Tender For Special Repair To Tl Gp At Agra Under Ge (East) Agra; 1 Dismantling asbestos cement (corrugated, semicorrugated sheet including curve/ridge etc.) sheets in roofcoverings complete all as specified and directed. 2 S&F of pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of green colour (height of building upto 15m ) having tensile strength of 550 Mpa with grade of zinc coating 120 grams/ sqm as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. 3 S&F of pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of green colour (height of building upto 15m ) having tensile strength of 550 Mpa with grade of zinc coating 120 grams/ sqm as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. 4 S&F pre-painted, galvanised, pre-fabricated / pre-engineered pre- painted galvalume aluminum zinc GI based sheet 1.0 mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 including all fixing arrangement etc. complete all as specified and directed. 5 Dismantling of wrought iron of mild steel work of any description not otherwise poivided complete all as specified and directed. 6 S&F of Rooftrusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, wind tie,channel or flat sections) including distance pieces, welding, cutting , cleats etc Fe 410 -W (GdeE- 250) qualityA complete all as specified and directed. 7 M&L for preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zincchrome primer complete all as specified and directed. 8 M&L for preparation of old steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed 9 M&L for preparation of old surfaces of Brick / Concrete wall any description over 10cm girth or width, not otherwise described and applying a coat of synthetic enamel paint etc complete all as specified & directed. 10 Dismantling wall and ceiling board or insulation board /slabs/blanket any thickness including cover fillets complete all as specified and directed. 11 S&F powder coated of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs etc complete all as specified & directed. 12 M&L for 4 mm thick non asbestos fibre cement building board designer as in ceiling of size 600 x 600mm fixed to GI snap grid frame workcomplete all as specified & directed. 13 Taking down chowkats or frame with shutter (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed. 14 Taking down chowkats or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm and not exc 4.00 Sqm each complete all as specified and directed. 15 S&F Powder coated / anodized aluminium door & frame 0.55 Kg/m including 5.00mm thick tinted glass in half portion andin other half portion 12 mm thick prelaminated particle board, exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination complete and fixed with anodized aluminium snap beading, glazing clips, joining clips, screws and 02Nos of aluminium handle on each door shutter, aluminium anodized tpwer bolt 200 mm long 02 Nos on each shutter and mortice lock device complete with double keys for each lock, 01 No Floor spring for each shutter complete all as specified and directed with following specifications:- (a) Aluminium door frame = 101.50x44.45mm(b)Aluminium style/top & middle rails of shutter = 83.5x44.45mm(c) Aluminium bottom rail of shutter = 114.50x44.45mm(d) Aluminium door frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangements & making good of existing surface with obd/whitewash over plaster after fixing door etc complete all as specified and directed 16 Providing & fixing ofwindowsmade of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy-duty stain less steel pivot hinges shall be provided per shutter. The windows should be panelled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self-expanding, screws. Including 10mm square guard bars with 6” (152.4mm) pitchincluding making good of existing surface with obd/whitewash over plaster after fixing window etc complete for finished item of work including of all taxes etc as specified and directed. 17 Providing and Fixing ofventilator made of pre-painted steel (Base steel as per IS 513 of 0.58 mm thick “D” Quality galvanized as per IS 277 with Zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 48x50mm, centre mullion should be of 48x50mm, section for shutter should be of 52x 25mm and rebate for Glazed shutter with a 20mm provision for Guard bars/Grills. The sections are to be cut to length metre joined with corner bracket. Centre mullion is to be fixed with mullion cap. Handle, stay, 2 nos. of Stainless Steel heavy duty Pivot hinges shall be provided per shutter the windows fitted with 4mm thick frosted glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including fixed panel beading section should be of 12x12mm. Outer frame and mullions to have 10 mm Square guard bars with 6” (152.4mm) pitch etc., complete for finished item of work. 18 S&F of factory made soild PVC door frame of size 50mmx47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube , supplying & fixing in opening as per specification and drawing complete all as specified & directed.. 19 S & F factory made Solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick moulded PVC Sheet on the front face & 2 mm plain colour PVC sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. 20 S&F 150 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified & directed. 21 S&F 100 mm long stainless steel hinges type B-12 and fixed with screw/ welding complete all as specified and directed. 22 M&L 150 mm long aluminium anodized handle cast type complete all as specified and directed. 23 Hacking out old broken glass (any thickness, size quality or description) from wooden or metal frames, glazed with putty or fixed with beads etc complete all as specified & as directed. 24 S&F rough cast wired Figured glass 6.4 mm thick and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed. 25 S&F in repair powder coated partition of specified aluminium section as per required size & weight of section can not be less than 0.55 Kg / RM including aluminium beads, rubber gasket and 5 mm thick plain glass in upper portion and 8 mm thick ACP sheet of any colour etc complete all as specified and directed. 26 S&F in repair steel rolling shutters 1.25 mm lath thickness with ball bearing,as specified including top cover, anchoring rod, hasp and staple,rail andgear operated type with bevel gear box and crank handle to make it fully functionable etc complete all as specified and directed. 27 Taking down rolling shutters and re-fixing to its original position after cleaning all parts, straightening rails, changing damaged strips, bottom rail,guide rail, helical spring as required, greasing, oiling, painting, welding servicing for smooth functioning of all parts completed all as directed for Area of rolling shutter n.exc 10 sqm each size complete all as specified and directed.Note: Lath strips, bottom rail, spring, gears, guide rail etc. will be measured and paid separately as supply only. 28 Taking down rolling shutters and re-fixing to its original position after cleaning all parts, straightening rails, changing damaged strips, bottom rail,guide rail, helical spring as required, greasing, oiling, painting, welding servicing for smooth functioning of all parts completed all as directed for Area of rolling shutter exc 10 Sqm and n.exc 25 Sqm each size complete all as specified and directed.Note: Lath strips, bottom rail, spring, gears, guide rail etc. will be measured and paid separately as supply only. 29 Supply only mild steel spring made out of6 mm to 11mm dia high tension steel wire confirming to IS 4454 having 65 to 100 helical for rolling shutter for smooth working condition complete all as specified and directed (dia of spring 100mm to 150mm) 30 Replacement of existing unserviceable gear box with new gear box made out of 1mm thick mild steel sheet including painting with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. 31 Supply only65 to 75 mm wide guide rail, 3 mm thick suitable for rolling shutter complete all as directed 32 Supply only 75mm wide laths strips 1mm thick for rolling shutter including mild steel clips at either ends duly painted with and including two coats of synthetic enamel paint (shades to match with the existing) over a shop coat of red oxide primer complete all as specified and directed. 33 Supply only mild steel bottom rail lock plate with two handles 150 mm wide and 3mm thick including necessary locking arrangement on both sides and painting to bottom rail with and including two coats of synthetic enamel paint to match with existing over a shop coat of red oxide primer complete all as specified & directed. 34 S & F in repair of 1 mm thick top cover galvanized iron sheet for steel rolling shutters complete all as specified and directed. 35 Taking down cement or cement lime plaster of any discription on bricks or stone walls/ceiling etc including racking out joints, hacking for kay, scrubbing down with water complete all as specified and directed. 36 M&L for 15 mm thick plastering in CM 1:6 on brick surfaces of walls & finishing the surface even & smooth complete all as specified and directed. 37 M&L for 15 mm thick plastering in CM 1:4on brick surfaces of walls & finishing the surface even & smooth complete all as specified and directed. 38 M&L for two coats of oil bound distemper over a coat of average 2 mm thick puttyon new plastered surfaces including preparation complete all as specified and directed. 39 M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed. 40 M&L for preparation of new plastred surfaces of wall and applying two coat of silicon additive paint@ 1 ltr/ XSqmin each coat over and including one coat of silane siloxane primer @ 0.12 Kg/sqm over and including one coat of exterior primer @ 0.90 Ltr/X Sqm compete all as specified and directed. Note : Total qty of paint and Silane Siloxane Primer will be brought at site / storeyard in a one go by the contractor. 41 Demolition of brick work built in cement mortar including all quoins arches pillar etc complete all as specified and directed. 42 M&L for brick work with sub class B bricks old size straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. 43 M&L for preparing of old plastered or unplastered surfaces of walls by brooming down or by steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts and applying two coats of oil bound distamper over 2 mm thick putty complete all as specified and directed. 44 M&L for preparation of old plastered or unplastered surfaces of wall including cornices, pilaster etc by brooming down by steel wire brushing, scrapping down smoke Soot, moulds, moss and trading oil and greasy spots etc and apply two coatof white wash complete as specified and directed. 45 M&L for preparation of old plaseter surfaces including removal of existing treatment and applying silicon additive paint @ 1 ltr / X Sqm over and including one coat of siliane siloxane primer @ 0.12 kg / Sqm over and including one coat of exterior primer @ 0.90 Ltr / X sqm etc complete all as specified and directed.Note : Total qty of paint and Silane Siloxane Primer will be brought at site / storeyard in a one go by the contractor. 46 Dismantling stone slabs and tiles of any description or thickness in floors / dados, etc laid bedded and pointed in any mortar complete all as specified and directed by the Engineer-in-charge 47 M&L for machine cut kota stone slab flooring 20-25 mm thickover and including cement screed bed 20 mm thick in 1:6 cement and sand mortrar, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed 48 M&L for Kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over and incl 10 mm thickcement plaster 1:4 cement and sand mortrar all as specified and directed. 49 M&L for glazed Vitrified Ceramic tiles 10mm thick (square / rectangular) of any shade (as directed by Engineer- in- Charge) polished, area of each tilesexc 0.42 sqm but not exc 1 sqm infloors etc white cement and coloured pigment to match the tiles over and including 15 mm thick screed bed in CM 1:6complete all as specified and directed. 50 M&L for glazed Vitrified Ceramic tiles 10mm thick (square / rectangular) of any shade (as directed by Engineer- in- Charge) polished, area of each tilesexc 0.42 sqm but not exc 1 sqm inskirting etc white cement and coloured pigment to match the tiles over and including 10 mm thick rendering in CM 1:4complete all as specified and directed. 51 Demolition of concrete in any description and in any position (unreinforced) complete all as specified and directed. 52 M&L plain cementconcrete type B-0, 1:2:4 (12.50mm graded stone aggregate) 25mm thick as in sub floor, sub base, to receivetiles omplete all as specified and directed. 53 M&L for non skid ceramic coloured tiles (Premium quality) (squre/ rectangular) area of each tiles exc 0.11 sqm but n. exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed in CM 1:6 etc complete all as specified and directed. 54 M&L for glazed ceramic coloured tiles of size450x300x7mm thick fixed on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4complete all as specified and directed. 55 M & L for18-20 mm thick black granite oflength and width as required including fixing, necessary cutting and support of angle at both corner and middle filled with PCC 1:2:4 type B-0 (12.50 mm graded stone aggregate) or cement mortor 1:3 etc complete all as specified & directed. 56 Taking up or down 15 mm bore steel tubing including fittings and connections, including cleaning for Refixing or removal to store complete all as specified and directed. 57 S & F 20 mm outer dia of CPVC pipes SDR 11 including plain CPVC pipe SDP 11 fittngs and Brass socketon wall,floor and ceiling etc complete all as specified and directed. 58 S&F 20 mm outer dia of CPVC brass elbow fixing to CPVC pipes on any location and position etccomplete all as specified and directed. 59 S& F 20 mm outer dia of CPVC brass Teefixing to CPVC pipes on any location and position etccomplete all as specified and directed. 60 Taking up or down 20 mm bore steel tubing/ PPR pipe including fitting and connections, including cleaning for Refixing or removal to store complete all as specified and directed by the Engineer-in-charge. 61 S&F 20 mm bore Galvanized Steel tubes, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by the Engineer-in-charge. 62 S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PVC float valve and nipple complete all as specified in SSR Part I including dismantling of storage tank. 63 S&F in repairs 20 mm diaGun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified & directed. 64 S&F in repairs 5 mm thick bevelled edge mirror of selected quality glass of required size and shape with 50x20 mm teak woodpolished beading mounted on 6 mm thick commercial ply wood / ACP / PVCand fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified and directed. 65 S&F in repairs Vitreous China wash hand basin counter type white of size 550x440 mm including32 mm CP waste coupling andPVC waste pipe 80 mm long fixed overblack granite etc complete all as specified and directed. 66 S&Ffor 15 mm bore pillar taps long bodycast copper alloy fancy typewith capstan heads chromium plated scrwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for any type of pipe complete all as specified and directed . 67 S&F in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets & taking out of old unserviceable connections etc, connecting up new and making good disturbe portion complete all as specified and directed . 68 S & F in repairsPVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed . 69 S&F in repairs 15 mm bore CP stop cock/angle cock, cast copper alloy fancy type, screwed down high pressure, screwed for any type of pipe or for unions and fixed complete all as specified and directed . 70 Supply & fixing in repair CP tubular towel rail, 60 cm long, 20mm bore, chromium plated complete all as specified & directed. 71 S & F in repair CI floor trap, plain including jointing with solvent cement (Diameter of outlet 75mm), jointing to waste pipe and fixed in cement concrete 1:2: 4 type B1( using 20 mm graded stone aggregate) mixed with pedilite water proofing liquid @ 200ml in 50 kg cement, inlcuding taking out of old unserviceable connections etc, connecting up new and making good disturbe portion complete all as specified and directed by the Engineer-in-charge. 72 S&F in repairs vitreous China squatting pan (Orissa pattern), white, of size 580x440mm white, with CI P or S trap, integral foot rests including flush pipe, trap, lime concrete bedding inlcuding taking out of old lime concrete bedding, unserviceable connections etc connecting up new and making good disturbe portioncomplete all as specified and directed by the Engineer-in-charge. 73 S&F in repair vitreous china wash down water closed pan (Pedestal pattern) with CI P or S trap including connection to trap and cistern and flush pipe (excl flusingh cistern ) and seat cover including making good to disturbed surface of floor allfixed as in repair all as specified and directed. 74 S & F in repairs flushing health faucet for pedestal pattern WC incl .flexible pipe and brass chromium plated nuts and bolts and water pipe of size 1150 mm long between dia & fixed completed all as specified and directed. 75 S & Fflushing jet for pedestal pattern WC incl. flexible pipe and Brass Chromium Plated nuts and blotsandwater pipe of size 1150 mm long between dia & fixed complete all as specified and directed. 76 S&F in repairbib taps long bodycast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for any type of pipe or for brass ferrule orto GI socket or PPR pipe etc making good disturbed portion complete all as specified and directed. 77 Supply & fixing in repairs C.P. grating 100/125 mm dia with or without centre hole etc all as reqd at site complete all as directed. 78 S&F in repairs CP Soap dish 100 mm dia fixed with cp screws etc complete all as specified and directed by the Engineer-in-charge. 79 S&F in repairs Vitreous China Urinal, full stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mmlong brass screws pointing arounds urinal back in cement , fixing of nozzles for discharge for water flushing pipe andunion for discharge pipes and 32 mm dia rigid PVC pipe etc complete all as specified & directed. 80 Removing or dismantling of damage / cracked/ concrete /loose concrete / plaster of ceiling/ wall/ chajja/ facia to expose the sound and hard concrete using a suitable mechanical device or by hammer and chisels etccomplete all as specified & directed. 81 M & L for applying 25 mm thick ( average ) repair mortar ready to use single component polymer modified repair mortar for repair of RCC members likes beams, columns, chajja and facia/Ceiling, mortar having good compressive strength and shrinkage resistance etccomplete all as specified & directed. 82 M & L for applying bonding agent for bonding old to new concrete surface likes chajja/ beams/ celings/ columns/ faciaetcby high performance modified Styrene- Butadiene Rubber ( SBR ) base binder & applying ofbinder 10 ltr / sqm etccomplete all as specified & directed. 83 M&L for single component polymer modified mortarrepair mortar upto 40 mm thickness in double coat and max thickness of 50 mmfor repair of RCC members likes beams, columns, chajja and facia/Ceiling, mortar having good compressive strength and shrinkage resistance etccomplete all as specified & directed. 84 M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash to match the existing as required complete all as specified & directed. 85 M&L for cleaning of water chamber of any size and depth for disposal of rain water, including properly cleaning off rubbish leaves and other foreign materials laying insideit and making it fully functionable including removing and refixing of covercomplete all as specified & directed. 86 S&F in repair for Mild steel plates, plain or chequered, 5 mm thick or over in thickness in available size Fe-290 etc complete all as specified & directed 87 Taking down Rain water pipe of any size or pattern ( CI / PVC / AC pipe ) including all fittings etc complete all as specified & directed. 88 S&F100 mm bore cast iron soil, waste vent sand cast pipes in any length with or without ears, with cement joints fixed to walls including making good disturbe portion to match the existing complete all as specified & directed. 89 S&F 100 mm bore cast iron soil, waste vent sand cast pipes in any length with or without ears, with cement joints laid in floor or in trenches including making good disturbe portion to match the existing complete all as specified & directed. 90 S&F 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access doors and cement joint including making good disturbe portion to match the existing complete all as specified & directed. 91 S&F 100 mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors and cement joint including making good disturbe portion to match the existing complete all as specified & directed. 92 S&F75 mm bore cast iron soil, waste vent sand cast pipes in any length with or without ears, with cement joints fixed to walls including making good disturbe portion to match the existing complete all as specified & directed. 93 S&F75 mm bore cast iron soil, waste vent sand cast pipes in any length with or without ears, with cement joints laid in floors or in trenches including making good disturbe portion to match the existing complete all as specified & directed. 94 S&F 75 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access doors and jointed with cement joint including making good disturbe portion to match the existingcomplete all as specified & directed. 95 S&F75 mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors and cement joint including making good disturbe portion to match the existing complete all as specified & directed. 96 S&Fclamps of size 50 mm x 5 mm thick flat iron fixed with suitable bolt / screws securing ends of stays to wall or roof for PVC (SWR) / CI Pipe for 100 mm bore pipe complete all as specified & directed. 97 S&F clamps of size 50 mm x 5 mm thickflat iron fixed with suitable bolt / screws securing ends of stays to wall or roof for PVC (SWR) / CI Pipe for 75 mm bore pipe complete all as specified & directed. 98 M&L for PCC 1:2:4 Type B1 ( using 20 mm graded stone aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in eight, copings, kneelers, apex stones bed plates, kerbs chajjas , water troughs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating, fixing of chain link fencing etcall as directed incl necessary formwork etc complete all as specified and directed. 99 S&F in repair UPVC single socketed 200 mm bore pipe, incl bend,shose, Tee, Y as required, etc in any length with rubber ring joints fixed to walls & valley gutter with MS clamp all as specified and directed. 100 M&L 75 mm thick PCC (1:3:6) type C2 using 40 mm graded stone agg as in plinth protection / Path / hard standing/ pavingsurface even and smooth without using extra cement and and exposed edges fair or rounding or chamfering laid in panels with and including all necessary form work and filling the joints with mastic filling of one part of hot bitumen 85/25 grade and three part of fine sand (all by weight) complete all as specified and directed. 101 Dismantling/ demolition ofpolymeric water proofing membrane including plaster, brick coba etc on roofs complete including removal of materialand debris away from the site etc complete all as specified and directed. 102 M&L for PCC 1:2:4 type B-1using 20 mm graded stone aggregate as in roof kerbs, paddings, mud stops slightly chamfered or rounded in edges including required grove cutting and including water proofing compound@ 2% by weight of cement complete all as specified and directed. 103 M&L for applying 10 mm thick plaster in CM 1:4 including water proofing compound@ 200 ML each 50 kg by weight of cement finished even and smooth complete all as specified and directed.(water proofing compound shall be paid/measured seperatly. ) 104 Supply only integral water proofing compound liquid admixture for mortar complete all as specified and directed. 105 M & L for 3mm thick wall care putty on wall surfaces etc all as specified & directed 106 M & L preparation of newly plasterd surface of roof incl cleaning the surfaces by using wire brush / pressure hose and applying high performance polythelene liquid membrane water proofing coating cold applied in two coats @ 1.5 kg/sqm two coats spray /brush applied with an elongnation of 300 % to 700 % and tensile strength of not less than 3 N/sqm as per ASTM D2370, crack bridging ability of 3.5 mm as per ASTM C1305, shore a hardness of not less than 60 as per ASTM D 2240. the item incl applying epoxy primer @ 0.15 Kg/Sqm and geotextile of 40 GSM to be applied over first coat while first coat is still wet complete as per manufactures instruction complete all as specified and directed by Engr-In-Charge.(Note:- 1. The contractor shall submit a guarantee of 10 years from date of completion of work for waterproofing treatment alongwith manufacturers guarantee. the amount 40 (forty only) per Sqmfor waterproofing treatment shall be withheld from contractor final bill till the expiry of guarantee period the contractor at his own option may furnish fix deposit receipt pledged in favour of GE (E ) Agra against guarantee money. 2.The name of applicator shall be got approved from GE before commencement of work. 107 Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, fan regulators, sockets, lamp holders, bell push, call bell, LED bulbs, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete and all as specified and removingfrom site. 108 M&L for concealed point wiring completeforOne light/Fan/Exhaust Fan/Bell point controlled by one switch with PVC insulated and unsheathed FRLSH cable 1.5 Sqmm(nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 20 mm dia PVC conduit medium grade concealed in wall and heavy duty PVC conduit not less than 20 mm in roof / floor slab and ceiling, pressed GI concealed terminal boxes not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of required colour complete, including 1.5 Sqmm PVC, FRLSH cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed.Note :- In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost 109 Description all as per srl item No-108 here in above but for one 3 pin 6A socket outlet independent controlled by one switch complete all as specified and directed. 110 Description all as per srl item No-108 here in above but for one 6A socket outlet on the same board controlled by one switch complete all as specified and directed. 111 Allas per srl item No-108 above but with 4 sqmm multi stranded copper conductor 1100 volts grade FRLSH PVC insulated unsheathed cable with FRLSH PVC 4 Sqmm multi standard insulated unsheathed copper wire for continues earth on independent boardcomplete all as specified and directed. 112 Allas per srl item No-108 above but with 2.5 sqmm multi stranded copper conductor 1100 volts grade FRLSH PVC insulated unsheathed cable with FRLSH PVC 2.5 Sqmm multi standard insulated unsheathed copper wire for continues earth on independent boardcomplete all as specified and directed. 113 Supply and fix switch piano flush button single pole one way 5 amps 240 volts with polycarbonate body complete all as specified and directed. 114 Supply and fix Switch piano flush button single pole one way 15 amps 230 Voltswith polycarbonate body complete all as specified and directed. 115 Supply and fixsocket 5 amps 3 pin flush type, 240 volts with polycarbonate body complete all as specified and directed. 116 Supply and fixsocket out let, 6 pin 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts with polycarbonate body complete all as specified and directed. 117 Supply and fixceiling rose , PVC/polycarbonate, insulated body surface bakelite 65mm dia three terminals complete all as specified and directed. 118 Supply and fixing LED luminaire 595 mm x 595 mm, 40 watt, 220 V AC, 6500 K recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver and connecting the same to electric source with & using PVC sheathed and insulated three core copper conductor cable of size 0.75 Sqmm and fixing arrangements for fixing the light fitting completeall as specified and directed. 119 Supply and fixing LED light fittingwith high out put diffuser 4 feet, 20 watt 220 V AC, LUMEN < 2000 with lumen efficacy 120 lumen/watt, basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. 120 Supply and fixing LED building security light fitting 35 Watt 230 V AC out-door type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection,fixed to pole or wall of building with and including suitableBracket made out of25 mm dia GIlightgrade pipe, 1.00 m long bent to shape by cutting & weldingas required & directed and fixed withtwo Nos of FI clamps 35x6 mm to be tightened with suitable size of bolts, nut and washers and including painted withtwo coat of aluminium paint over a coat of red oxide primer, and including connecting the fittingto electric sourcewith & including twin twisted copper flexible wire of size 0.75 sqmm three core with suitable size flexible PVC conduitincluding all accessories and fixing arrangements for fixing the light fitting and writing the date of fixing on security light with permt marker complete all as specified and directed. 121 Supply and fixing LED High Bay light fitting 150 watts with necessory hanging arrangement including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. 122 Supply and fix exhaust fan, steel body AC single Phase. 230V, heavy duty (copper winding)of size 450m sweep with, blades, and frame and louvers incl make in good to the disturbed surface MS bolts, grouted to wall and connecting up including provision in cable from connector to fan with flexible cable 24/0.2mm with copper conductor and necessary fitting arrangements complete all as specified and directed. 123 S&F sheet metal enclosure with socket plug top and MCB single pole and neutralwith two pin and earth plug top with one SP MCB 20 Amp 240 voltincl cutting/ chasing of wall and make in good to the disturbed surface complete all as specified and as directed. 124 Supply & fix of sheet metal enclosure Vertical TPN DB 4 Way double door, Suitable for Flush Mounting and Surface Mounting, with 250 A Copper Busbar for each phase with 2 Neutral bar, 2 Earthbar and Cable ties for Cable management, fully insulated busbar & shrouded Neutral bars, Improved Pan assembly for ease of installation, Prefitted masking sheet, Reversible Door for IP 43 DBs, With provision for 160 Amp MCCB as incomer and SP/TP MCBs as outgoingincl cutting/chasing of wall and make in good to the disturbed surface complete all as specified and as directed. 125 Supply & fix sheet metal enclosure MCB distribution board. TPN 415volts 6 way with IP-43 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB & taking down and making good distributed wall surfaces to match with existing specification all as specified and directed. 126 Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 12 way with IP-43 protection double door complete with appropriate size bus bar and neutral linkincl cutting/chasing of wall and make in good to the disturbed surface complete all as specified and as directed. 127 Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 8 way with IP-43 protection double door complete with appropriate size bus bar and neutral link incl cutting/chasing of wall and make in good to the disturbed surface complete all as specified and as directed. 128 Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 4 way with IP-43 protection double door complete with appropriate size bus bar and neutral linkincl cutting/chasing of wall and make in good to the disturbed surface complete all as specified and as directed. 129 Supply and fixing in repair one way sheet metal enclosure suitable for MCCB, 4 pole, 160-200 Amps, As per IEC 61439-3 complete all as specified anddirected. 130 Supply and fixing MCCB 4 pole, 200 Amps, 50 Hz, Icu=35 KA at 415 volts with thermal magneticalongwith adjustable magnetic protection for current setting Icu=Ics = 100% with adjustable over load setting (minimum 70% to 100%) value from 10 to 15 times of related capacity standard complete all as specified anddirected. 131 Supply and fixing MCCB 4 pole, 160 Amps, 50 Hz, Icu=35 KA at 415 volts with thermal magneticalongwith adjustable magnetic protection for current setting Icu=Ics = 100% with adjustable over load setting (minimum 70% to 100%) value from 10 to 15 times of related capacity standard complete all as specified anddirected. 132 Supply and fixing MCB SP 5 to 32 Amp rating 240V, 10KA C curve and current carrying capacity in the MCB DB complete with connection testing and commissioning.Complete all as specified and directed. 133 Supply and fixing MCB SPN 40 to 63 Amp rating 240V, 10KA C curve and current carrying capacity in the MCB DB complete with connection testing and commissioning. Complete all as specified and directed. 134 Supply and fixing MCB TPN 100 Amps,415V 10KA C curve and current carrying capacity in the DB complete with connection testing and commissioning. complete all as specified anddirected. 135 M&L for Submain wiring with two single core 1.5 Sqmm copper con-ductor, FRLS-H insulated, multistranded, unsheathed cable ISI marked drawn in con-duit concealed in wallsurface / ceiling for sub main connec-tion including one run of1.5 Sqmm FRLS-H insulated mul-tistranded unsheathed copper conductor used as earth wire to common earth and connection to earth dolly complete all as specified. Note: (i) The work should be executed at the top of appx 25m height of building. (ii) Two run of single core PVC cable with one run ofearth conductor and one run conduit /batten shall be measured as one unit.) 136 M&L for Submain wiring with two single core 4 Sqmm copper con-ductor, FRLS-H insulated, multistranded, unsheathed cable ISI marked drawn in con-duit concealed in wallsurface / ceiling for sub main connec-tion including one run of 4 Sqmm FRLS-H insulated mul-tistranded unsheathed copper conductor used as earth wire to common earth and connection to earth dolly complete all as specified. Note: Two run of single core PVC cable with one run ofearth conductor and one run conduit /batten shall be measured as one unit.) 137 M&L for Submain wiring with two single core 6 Sqmm copper con-ductor, FRLS-H insulated, multistranded, unsheathed cable ISI marked drawn in con-duit concealed in wallsurface / ceiling for sub main connec-tion including one run of 6 Sqmm FRLS-H insulated mul-tistranded unsheathed copper conductor used as earth wire to common earth and connection to earth dolly complete all as specified. Note: Two run of single core PVC cable with one run ofearth conductor and one run conduit /batten shall be measured as one unit.) 138 M&L for Submain wiring with four single core 10 Sqmm copper con-ductor, FRLS-H insulated, multistranded, unsheathed cable ISI marked drawn in con-duit concealed in wallsurface / ceiling for sub main connec-tion including two run of 10 Sqmm FRLS-H insulated mul-tistranded unsheathed copper conductor used as earth wire to common earth and connection to earth dolly complete all as specified. Note: Four run of single core PVC cable with two run ofearth conductor and one run conduit /batten shall be measured as one unit.) 139 Supply & fix Air Circulator fans 230 volts single phase oscillating 600 mm sweep, Min 1440 RPM, suitable for wall mounting complete all as specified and directed. 140 S & F Wall mounting fan, electric driven single phase 230 volts, oscillating type, 400 mm sweep, high quality ABS base with high speed motor and balanced blades with three leafed and 3 core copper cable of suitable size complete all as per specified. 141 Supply, fixing, connecting & testingBLDC Ceiling fans operated with remote control complete with blades, down rods of 3m length, Remote control and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), and including connecting wire with new 3 core 0.50 Sqmm PVC insulated and sheathed copper conductor cable from ceiling rose and also writing MES No with black paintcomplete all as specified and directed. 142 M & Lfor test point terminal block made of gun metal or phosphoras bronze of size 75 x 75x 25 mm drilled and screwedincluding 3 Nos 8 mm dia 25 mm long not exc height head screw complete all as specified and directed. 143 S & F aluminium strip 25 x 3.15 mm with saddles and fixing screw etc for roof and down conductors and above ground complete all as specified and directed. 144 M & Lfor pre-cast cement concrete block masonary with solid blocks 1:2:4 type B-1(using 20 mm graded aggregate) exc 30 cm in width and setting in cement mortar 1:4 complete for fixing GI pipe for air termination rods complete all as specified and directed. 145 S & F GI tube medium grade 40 mm dia fix to wall and ceiling complete all as specified and directed. 146 S & F porcelain insulator of required size not exceeding 10 cm long with two Nos hole each on both end for fixing properly with nuts and bolts on wall of building for separated to lightening conductor or eathing strip from building all as required at site complete all as specified and directed. Note : The distance between two insulators fixed on wall shall not be more than 1 m length. 147 Supply and fix air terminal single pointed aluminium rod 12 mm dia and 300 mm long complete all as specified and directed. 148 M&L for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized steel wire 4mm dia as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanizediron or steelwith connected to test point and testing on completion including 15mm GI light grade pipe for earth leadprotection from earth point to earth plate, including provnadequate quantity of charcoal dust mixed with35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth platewith 20mm bore medium grade GI Pipe for watering, GI check nut, funnel and wire meshwith and includingall necessary excavation& earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre, PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed.NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor. 149 Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and directed.
