Tender For Special Repair To Jcos Accommodation Building No P 11A At Klp Of Certain Unit Under Ge Dehu Road; 1 Taking out existing water proofing treatment including cement plaster(any no of layers) on roof surfaces, cleaning the surfaces and removing the debris outside MOD land complete all as specified and as directed. 2 Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. specifically provided for complete all as specified and directed. 3 M & L for providing 25 mm thick PCC 1:2:4 type B1 ( using 20mm graded stone aggregates ) as in filling in levelling course one roof slab complete all as specified and directed. 4 Extra over rendering for work in isolated width such as in bands, sunk pannels, cornices, skirting sides of slabs, parapet sides and top drip moulds etc and similar work not exc 15 cm width or girth complete all as specified and directed. 5 Supply only Liquid water proofing compound. 6 M/L for cleaning the plastered / concrete surfaces with wire brushes and applying water proofing treatment as under :-(a)Apply one coat of oil bituminous primer @ 1.20 kg/Sqm over concrete surface.(b)Laying APP Polimerised modfied membrane not less than 3 mm thick and weighing not less than 3.0 kg per Sqm by torch applicaton method.(c)The overlap for APP membrane shall be 75 mm on longitudinal direction and 100 mm on transverse direction (d) Finally applying a coat of solar reflective bitumiious aluminium paint @ 0.15 Kg/Sqm over the membrane. 7 Disconnecting existing PVC water tanks of capacity 500 litres, setting aside (or lowering if required) for replacement complete all as specified and as directed. 8 S & F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe spouts for connecting inlet, outlet, over flow and washout pipes all as specified and as directed. 9 Taking up or down steel tubing and connections including cleaning for refixing or removing to storeof 15 mm bore of pipe complete all as specified and as directed. 10 Taking up or down steel tubing and connections including cleaning for refixing or removing to store of 20 mm bore of pipe complete all as specified and as directed. 11 M & L for 15 mm boreGI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed. 12 M & L for 20 mm boreGI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed. 13 S & F in repairsball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore and fixed (minimum weight 210 gms) complete all as specified and as directed. 14 S & F in repairs 20mm diaGun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and as directed. 15 S&F in repairs 15 mm diabib taps chromium plated fancy type, screwed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe complete all as specified and as directed. 16 S & F in repairs 15 mm dia pillar taps fancy type cromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe complete all as specified and as directed. 17 S&F in repair Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15 mm dia all as specified and as directed by Engineer-in-Charge 18 S&F in reapir Stop valves/angle valve, 15 mm fancy type, chromium plated with screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed 19 S&F in reapir Stop valves, 15 mm fancy type, chromium plated with long shank and cup (concealed type)screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed 20 S&F in repairs Grating doom 100 mm size of PTMT (Minimum weight 25gms.) complete all as specified and as directed. 21 S/F in repairs Vitreous china wash basin white flat back size (630x450) mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand along with 32mm dia CP waste coupling and UPVC waste pipe incl Bottle trap of PTMT 32mm dia having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms)complete all as directed. 22 S& F in repairs stainless steel Sinks for kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete including fixing cantilever brackets and connecting union to waste pipe and coupling complete all as specified and as directed. 23 S & F in repairs for PVC connection pipe 15mm dia with PTMT nuts of length 450mm complete all as specified and as directed. 24 S&F as in repairsPVC low/highlevel flushing cristern white 10 litre capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl brackets all as directed. 25 S&F as in repairs vitreous china squatting pan ORRISA PATTERN size 580x440mm white with integral foot rests excluding flushing cistem & fush pipe fixed in repairs complete all as specified and as directed. . 26 S & F in repairs 600xmmx450mmmirror of selected quality galss, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. 27 Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar 100 mm dia pipes all as specified and directed by Engineer-in-Charge. 28 S&F, PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls, or laid in trenches bore of pipe 110 mm dia complete all as specified and directedby Engineer-in-Charge. 29 S&F,110 mm dia PVC (SWR) bends, any radius with access door complete all as specified and directedby Engineer-in-Charge. 30 S&F, 110 mm dia PVC (SWR) vent cowl complete all as specified and directedby Engineer-in-Charge. 31 Dismantling floor, hearth or wall tiling of any description or mosaic floor or mosaic wall surface, including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as speicfied and directed. 32 M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.06 sqm but not exceeding0.11 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete. 33 M&L Vitrified coloured Ceramic tiles of light colour shade 8 to 10 mm thick (square/rectangular) polished, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6, complete all as specified and directed. 34 Ditto as per itemNo 33 above but on skirting over 10 mm th rendering in CM 1:4 complete all as specified and as directed. 35 M & L Glazed ceramic colour tiles in vertical surface 450mm x350x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tilesincl backing coat 10mm thick in CM 1:4all as direced. 36 Dismantlingof stone slabs and tilesof any description or thickness in floors aprons laid and bedded and jointed in cement mortar complete all as specified and as directed. 37 M&L prepolished machine cut Kota stone 20 to 25mm thick in tread of steps, landingor floor set and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 15 mm thick screed bed or bedding layer of cement 1:6 including front nose moulding & two groove along the length of treads complete all as specified and as directed by Engineer-in-Charge 38 All as per Srl Item No 37 above but in riser of steps, dado orskirting set and jointed in neat cement slurry and pointed in white or coloured cement to matchincluding backing coat 10 mm thick in CM 1:4complete all as specified and as directed. 39 M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, window soffit and jambs, pillars, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade including 15 mm thick screed bed or bedding layer of cement 1:6 complete all as specified. 40 M&L for providing edge to moulding to 18-20mm thick marble stone any description including machine polishing to edge to give high gloss finish ect complete all as specified and as directed by Engineer-in-Charge 41 Taking down plaster from chajja/facia etc including dismantling of damaged concrete and repair the same with 75 mm thk concrete 1:1.5:3 type A0 on chajja,including necessary formwork, applying 10mm thick plaster in CM 1:3 mixed with WPC @3% by weight of cement (WPC shall be measured and paid for separately) finished even and smooth using extra cement with out extra cost including two coats of cement base paint over one coat of primer and necessary preparation all as specified and directed. 42 Demolition of cement concrete ( unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. 43 M & L for cement concrete Type C2 1:3:6(using 40mm graded aggregates) as in plinth protection 75 mm thick in panels including provision of joijnts and bitumen filling,finished top surface even and smooth without using extra cement complete all as specified and as directed. 44 M & L for 100 mm thick Cement concrete type D-2 1:4:8(40 mm graded aggregate) as in sub base complete all as specified and as directed. 45 M & L forprecast concrete interlocking paver block rubber moulded any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment over 25 mm thick sand cushioncomplete all as specified and as directed. 46 Taking down chowkhats or frame with shutter (without taking off shutter from the frames) & removing from site exc. 1.5 Sqm but n. exc. 4 Sqm each complete all as specified and as directed. 47 –Ditto- as item No 46 above but n.exc. 1.50 sqm each complete all as specified and as directed. 48 Taking down shutters of any description exc. 1 sqm and not exc. 2 sqm each complete all as specified and as directed. 49 Taking down steel window/ventiltors of any size complete all as specified and as directed. 50 Cutting holes in brick walls exc half brick but n exc one brick, built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfast and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required -depth of embedded portion of holdfast or lugsmeasured from the face of jamb into the wall - exc. halfbrick but n exc. one brick complete all as specified and as directed. 51 S&Ffor pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm complete all as specified and as directed. 52 S&Ffor pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm complete all as specified and as directed. 53 M/L for PCC 1:2:4 type B1 in door frame filling all as specified and directed. 54 S&F factory made 35 mm thick plain framed paneled shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with Commercial veneered on both faces the size of rail and style as per IS-1003 ( Pt-I) kiln seasoned and Chemically pressed of 2nd class hard wood complete all as specified and as directed. 55 S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge(divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, including mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 mm sizes of members of shuttersas specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified. 56 S&F aluminium anodised powder coated three track sliding window with frame (minimum of powder coating 50 micron) with 4mm thick tinted glass and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18 mm width aperture for mosquito proofing including necessary jointing cliths, locking arrangements, rubber packing, aluminium snap beading, aluminium screws,aluminium fittings, good quality bearing handle and glazing clips etc,fabricated using following aluminium powder coated sections conforming to catalogue of JINDAL or of equivalent make complete all as specified and directed by Engineer- in -Charge. (a) Bottom frame- 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352. (Note:- Cost ofTinted glass & wire cloth shall be included in the quoted rate of the item) 57 S&F aluminiumdecogrill 7.5mm thick with necessary channels,frame and clips, complete all as specified and as directed 58 S & F louvered powder coated aluminium ventilators including frame with adjustable luvers with provision of fixing exhaust fanfixed with and incl 4mm thk frosted glass louvers and sall be fly proof with stainless steel wire gauge of 0.36mm dia and 1.18mm aperture fixed to frame with aluminium beading and following aluminium powder coated sections conforming of `JINDAL or of equivalent make and rubber beading etc all as directed. (a) SP20048 (b) Glazing clipa 19352 Note : Cost of glass louvers and wire cloth shall be incl in the quoted rate of the items 59 Supply and fixing Fiber Glass Reinforced plastic (FRP) Foor Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shallbe filled with suitable wooden block in all the three legs.The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame, complete as specified by the manufacturer and as per directions of Engineer-in-charge 60 S&F 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant gradeunsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge. 61 S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 mm complete all as specified and directed. 62 S & F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 mm complete all as specified and directed. 63 S & F 150 mm size extruded aluminium alloy handles,fabricated type anodised complete all as specified and as directed 64 S & F aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt 150mm complete all as specified and as directed 65 S & F aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt 100mm complete all as specified and as directed 66 S& F 100 mm But hinges,stainless steel, bright polished and fixed, type B-11 all as specified and directed 67 S & F aluminium alloy , anodised , sliding door bolt with hasp , staple ( bolt type) & fixing clips of sheet, cast or extruded section & fixing bolts & sliding bolts of extruded section or cast aluminium alloy & fixed - length of bolt 250 mm complete all as specified and as directed 68 S&F in repairs floor door stopper with overall length of cover plate is 150 mm, of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed 69 Dismantling of boarding, any description and fixed in any position with nails complete all as specified and directed. 70 Dismantling timber fillets under40 Sq.cm in section unframed work , in any position complete all as specified and directed. 71 S & Fpre-laminated particle board 25mm thick exterior grade prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work incl 6mm thick teak wood lipping patti complete all as specified and as directed. 72 S &F Veneered decorative plywood, grade I (with BWR resin) decorative veneers on one side decorative and other side white laminate fixed with screws to timberframe work of 12mm thickness, 7 No. of ply for shelves complete all as specified and directed. 73 S&F Extra over rates of 25mm thick block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails complete all as specified and as directed 74 S & F of 2nd class hard wood as in scantling timber framed and fixed,clean sawnsecured with nailscomplete all as specified and directed. 75 S&F in repairs continuous Piano type hinges mild steel bright finish or electrogalvanised (width of flap 40 mmwhen open) complete all as specified and as directed 76 S & F of 100 mm size brass hasp and staple safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. 77 Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed. 78 M&L for rendering cement plaster 15 mm thick in CM 1:6 on fair faces of brick walls finished even and smooth w/o using extra cement complete all as specified and as directed. 79 M & L for Rendering 5 mm thick cement plaster on concrete surface of ceiling in cement mortor 1:3shall be even and smooth without using extra cement complete all as specified and as directed. 80 M&L for rendering cement plaster 15 mm thick in CM 1:4 on fair faces of brick work or conrete wall surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. 81 M & L for Preparation of newly plastered surfaces of wall and appling two coats of oil bound distemper on walls over a coat of primer on plastered surfaces complete including 3mm thick wall care putty complete all as specified and as directed. 82 M&L for preparation of newly plastered surfaces of ceiling andapplying two coats of distemper oil emulsion over and including a coat of priming complete all as specified and as directed. 83 M & L for Preparation of newly plastered surfaces of wall and appling two coats of premium acrylic smooth exterior paint with silicone additives on external surfaces of wall including primer (Two or more coats applied at 1.43 ltr/10 sqm over and including priming coat of exterior primer applied at 2.20 kg/10 sqm)and preparation of surfaces as per manufacturers instruction all as specified and directed by Engineer-in-charge. 84 Complete removal of existing treatment from old decorated surfaces of walls prepration of surfaces and applying two coats of distemper oil emulsion over and including a coat of priming plastered completeall as specified and directed by Engineer - in -Charge. 85 Complete removal of existing treatment from old decorated surfaces of walls prepration of surfaces and applying two coats of premium acrylic smooth exterior paint with silicone additives on external surfaces of wall including primer(Two or more coats applied at 1.43 ltr/10 sqm over and including priming coat of exterior primer applied at 2.20 kg/10 sqm) and preparation of surfaces as per manufacturers instruction all as specified and directed by Engineer-in-charge. 86 M&L for one coats of oil bound distemper paint on old decorated surfaces of ceiling including preparation of surfacescomplete all as specified & directed by Engineer-in-Charge. 87 M&L for preparation of newwooden surfaces, of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified 88 M & L for preparationof old painted wooden surfaces of any description over 10cm width or girthand applying two coat of synthetic enamel paint complete all as specified & directed by Engineer-in-Charge. 89 M&L for preparation of new painted steel surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified & directed by Engineer-in-Charge. 90 M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified & directed by Engineer-in-Charge. 91 Excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil.all as specified and directed by Engineer-in-Charge. 92 Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortat for150 mm dia pipes, all as specified and directed by Engineer-in-Charge. 93 M&L for reinforced cement concrete pipes class NP-2 , laid in trenches & jointed complete with collars, dia of pipe 150 mmcomplete all as specified and directedby Engineer-in-Charge. 94 M&L concrete bed to drain pipe of 150 mm dia including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate complete all as specified and as directed by engineer-in-Charge 95 Returning, filling in, including spreading, levelling, watering and well ramming in layersnot exc 25 cm. in hard/dense soil. complete all as specified and as directed by engineer-in-Charge 96 Removing excavated material (Soil)exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and as directed by engineer-in-Charge 97 Demolition of cement concrete (reinforced )as in manholes cover complete all asspecified and directed by Engineer-in-Charge. 98 M&L for precast cement conrete (1:2:4) type B-1 (20mm graded stone agg) as in cover slabs for man holes, set and jointed in CM (1:4) complete all as specified and directedNote:- Reinforcement shall be measured and paid separately. 99 M&L for mild steel TMT bars 6 to 8 mm and over dia cut to length, bent to shape required incl cranking, bending, hooking ends & binding with & incl mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directedby Engineer-in-Charge. 100 Demolition of brick work or stone/boulder masonry including all quoins, arches, pillars etc , precast concrete articles and precast concrete block wallingbuilt in cement mortar complete all asspecified and directed by Engineer-in-Charge. 101 M & L for brick work with sub class B bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed by Engineer-in-Charge 102 Demolition of cement concrete (unreinforced) in Suken portionexe 15 cm thickness (below or aboveground level) complete all as specified and directed. 103 M & L cement conrete 1:7:12 type F2(uisng 40mm graded aggregate) as in sunkun filling complete all as specified and directed. 104 Providing and carrying out water proofing treatment to toilet ,sunken slabs ,wet areas etc,after proper surface prepration ,carry out cementitious ingection grouting at leakage point using Cebex 100 plasticised expanding grouting admixture ,application of polymer modified at slab wall junction using Nitoband SBR latex screed modifier cum bonding agent and application ot two coats of brushbond RFX two part acrylic polymer modified cementitious elastomeric waterproof and protective coating etc,complete including 15 mm thick cement plaster in CM 1:4 all tools and plants as per manufacturers specification paint complete all as specified and directed. 105 M&L for Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high complete all as specified and directed. 106 S&F in repair plate rack made of stainless steel 0.63 mm thick kitchenincluding fixing overall size 915mm x 915mm x 255 mm all as specified and directed. 107 Cutting chases, pinning in. making good to facings brick work where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girt complete all as specified and as directed 108 Supply and Laypipe galvanised Medium class including fitting complete 40 mm dia complete all as specified and as directed 109 Supply and Laypipe galvanised Medium class including fitting complete 25 mm dia complete all as specified and as directed. 110 Supply and Laypipe galvanised Medium class including fitting complete 20 mm dia complete all as specified and as directed. 111 Supply and fix gate valve stop screwed 20 mm complete all as specified and as directed. 112 Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out all as specified and directed :-(a) Soft / loose soil 113 (b) Hard / dense soil 114 M&L for MS Work i:e includes material,cutting,welding,other process forshaping of material to get into required shape as per site requirment and fixing on site.Note: Earthwork will be measured and paid separately 115 Taking down carefully old/ damaged/unserviceable copper/ aluminium pointwiring (light, fan, socket or power) complete, (fittings such as switchs, ceiling roses, pendents, regulators sockets etc. to be measured seperately), removing materials to store for keeping insafe custody for ruse at site and making good disturbed surfaces of wall, floors etc. comlete all as specified. 116 Taking down carefully byold/ damaged/unserviceable unscrewing from boards/outlets boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators etc complete all as specified. 117 Taking down carefully fan any type complete deposited in MES E/M store complete all as specified. 118 Material and labour for Sub-main wiring complete with 6 sqmm single core PVC insulated but unsheathed multistranded copper conductor cable 1100 V grade drawn through concealed PVC conduit with wall thickness not less than 1.8 mm incl sunken type pressed steel terminal boxes including 6 sqmm single core PVC insulated but unsheathed copper conductor grade 1100 V grade cable as earth continuity wire complete all as specified. (two run 6 sqmm and one run 6 sqmm) 119 Point wiring complete with 1.5 Sqmm single core PVC insulated but unsheathed copper conductor FRLSH cable 650/ 1100 V grade drwn through concealed PVC conduit thickness not less than 1.8 mm of suitable size as per site requirement including tees, junctions etc fixed on wall/ floor/ ceiling etc including 1.5 Sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire including PVC sunken type terminal box of suitable size with top cover and PVC board of required size fixed with wall surface by means of brass screws and sunk/cupwashers, for mounting of switches fan regulators etc.a) One lightpoint controlled by one one way switch 120 b) One lightpoint controlled by one two way switch 121 c) One Fan/Exhaust fan point controlled by one switch 122 d) One switch socket 5 pin 5 Amps flush type on same board. 123 e) One switch socket 5 pin 5 Amps flush type on Independent board. 124 f) One bell/ buzzer point controlled by one push button on the same board withother switches or independent 125 (g) One 3 pin socket outlet. 15 amps, independent, with cables 4 sq.mm size 126 (h) One 3 pin socket outlet, 15Amps, independent, with cables 4 sq. mm size for Geyser point 127 Supply & Fixing ofBLDC Ceiling fan of 1200 mm sweep 3 blade in white/ brown/ Ivory clolor withregulators, with down rod AC single phase, 230 V, 50 Hz, 5 star rating including provision of cable from ceiling rose or connector to ceiling fan complete all as specified.Note : Old Fan to be deposited in MES store. 128 Supply & Fix of Arteor modular mirror/graphic/wood/leather type, white/black/gold/metal finish color switch1 way, 6 Amps, 1 modue complete all as specified. 129 Supply & Fix of Arteor modular mirror/graphic/wood/leather type, white/black/gold/metal finish color switch1 way, 16 Amps, 1 modue complete all as specified. 130 Supply & Fix of Arteor modular mirror/graphic/wood/ leather type, white/black/gold/metal finish color Bell push switch 1 way, 6 Amps, 1 modue complete all as specified. 131 Modular switch 2 way 6A, 1 module. 132 Supply & Fix of Arteor modular mirror/graphic/wood/ leather type, white/black gold/metal finish color socket 5 pin 6 Amps, 2 modue complete all as specified. 133 Supply & Fix of Arteor modular mirror/graphic/wood/ leather type, white/black/gold/metal finish colorsocket 5 pin 6/16 Amps, combination type2 modue complete all as specified. 134 Supply & Fix of Arteor modular mirror/graphic/wood/ leather type, white/black/gold/metal finish color Fan regulator 120 Watt2 module complete all as specified. 135 Supply & Fix of Arteor modular mirror/graphic/wood/ leather type, white/black/gold/metal finish color cover plate frame, 2 module complete all as specified. 136 Supply & Fix of Arteor modular mirror/graphic/wood/ leather type, white/black/gold/metal finish color cover plate frame, 4 module complete all as specified. 137 Supply & Fix of Arteor modular mirror/graphic/wood/ leather type, white/black/gold/metal finish color cover plate frame, 6 module complete all as specified. 138 Supply & Fix of Arteor modular mirror/graphic/wood/ leather type, white/black/gold/metal finish color cover plate frame, 8 module complete all as specified. 139 Supply & fix of metal flush boxes mounting 2 module, made of MS chromium plated complete all as specified. 140 Supply & fix of metal flush boxes mounting 4 module, made of MS chromium plated complete all as specified. 141 Supply & fix of metal flush boxes mounting 6 module, made of MS chromium plated complete all as specified. 142 Supply & fix of metal flush boxes mounting 8 module, made of MS chromium plated complete all as specified. 143 Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed. 144 Supply and fix electronic meters temper proof LCD display with polycarbonate cover 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time,current reading, load, PF, voltage and KWH 145 Supply and fix LED security/ street light 30 W IP 65 Die cast Aluminium extruded housing with reflector and enclosed with toughened glass IP 65for 1Wx15/18 Nos LEDs and Driver incl pipe & clamps all as specified & Directed. 146 S & F of16 way SPN DB made of CRCA sheet, RAL 9003, powder coated for IK-09 double door, IP-43 glazed door, confirms to IS-8623-1, IEC 61439-1&3, 240 v with 200 amps rated bus bar , ready to use DB insulated phase busbar, neutral bars with shrouds, earth bar, sticking saddles, cement spill protector, color coded interconnecting wire set, cable ties, blanking plates & circuit identification label with provision for DP, MCB/ Isolator/RCCB/RCBO as incomer & SP MCBs as outgoing all as specified . 147 S & F of2 way SPN DB made of CRCA sheet, RAL 9003, powder coated for IK-09 single door, IP-43 glazed door, confirms to IS-8623-1, IEC 61439-1&3, 240 v with 200 amps rated bus bar and 10A MCB , ready to use DB insulated phase busbar, neutral bars with shrouds, earth bar, sticking saddles, cement spill protector, color coded interconnecting wire set, cable ties, blanking plates & circuit identification label with provision for DP, MCB/ Isolator/RCCB/RCBO as incomer & SP MCBs as outgoing all as specified. 148 S & F of 6 way TPN DB made of CRCA sheet, RAL 9003, powder coated for IK-09 double door, IP-43 glazed door, confirms to IS-8623-1, IEC 61439-1&3, 415 v with 200 amps rated bus bar , ready to use DB insulated phase busbar, neutral bars with shrouds, earth bar, sticking saddles, cement spill protector, color coded interconnecting wire set, cable ties, blanking plates & circuit identification label with provision for FP, MCB/ Isolator/RCCB/RCBO as incomer & SPN MCBs as outgoing all as specified. 149 Supply & fix offour pole RCBOs, earth leaking protection F/pi-4 sensitinity 100MA, 63 Amps complete with C/D charactrstic all as specified. 150 Supply & fixing in replacement of MCB TPN (3P+N), 415 Volts, 50HZ, 10KA Brecking capacity, C/D characteristics of capacity 63 Amp complete all as specified. 151 -ditto- but MCB SPN 32 Amp, 250 Volts. 152 -ditto- but MCB SPN 40 Amp, 250 Volts.. 153 Supply & fixing in replacement of MCB SP 250 Volts, AC, 50 HZ, 10 KA, C/D Charactristic of capacity 6 to 10 Amp complete all as specified. 154 -ditto- but 16 Amp (Cat pat No 604953) (Legrand) 155 Supply, install, testing & commissioning ofStorage type water geyser, electric driven (single phase), capacity25 Litres, BEE 5 star rated vertical/ horizantal type, Rust proof body, including PTMT pipe for Cold & HOT water from ball valve to inlet & oulet of geyser respectively complete all as specified & directed by Engr-in-charge. 156 Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete 157 Supply & fixing in replacement with new LED tube light POLYCARBONATE FIXTURE 20W 158 Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. 159 Supply & fixing in replacement of inverter LED bulb B-22, , IP-20, inbuilt battery backup 10W, 160 M & L for Modular Bell, Ding Dong AC. 230 volts, single pole fitting complete. 161 M & L 3 terminals Ceiling rose, AC, 230 V, PVC/ polycarbonatecomplete all as specified. 162 Supply & fixing in replacement of LEDsDecorative wall mounted dia-cast Al. LED fixture with ivory/white/Gold coating for up-down accent lighting in the module of Xing Hexa/ Penta/ Round/ Square/OVAL of capacity 14/18 Watts complete high power low heating superflux LEDs, 100 lumen/ watt, 120-270 V AC inbuilt electronic driver all as specified. 163 Supply & fixing in replacement of LED BED Lamp fitting POLYCARBONATE FIXTURE for 12 watts LEDs. 164 S & Laying in repair/ replacement cable XLPE insulated screened PVCbedded ,galvanized steel strip or wirearmoured ,electric power cableheavy duty1100 voltsgrade with strandadaluminum conducter of followingsizes:-(a) 25 Sqmm x 3.5 Core 165 (b) 95 sq mm x 3.5 core 166 Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point of any type of excavation all as specified and directed by Engineer -in-Charge. 167 M & L for High density ERW PIPE of pressure rating 6 kgf/cm2 fixed/ laid in complete to walls, ceilings or in floors, trenches etc. for cable protection of the following outer dia :- (a) 50 mm dia 168 (b) 80 mm dia 169 Supply and install, testing and commissioning of FEEDER BOX Outdoor with double door, roof canopy, Angle iron pedstal frame 450 mm high above from ground level housing cucible type, panel working on 440 V 50 Hz AC supply with built in arrangement for Capacitors banks with controllers and switchgear. It shall be extendible at both ends with aluminium busbar. fully compartmentaliseddust proof and vermin proof made out of 3.15 mm thick CRCA sheet steel enclosure painted and suitable for outdoor IP-55 Protection, weather conditions as per specification & accommodate the following controls and as shown in single line diagram :-(a) MCCB four pole 300 Amp 36 KA,Ics=Icu=100% - 1 Nos (for main incomer)(b)TPN MCB 63 Amp 25 KA,Ics=Icu=100% - 4 Nos (for outgoing to family qtrs)(h) Ammeter (0 - 100 A) - 1 No.(j) Voltmeter (0 - 500 V) - 1 No.(k) CTs 100/ 15 ma - 1 Set(l) Busbar capacity of 400AComplete wiring of panel, PCC & Installation all as specified. 170 M&L for road cutting and making good with PCC 1:3:6 type C-2(using 40 mm graded stone aggregate) complete all as directedby Enger -in- charge. 171 S/F in repair Meter box 2mm thick MS sheet powdr coated of size 2300mm x 2000mm X 400mm split in two parts 1700mmX1000mm on top for refixing the meters and .6X 1 mtr for fixing of MCCB and DB.The top portion should be provided with glass of size 10cm x 10cm infront of each meters to facilited recording of meter reading and including provision of wooden block of suitable size to fix the meters and DBs,door with locking arrangement and box to be fabricated such as theMCBs can be operated form out side including Removing and refixing of meters(4 Nos) and supply and fix the following:- Switch Fuse unit TPN-63 Amps 240 V-04 NosMCB SPN 240 Volts 40 Amps including connections complete from electric meter - 18 Nos. Note: rate quoted also includes fixing of the DB completely on walls with necessary cable for internal wiring in the DB,lugs insulators Etc and making good the disturdbed surface to match with the existing. 172 Supply & fix in replacement of Modular USB socket of 2 module complete with input 250V & output is 12/24 V DCwith two USB cord arrangement complete all as specified. 173 Supply & fix in replacement of Modular chargeble Detachable Emergency lightcomplete with input 250V complete all as specified. 174 M& L for Earthing complete with Galvanised steel earth plate electrode 60 cmx 60 cm x 6.3 mm thick buried bellow ground level connected to galvanised earth lead directely in ground earth pit not less than 3.20 mtr by using GI Strip 25 X 4 mm by means of bolts , nuts, check nuts, and washer of galvanisediron or steel all as shown in electrical plate No-3 SSR Part-1 of2009 connecting to earthing test point all as specified anddirected ,including necessary excavation and earth work in any type of soil ,concre pit CI frame and cover with locking arrangement all as specified and directed by Engr . In charge. Note: Rate quoted deemed to be includingexcavation by compressor M/C for Soft disintegrated rock to required depth.
