E-Quotations Are Invited For Ascertaining Rate Of Items For Preparing Estimate Of Construction Of Jsfc Godown 1000 Mt Rajmahal , Design, Supply, Fabrication, Transportation, And Installation Of Truss-Less Self-Supported Arch Roofing System Over The Specified Warehouse Structure. All Materials, Consumables, Labor, Tools, Machinery, And Incidental Items Shall Be Included In The Quoted Price. ________________________________________ 1. Site Details: • Project Type: Warehouse Roofing • Span (Clear): ± 21.80 Meters • Arch Rise: 3.00 Meters (Span/5) • Length Of Shed: ± 46.50 Meters • No. Of Bays: 1 • Eave Height: 5.60 Meters (Approx.) ________________________________________ 2. Roofing System Requirements: • Type: Truss-Less (Self-Supported Arch Type) Roofing System • Design: To Be Structurally Stable Without Any Intermediate Truss Or Support, Suitable For Clear Span Of 21.80 Meters And Arch Rise Of 3.00 Meters • Roof Coverage Area: Approx. 1,013.7 Sq.M (21.80 M × 46.50 M) ________________________________________ 3. Material Specifications: • Sheet Material: Color Coated Colorbond® Zincalume® Steel • Coating Type: Az150 (Al-Zn Alloy Coating, 150 G/M² Total On Both Sides) • Standard Compliance: Astm A 792 • Base Metal Thickness (Bmt): 1.10 Mm • Total Coated Thickness (Tct): 1.075 Mm • Width Of Coil: 912 Mm To 1010 Mm • Tolerance: ±2 Mm ________________________________________ 4. Additional Requirements: • Installation: Complete Laying And Fixing Of Roofing With Overlaps And Arching To Specified Dimensions Using Hydraulically Operated Mobile Forming Machinery. • Fasteners: High Tensile, Corrosion-Resistant Self-Drilling Screws With Epdm Washers To Be Used As Per Manufacturer Recommendations. • Sealants/Consumables: All Sealants, Fasteners, Insulation Pads, Edge Closures, Etc., Required To Ensure Weather-Tight Performance Shall Be Included. • Workmanship: Roofing System Shall Be Free From Dents, Scratches, Warping. Finish Should Be Smooth And Uniform In Color. • Drainage/Gutters: (Specify If Required) ________________________________________ 5. Design & Load Considerations: • Wind Load: As Per Is 875 Part 3 (Latest Revision) • Live Load & Dead Load: As Per Is 875 Part 2 • Seismic Consideration: As Applicable Per Is 1893 • Deflection Limits: As Per Is 800 ________________________________________ 6. Quality Control & Inspection: • All Material To Be Accompanied By Manufacturers Test Certificates. • The Roofing System Shall Be Inspected And Approved Before And After Installation By The Engineer-In-Charge. ________________________________________ 7. Warranty: • Minimum 10 Years Warranty On Material For Corrosion Resistance And Color Stability. , Supplying & Installation Of Single Turbo Ventilators 2300 Cfm, Size 24, Aluminum Construction With Skylight Of 2Mm Thick Size 2 X 07 Ft. - With Complete Fixing Accessories , Supplying & Installation Of Hangers / Clamps (For Light Hanging Purpose).All Materials, Consumables, Labor, Tools, Machinery, And Incidental Items Shall Be Included In The Quoted Price. , Supply, Installation, Testing & Commissioning Of Weighbridge. All Materials, Consumables, Labor, Tools, Machinery, And Incidental Items Shall Be Included In The Quoted Price. Structuraldetails Type Of Platform Fully Welded Modular Type Weighbridge Main U-Beam 300 Mm X 140 Mm - U Beam (E – 350 Grade H T Plate) Cross Support 16 Mm Thick Plate Between Two Main Long Beam Top Plate 8 Mm Top Plate With Anti-Skid Strips Foundation Frame 100 Mm X 50 Mm Long Frame With Fully Welded 350 Mm X 350 Mm X 16 Mm Plane Plate Border Frame 100 Mm X 50 Mm - Both Side Heavy Duty Frame With Side Wall Mounting Load Cells Ms Plates 150 Mm X 150 Mm X 16 Mm - Load Cell Top & Bottom Plate Joint & Assembly Main Beam, Cross Support & Top Plate Completely Welded To Each Other. Guide Rail Round Pipe Based Side Frame - Ø 100 Mm - Both Side Fasteners As Per Required & Is Standard Paint 2 Coat Of Ant-Corrosive Primer And 2 Coat Enamel Paint Material All Material Will Be Is 2062 Standard Material List For 7.5 X 3.0Meter/ 50 Ton Weighbridge Weighbridge Platform Structure- U-Beam Type Modular Orthotropic -01 No. • All Material Will Be Is 2062 Grade • Painting : 2 Coat Primer With Enamel Paint ( Make : Burger / Asian / Shalimar) • All Standard Joint Assembly, Nut & Bolts, Foundation Plates Etc…. • Fully Welded Modules. • European Design U Beam Orthotropic Design. • Virgin Material Branded Moc Jindal / Essar / Sail. • Value Engineering Modular Design. Heavy-Duty Load Cell -04 Nos. • “Eagle/Avery/Mettller” –Double Ended Share Beam Type Load Cell-30T Each... • Analogue Type Load Cell • With Ip68 Protection Class. • Special Diagnostic Feature • Unique Data String, Cannot Be Copy Or Replace. • Load Cell Mounting Assembly With Inbuilt Lightning & Surge Protection. Electronics Digitizer (Smart Intelligent Terminal System) -01 No. • No Need To Use Computer System For Our Smart Terminal • “Flying Eagle/Avery/Mettller” • Direct Connect Dot-Matrix Printer • Full Graphical Lcd Display (130 X 40 Mm). • 0 To 45 C Dust Free Environment. • Three Step Software Calibration & Smart Calibration To Correct Small Errors & Accurate Readings. • Inbuilt 200000 ~ 250000 Memories Storage Facility. • Usb Port For Data Entry And Back Up. • Usb Interface Facility For Data Backup In External Memory Stick (Pen Drive). • Vehicle Vise Data Entry And Report Printing • Multi Level Password For Security - Dynamic (Otp System) & Regular Password Facility. • All Date Entry Show In Single Window • External Smps Power Supply For Load Cell & Other System Safety. • Auto Sms Facility. • Optional Facility To Send Sms Of Weighment Records. Junction Box (Summation Box) - 01 No. • High Protection Junction Box With Gd Tubes & Built In Surge & Lightning Protection • Water Proof Cable Pg-9 Gland(Ip67 Protected) External Metal Box With Locking Facility For Extra Load Cell Cable & Junction Box-01 No. Usb – Key Board For Weighment Data Entry -01 No. “Tvs” – Make Dot Matrix Printer -01 No. Jumbo Display – 50 Mm- 01 No. E – Soft -Weighbridge Management Software -01 No. Load Cell Cable (Shielded) -Junction Box To Digitizer-20 Meter Accessories (Cable, Connectors & Data Signal Cable Etc….) - 01 Set. • Flexible Conduct Pipe 1 Meter For Each Load Cell (Rat Protection) • Power Cable For Digitizer • Rs 232 Interfacing Cable-2 Meter (Communication With Pc) , Supply, Installation, Testing And Commissioning Of Rs Pro Square Wall Mounted, Window Mounted Extractor Fan, 190L/S, 50Db, External 2 Speed Reversible On/Off Control , Supply, Installation, Testing And Commissioning Of Energy Saving Long Life Corrosion Resistant , Vertical Mounted Pressure Die-Cast Aluminium Housing Well Glass Luminairies With High Power Led As Light Source. , Supply, Fitting, Fixing, Commissioning And Testing Of 100 Kva , 11 Kv/0.433 Kvsealed , Deta/Star, Vector Group Dyn11, Outdoor, Oil Cooledtypeonan Off Circuitstar Rating Transformer With Copper Wound Transformer And Civilfoundation Work Along With Required Size & Length Of Ms Channels As Per The Norms 100 Kva Outdoor Transformer With All Accessories As Per Is- 1180 Of 2014, Air Filled Cable Box Suitable For 11Kv 1 Run , 3C 35 Sqmm Xlpe Al. Armoured Cable For 1.1Kv, 1 Run, 3.5Cx 150Sqmm Xlpe Al. Armoured Cable As Required. ( Make:-Abb/Voltam/ Gtb/ Kirloskar / Bharat Bijlee/ Indcoil Transformers Pvt Ltd) Apart- From The Above Standard Fittings Followings Items Should Be Included:- Capacity- 100 Kva Installation - Outdoor No. Of Phase-Three Voltage 11Kv/433V Vectro Group -Dyn11 Duty- Continuous Tapping In Primary-+/- 5% To -10% In 2.5 Steps Type Of Tap Changer-Octc Cooling - Onan Insulation Class-A Temp. Rise @ 50 Deg. C. Ambient Oil By Thermo Meter :- 50 Degree C. In Winding By Resistance :- 55 Degree C. , Supply, Fitting, Fixingand Commissioning Of Isi Marked Aluminium Cable Conductor Xlpe Pvc Insulated Cable As Per Is:7098 Armoured, Served, Sheathed, 11Kv Grade. , Supply, Fitting, Fixing, Commissioning And Testing Of Solar Led Standalone Street Light( 45W Led) Withlowmaintenance Lead Acid Battery For 3 Day Backup: A Led Based Solar Street Lighting System Consisting Of Pv Modules, Electronics ,Lead Acidbattery, And Led Based Luminaries All Suitably Mounted On A 6.0M Tubular Pole Above Ground , Base Plate Etc As Required Included . The Battery Of 160(2X80ah) Is Charged By Electricty Generated Through The Pv Module Panel (200 I.E 100X2 )During Day Time And The Luminaries Provides Light From Dusk To Dawn. Specification Of Of Solar Led Standalone Street Light: Poly Crystalline Silicon Solar Panels, High Lumen Led Formax. Efficiency With Lifetime> 50,000 Hrs Cri Nominal 70. Pressure Die Cast Aluminium Ip66 Enclosure. Controller To Charge Batteries & Microcontroller For Autonomously Determination Of Sunrise & Sunset. Specific Deep Discharge Batteries Are Used To Store The Energy. Metal Battery Box To Be Fitted At 3.0M Height. , Add 18 % Gst , Add 1% Labour Cess
