|
| 1 | Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-charge. |
| 2 | Providing and laying Vitrified tiles in floor in different sizes ( thickness to be specified by the manufacturer) with water absorbtion less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand) jointing with gray cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.11.41A.1 Double charge vitrified tiles polished finished of size11.41A.1.1 Size of tiles 600x600 mm |
| 3 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, racking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per direction of Engineer-in-chargee.14.1.2 with cement mortar 1:4 ( 1 cement: 4 find sand) |
| 4 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 5 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. 13.48A.1 New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm |
| 6 | Providing and fixing 35 mm thick factory made laminzted veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 ( Part B ), fixing with butt hingeg of required size with necessary screws, all complete as per direction of Engineer-in-charge and panelling with panels of , ( Note:- Butt hinges and necessary screws shall be paid seperately).9.6.312 mm thick one side pre-laminated particle board ( decorative lamination on one side and other sides balancing lamination) grade-1 , medium density flat pressed , three layer paticle board FPT-1 conforming to IS : 3087 bonded with BWP typesynthetic resin adhesive as per IS: 848 and prelaminated conforming to IS: 12823, Grade 1, Type II marked. |
| 7 | Providing and fixing ISI marked IS : 453 oxidised M.S. double acting spring hinges with necessary screws ctc complete ( Copper oxidised as per IS 1378)9.60.1150mm |
| 8 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @120 grams/ sqm, both side inclusive) consisting of main \"T\" runnerwith suitably spacedjoints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm andsecondary cross \"T\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle ofsize 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. |
| 9 | Providing and fixing chromium plated brass handles with necessary scrwes etc. complete9.92.1125 mm |
| 10 | Providing and fixing chromium plated brass 100 mm mortic latch and lock with 6 levers and a pair of handles of approved quality with necessary screws ctc. Complete |
| 11 | Providing and fixing precoated galvanised iron profoile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS:277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheer and polyster top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-Charge. The sheet shall be fixed using self drilling/ self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitchin horizoontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses annd including cutting to size and shape wherever required.12.1.1 1.00 mm thick with zink coating not less then 275 gm/m2 |
