Tender For Construction Of Stores At Beml Rc-Ii Kgf; BOQ LINE ITEM 1 Dismantling & breaking for walls, slab, floors, beams, lintels, windows, chajjas and plastering etc. stacking materials as directed 4 M3 BOQ LINE ITEM 2 Dismantling and breaking of Brick/rubble masonry built in Cement Mortar. 4 M3 BOQ LINE ITEM 3 Excavating in trenches in hard/dense soil, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation etc. and getting out 10 M3 BOQ LINE ITEM 4 Returning and filling in around the side foundation with approved earth of non-swelling type, free from organic materials, including spreading watering and well ramming in 25 cm layers complete all as specified & directed by E-I-C. 2 M3 BOQ LINE ITEM 5 Removing excavated material to a distance of 500M and depositing where directed 14 M3 BOQ LINE ITEM 6 Providing PCC 1:4:8 using 40mm graded granite aggregate in foundations, filling and mass concrete. etc., including necessary formwork etc., complete all as specified and shown on drawing. 2 M3 BOQ LINE ITEM 7 Reinforced cement concrete design mix M-20 using 20mm graded aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, underreamed piles and mass concrete. 9 M3 BOQ LINE ITEM 8 Supplying, straightening, bending, cutting, including wastage, hooking, bending, placing and binding in position as per drawings and details,(Including cost of binding wire, welding if required etc. complete)for all works such as beams lintels, slabs, etc. Using TMT steel bars. 450 KG BOQ LINE ITEM 9 Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes. 17000 KG BOQ LINE ITEM 10 Supplying and fixing, fabrication and erection of Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. 1000 KG BOQ LINE ITEM 11 Preparing the surface & applying two coats of enamel paint over a coat of primer etc., complete. 600 M2 BOQ LINE ITEM 12 Supply and fixing of Pre- painted Galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws as specified. 800 M2 BOQ LINE ITEM 13 Supply and fixing of 0.56 mm thick Plain, Aluminum sheeting, in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) 50 M2 BOQ LINE ITEM 14 Steel double leaf doors including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded including painting with one shop coat of zinc chromate primer filling in panels shall be measured separately. 100 M2 BOQ LINE ITEM 15 2mm thick fiber glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. 100 M2 BOQ LINE ITEM 16 Providing and constructing brick masonry 230mm thick with first class burnt bricks in CM (1:6)including raking of joints scaffolding, curing etc. complete as specified and directed for walls, partitions supports etc. in Super structure above plinth up to 5.0 m 16 M3 BOQ LINE ITEM 17 Rendering 10mm thick on fair faces of brick work or concrete surfaces Cement plaster 1:4 to be finished even and smooth (without using extra lime or cement) 140 M2 BOQ LINE ITEM 18 Priming plastered and other surfaces with alkali resistant priming paint and applying two coats of distempering with distemper oil emulsion white or tinted. Using first class materials and approved colour etc. complete all as specified and directed. 140 M2 BOQ LINE ITEM 19 Supply, installation, Testing and commissioning of Lighting system with 1 AU (a) 1.1 KV grade 2.5 Sq.mm multistrand Copper cable for Lighting & Exhaust Fans (6 Amps) - 600 M Approx. (Red, Black & Green-200 M Each) (b) 4 Sq.mm for multistrand Copper cable for Power Points(16Amps) - 300 M (Red, Black & Green-100 M Each) and suitable Switch, Socket, MCB etc. (Total cumulative cost of Sl. No 20 to 24). Unit prices can be quoted at its respective Sl. No 20 to 24. BOQ LINE ITEM 20 Supply, installation, Testing and commissioning of 120 Watts LED light Fittings. Recommended Makes: Bajaj, Havells, Halonix, GM & Glync Tech 20 NO BOQ LINE ITEM 21 6A switch and Socket Recommended Makes: Anchor, Havells, GM 20 NO BOQ LINE ITEM 22 16 A Switch & Socket Recommended Makes: Anchor, Havells, GM 10 NO BOQ LINE ITEM 23 600 mm Sweep Exhaust fans Make :Bajaj, Crampton, GM , Havells 10 NO BOQ LINE ITEM 24 BLDC Ceiling Fans Sweep: 120 mm Makes: Bajaj, Halonix, Havells, GM 10 NO
