Tender For Supply Of Spares For Esp System Of Unit#1 To 4, Ctpp, Chhabra For Fy. 2025-26, chhabra-Rajasthan

Supply Of Spares For Esp System Of Unit#1 To 4, Ctpp, Chhabra For Fy. 2025-26 , Inner Arm Assembly For Cerm & Eerm Consists I)Inner Arm Half-2 Nos. Ii)Hex Bolt M16x90-1 Nos.(Half Threaded, Grade 4.6) Iii) Hex Bolt M16x40-1 Nos.(Half Threaded, Grade 4.6) Iv) Hex Nuts M16-2 Nos.( Grade 4.6) (Moc En-08 For Flats ) As Per Drawing / Sample , Outer Arm For Cerm (Total Weight 8Kg+/-2.5-5%) I)Roller Wheel- 1 No. Ii) Arm-2 Nos.(10 Mm Thick Flat) Iii)Washer- 2 Nos.(45X28x3 Mm) Iv)Pin - 2 Nos.(L114xdia25mm Round Bar) As Per Drawing / Sample *Moc En-08 For Roller Wheel & Pin And Ms For Arms & Washers , Sleeve Bearing Bracket Assy. Consists I)Sleeve Bearing/Ci Liner (In Two Halves),C.I.Fg-210- 2Nos. Ii)Ht Hex Nut+ Bolt M12x50- 2Nos. Iii)Ms Strip (40X40x10)- 4 Nos. Iv)Weld Type-6 (Moc For Liner Set Is As Per Is-210 Fg-210) As Per Drawing / Sample , Set Ring (Material En-08) Id-50+/-0.5Mm , Od-75.0M, Height-18.00Mm Grub Screw,M10x15 Mm-2Nos. , Grip Coupling For Eerm (Moc En-08 For Flat) Consists Grub Screw M10x25 Mm -1 No. As Per Drawing / Sample , Shaft Sleeve 50 Ø Mm (En-24) Inner Dia -50+/- 0.5 Mm Outer Dia-70+/- 0.5 Mm Length- 130+/-1 Mm Thickness-10 Mm, , Shaft Sleeve 40.5 Ø Mm (En-24) Inner Dia -40+/- 0.5 Mm Outer Dia-50+/- 0.5 Mm Length- 120+/-1 Mm Thickness-5 Mm , Plain Bearing Assembly For Rapping Mechanism Consists I)Lower Half-01(Is-210-Fg 200) Ii) Upper Half -01 01(Is-210-Fg 200) Iii)Hex Bolt M16x120 Mm-02 Nos (4.6 Grade Half Threded) Iv)Hex Nut M16 -02 Nos.( 4.6 Grade) *Casting Must Be Free Of All Kinds Of Casting Defects. , Top Sleeve For Emmiting Shaft Dia.40 Mm (Material En-8) , End Shaft For Cerm Dia 50Mm Lenth : 790Mm Hole Dia 17Mm Material : En-8 As Per Drawing / Sample , Gd Screen Material As Per Is 513,Crca Sheet 2.5Mm (As Per Drawing),Material Of Hook Ms, 4.00Mm Thick , Emitting Rapping Shaft I , Emitting Rapping Shaft Ii , Emitting Rapping Shaft Iii , C.I. Liner In Two Halves (Moc As Per Is 210 Fg 210) , Shock Bar Guide Angle , U-Guide/Clamp For Collecting Electrodes, Material - Cold Rolled Ms Sheet Is 513, 2.50 Mm Thick Or As Per Drawing/Sample , Screen Tube For Emmitting Drives Of Esp, Material - Ms Sheet 5.00 Mm Thick Or As Per Drawing/Sample, Item Should Be Painted With Red Oxide Inner/Outer Side

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	03-07-2025	Date Extension-II	Date	16-07-2025
2	24-06-2025	Date Extension-I	Date	03-07-2025

INR 590 /-

INR 49400.0 /-

INR 24.70 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB