Tender For Renovation And Repair Work At Van Vihari Mandir, Nathuwas Goshala, Nathdwara - 1 Providing And Fixing Complete Bansi Paharpur Stone Elevation Including 2 Nos Of Bansi Paharpur Stone 9X9X6 Height Carving Pillar And 02 Nos Of Bansi Paharpur , nathdwara-Rajasthan

Tender For Renovation And Repair Work At Van Vihari Mandir, Nathuwas Goshala, Nathdwara - 1 Providing and fixing complete Bansi Paharpur stone elevation including 2 nos of Bansi Paharpur stone 9x9x6 height carving pillar and 02 nos of Bansi Paharpur 9x4.5x6 half craving pillars.Base stone for pillars of size 156x11x4 and floweral design at raised tibari floor square and rectangular pillar above rounded carving stone pillar and dab stone at top of arches including 03 Nos Bansi Paharpur stone arches approx. size (43x26x4thk) with both side carving as including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade complete in all respect as per satisfication of Engineer-In-Charge. Including all scaffolding,necessary clamping, fastners and fittings etc. as and where requirerd.(payment shall be made for the total area of opening)as per attached drawing no. NTB/VV/01 2 Providing and fixing complete Bansi Paharpur stone elevation including 2 nos of Bansi Paharpur stone 4.5x4.5x6 height carving half pillar and 02 nos of Bansi Paharpur 4.5x4.5x6 half craving pillars.Base stone for pillars of size 156x11x4 and floweral design at raised tibari floor square and rectangular pillar above rounded carving stone pillar and dab stone at top of arches including Bansi Paharpur stone arches approx. size (43x26x2thk) with both side carving as including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade complete in all respect as per satisfication of Engineer-In-Charge. Including all scaffolding,necessary clamping, fastners and fittings etc. as and where requirerd.(payment shall be made for the total area of opening)as per direction of EIC. 3 Providing and fixing Bansi Paharpur stone chajja 50 mm thick and upto 80 cm projection supported with Bansi Paharpur Stone Toddies of size (200x200x100mm thick) having distance 600mm c/c and 2 extra toddies at every corner if required.Bansi Paharpur Stone Chajjali 250mm wide and 40mm thick through out chajja lenght with necessary clamping and fittingsincluding pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade complete in all respect as per satisfication of Engineer-In-Charge. Including all scaffolding,calmping fastners and fittings etc. as and where requirerd.(payment shall be made for the total length of chajja)as per attached drawing no.NTB/VV/05 4 Providing and fixing Bansi Paharpur stone Jarokha over existing windows having the bottom Bansi Paharpur stone sillwith carving as approved by Engineer-In-Charge of approx. size 66x23x4thick the base of the stone sill supported with Bansi Paharpur stone todies 08 Nos for bottom shelves of size 18x18x4 thk .The chajja of Jarokha supported with 4Nos Bansi Paharpur Stone full pillars size 4x4x6 and 2Nos Bansi Paharpur Stone half pillar of size 4x2x6 with3Nos Bansi Paharpur Stone Mehrab approx size (450x600x50mm thk) front facing and 2Nos Bansi paharpur stone Mehrab of size (300x600x50mm thk) with both side carving . The top of the window is supported by Bansi Paharpur stone chajja 50mm thick and upto 450mm projection. The chajja is supported by 8Nos Bansi Paharpur stone toddies of size(175mmx175mmx100mm thk).Stone jali 50mm thick and 350mm height is fixed between the pillars and top and bottom is decorated by ansored patti 100mm wide.complete in all respect as per satisfication of Engineer-In-Charge. Including all scaffolding clamping and fastners etc. as and where required.The joints are filled with white cement/epoxy mortar including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade.(payment shall be made for the total Number of Jhrokha)as per attached drawing no. NTB/VV/02 5 Providing and fixing Bansi paharpur sand stone jali 50mm thick and 600mm height as per ornamental design to fixed with white cement/epoxy mortar including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade as approved by Engineer-In-Charge as per attached drawing no. NTB/VV/06 6 Providing and fixing Bansi paharpur sand stone post (Mataga) having size 100x100mm height 900mm as per ornamental design such as like flower octonogal head border etc. to fixed with white cement/epoxy mortar including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade.as approved by Engineer-In-Charge as per attached drawing no. NTB/VV/06 7 Providing and fixing complete Bansi Paharpur stone elevation including 2 nos of Bansi Paharpur stonehalf Carving pillar of size (300x150x2300mm) .Base stone for opening of approx size (2900x400x150mm thk) with floweral design at raised floor square and rectangular pillar above rounded carving stone pillar and dab stone at jambs and lintel 400mm wide and 50mm thick throughout opening. The Dab stone fixed with adhesive and admixture.Bansi Paharpur stone arches of approx size (2850x1550x150mm thick) with both side carving as including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade complete in all respect as per satisfication of Engineer-In-Charge. Including all scaffolding,necessary clamping, fastners and fittings etc. as and where requirerd.(payment shall be made for the total area of opening)as per attached drawing no. NTB/VV/03 8 Providing and fixing complete Bansi Paharpur stone elevation including 2 nos of Bansi Paharpur stonehalf Carving pillar of size (150x75x1650mm) .Base stone for opening of size 2000x250x150mm thk with floweral design at raised floor square and rectangular pillar above rounded carving stone pillar and dab stone at jambs and lintel 250mm wide and 40mm thick throughout opening. The Dab stone fixed with adhesive and admixture.Bansi Paharpur stone arches of approx size (2000x1000x75mm thick) with both side carving as including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade complete in all respect as per satisfication of Engineer-In-Charge. Including all scaffolding,necessary clamping, fastners and fittings etc. as and where requirerd.(payment shall be made for the total area of opening)as per approved design and drawing by Engineer-In-Charge.as per attached drawing no. NTB/VV/04 9 Providing and Fixing of Bansi Paharpur sand stone Mehrab in existing opening at site having carving as per existing mehrab at site.50 mm thick Both Side carving as per approved by Engineer-In-Charge. Including all scaffolding,necessary clamping, fastners and fittings etc. as and where requirerd.(payment shall be made for the total area from bottom line of meharab to apex line) 10 P/F of 50mm thick Bansi paharpur sand stone sill and jambsin the existing opening complete. The stone sill and Jambs fixed with adhesive and admixture as approved by Engineer-In-Charge including all scaffolding and necessary clamping and fiittings. 11 Providing & fixing double leaf fully pannelled door shutters with frame having details as per drawing approved by EIC with approved fittings as per mentioned below.A) FRAME -Size 150x75mm.The frame Shall be made ofMP teak wood grade I high seasoned).B) SHUTTERS - MP teak wood grade Itop rail - 150x50mmlock rail - 150x50mmbotom rail - 150x50mmstyles - 150x50mm intermidiate members both (horizontal & vertical) - 50x50mmC) PANEL - both side teak face 12mm thick water proof marine ply (green / century)D) FITTINGS - Brass aldrops make magnum code 7006/70 450x16mm (2 no.)Top tower bolt make magnum code 5312/53 305x9.5mm (3 no.)Bottom tower bolt make magnum code 5306/53 152x9.5mm (1 no.)Handle make magnum code 6448/64 305mm (4 nos.)Door stoper make magnum code 6120/61 105x26mm (2 no.) back door silencer (PVC) (2 no.)Hinges make magnum code no.2808/28 102x70x3 (4 no. for each shutter) 12 Providing and fixing nijharna light brown marble stone slabs with thin & light strips table rubbed & ordinary-polish,16 mm thick on floor, laid on 25mm (Av) thick base of CM 1:6 (1 cement : 6 coarse sand)jointingwith white cement with pigment to match the shade of the marble slab including grinding,rubbing and ordinary polish etc. complete as approved by EIC. 13 Providing and fixing Bansi Paharpur sand stoneBansi Paharpur Stone Toddies of size (300x300x100mm thick) 14 Bansi Paharpur Stone Carving half Pillar of size 100 x 100 x1800mm height 15 Providing and fixing Marble stone Rajnagar 1st qualityflooring table rubbed, 30 mm thick over 30mm (Av.) thick base of CM 1:4 (1 cement : 4 coarse sand) jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete and as per direction of engineer incharge

INR 2360 /-

INR 494980.0 /-

INR 2.47 Crore /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB