|
| 1 | M&L for non skid ceramic coloured joint less tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with over and including laying of 15 mm thick screed bed or bedding layer in CM 1:4 complete complete all as specified and directed. |
| 2 | Srl item No. 2 above but on verticalsurfaces such as skirting over andl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 3 | M&L for glazed ceramic coloured tiles of size 300 mm x 450 mm x 7mm /350 mm x 450 mm x 7mm /250 mm x 250 mm x 7mmthick as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with over and including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles complete all as specified and directed. |
| 4 | Virified Ceramic tiles 10 mm thick dark shade/ double charge/ ultra charge(square/ rectangular) polished, area of each tiles exceeding 0..42 sqm but not exceeding 1.00sqm, in floors etc. set and jointed in neat cement slurry and pointed inwhite or colour cement to match over and including 15 mm thick screed bed in CM 1:6complete all as specified and directed. |
| 5 | Srl item No 4 above but on verticalsurfaces such as skirting over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 6 | M&L for Granite slab of 16 to 18 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with and incl Demolition of stone slab and tileslaid bedded and pointed in anymortor of any description or thickness in floor complete all as specified and directed. |
| 7 | M&L for machine cut kota stone slabflooring 20-25mm thick laid & jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing & polishingover 20mm thick screed bed in CM 1:6 with and incl Demolition of stone slab and tileslaid bedded and pointed in anymortor of any description or thickness in floor complete all as specified and directed. |
| 8 | Taking downcement or cement lime plaster of any description including racking out joints, hacking for keys,scrubing down with water etc, complete all as specified and directed. |
| 9 | M&L for Rendering 15 mm thick on fair faces of concrete/brick surfaces in cement mortar 1:4mixed withwater proofing compound as per manufacturer\"s instruction, finished fair and even without using extracement complete all as specified and directed. Note :- WPC shall be measured and paid forseprately as \"supply only\" under respective item of sch A/ BOQ. |
| 10 | M&L for 15 mm thick rendering on other than fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and smooth (without using extracement)complete all as specified and directed. |
| 11 | M & L for 10 mm thick rendering on fair faces of brick work or concrete surfaces of ceiling in cement mortar 1:3 finished even and smooth (without using extracement) complete all as specified and directed. |
| 12 | Supply only Liquid water proofing compound ISI Marked (used 200 ml per bag of cement) complete all as specified and directed. |
| 13 | M&L for preparation of newly plastered surface and applying of Birla/JK white wall putty approx 1 mm thick in two layeras per manufacturer\"s instruction on newly prepared surfaceand make the surface smooth by rubbing with sand papers etcand applying two coat of oil emulsion distemper over a coat of primer complete all as specified and directed. complete all as specified and directed. |
| 14 | Prepration of new plaster surfaces of ceiling and applying three coat of white wash complete all as specified and directed. |
| 15 | M & L Preparation of old surfaces of ceiling, plastered on un plastered by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss & efflorescent salts, removing all vegetation growth and trading oil and greasy spots and applying one coat of white wash on old white washed surfaces ofceiling complete all as specified and directed. |
| 16 | M&L for Preparation of new plaster surfaces of wall and applying two coats of cement base paint etc complete all as specifed and directed. |
| 17 | Taking down chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 sqm each including removing to store complete all as specified and directed. |
| 18 | Taking down shutters of any descriptionexc 1 sqm & n. exc 2 sqmeach complete all as specified and directed. |
| 19 | Taking down shutterexc. 1 Sqm and n.exc 2 Sqm each and refixing the same opening after resecuring or easing and adjusting shutters of any description.complete all as specified and directed. |
| 20 | Taking down shutterexc.2 Sqm each and refixing the same opening after resecuring or easing and adjusting shutters of any description.complete all as specified and directed. |
| 21 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified. |
| 22 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beadsincluding punching or drilling out old glazing pins/spring clips including of fixing new one complete all as specified and directed. |
| 23 | S&F 4.00mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 24 | S & F 30mm thick 2nd class hardwood glazed andskeleton shutters divided into squares, with plain, chamfered or roun- ded,mitred and rebated sashbars, any numbers, open rebated and prepared to receive glass, gauze, etc. (without sash bars),edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified inSSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 25 | S&F 30mm thick flush shutters, solid coreconstruction, with partical board core and plywood face panels, commercial type on with both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed. |
| 26 | M&L 0.9mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer\"s instructions complete all as specified and directed. |
| 27 | S&F of solid PVC door frame os size 50mm X 47mm made out of 5mm thick single side prelaminated PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with the prelaminated sheet reinforced with MS square tube all as per drawing and complete all as specified and directed. |
| 28 | S&F factory made solid PVC moulded door shutter 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 5mm thick moulded PVC prelam sheet on front face and 5mm prelam coloured PVC sheet on back face, complete all as specified and directed. |
| 29 | Supply and fix galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of apertures 1.18 mm and fixed with tinned tacks or galvanized wire staple complete all as specified and directed. |
| 30 | Supply and fix in repairs galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of apertures 1.18 mm and fixed with tinned tacks or galvanized wire staple complete all as specified and directed. |
| 31 | Providing & fixing false ceiling at all heights with perforated 12mm thick micro tegular edged GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L- shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. |
| 32 | S & F 200 mm size Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 33 | S & Ffixed in repairs. 200 mm size Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 34 | S & F 150 mm size Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 35 | S & Ffixed in repairs. 150 mm size Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 36 | S & F 300 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed. |
| 37 | S & Ffixed in repairs 300 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed. |
| 38 | Supply & Fixing150 mm size Aluminium handles, cast type, anodised |
| 39 | S & Ffixed in repairs150 mm size Aluminium handles, cast type, anodised |
| 40 | Supply & Fixing125 mm size Aluminium handles, cast type, anodised |
| 41 | S & Ffixed in repairs125 mm size Aluminium handles, cast type, anodised |
| 42 | S&FButt hinges, medium weight cold rolled mild steel and fixed 100mm size. |
| 43 | S &F fixed in repairsButt hinges, medium weight cold rolled mild steel and fixed 100mm size. |
| 44 | S&FButt hinges, medium weight cold rolled mild steel and fixed 75mm size. |
| 45 | S&F fixed in repairsButt hinges, medium weight cold rolled mild steel and fixed 75mm size. |
| 46 | S&F 100mm hasp and staple,mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed in repairs with screws complete all as specified and directed. |
| 47 | M&L for Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 48 | S&F 18 to 20 mm thick solid PVC Board for cupboard/cabinet shutters with one side 1 mm thick printed PVC sheet other side plain PVC sheet of approved pattern as per specification and drawing and including necessary beading in matching colour, magnetic ball catcher, 1 brass 2 lever lock of 50 mm size complete all as specified and directed. |
| 49 | S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap (when open) 30 mm complete all as specified and directed. |
| 50 | M&L PVC SHEET wall paneling of thickness 5mm consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm thick prelam PVC sheet. The panel & strips shall be of 600 kg / cbm density manufactured by an ISO-9000 certified company. The strips should two PVC strips. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a U Channel at top, bottom and side edges andstrips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement complete all as specified and directed (Note- Including all nesscesary fittings and scafolding for heighted site) |
| 51 | S&F in repair Chromium plated brass wall mixer 3-in-1 system fancy type with provision for both hand shower and overhead shower complete with wall Flange (without Hand & over head Shower) screwed down for 15 mm bore GI pipe complete all as specified and directed. |
| 52 | S&F in repair Chromium plated brass central hole Basin Mixer without Popup Waste system complete screwed down for 15 mm bore GI pipe complete all as specified and directed. |
| 53 | S&F in repair 15mm bore stop valve, cast copper alloy screwed down high pressure with crutch or butterfly handle chromium plated fancy type long shank and cup(concealed type), screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 54 | S&F in repair 125 mm size chromium plated brass shower rose with swivel joints and swivel arms for fixing with 15 mm pipe complete all as specified and directed. |
| 55 | S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic actiontype with inlet ball valve and float, handle with & including bracket andPVC flush pipe 32 mm borecomplete all as specified and directed |
| 56 | S&F 600 mm long 20mm dia brass chromium plated tubular towel rails, complete all as specified and directed. |
| 57 | S & F in repairs 15 mm dia angle cock (two way) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe for fixing of health faucet and PVC connections etc. complete all as specified and directed. |
| 58 | S&F in repair bib cock long body with flange , fancy type,brass,chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule orGI socket complete all as specified and directed. |
| 59 | S&F in repairs 15mm size concussive push button taps of cast copper alloy, screwed for iron pipe and fixed complete all as specified and directed. |
| 60 | S & F in repairs pillar tap with capstan heads chronium palted screwed down high pressure with or withoutletter \"Hot\" or \"Cold\" with long screwed shanks and flynuts screwed for galvanised iron pipe and fixed complete for 15 mm bore complete all as specified and directed. |
| 61 | S&F in repair 600x450 mm size and 5.5mm thick looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround,mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws.complete all as specified and directed |
| 62 | Providing and fixing sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing as per sample approval complete all as specified and directed. |
| 63 | S&F in repair vitreous china wash hand basin (flat back) of size 550x400mmincluding one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector,MS brackets 2 numbers including cutting for and pinning in ends of brackets and including removing WHB outside MOD Land complete all as specified and directed. |
| 64 | S&F in repair white vitreous China wash down water closet pan (pedestal) pattern, and trap(excluding) fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. with and including plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and including removing WC outside MOD Land complete all as specified and directed. |
| 65 | S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet,integral foot rest (excluding flushing cistern and flush pipe) & including CI trap & connecting fitting as required set inplain cement concrete (1:3:6) type C-1and connecting to flusing cistern and trap & connecting fittings as required and making good to floor with and including removing WC outside MOD Land complete all as specified and directed. |
| 66 | Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.with and including removing urinaloutside MOD Land complete all as specified and directed. |
| 67 | S&F in repairs 110mm dia PVC (SWR) \"P’ trap complete all as specified and directed. |
| 68 | S&F in repairs 110mm dia PVC (SWR) \"S’ trap complete all as specified and directed. |
| 69 | S & F in repair waste coupling 32 mm dia of PTMT (half or full threaded) minium weight 45 gram complete all as specified and directed. |
| 70 | S&F in repair Waste coupling to WHB/ kitchen and laboratory sink of 32/40 mm diacomplete all as specified and directed. |
| 71 | S&F in repair 15mm size PVC connections internally threaded with PVC washer,PTMT nuts of length 450mm complete all as specified and directed. |
| 72 | S&F in repair PVC Waste pipe to WHB/ kitchen sink of 32 mm diacomplete all as specified and directed. |
| 73 | S&F in repair drapery fancy type curtain rod shall be 32 mm dia of aluminium pipe with powder coating with wooden finish including bracket rings, fancy knob , curtai ring 08 Nos minimumincluding all fixing arrangement complete all as specified and directed. |
| 74 | S&F in repairsinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with & including one waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement ,with PVC coupling, PVC waste pipe 40mm bore 750mm long complete all as specified and directed. Make as approved by GE. |
| 75 | S&F in repairs Stainless steel utencil plate rack size 600 mm x 600 mm x 250 mm ) using 0.8 mm thick sheet complete all as specified and directed. |
| 76 | S & F in repairs MS peg stay300 mm long enameled black for steel windows with hindged joints etc complete all as specified and directed. |
| 77 | S & F in repairs MS Handles cast type enameled black 125 mm long for steel windows with necessary fittings complete all as specified and directed. |
| 78 | Resecuring or easing and adjusting wooden shutters of any description exc. 1 Sqm but n.exc. 2 Sqm each without taking down complete all as specified and directed. |
| 79 | M&L for servicing/ easisng of steel windows of size not exceeding 2 Sqm each including cleaning, scrapping, hacking, oiling, necessary welding, replacing broken hinges, handles, stay etc and making good disturbed portion painting complete all as specified and directed. |
| 80 | Taking out steel water tubing and connections including cleaning for refixing 15 mm dia complete all as specified and directed. |
| 81 | Taking out steel water tubing and connections including cleaning for refixing 20 mm dia complete all as specified and directed. |
| 82 | M&L for 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete all as specified and directed. |
| 83 | M&L for 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete all as specified and directed. |
| 84 | Re-fixing old steel water tubing and connections in new or old position (walls, ceiling, floors etc) 15 mm dia complete all as specified and directed.(Note:Serviceable pipes & fiitings obtainedfrom item 82 to be re-used) |
| 85 | Re-fixing old steel water tubing and connections in new or old position (walls, ceiling, floors etc) 20 mm dia complete all as specified and directed.(Note:Serviceable pipes & fiitings obtainedfrom item 83 to be re-used) |
| 86 | S & F in repair PVC water tank cover for 500 ltrs / 1000 ltrs capacity PVC water tank complete all as specified and directed. |
| 87 | Disconnecting & taking down existing water tank of capacity exc 250 litres and not exc. 500 litres and removing from site complete S&F rotational moulded polyethylene water storage tanks 500 litres capacity (cylindrical verticalwith closed top) hoistedwith and including 25 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed in position all as per SSR Part Icomplete all as specified and directed. |
| 88 | Disconnecting & taking down existing water tank of capacity exc 250 litres and not exc. 500 litres and removing from site complete S&F rotational moulded polyethylene water storage tanks 1000 litres capacity (cylindrical verticalwith closed top) hoistedwith and including 25 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed in position all as per SSR Part Icomplete all as specified and directed. |
| 89 | S&F in repair fancy type chromium plated health faucatwith1.50 metre longPVC tube coverCP flexible with wall hook suitable for 15 mm bore iron pipes or for unions and fixed complete all as specified and directed. Make-Prayag or other equivalent makes as approved by GE. |
| 90 | S&F in repairs 150mm dia chromium plated towel ringfixed with and including Chromium plated brass screws and cleats (Minimum weight 140gms) complete all as specified and directed. |
| 91 | S&F in repairs plastic water closet seat cover , whiteor tinted, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 92 | S & F in repairs 20 mm dia gun metal gate valve with Iron wheel screwed both ends for Iron pipe complete all as specified and directed. |
| 93 | S&F in repairs 4 lever brass mortice lock, vertical type, size 100 mm complete all as specified and directed. |
| 94 | S&F brass spindles for taps/cocks any type any size complete to change and refixing of taps/cocks after replacement of spindles complete all as specified and directed. |
| 95 | S&F in repair 25 mm dia bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/2 0mm-210gms./25mm-455gms/ 40mm - 690 gms) complete all as specified and directed. |
| 96 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing with and including removing Debris out sideMOD Land at contractor is own arrangement complete all as specified and directed. |
| 97 | Dismantling of wall and ceiling boards any thickness including cover filletes with and including with and including removing Debris out sideMOD Land at contractor is own arrangement complete all as specified and directed. |
