|
| 1 | Earth work excavation and deposting on bank with an intial lead of 10m& initialliftm of2m in hard siff clay , stiff black cotton , hard red earth shales , murram , gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil asper standard specification 20.B including refilling charges |
| 2 | Plain cement concrete 1:4:8 mix using 40mm metal ISS HBG metal including and const and conveyance of all materials and all labour charges etc completeas per std specification |
| 3 | Providing steel centeringfor sides and soffits of cement concrete works including necessary arrangements with strutting for plain surfaces with out props, With all cost and conveyance of materials and lab our at site ect ., Coplete as per standard specfication. |
| 4 | Without Props |
| 5 | For Column |
| 6 | For Slab & beam |
| 7 | Supplying , fabricating and placing in it position of MS or RTS rod including the cost of steel & Binding wire, labour charges for cutting, bending, placing & tying with grills and conveyance etc., complete.asper standard specification. |
| 8 | Reinforced cement concrete 1:11/2:3 mix using 20mm ISS size HBG metal from approved quarry including all cost and conveyance of all materials to site and all labour charges etc., complete.asper standard specification. |
| 9 | For Foundation / Basement |
| 10 | For Ground Floor |
| 11 | Supplying and filling in foundation andbasement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. |
| 12 | Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9\" X 43/8\"X 2 3/4\" including finishing, curing, etc., complete complying with standard specification - 100CFT |
| 13 | For Basement |
| 14 | For Super Structure |
| 15 | Special ceiling Plastering cement mortar 1: 3 mix10mm thick including cost and conveyance all materials etc. complete as per std specification |
| 16 | Plastering with cement mortar 1: 5 mix12mm thick including cost and conveyance all materials etc. complete asper standard specification. |
| 17 | Weathering course of concrete borken brick jelly 20mm size in pure slacked lime over RCC roof slab the proportion 32:12.5 (Thirty two Broken Jelly and Twelve and Half Slacked lime) Mix for required depthof 80mm for giving required slope and thickness to roof as required well beaten with wooden beaters etc., complete complying with standard specifications. |
| 18 | Terrace flooring with one course or pressed tiles of size 20cm x 20cm x 20mm laid in CM 1:3 (One cement and three sand) mixed with crude oil 10% by weight of painted with same oiled mortar in all cost of materials and lab our charges etc., complete. as per standard specification. |
| 19 | Providing granolithic floor finish of 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two crushed sand (M-Sand) and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panellingwherever necessary and as directed by the departmental officers) |
| 20 | Supplying fixing of M.S sheet doors and widows and Grills including all cost and conveyance of materials to site and all labours charges for etc. complete asper standard specification. |
| 21 | Supplying and fixing of rolling shutters shall be pull and push type (Gear operated) made of 18G/3\" lathe sections which consist of five main parts such as curtain, lock plate, guide channels rollers and hood cover. These five main parts are made out of special components detailed below: curtain shall be of 18G/3\" lath sections cut to required size and filled with heavy cast iron / MS clips. For 8\"0\"(2.45m) high rolling shutter lath sections provided shall be not less than 37 numbers. Lock plate shall be 10GMS sheet and attached to the side brackets with 20mm square bar.Side brackets shall be of 10G MS plate and cast iron \"U\" clamps shall be rivetted to the side brackets. Roller shall be of heavy cast iron pullies fitted with heavy duty \"C\" class 40mm steel pipe and high tensile high carbon coil springs. 2 springs shall be supplied. Side brackets shall be of 10G MS plate and cast iron \"U\" clamps shall be rivetted to the side brackets. Roller shall be of heavy cast iron pullies fitted with heavy duty \"C\" class 40mm steel pipe and high tensile high arbon coil springs - 2 springs shall be supplied. Hood cover shall be of 0.8mm CRCA sheet reinforced with 25mmx25mmx3mm MS angle or gate channel. The rolling shutter in addition to the above should have pulling hook and shall be coated on exposed area with heavy coat of red oxide primer etc., complete. as per standard specifications |
| 22 | Painting two coats with approved Interior and Exterior Emulsion paint over cement plastered wall surfaces including cleaning preparing the surface and quring etc complete asper standard specification. |
| 23 | Painting two coats with ready mixed approved paint over newsteel surfaceincluding cost and conveyance all materials etc. complete asper standard specification. |
| 24 | Supply and runof 2 of 4 sq.mm(56/0.3) PVC insulated SC unsheathed Cu.conduction of 1100V on 7/20 GI bearer wire for service connection mains. (SD 65) |
| 25 | Supply and run of 2 of 4 sq.mm.(56/0.3)PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (class \"B\" ) suitably bent at both ends with neccessay angle iron upright and end support for mains (SD 70) |
| 26 | Supply and fixing of 16 Amps DP Switch with metal clad of 500 V with fuse and neutral (Side Handle) on suitable TW Box PWD Earthing(SD 141) |
| 27 | Earthing as per the ISI specification with an earth electrode of 2.1 mt class \"B\" GI pipe of dia not less than 40mm, with copper earth plate of size 125mmx50mmx6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC coverslab for the brick masony. (SD 233) |
| 28 | Supply and fixing of 15A aeriual fuse unit(500A) on suitable 100x100 mm TW concealed box with hylem sheet on on the tapping pole with necessary clamps (SD 128) |
| 29 | Supply and Fixing of TNEB meter Board suitable for 32A single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earthlink (1\"x1/8\" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection with 7/20 PVC insulated copper wire from EB meter to fuse unit,(SD 125). |
| 30 | Supply and Fixing of 5A or 10 Amps AC Single phase 230 V , 50 HZ watt hour metre on Suitable TW box complete with earth connections. (SD 124) |
| 31 | TNEB charges for new service connection main including all cost and conveyance etc., complete. |
| 32 | Providing andfixing 110mm dia PVC Rain water down fall pipe eith necessary specials with all cost andconveyance or material cost and all labourcharges etc, complete as per standard specification |
| 33 | Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14 SWG TC wire for making good ofthe concealed portion with suitable colour for PVC concealed light point / Fan point (For electronic regulator). (SD 22) |
| 34 | Supply and fixing of 1200mm (48\")A C ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp(S D 110) |
| 35 | Supply and fixing of 20W 4 Feet LED Fitting with LED including all labour charges etc., complete as per standard specifications. |
| 36 | Supply and fixing of 30W LED Street Light Fitting with LED including all labour charges etc., complete as per standard specifications. |
| 37 | Wiring with 2X1.5 sq mm (22/0.3) P V C insulated S C, unsheated Cu. Conductor of 1100 V grade in suitable P V C rigid pipe on wall and ceiling with P V C accessories 100X113mm TW switch box for 5 A3 pin non interlocking C S plug with painting of suitable colour with contineous earth wire connection of 14 SWG TC wire for open P V C plug point( S D 36) |
| 38 | Painting and letteringarrangements for using best and approved colour including allcost and conveyance of materials to site and all labour cahrges etc. complete as per standard specification. |
| 39 | Supplying and fixing of Innaguration function of Tablet Stone and other items of expenditure with all cost and conveyence of material and labour cost at site etc., complete as per standard specification |
