Tender For Repair And Renovation And Supply, Installation, Testing & Commissioning Of Fire Detection System In Durgapur Sdh, Paschim Bardhaman. 1 Supply, Installation,Testing & Commisioning Of Microprocessor Based 2 Loopsfire Alarm Control Panel Fully , durgapur-West Bengal

Tender For Repair And Renovation And Supply, installation, testing & commissioning Of Fire Detection System In Durgapur Sdh, Paschim Bardhaman. - 1 Supply, Installation,Testing & Commisioning of Microprocessor based 2 Loopsfire alarm control panel fully networkable with each loop capable of taking 125 devices, 1/4 VGA display character alpha-numeric liquid crystal display.The panel shall be soft addressable type. The panel shall be able to give pin point location of all fire/fault conditions. Further, the panel must be able to automatically switch off respective control switches when ever any alarm is triggered The panel shall have in built rectifier, provision for external & internal printer (if required),Loop cards, LCD unit to indicate Fire/Fault Signal with address and analog output, complete in all respects, having 10000 event memory, integral SMF lead acid batteries with sealed cells of 24 V capable of running for a minimum of 2 hours with integral battery charger complete as required. ( Make: Siemens Cerberus Pro/ Securiton / Bosch) 2 Supply installation Testing & Commisioning of EN -54 standard VDS/LPCB ApprovedAddressable Multi sensor Detector (optical smoke as well as heat ) with inbulit / additional isolator and integral LED status indicator with 360 degree viewing angle Detector shall commumcate 3 danger levels for differentiated alarm activation and high tolerance to dust dirt temperature fluctuation and air currents Detector should have unquie address for communication and assigned through panel with Mounting Base as rqequired with the protection category of IP40 (Approved Make:Honeywell/Bosch / Seoutron/ Siemens) 3 Supply, Installation, Testing & Commissioning of Intelligent Addressable EN Standards & VDS Approved Heat (Fixed Temp + ROR Temp) Detector with Base & Necessary accessories for fitting, J.B etc. (Approved Make: Siemens Cerberus Pro/ Securiton / Bosch) 4 Supply, Installation, Testing & Commissioning of Intelligent Addressable EN Standards & VDS Approved Manual Call Point with Necessary accessories for fitting, J.B etc. (Approved Make: Siemens Cerberus Pro/ Securiton / Bosch) 5 Supply, Installation, Testing & Commissioning of EN Standards & VDS Approved Loop Powered Sounder cum Strobe with necessary accessories for fitting, J.B etc. (Approved Make: Siemens Cerberus Pro/ Securiton / Bosch) 6 Supply, Installation, Testing & Commissioning of Response Indicator. (Approved Make: Siemens Cerberus Pro/ Securiton / Bosch) 7 Supply & Laying of 1.1KV grade 2nos 1.5 sq.mm PVC insulated flexible FRLS copper Cable (Make. Finolex/Mescab/KEI)for Looping.in PVC (Approve Make)conduit including Supply & Fixing of 20 mmcomplete with all accessories. 8 Supply & Laying of HDPE pipeFor Overhead Cable Runway (Approve Make)conduit including Supply & Fixingcomplete with all accessories 9 Supply and installation of Conventional type smoke detector (make: Siemens) as per direction of EIC. For SNCU Building 10 Checking, Testing, Cleaning of the Smoke/Heat detectors ( approved Siemens make) devices thoroughly and refixing the same as per direction of EIC. 11 Supply,installation, Testing, Commissioning of Addressable Multi detector with all necessary acceessories (make:Siemens ) as per direction of EIC. 12 Finding disconnected device from loop cable,Auto learn and configure device,Change pmi,Upgrade pmi if needed,Configure system from Siemens software, Re-commisioning of necessary hardware and Software for Repeater fire alarm panel with necessary certificate from commisioning engineer for installedapproved siemens make as per direction of EIC. 13 Supply, installation, Testing and Commissioning of 12 Volt 7 Amp power BATTERY with all necessary accessories. (make: Approve, as per choice of EIC) 14 Add GST @18% On total from item no 1 to 13. 15 Add LWC @1% On total from item no 1 to 14.

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	24-06-2025	Date Corrigendum	Date	30-06-2025

Refer document

Refer document