Tender For Electrical Wiring With Allied Works For The Vertical Extension With Light Roof To Create Office Space At The 3Rd Floor Of Suda Building By Central Mechanical Division Under Udma Department. - 1 Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish. 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC 2 Average run 6 mtr 3 Average run 8 mtr 4 Average run 9 mtr 5 Distribution wiring in 1.1 KV single core stranded FR PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit FR/PVC casing capping, (Precision make) incl. necy. fittings as required 6 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC 7 2x56/0.3 (4.0 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC 8 4 x 84/0.3 (6 sqmm) + 2 x 56/0.3 (4 sqmm) ECC 9 Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C- Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. 10 Supply & Fixing 240 V, 3 nos. 16 A, 5 pin Modular type plug socket with 3 nos. 16A Modular type switch (Brand approved by EIC), 20A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 2 row 12 Module GI Modular type switch board with 2 row 12 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. 11 Supply & Fixing 240 V, 6 A, 5 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 3/4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. 12 Supply & Fixing 240 V, 16 A, 5 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 3/4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. 13 Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc. 14 Supply & Fixing 240 V,25 A, 3 pin Modular type plug topwithout indicator (Brand approved by EIC) & necy. Connections 15 Supplying & Fixing 2 module GI Modular switch board complete with top cover plate flush in wall in housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. box240 V,25 A, 3 pin Modular type plug topwithout indicator (Brand approved by EIC) & necy. Connections 16 Supplying and fixing PVC Rigid Conduit FR [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works. 17 20 mm size. 18 25 mm size 19 Supply & Fixing Telephone socket (RJ11) Modular type (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections & testing as required. 20 Supply & Fixing RJ45 sitable for CAT6 cable (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections & testing as required. 21 Supply installation & commissioing 24-Port Gigabit Swicher Make D-Link/TP-Link on frame including connection complete as per instruction of EIC. ) 22 Supplying & Drawing 2-pair Telephone cables with high density polyethylene insulated solid annealed high conductivity bare copper of dia 0.5mm in prelaid PVC rigid conduit/ in polythene pipe embeded in wall. 23 Supplying & Drawing LAN cable (CAT6) (Brand approved by EIC) in prelaid PVC rigid conduit/ in polythene pipe embeded in wall. 24 Supply and Installation of Cassette type room air conditioning machine of following tonnage capacity 3 star rating fitted with rotary crompresser and cooling capacity min. 6000 k cal/Hr., minimum discharge air flow 800cum mtr, 800EER ( W/W) 2.7-2.89. (Rates are inclusive of extra refrigerant pipe drain pipe connecting cable) up to the satisfaction of the EIC. 2 Ton (Make : Hitachi3 star non-inverter type. 25 Supply, installation, testing & commissioning of suction/ discharge copper pipe line in split air conditioning unit 1.0/1.5 TR/2 TR/3 TR capacity including brazing, nitrile rubber insulation 6/9mm thick class O, etc complete as required. 26 Copper tube 3/8 27 Copper tube 5/8 28 Providing & Fixing of ISI marked (IS : 15778 - 2007) Rigid CPVC drain water piping 6 kg/ cm2 with fittings like elbow, socket, Tee etc& support with MS hanger on ceiling or recessed in wall withchasing & plastering with 6 mm thick closed cell elastomeric nitrile rubber insulation complete in all respect. 20 mm dia. 29 Supply & fixing MS powder coated stand suitable for 1.0/1.5/ 2.0 Tr outdoor type of Split AC. All as per pre-approved by Engineer incharge. 30 Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. Up to 250A 8 way 31 Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection. 250A Legrand Make. 32 Supplying and fixing6-32A 240 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. L&T/ABB/Siemens. 33 Supplying and fixing 63A TP 415 V MCBon din rail of existing DBs and necessary connection. L&T/ABB/Siemens 34 Supplying and fixing 415 V 100A Four Pole MCCB of Breaking capacity 25kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connectionMake L&T/ABB PWD Page D-8 item no. 10 35 SupplyingandfixingdoubledoorHorizontalTPNMCB Distributionboardwith IP-42/43protection, concealed inwall after cutting the wall &mending good the damages tooriginal finish incl. Inter connectionwith suitablesizeofcopperwireandneutral link&provision for earthing attachment 36 4 way Enclosure (607715) Legrand make 37 6 way Enclosure (607716) Legrand make 38 Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. 4 POLE, 63 A. 39 Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board 40 Supplying of approved make 400mm sweep wall fan oscillating type with base, blades, guard, speed regulator etc. AC 230- 250 volts. 41 Supplying of approved make exhaust fan heavy duty with mounting frame, blades AC 230-250. 225 mm sweep RPM 900/1400 (9) 42 Supply and fixing of philips Soft Glow 36 watt Office compliant fully diffused recessed mounted 2X2 false ceiling based LED light including connection by 1.5 sq mm cu wire. 43 Supply and fixing of Green LED Ultima Square (6 x 6), including cutting the false ceiling in required dimensions also the wiring and connection of the light by 1.5 sq. mm. cu wire complete. . Make: Crompton 18 W square/round 44 Supply TMC501 Conventional industrial batten Philips LEDtube, model no : TMC 501 P 1xT-LED 22 W P3241. 45 Supply and fixing of Sky Cove LED Strip Light (5M length) with driver and necessary connection. Make: Havells, LED Strip Light (5M length) with driver. 46 Supply and fixing of Philips Style State Track, Track & Spot lights, Model No:- ST916T LED20/940 PSU 1C MB BK IN also the wiring and connection of the light by 1.5 sq. mm. cu wire complete. 47 Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :. 3.5 core 50 sq.mm. armored AL cable. 48 Finishing of the XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to switch, BDB and BBC etc. 3.5 core 50 sq.mm. armored AL cable. 49 GST@18% on total amount 50 CESS@1% on total amount
