|
| 1 | 117.30 Chipping of unsound/weak concrete material from slabs,beams, columns etc. with manual Chisel and/ or bystandard power driven percussion type or of approved make including tapering of all edges, making squareshoulders of cavities including cleaning the exposedconcrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge17.30.3 25 mm average thickness |
| 2 | 10.42 Providing and laying 1st class quality vitrified floor tilesin different sizes (thickness to be specified by themanufacturer) with water absorption less than 0.08% andconforming to IS: 15622- 2017, of approved make, in all colours and shades, laid over 20mm thick cement mortar1:4 (1 cement : 4 fine sand), jointing with grey cementslurry @ 3.3 kg/ sqm including grouting the joints withwhite cement and matching pigments etc. all complete as per direction of the Engineer-in-charge.10.42.1.1 Size of tile 600 mm x 600 mm 10.42.2 Double charged Stainfree vitrified tiles (Glossy)10.42.2.1 Size of tile 600 mm x 600 mm |
| 3 | 10.40 Providing and fixing 1st class quality ceramic glazed walltiles conforming to IS : 15622- 2017 (thickness to bespecified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-in charge in skirting, risers of steps and dados, laid over 12mm thick bed of cement mortar 1 : 3 (1 cement : 3 finesand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment ofmatching shade etc. all complete as per direction of theEngineer in-charge.10.40.2 600 mm X 300 mm in all shades and design |
| 4 | 14.23 Dismantling old plaster or pointing, raking out joints,cleaning and preparing the surface for re-plasteringor re-pointing including disposal of rubbish to thedumping ground with all leads and lifts etc.completeas per direction of the Engineer- in-charge. |
| 5 | 13.30 Repairs to plaster of thickness 12 mm to 20 mm inpatches of area 2.5 sqm and under including cutting thepatch in proper shape and preparing and plastering thesurface of the walls complete including disposal ofrubbish to the dumping ground with all leads and lifts including finishing even and smooth and curingcomplete as per direction of the ngineer in charge: 13.30.2 With cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 6 | 19.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, havingthermal stabilityforhot & cold water supply including al lCPV Cplain & brass threaded fittings including fixing thepipe withclampsat 1.00mspacing. This includes jointing of pipes & fittings with one step CPVC solvent cementand testingof joints complete asper directionofEngineer in Charge. Internal work -Exposed on wall19.7.3 25 mm nominal outer dia .Pipes. |
| 7 | 19.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold wate rsupply including al lCPV Cplain & brass threaded fittings including fixing the pipe with clampsat 1.00mspacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testingof joints complete asper direction of Engineer in Charge. Internal work -Exposed on wall.19.7.2 20 mm nominal outer dia .Pipes. |
| 8 | 12.56 Wall painting with acrylic plastic emulsion paint ofapproved brand and manufacture to give an even shade[Payment shall be made after submission of Test Certificate issued by the Manufacturer] : 12.56.1 Two or more coats on new work |
| 9 | Dismantling and disposal of damaged doors to disposal site as per direction of Engineer-In- Charge |
| 10 | 8.18Providing and fixing ISI marked flush door shuttersconforming to IS: 2202 (Part I) decorative type, core ofblock board construction with frame of 1st class hard wood and well matched teak 3 ply veneering withvertical grains or cross bands and face veneers onboth faces of shutters. 8.18.1 35 mm thick including ISI marked Stainless Steel butthinges with necessary screws. |
| 11 | 13.33 Removing white or colour wash by scrapping and sandpapering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 12 | 12.19 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 13 | 16.1 Providing and fixing aluminium work for doors,windows, ventilators and partitions with extruded builtup standard tubular sections/ appropriate Z sectionsand other sections of approved make conforming toIS: 733 and IS : 1285, fixing with dash fasteners ofrequired dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides withrequired EPDM rubber/neoprene gasket etc. Aluminiumsections shall be smooth, rust free, straight, mitred andjointed mechanically wherever required including cleatangle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as perarchitectural drawing and the direction ofEngineerincharge. (Glazing and paneling and dashfasteners to be paid for separately) :16.1.1 For fixed portion of approved quality:16.1.1.1 Anodised aluminium (anodised transparent or dyed torequired shade according to IS: 1868, Minimum anodic coating of grade AC 15). |
| 14 | 16.1.2 For shutters of doors, windows & ventilators includingproviding and fixing hinges / pivots and makingprovision for fixing fittings wherever required includingthe cost of EPDM rubber / neoprene gasket required ( Fittings shall be paid for separately):16.1.2.1 Anodised aluminium (anodised transparent or dyed torequired shade according to IS: 1868, Minimum anodiccoating of grade AC 15). |
| 15 | 16.3 Providing and fixing glazing of approved quality inaluminium doors, windows, ventilator, shutters andpartition etc. with EPDM rubber / neoprene gasket etc.complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paidin basic item) :16.3.1 With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm ) |
| 16 | 18.7 Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps,32 mm C.P. brass waste ofstandard pattern, including painting of fittings andbrackets, cutting and making good the wallswherever require :18.7.2 White Vitreous China Wash basin size 630x450 mm with asingle 15 mm C.P. brass pillar taps. |
| 17 | 18.2 Providing and fixing white vitreous china pedestaltype water closet (European type W.C. pan) with seatand lid, 10 litre low level white P.V.C. flushingcistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixturescomplete including cutting and and making good the wallsand floors wherever required : 18.2.1 W.C. pan with ISI marked white solid plastic seat and lid |
| 18 | 18.10 Providing and fixing Stainless Steel AISI 304 (18/8)kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittingsand brackets, cutting and making good the wallswherever required: 18.10.1 Kitchen sink with drain board 18.10.1.4 460x915 mm bowl depth 178mm. |
| 19 | hinges with necessary screws. |
