|
| 1 | Item No.1:- Excavation for foundation in Hardmurumincluding removing the excavated materials upto a distance of 50 meters beyond the building area and lift as specified stacking and spreading as directed including dewatering unless provided elsewhere preparing the bed for the foundation and necessary back filling, remming, watering complete including shoring and strutting etc. complete. |
| 2 | Item No.2:- Excavation for foundation in Hard Strata of Hard Rockincluding removing the excavated materials upto a distance of 50 meters beyond the building area and lift as specified stacking and spreading as directed including dewatering unless provided elsewhere preparing the bed for the foundation and necessary back filling, remming, watering complete including shoring and strutting etc. complete. |
| 3 | Item No. 3:- Providing and laying in situ plain cement concrete M 100 of trap metal for foundation and bedding including dewatering with formwork, compacting and curing etc. complete. |
| 4 | Item No. 4:- Providing and casting in situ cement concrete M 200 of trap metal for R.C.C. Footing ofcoloum moulded or chamfered as per dewatering or as directed by Engineer in charge roughening the explosed faces if special finish is to be provided and curing. |
| 5 | Item No. 5:- Providing and casting in situ cement concrete M 200 of trap metal forR.C.C. coloumn moulded or chamfered as per dewatering or as directed by Engineer in charge roughening the explosed faces if special finish is to be provided and curing. |
| 6 | Item No. 6:- Providing Laterite Stone masonry in cement morter 1:6 in foundation and plinth of inner walls, including bailing out water manually, striking joints on unexposed faces, and watering etc. complete. |
| 7 | Item No. 7:- Providing and casting in situ cement concrete M 20 of trap metal for R.C.C. Lintel & beams to plinth or parapet, moulded or chamfered as per dewatering or as directed by Engineer in charge roughening the explosed faces if special finish is to be provided and curing. |
| 8 | Item No. 8:- Filling in plinth and floors with approved excavated materials in 15 cm to 20 cm layers including watering and compaction complete. |
| 9 | Item No. 9:- Providing soling using 80mm size trap metal in layer of 15cm each including filling voids with sand ramming watering etc. complete. |
| 10 | Item No. 10:- Providing laterite stone masonry in cement morter 1:6 in superstructure, including striking joints, racking out joints watering scaffolding complete. |
| 11 | Item No. 11:- Providing and fixing frame with / without ventilator of size as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete. |
| 12 | Item No. 12:- Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete |
| 13 | Item No. 13:- Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. |
| 14 | Item No. 14:- Providing and fixing 30mm thick PVC FLUSH L DOOR SHUTTER consisting of panelof hollow PVC profile of 20 mm thickness consisting frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mminserted inside the hollow sectionof stiles rails top ?and bottom rails and two 19x 19 mm MS tubes inserted horizontally inside the hollow profile section using 4/5 mm sheet using screws hollow profile shall be lipped with 10 mm (5mm x2) thick x 20 mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thicktermite proof waterproof plain /prelam PVC sheet using solvent cement on the both sides of the panel including stainless steel fixtures and fastening etc. Complete asper direction of Engineer incharge, manufacturers specification and drawing |
| 15 | Item No. 15:- Providing and laying Cast in situ/ Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/ pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).withfullyautomaticmicroprocessorbasedPLCwithSCADAenabledreversibleDrumTypemixer/concreteBatchmixplant(Panmixer)etc.complete. With fine aggregate (Crushed sand VSI Grade) |
| 16 | Item No. 16:- Providing and laying Cast in situ/ Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering , formwork, coverblocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 17 | Item No. 19:- Providing and fixing in positionTMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 18 | Item No. 20:- Providing cement plaster 12 mm thick in single coat in cement morter1:4 with neeru finish to concrete or brick surface in all position including scaffolding and curring etc. complete. |
| 19 | Item No. 21:- Providing cement plaster 6 mm thick in single coat in cement morter1:4 withneeru finish to concrete or brick surface in all position including scaffolding and curring etc. |
| 20 | Item No. 22:- Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. |
| 21 | Item No. 23:- Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface, applying the acrylic wall putti & primer etc. complete |
| 22 | Item No. 24:- Providing and applying two coats of waterproof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. |
| 23 | Item No. 25:- Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc.complete |
| 24 | Item No. 26:- Providing and layingceramic tiles of IS Std.of approved quality 30 x 30 Cm.size for dado and skirting in required position with ready made adhesive morter of approved quality in required position after making the wall portion in level in plaster of cement morter 1:4 including joint filling with white colour cement slurry, cleaning, curring, complete. |
| 25 | Item No. 27:- Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float filling joints with neat cement slurry, curing, polishing, moulding edges, cleaning complete. a) Marble other than white makrana |
| 26 | Item No. 28:- Providing and fixing mild steel grill work for windows, ventilators, etc 15 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. |
| 27 | Item No. 29:- Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour power coatingAnodising without box |
| 28 | Item No. 30:- Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating without box |
| 29 | Item No. 31:- Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approvedqualityetc.complete |
| 30 | Item No. 32:- Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc.complete. |
| 31 | Item No. 33:- Providing and fixing white glazed earthenware Wash Hand Basin of 45 cm x 30cm size including cold water pillar tap / cold and hot water pillar tap brackets, rubber blugs and brass chain, stop tap and necessary pipe connection including P.V.C |
| 32 | Item No. 34:- Providing and fixing 100 mm dia. waste water & soil pipe UPVC/SOIL/VENT/WASTE/SWR pipe of required diameter confirming to IS -13592 and IS -4985 to withstand continous internal hydraulic pressure of 4 kg/cm2 including necessary fixture |
| 33 | Item No. 35:- Providing, Conveying & hoisting and fixing in position high density polythin UV stabilised confirming to IS 12701, Water storage tank with necessary connection, testing etc.complete (Prior approval of sample and brand by Executive Engineer |
| 34 | Item No. 36:- Providinf and fixing Ultra voilet stabilised PVC plumbing pipes of 15 mm specified outer diameter of required Standard thickness confirming to IS 4985 including necessary fittings confirming to IS 7834 such as PVC bends vees reducers clamps plugs |
| 35 | Item No. 37:- Providinf and fixing Ultra voilet stabilised PVC plumbing pipes of 25 mm specified outer diameter of required Standard thickness confirming to IS 4985 including necessary fittings confirming to IS 7834 such as PVC bends vees reducers clamps plugs |
| 36 | Item No. 38:- Providing & fixing 15mm dia screw down bib/stop tap of brass of approved quality and make including necessary sockets, union nut, testing etc. complete |
| 37 | Item No. 39:- Providing and constructing Brick Masonry Inspection chamber60x45 cmand 45 to 90 cm in depth including 1:4:8 cement concrete foundation,1:2:4cementconcrete channels, brick masonry, plastering from inside and outside as required in cement mortar 1:3 and airtight RCC lid with framefixed in cement concrete 1:2:4, curing, testing etc. complete. |
| 38 | Item No. 40:- Providing and Fixing mat finish stainless steel (of 302 grade ) railing with toppipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing, fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use) |
| 39 | Item No. 41:- Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9mm with lock plate of 3.15mm thickness reinforced with 35x35x5mm angle section fitted with sliding bolts and handles for both sides , deep M.S. channel section of depth and thickness not less than 65mm and 3.15mm respectively with hold fast arrangements, M.S. Bracket plate 300x300x3.15mm minimum size and shape with square bar, suspension shaft of minimum 32mm diameter, hood cover of M.S. sheet not less than 0.9mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S.62481979) (Without mechanical gear) |
| 40 | Item No.43:- Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. |
| 41 | Test Report |
| 42 | Test Report |
| 43 | Test Report |
| 44 | Test Report |
