Tender For D/O Village (Maintenance Of Barat Ghar In Village Illabans) Noida - Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) 2 Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, ….aggregate of 40 mm nominal 3 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 4 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 5 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer 6 Providing wall putty on new surface with approved quality material ofBerger / J.K / Birla or similar make 2 coats . 7 P/F glass panes with putty and glazing clips in steel doors ,windows, celestory windows,all complete with 5.5mm thick glass panes. 8 Painting with synthetic enamel …….: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. 9 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 10 Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) 11 Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar tapes, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requir .White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15mm C.P. brass pillar taps with elbow including operated levers 12 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 13 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 14 Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore 15 Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931 : 15 mm nominal bore, 16 Providing and fixing C.P. brass angle valve for basin mixer and gyser points ofapproved quality conforming to IS:8931 15 mm nominal bore 17 Brick work with common burnt clayF.P.S (Non modular) bricks of class designation150 infoundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand ) 18 Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, includingscrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in-charge (payment for providing grooves shall be made separately). 19 Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : 15 mm wide and 15 mm deep groove 20 Providing and fixing water closet squatting pan (Indian type W.C. pan with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern ..... 580x440mm with integral type foot rests.17.1.1 21 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) 22 Supply and fixing of garden bench of standard quality in cast iron frame with 11 Nos. rectangular MS pipe of 70X25 mm on seat and back of size 5 foot length and 2 foot 6 inches height and seat depth 15 to 18 inches Approximate with weight of 90 kg approx. embedded with hold fast in C.C block 6X6X9, duly painted & as per approved design i/c cartage, loading unloading etc. complete in all respect. 23 S/F Submersible Motor pump CRI Make. 5 HP 24 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.25 mm nominal outer dia Pipes 25 Submersible mortor Cable (make - Tridev Electricals/Uttam Engineering Works/Sweta Electricals)/ Hitech Submersible Cable moter capacity up to 15 HP (2 x (10sq. Mm x 4core) + 1x 1.5 sq. mm 4 core) 26 Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
