Repairs In Compliances With Accessibility Standards For Pwds In H. No.E-43, Sector-14 P.U. Campus, Chandigarh-- 1 Civil Work 2 12mm cement plaster of mix 3 1:4 (1 cement: 4 fine sand) (Ref:-13.1.1) 4 Providing and laying 40mm thick factory(M-30) made chamfered edge machine moulded interlock paver blocksof approved make reflective matt finish of any colour laid over 100 mm thick cement concrete 1:8:16 with 20 mm thick cement mortar 1:4. Complete in all respect to the entire satisfaction of the engineer-in-charge. (Ref:-N.S.) 5 Providing and laying vitrified floor tiles in different sizes with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm(Ref:-N.S.) 6 Providing and laying chequerred precast cement concrete25mm thick of two colours i.e. Red and Grey in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles laid on 20mm thick cement mortar 1:4. Complete in all respect to the entire satisfaction of the engineer-in-charge. (Ref:-N.S.) 7 Providing and fixingMS Railing 3-0 high made of MS box section frame. The top rail of railing shall be 40x40x5mm thick M.S. box and enclined 4 nos. M.S. flat 50x6mmthick @ 9 c/c to be provided. The vertical section of railing40x40x5mm box section at after every 2-6 to be placed. The rates inclusive one coat primer and two coats of approved synthetic enamel paint. complete in all respect to the entire satisfaction of the Engineer In Charge.(Ref:-N.S.) 8 Providing and laying Anti skid floor tiles of size 300x300mmof 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. (Ref:-N.S.) 9 Providing and fixing 1st quality ceramic glazed wall tiles (8”x12”) (200mmx300mm) conforming to IS: 15622, of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. . (Ref:-N.S.) 10 Providing and fixing 2mm thick homogenous PVC antistatic vinyl flooring plain or coloured or carved or mosaic or meta led finish manufactured by using the latest calendering technology with high class conductive material and suitable amount of specialpurpose additives like pigments, lubricants, plasticizers, and stabilizer complete in all respect to the entire satisafction of the engineer in charge.(Ref:-N.S.) 11 Providing & laying P.C.C. 1:8:16 (1 Cement : 8 coarse sand: 16 coarse aggregate)with stone ballast 32mm guage in foundation and plinth. Complete in all respect to the entire satisfaction of the Engineer-in-charge.(Ref:-N.S.) 12 Providing & fixing 3mm thick threaded/lined aluminium strip /profileL- shape of 32mm wide & 25mm down vertically to be fixed in existing flooring or any other surface with aluminium screws & synthetic adhesive(araldite). Complete in all respect to the entire satisfaction of the engineer in-charge.(Ref:-N.S.) 13 Public Health Work 14 Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 5km for all lifts, complete as per directions of Engineer-in-charge. (Ref:- 1.1.18) 15 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50m and lift up to 1.5m,disposed earth to be levelled and neatly dressed. 16 All kinds of soil(Ref:- 2.6.1) 17 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 18 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) (Ref:- 4.1.3) 19 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement : 20 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)(Ref:- 5.2) 21 Centering and shuttering including strutting, propping etc. and removal of form for : 22 Suspended floors, roofs, landings, balconies and access platform. (Ref:- 5.9.3) 23 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. 24 TMT bar10 mm dia (Ref:- 5.22.6) 25 Providing and laying Anti skid floor tiles of size 300x300mmof 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. 26 12 mm cement plaster of mix : 27 1:6 (1 cement: 6 fine sand) (Ref:- 13.1.2) 28 Distempering with oil bound washable distemper of approved brand and manufacture to give 29 New work (two or more coats) over and including priming coat with cement primer. (Ref:- 13.41.1) 30 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade 31 Two or more coats on new work (Ref:- 13.61.1) 32 Demolishing brick work manually / by mechincal means including stacking of serviceable material and disposal of unserviceable material with in 50 metres lead as per direction of Engineer In -Charge. 33 In cement mortar (Ref:- 15.7.4) 34 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 35 Of area 3 sq. metres and below (Ref:- 15.12.1) 36 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50metres lead. (Ref:- 15.25) 37 Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead:(Ref:- 15.40) 38 Thickness up to 40 mm(Ref:- 15.40.1) 39 Demolishing cement concrete manually/ by mechanical means including disposal of material with in 50 metres lead as per direction of Engineer in charge. 40 1:4:8 or leaner mix(Ref:- 15.2.2) 41 Dismantling G.I pipes (external work) including excavation andrefilling trenches after taking out the pipes maually / by machincal means including stacking of pipes with in 50 metres lead as per direction of Engineer - in charge: 42 15 mm to 40 mm nominal bore (Ref:- 15.44.1) 43 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes, lead at site within 50 metre lead as per direction of Engineer-in-charge: 44 Up to 150 mm diameter wash room (Ref:- 15.45.1) 45 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres 46 Providing and fixing collar: (Make:- SKF) 47 100 mm 48 Sand cast iron S&S as per IS - 3989(Ref:- 17.57.1.1) 49 75 mm 50 Sand cast iron S&S as per IS - 3989(Ref:- 17.57.2.1) 51 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 52 100 mm inlet and 75 mm outlet 53 Sand cast iron S&S as per IS - 3989 (Ref:- 17.60.2.1) 54 Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall . 55 15 mm dia nominal bore (Ref:- 18.11.1) 56 20 mm dia nominal bore 57 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 58 15 mm nominal bore. (Ref:- 18.47.1) 59 20 mm nominal bore. (Ref:- 18.47.2) 60 Cutting holes up to 30x30 cm in walls including making good the same: 61 With F.P.S. bricks (Ref:- 18.76.1) 62 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter: 63 100 mm (Ref:- 17.58.1) 64 75 mm 65 Providing and fixing unplasticised PVC connection pipe with brass C.P. Nuts collar and bush of approved quality colour. 66 45cm length 67 15 mm nominal bore with 45cm length. (Ref:- 18.21.2.2) 68 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 69 20 mm nominal bore (Ref:- 18.17.1A) 70 Providing And Fixing white vitreous chinaware pedestal type water closet (European type W.C.pan ) with seat and lid, 10 litre low level white P.V.C flushing cistern with manually controlled device ( handlelever), conforming to IS: 7231, with all fittings and fixtures complete including cuting and making good the walls and floors wherever required: 71 W.C. pan with ISI marked white solid plastic seat and lid (Ref:- 17.2.1) 72 Providing and fixing soil, waste and vent pipes 73 100mm dia. 74 Sand cast iron S& S pipe as per IS: 3989 (Ref:- 17.35..1.2) 75 Providing and fixing soil, waste and vent pipes 76 75 mm diameter : 77 Centrifugally cast (spun) iron socketed pipe as per IS: 3989. (Ref:- 17.35.2.2) 78 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc.complete: 79 25 to 40 mm Nominal bore (Ref:- 18.13.1) 80 Providing and fixing C.P. brass stop cock (concealed) with caps including SS flange. Complete in all respect to the entire satisfaction of the engineer in-charge. 81 15 mm nominal bore (Ref:- 18.52.1) 82 Providing and fixing in position15mm C.P. Brass long body(620gmweight) bib cock, complete in all respect to the entire satisfaction of the engineer-in-charge. 83 15 mm nominal bore (Ref:- 18.15.1) 84 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : 85 White vitreous china wash basin size 550x400 mm with a pair of 15mm C.P. brass pillar taps (Ref:- 17.7.3) 86 Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (Ref:- 17.31) 87 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand ) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : : 88 For pipes 100 to 230 mm diameter(Ref:- 19.21.1) 89 Providing and fixing square-mouth S.W. gully trap grade A’ complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 90 100x100 mm size P type 91 With F.P.S. Bricks class designation 75 (Ref:- 19.4.1.1) 92 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. (Ref:- 22.5) 93 Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (Ref:- N.S.) 94 Providing and fixing in position15mm i/d C.P. Brass short body with S.S. flange bib cock, complete in all respect to the entire satisfaction of the engineer-in-charge. 95 15 mm nominal bore (Ref:- N.S.) 96 Providing and fixing 15mm C.P. brass Angle cock and SS flange of approved quality.complete in all respect to the entire satisfaction of the engineer-in-charge. : 97 15 mm nominal bore (Ref:- N.S.) 98 Providing and fixing C.P. towel Ring complete with PVC rawl plug and C.P. Brass screws with concealed fittings of approved quality and colour.Complete in all respect to the entire satisfaction of the engineer-in-charge(Ref N.S) 99 Providing & fixing factory made commercial flush shutter/door of 30mm thickISI marked and lipped all around with hollock wood margin including Hollock wood chowkhats size 60mm x 90mm along with oxidized MS fittings i.e. handle, hinges, tower bolt including 1.0mm thick mettalic laminate sheetfixed up to 4’ height on both sides and on thickness wise on shutter. Complete in all respects to the entire satisfaction of Engineer-in-Charge. (Ref N.S) 100 Providing and fixing Jet connection alongwith 450mm long pipe for water closet. Complete in all respect to the entire satisfaction of the engineer-in-charge.(Ref N.S) 101 Providing & fixing32mm diaCP brass Bottle trap round shape (Cylindrical or as per requirement) with wall flange. .and sinkbottel trap 38 mm single piece moulded worh higet of 270 mm effective length of tail pipe 260 mm from the centre of the waste coupling 77mm breadth with 25 mm minimum water seal, weithing not less than 263 gms.Complete in all respects as per entire satisfaction of the Engineer-in-Charge 102 32 mm dia. (Ref N.S) 103 Providing & laying P.C.C. 1:8:16 (1 Cement : 8 coarse sand: 16 coarse aggregate)with stone ballast 32mm guage in foundation and plinth. Complete in all respect to the entire satisfaction of the Engineer-in-charge.(Ref N.S) 104 Providing & Laying Half Brick masonry work with F.P.S. bricks of class designation 100 insuperstructureabove plinth level upto floor V level. complete in all respect to the satisfaction of the engineer in charge. 105 Cement mortar 1:4 (1 cement :4 coarse sand)(Ref N.S) 106 Providing and fixing in position 15mm dia CP Brass nipple(1 to 2 long) to various fittings.Complete in all respect to the entire satisfaction of the engineer-in-charge.(Ref N.S) 107 Providing and fixing Single socketed on wall face unplasticised Rigid UPVC pipe (6 kg per Sqcm pressure) of size 100mm diaconforming to IS : 13592 Type A, including jointing with necessary Tee and Bend conforming to IS : 5382, leaving 10 mm gap for thermal expansion.complete as per entire satisfaction of the Engineer-in-Charge. 108 100mm dia (Ref N.S) 109 Providing and layingBrick work with F.P.S. bricks of class designation 100 (average compressive strength not less than 105 kg per sq.cm.)in Foundation and plinthin : 110 Cement mortar 1:6(1 cement : 6 coarse sand)(Ref N.S) 111 Providing & Fixing the 25mm dia stainless steel pipe in any shape (at any level) in vertical/ Horizontal position of 780mm longin size to be fixed as per site with necessary C.P.brass screws and rawl plugs.Complete in all respect to the entire satisfaction of the engineer in charge.(Ref N.S) 112 P/Fixing the 25mm dia stainless steel pipe in any shape (at any level) in vertical/ Horizontal position of 835mm longin size to be fixed as per site with necessary CP brass screws and rawl plugs.Complete in all respect to the entire satisfaction of the engineer in charge.(Ref N.S) 113 Providing and fixing 32mm dia G.I.waste pipe along with elbow or bend. complete in all respect to the entire satisfaction of the engineer-in-charge. (RefN.S) 114 Providing & fixing in position food grade double layer polyethylene PVC water storage tank ISI:12701 (at all floor levels) with cover & suitable locking arrangement including necessary holes for inlet, outlet, overflow pipes, tank nipple(2 nos.) etc. Complete in all respect to the entire satisfaction to the Engineer-in-charThe work includes tank based support of9” brick work (height of base as per site) in any form and base filled with sand, final top layer with 25mm thick concrete of 1:2:4 ratio duly plastered with 12mm thickness all around the tank including cement coating. Complete including the necessary G.I. fittings/tank nipple of required size to tank in all respect to the entire satisfaction to the Engineer-in-charge (RefN.S) 115 Providing and fixing 1st quality ceramic glazed wall tiles (8”x12”) (200mmx300mm) conforming to IS: 15622, of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.(Ref:- N.S)
