for 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring, joints,laid in trenches or in floors complete all as specified and as directed. 35 S&F in repair PVC (SWR) single socketed rain water pipe 150 mm bore in any length with rubber ring joints fixed towalls/roof incl brackets/clamps etc including taking down of embedded portion in wall including PVC bend and fixing/sealing the samewith suitable water proofing compound complete all as specified and directed. 36 Taking down of old existing roof treatment of any description incl scrube and remove loose concrete, brick tiles, mud fuska, plaster, bitumen, oil grases and any other materials that might effect adhesion by wire brushing the surface and cleaning of the surface up-to mother slab by demolition of existing old padding throughly with water and disposed off old materials from site complete all as specified and directed. 37 M&L forcement concrete 1:2:4 type B-0 ( using 12.5 mm graded stone aggregate) as inroof padding, roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. 38 M&L for 20 mm thick screed bed or bedding layer of mortar in CM 1:4for laying floor finishes as on roof mixed with WPC as per manual at any height complete all as specified and directed.Note : WPC will be measured and paid separately. 39 M&L for 15 mm thick plastering in CM 1:4 on the surfaces other than roof including taking down old cement plaster/grit plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls/grit wash surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.Note : WPC will be measured and paid separately. 40 Supply only liquid WPC complete all as specified and directed by Engineer-in-Charge. 41 Preparing and cleaningthe internal surface areas throughly so that they are free from all contaminants like dirt and laitance & to remove all the loose materials by various mechanical means complete all as specified and directed by Engineer-in-Charge. (a)Removal of all surface Imperfections, protrusions, loose concrete & fittings of cracks using BOSTIK-Boscocem SBR later Polymer Modified Mortar in the ration Cement : Sand (1:4) and 5% by weight of cement. (approx 240SQM which is 30% of the total 800 Sqm Roof surface Area).(b)Supplying and applying, Bostik Elastocoat (Acryllic Based High Performance Elastomeric Waterproof Coating) single component Liquid Applied water proofing members after applying One primer coat of Bostik Sealer coat Acrylic Primer @ 100ml/Sqm. And allow the sealer coat to dry for two hrs, Apply first coat of Bostik ELASTOCOAT @ 1.5 Sqm/Lt by roller or brush on the primed surface & allow drying for 4-5 hrs before application of second coat of Bostik Elastocoat @ 1.5 Sqm /Lt. The laying of Liquid applied membrane shall be laid by the authorized & certified applicator of the manufacturer of Membrane. 42 S&Fpowder coated aluminium frame of standard section for doors, windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge. 43 M&L 4.8mm thick frosted sheet glass ordinary quality and glazing area exc 0.50 sq each pane,with oil putty/rubber/aluminium beading in square pane complete all as specified and directed. 44 Material and labourfor 12mm thick Prelaminated particle board,prelaminated both side with decorative choice laminations, fixed with screws to timber frame workcomplete all as specified and directed. 45 Supply and fixing anodised aluminium door shutters, aluminium section weighting 0.55 Kg/ RM including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and as directed. 46 M&L for ATT and providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wallusing chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed. 47 M&L for ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron 48 M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed. 49 M&L for ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6-8mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same with chalk and white cement complete all as specified and directed. 50 S&F 75mm size brass handles, cast type polished bright complete all as specified and as directed. 51 S&F magnatic catch for wooden cabinate shutters complete all as specified and as directed. 52 Material and labourfor 12mm thickPrelaminated board,prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work and fixed in repairs complete all as specified and directed. 53 Material and labourfor 18mm thick Prelaminated , board,prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work and fixed in repairs complete all as specified and directed. 54 Supply and fixing in repairs continuous (piano) hinges mild steel bright finish or electrogalvanised 30mm flaps complete all as specified and directed. 55 Excavation in trenches not exc. 1.5m wide and not exc. 1.5m deep for foundation etc. not exc 10 Sqm on plan getting out as in hard / dense soil complete all as specified and as directed. 56 Excavation in trenches in soft/loose soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr depth for laying of cables/poles or foundation etc and getting out all as specified and directed by Engineer-In-Charge. 57 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed. 58 Removing excavated material n exc. 50 m from starting point and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed. 59 M&L PCC 1:4:8 type D-2 (using 40mm graded aggregate ) as in foundation, filling & mass concrete complete all as specified and as directed. 60 M&L for RCC M25 design mix using (20mm graded stone agg) for fdn, bases of col, plinth beam etc complete all as specified and as directed. 61 M&L for RCC M-25 design Mix using 20mm gradded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and as directed. 62 M&L for RCC M-25 design mix using 20 mm graded stone agg. as in roof slab supported on wall / beams complete all as specified and as directed. 63 M&L for RCC M-25 design mix using 20 mm graded stone agg. as in beams ,cantilevers ,lintels over 1.50 mtr span complete all as specified and as directed. 64 M&L for formwork to sofits or suspendedb slabs such as roof slabs, floor slab, landing and similar work not exc 200mm thick complete all as specified and directed complete all as specified and as directed. 65 M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough surface of concrete complete all as specified and as directed. 66 M&L for Formwork to sides of pillars, posts, struts, piers, columns, and stanchions square/recatangular/polygun on plan for rough finished surfaces complete all as specified and as directed. 67 M&L for TMT Bars 10 mm dia & over, cut to length bent to shape, reuired, including cranking bending and fixing to beam slab, chajja for faciliating guniting complete all as specified and as directed. 68 M&L for TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 69 Complete all as item No 68 here-in-above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed. 70 M&L for glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed. 71 Material and labour for non skid coloured ceramic dark tiles of size 7-8 mm thick area of each tiles exceeding 0.11 Sqm bur not exc 0.18 Sqm (400x400mm) as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tiles over andincluding 20 mm thick screed bed in CM 1:6 complete all as specified and as directed. 72 Supply and fixing15 mm Brass CP central hole basin mixer for mixing hot & cold water screwed down for iron pipe and fixed including connections complete all as specified and directed. 73 S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. 74 Supply and fixingfor 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring, joints,laid in trenches or in floors complete all as specified and as directed. 75 Supply and fixing 15 mm bore chromium plated fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed. 76 Supply and fixing15 mm bore chromium plated Stop angle valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed. 77 Supply and fixing in polythene connection of low density polyethylene (LDPE) pipes of pressure rating 2.5 Kgf/Sqcm, 45cm long with and including two brass union couplings, heavy duty, suitable for 15mm bore pipe, one on each end for connecting polyethylene pipe to GI pipe and fixed complete all as specified and directed. 78 Supply and fixing brass chromium plated tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specified and directed. 79 Supply and fixingsheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. 80 S&F coloured composite pattern vitreous china wash down water closet pan (pedestal pattern, model Corium-220 of any colour, twin flush systemincluding soft close seat cover all as specified and directed by Engr In Charge. Make Cera Cat Part No S1013216 or equivalent model & make as per approved list and approved by GE. 81 S&Ffancy coloured wash hand pedestal basin size 630x510x180mmcomplete all as erectedby manufacturers instruction shade as approved by GE. Make Cera cat part No. S2040111 or equivalent as approved by GEincluding 32 mm dia CP waste fitting and PVC pipe of required length complete all as specified and directed. 82 Supply and fixing600 mm x 450 mm polished sheet glass mirror of thickness 5 mm of selected quality glass with PVC moulding all around, mounted on 6 mm thick CWR plywood backing and fixed to wooden/rubber plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engr-in-Charge. 83 Supply and laying GI pipe line medium grade size 25 mm dia with allfittings like socket of any type, elbow, bend, union, short piece, long screw, flange, cutting & welding as reqd site complete all as specified and as directed. 84 Supplyand fixed Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixedsize 25 mm (1”)dia complete all as specified and directed 85 Material and labour for Cutting GI Pipe line of size 50 mm to provide new connection by inserting GI TEE of 50/25 mm including necessary lead joints ,Excavation, returning, filling in of excavated material and inclGI fittingss complete all as specified and directed. 86 Taking down carefullyaluminium point wiring (light, Socket or power) completeincluding fittings and fixturessuch as switches, ceiling roses pendents, regulators, sockets etc for taking credit to be measured separetly including making good the disturbed portion/surface complete all as specified and directed 87 M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated and (FRLS grade), unsheathed size 1.5 sqmm with PVC concealedConduit( dia not les than 25 mm), ISI marked, heavy grade, with fixing accessories for one light /fan/bell point controlled by one switch , pressed steel concealed modular flush boxes coveredwith modular plate, contineous earth wire of PVC insulated unsheathed multi stranded copper conductor cable of size 1.5 Sqmm for earth wire connected to common earth dollycomplete all as specified and directed. Note : Cost of modular flush boxes and PVC modular plates shall be measured and paid seperately accordingly as per type and size. 88 All as per item No 87 above but for one3/5 pin socket 5 Amp on same board, with 1.5sqmm copper conductor wire with 1.5sqmm earth wire. 89 All as per item No 87 above but for one3/5 pin socket 5 Amp on independent board with 2.5 sqmm copper conductor wire with 2.5 sqmm earth wire . 90 All as per item No 87 above but for 3 pins socket outlet 15 Amps independent with 4.0 sq mm incl contineous earthing with multistandred copper conductor PVC insulated unsheathed size 4.0 Sq mm complete all as specified and directed. 91 S&F Modular switchflush type, 5/6 Amps, single pole one modulewhite colour 230 Volts , AC complete all as specified and directed by Engr-in-Charge. 92 S&F Modular switch flush type, 15/16 Amps, single pole one module white colour 230 Volts , AC complete all as specified and directed by Engr-in-Charge. 93 S&F Modular socket3 pins combined, 5/6 Amp, flush type(multi purpose)two module ,230 Volts , AC complete all as specified and directed by Engr-in-Charge. 94 S&F Modular socket5 /6 pins combined, 15A/16 Amp, flush type(multi purpose)two module 230 Volts , AC complete all as specified and directed by Engr-in-Charge. 95 S&F Modular white cover plate with frame suitable for three module way 230 Volts , AC complete all as specified and directed by Engr-in-Charge. 96 S&F Modular white cover plate with frame suitable for four module way 230 Volts , AC complete all as specified and directed by Engr-in-Charge. 97 S&F Modular white cover plate with frame suitable for six module way 230 Volts , AC complete all as specified and directed by Engr-in-Charge. 98 S&F Modular white cover plate with frame suitable for 08 module way 230 Volts , AC complete all as specified and directed by Engr-in-Charge. 99 S&F Modular white cover plate with frame suitable for 16 module way 230 Volts , AC complete all as specified and directed by Engr-in-Charge. 100 S&F Modular metal flush box suitable for three module way 230 Volts , AC complete all as specified and directed by Engr-in-Charge. 101 S&F Modular metal flush box suitable for four module way230 Volts , AC complete all as specified and directed by Engr-in-Charge. 102 S&F Modular metal flush box suitable for six module way230 Volts , AC complete all as specified and directed by Engr-in-Charge. 103 S&F Modular metal flush box suitable for 08 module way230 Volts , AC complete all as specified and directed by Engr-in-Charge. 104 S&F Modular metal flush box suitable for 16 module way230 Volts , AC complete all as specified and directed by Engr-in-Charge. 105 S&F modular stepped type electronic fan regulator flush type,2-way 230 Volts , AC complete all as specified and directed by Engineer-in-Charge. 106 S&F Ding Dong door bell230 Volts , AC complete all as specified and directed by Engr-in-Charge. 107 S&F Modular Bell push flush type 5 Amps, single pole one way 230 Volts , AC complete all as specified and directed by Engr-in-Charge. 108 S&F ceiling rose, PVC / Polycarbonate isolated body ,surface backlite, 65x50mm,three terminals, 230 Volts , AC complete all as specified and directed by Engr-in-Charge 109 S&FBatten holder PVC/Polycarbonate base / backsuitable for LED lamp. 230 Volts , AC complete all as specified and directed by Engr-in-Charge 110 S&F LED Bulbs 9/10W B-22 Pin type 230 Volts , AC complete all as specified and directed by Engr-in-Charge 111 S&F in replacement single pole and neutralsheet metal enclosure with a two pin and earth plug and socket complete with one single pole 20 ampsMCB complete all as specified and directed by Engr-in-Charge 112 S&F in replacement LED tube light fittings 20W (4 feet) wall mounted LED batten extruded PVC heat sink provided for efficient heat dissipation & integrated electronic driver optics diffused complete including electrical connection with copper cable from ceiling rose to fittings complete all as specified and directed by Engr-in-Charge 113 S&FLED 6000K (2’ feet), 10WDecorativeLED lighting fixture with extruded PVC . heat sink, environmental friendly, energy efficient ready to use pack, complete and including taking down existing fittings all as directed by Engineer-in-Charge. 114 S&F in replacement Skylite recess mounting,36W, LED 2x2 luminaire integrated electronic driver, optics diffused, completeincluding electrical connection with copper cable from ceiling rose to fittingsall as specified & directed by Engineer in charge . 115 S&F in replacement Skylite recess mounting,15/20 W, LED Round type luminaire integrated electronic driver, optics diffused, completeincluding electrical connection with copper cable from ceiling rose to fittingsall as specified & directed by Engineer in charge . 116 S&F in replacement LED building secuity light 35 watt made up of pressure die cast aluminium housing with mid power LED as lightening source and PC cover having top opening inbuilt LED driver with IP66 protection and impact resistance of IK-07 complete including GI bracket with nut bolts, washers etc includingelectrical connection with copper cable from ceiling rose to fittings complete all as specified and directed by Engr-in-Charge 117 S & F Wall Mounted Fan Heavy Dutyof size 400 mm sweep, 1300 RPM, 3 blade Complete all as Specified and directed by Engr-in-charge. 118 Supply and fixing ceiling fans complete with blades, down rods with accessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed 119 S & F exhaust fans made of PVC plastic body complete with louver shutter of size 300 mm sweep, 1200 RPM, 230 Volt , AC,50 Hzcomplete all as specified and directed by Engrr-in-charge. 120 M&L for submain wiring with 2X4.0 Sqmm + 1X4.0 Sqmm Earth Wire single core PVC insulated FRLSHsheathed copper cableconnecting to common earth dolly in and including heavy duty PVC concealedConduitand dismantling and taking down existing unserviceable wiring, all accessories complete all as specified and directed. 121 M&L for submain wiring with 2X10.0 Sqmm + 1X10.0 Sqmm Earth Wire single core PVC insulated FRLSHsheathed copper cableconnecting to common earth dolly in and including heavy duty PVC concealedConduitand dismantling and taking down existing unserviceable wiring, all accessories complete all as specified and directed. 122 Sub main wiring alongwith earth wire, single core cable, 4x25 Sqmm + 2x16 Sqmm, PVC insulated PVC unsheathed stranded FRLSH copper conductor cablein and including PVC concealed/ surfaceconduit of earth wire with 1x16 Sq mmcopper cable fixed along with the sub main in PVC conduit and connecting to earth dollyand including taking down complete all as Specified and directed by Engr-in-charge.Note : Four runs copper wire for phase & neutral and Two run for earth wire with PVC Conduit shall be measured one unit length. 123 Supply and fix water heater storage type ( geyser) electric , capacity 25 Ltrs BEE 5 Star rated complete all as specified and directed by Enger-in-Charge. 124 S&F in replacement VTPN 4 way double door prewired distribution board TPN-DPX 125 MCCB including one No MCCB 100 Amps, 25 kA, 4 pole as incomer and suitable SPN/TP MCBs as outgoing double door type sheet metal enclosure 415V with 200 Amps rated standard busbar of suitable size plate and common neutral link without MCBs with blank plate suitable for 4 way complete and including taking down VTPN DBs all as specified and all as directed by Engineer-in-Charge.Note : Rates of MCCB and MCB SPN/SP/TP shall deemed to be included in the quoted rates. 125 S & F in replacement ofsingle pole and neutral sheet metal enclosures for Distribution board (DBs)suitable for MCBs fitted with busbar , Neutral link ,Earth Bar and Din rail 240 V, 50 Hz supply double door SP&N DB system 12 ways complete all as specified and directed by Engrr-in-charge. 126 S&F MCB SPN 40-63 Amps 240Vincl all termnials, fitting etccomplete all as specified and directed by Engrr-in-charge. 127 S&F MCB SP 06 to 40 Amps 240Vincl all termnials, fitting etc complete all as specified and directed by Engrr-in-charge. 128 M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanisedmeans of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 15 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion and taking out old u/s existing earthing . 129 Supply and install Hi Wall split units (2.0 ton) complete with indoor and outdoor unit (inverter type) complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 2.0 ton complete all as specified and directed by Engineer-In-Charge. 130 Supply & fix Voltage stabilizer for automatic operation single phasenaturally air colled indoor type &designed for input variation between 170 volts to 250 volts with output voltage stabilized at 230 with accuracy of +/- 2.5% and capacity 5 KVA complete all as specified and directed by Engineer-In-Charge 131 S&F single pole and neutralsheet metal enclosure with a two pin and earth plug and socket complete with one single pole 20 ampsMCB complete all as specified and directed by Engineer-In-Charge. 132 S&F of copper tubing outer dia ( 1/2 and 1/4) suitable for 1.5 TR AC including nitril rubberthermalinsulation capacity complete all as specified and directed by Engineer-in-Charge. 133 M&L for stand ( wall mounted type & Floor mounted type ) of suitable for split type ACcomplete all as specified and directed byEngineer-in-Charge. 134 M& L forPVC drain pipecomplete all as specified and directed byEngineer-in-Charge. 135 M&L for sand cushoning with a layer of sand 80mm thick before laying of cable and 150mm thick after laying of cable to trenches complete all as specified and directed by Engineer-In-Charge. 136 M&L for sub class `B` bricks for cable protection all as specified and directed by Engineer-In-Charge. 137 Supply and laying, connecting and testing XLPE underground cableinsulated, and overall sheathed with aluminium conductor heavy duty 1100 volts grade 120 sqmm 3.5 core laid in trenches/ on poles/ road crossing or passing through existing/new pipe under road crossing, clamping on walletc. Note:(i) Cost of laying electrical cable through new/existing pipe under road, buildings, railway tracks, highwaysand Aluminium thimbles/lugs are incl in the quoted rates. (ii) All equipments , machinery or toolsif required for laying electrical cable through new/existing pipes are provided by the contractor without any extra cost. 138 Supply and laying, connecting and testing XLPE underground cableinsulated, and overall sheathed with aluminium conductor heavy duty 1100 volts grade 25 sqmm 4 core laid in trenches/ on poles/ road crossing or passing through existing/new pipe under road crossing, clamping on walletc. Note:(i) Cost of laying electrical cable through new/existing pipe under road, buildings, railway tracks, highwaysand Aluminium thimbles/lugs are incl in the quoted rates. (ii) All equipments , machinery or toolsif required for laying electrical cable through new/existing pipes are provided by the contractor without any extra cost. 139 Supply, installation, testing and commissioning of LT panel, out door type made out of 3.15 mm thick CRCA sheet, suitable angle iron frame for structure and base, copper busbar 600 amps rated with SMC busbar supports - 04 Nos, dust/vermin proof, epoxy powder coated siemens grey painting over a coat of red oxide primer inside/outside of the panel, double shuttered with locking arrangements, cable alley, anodized aluminium with black background with white engraved letter of name plates, schematic diagram for distribution, rubber gaskets, cable glands and internal copper wirings with appropriate lugs complete including necessary civil works and making good disturbed surfaces with following accessoriescomplete all as specified and directed by Engineer-in-Charge. (CPRI Approved) Incoming:-MCCB four pole, 35 KA,250 Amps (adjustable type) - 01NoOnload change over switch 250 Amps, four pole - 01 NoOutgoing:-MCCB four pole, 25 KA, 63 Amps (adjustable type) - 06 No MeterDigital Ammeter with LED indication lamp with selector switch-1 Nos Digital voltmeterwith LED indication lamp with selector switch -1 Nos 140 Net Contract Sum will be after deducting Sch of Credit of Rs 92,775.00
