Tender For Emergent And Day To Day Maintenance Works Of Super Speciality And Cardiology Building, Udaipur - 1 Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meter lead:For thickness of tiles 10mm to 25mm 2 Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. 3 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge.1: 3: 6 or richer mix. 4 Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead: Of area 3 square meter and below. 5 Removing aluminium/Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. 6 Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand) 7 Half brick masonry in Superstructure , above plinth level upto floor Vlevelusing bricks of designation 75Cement mortar 1 : 6 (1 cement : 6 coarse sand) 8 Plaster on new surface on walls in cement sand mortar 1:6 including rackingofjointsetc. complete fine finish :20 mm thick. 9 6 mm thick cement plaster to ceiling of mix1:3 (1cement : 3-fine sand) 10 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) 11 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M20 grade Nominal Mix1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20mm nominal size). 12 Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basicitem.)With glass panes of 4.0 mm thickness ( weight not less than 10.0 kg/sqm) as per IS : 2835. With glass panes of 4.0 mm thickness ( weight not less than 10.0 kg/sqm) as per IS : 2835. 13 Renewing glass panes,with putty and nails wherever necessary Float glass panes of thickness 4 mm 14 S&f fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the aluminium window by Aluminium beading 20x3mm with suitable screws not exceeding 150mm distance at all heights with all lead and lift with scafolding. 15 Providing and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminum window/vent with required screws, Y and H aluminium section (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge.Polyester Powder coating aluminum( minimum thickness of powder coating 50 micron) 16 Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board Grade I, Type II conforming to IS : 12823 bonded formaldehyde synthetic resin ,of approved brand and manufacture in paneling fixed in aluminium doors ,windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge.Prelaminated particle board with decorative lamination on both sides. 17 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester mattconsisting of a coat of bitumen primer for bitumen membran @ 0.40 Itr/sq.mt. by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ltr and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got done through the authorized applicator of the manufacturer of membrane.3 mm thick 18 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesinin glue both sides with approved steel fittings complete as per annexure A:35 mm thick .Commercial Veneer both side 19 Extra for providing external lipping with 2ndclass teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 8.13. 20 Supply and installation of Multi Rib Proofing/cladding Sheet Manufacture out of0.50mm TCT (Total Coated Thickness) high tensile Zinc aluminum alloy coated galvalume steel (as per 150gsm zinc aluminum coated 550Mpa tuekd strength) confirming to IS: 1397/astm A-792 sheet to have wide pens 30mm high NB at 250 centre and centre width of 1020mm sheets be casted with regular modified polyster system on a continuous with line on centre for face and with a polyster coating respectively sheet shall have proportionality with siphoned plate made to prevent leakage sheet shall be fixed by more of sell drilling lift tapping hot dip zinc coated hox head fasterner of size 12x14x55mm long. The sheet shall be supplied in cost one length and for a minimum up to 12mts with all scaffolding. 21 Repairofdoor,windowshuttersincludingcostofmaterialandlabourforchangeofdamaged : 22 Style / rail of teak wood 30mm thick/ Aluminium Section 6 wide 23 Panel by Shuttering Ply - 9mm thick (Commercial) 24 Aldrop of mild Steel 12 long x12mm dia 25 Aldrop of mild Steel 8 long x10mm dia 26 Mild Steel Tower Bolt 6 long 27 Steel hinges - For Wooden Chowkhat 4 size 28 Steel Handle 6 size 29 Repair of existing steel glazed doors, windows and ventilator, MS sheet door, garge doors, compound wall gates etc. by welding drilling complete include. Cost of welding rods and hire charge of welding meachine and TP etc complete 30 Labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc. 31 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect.New Work 32 Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : new work 33 Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete. 34 Providing and fixingaluminum workfor doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285,fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and thedirections of Engineer- in – charge .(Glazing and paneling to be paid for separately). For fixed portionPolyester Powder coating aluminum( minimum thickness of powder coating 50 micron) 35 Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirmingto IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). 36 Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). ExtraforusingMarbleprinted/Graniteshadeordarkshadetilesinsteadofwhite,grey,ivory,fumeredbrown,lightgreen,lightblueandotherlightshadesinglazedtilesandMATfinishedtiles. Extraforusingsize above 200x300mm in glazed tiles and for using 400mm x 400mm MAT finishedtiles in place of 300mm x 300mm size. 37 Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.Jalore (P-white / S-white/ Rosy Pink colour) Up to 1500 Cm2 Tiles 38 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2coarse sand : 4 stone aggregate 10mm and down gauge) includingfinishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design 39 Repair to damaged RCC slabs, beams and columns etc for strengthening with cement mortar 1 : 2 in following steps :- 40 Choping losse and cracked concrete to required depth, cleaning the exposed surface of steel and concrete with wire brush and sand papering , cleaning of concrete surface with water as necessary and getting dried. 41 Applying Epoxy primer on the exposed steel bars. 42 Applying Epoxy hardener and resin mix (as per manufectureds specification) on concrete and steel bars with brush. 43 Speading dry cement mortar 1 : 2 mix over epoxy treated wet surface and allow it to dry for one day. 44 Plastering the surface with cement sand mortar 1 : 3 upto depth of 30mm complete. 45 Cure the plastered surface for 15 days, All work including scaffolding etc. complete in all respect. 46 Providing and fixing double scaffolding system on the exterior side, upto five story made with 4 wooden member 1.5 m c/c horizontal and vertical direction joining with rassi, clamps, challies. The scaffolding system shall be stiffened with bracing, runner, connection of building if necessary with all essential safty features for the workmen etc complete as per direction of EI.The lavation area of the scaffolding shall be measured for payment. The payment will be made once irrespective of duration of scaffolding.Note : This item to be used for maintence work judicially 47 Kota stone slab flooring 25 mm thick over 20 mm (average) thickbase laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completewith base of cement mortar 1 : 4 (1 cement : 4 coarse sand)For area of each slab from 2001 to 5000 Sq.Cm 48 Construction of Open SurfaceDrain with 112mm thick brick masonry in CM 1:4,110mm thick base concrete 1:5:10, 37mm thick M-15 grade C.C. flooring ,12mm 1:4 cement plaster on all exposed faces of walls including top surface excavation & disposal of earth complete as per approved design/drawing:250mm drain,300mm Av. depth 49 Carriage of Following Material including loading unloading and stacking if require complete in all repsect.Earth Sand,Lime Morrum Manure or Sludge building rubbish stone metal(Grit & Ballast) Stone for masonary work & Soling and excavated rock etc. For lead 10 Kms 50 P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 530x410mm. 51 P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor 52 P & F water closet Seat Covers with brass hinges complete :Solid PVC (IS 2548 marked) grade-I White for EWC. 53 P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball (IS: 1703 mark) complete including cutting and making good the wall:PVC with PVCbend as per IS : 7231 . 54 Providing & fixing concealed cistern with floor mounting frame and flush plate of superior quality and approved sample by Engineer-in-charge. 55 P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. 56 P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete.Flat Back (large) or half stall size 610x400x80mm. 57 P&F Marble Urinal Partition slab both sides polished of approved design cut from marble size 900x600mm.Makrana II quality marble having light spots 58 P & F C.P. brass Urinal Spreader for stall urinal of approved make. 59 P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall :Size 550 mm x 400 mm 60 P&FFlushCock / FlushValve (IS :9758Mark)forWCofapproved quality make :CP brass push type Half-turn exposed 25mm nominal bore. 61 P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: 62 C.P. Brass bib cock,15mm nominal bore. 63 (-do-) Long body, 15mm nominal bore weight not less than 690 gm 64 Synthetic Material(PTMT) bib cock of approved quality/ make, nominal bore,15mm, 86 mm long. 65 P & F Pilllar Cocks (IS :8931 : 1993 Mark) of superior quality and approved make: 66 C.P. Pillar cock, 15 mm dia nominal bore 67 C.P. Pillar cock, Swan-neck with casted spout, 15mm nominal bore. 68 Synthetic Material (PTMT) Pillar cock of approvedquality / make15mmnominal bore. 69 P & F Stop Cock(IS :8931 Mark),superior quality & ofapproved make:C.P. Brass 15mm nominal bore. 70 P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked) 71 P & F 15 mm. Dia Connection Pipe of approved quality/make :PVC pipe withC.P. Brass nuts upto length, 600mm 72 P& F waste Pipe with all fittingP.V.C with C.Pnut 32 mm 73 P & F Grating of approved quality/make:C.P. brass with frame (Heavy) & superior quality size 125mm dia. 74 P & F C.P. brass Doom Waste Coupling 32 mm dia. 75 P& F waste Coulping with fittings of approved quality /make: C.P Brass 32 mm dia 76 P & F Ball Cock (IS :1703 Mark) with Rod& P.V.C. Ball complete : Brass wt.Not less than 800 gm, 32mm. 77 P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : 78 Gun-metal 25mm nominal bore. 79 Gun-metal 50 mm nominal bore. 80 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1 metre spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall) 81 20mm nominal size 82 25 mm nominal size 83 P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc. 84 25mm dia nominal bore B Class 85 50mm dia nominal boreB Class 86 Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size : 87 25mm dia nominal bore 88 40mm dia nominal bore 89 50mm dia nominal bore 90 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge.(External work). 91 25 mm nominal size 92 50 mm nominal size 93 Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 94 75mm dia 95 110mm dia 96 Supply of Stone Aggregate (Single size) : 20 mm nominal size 97 Supply of Safeda ballies 125 mm diameter 98 Supply of Bajri 99 Supply of Portland Cement 100 Supply of C.I. bracket for wash basin and sinks 101 Supply of Brass bib-cock 15 mm dia 102 Supply of Brass stop-cock 15 mm dia 103 Supply of Indian type white glazed vitreous china Ist quality W.C. orissa panSize 580x440 mm. 104 Supply of European type white glazed vitreous china Ist quality W.C. pan 105 Supply of Low level Flushing Cistern of 10 litres capacity : PVC with PVC bend as per IS : 7231 106 Supply of brackets 107 Supply of C.P. brass Urinal Spreader for stall urinal 108 Supply of Dome Waste couplingfor urinal 40 mm 109 Supply of Brass full way valve with C.I. wheel (screwed end) 25 mm dia 110 Supply of Brass full way valve with C.I. wheel (screwed end) 50 mm dia 111 Supply of C.P. brass waste coupling 40 mm 112 Supply of P.V.C Waste pipe with C.P. nut 40 mm dia 113 Supply of Vitreous china flat back wash basin 550x400 mm 114 Supply of Jet spray for water closet with C.P. Copper Tube flange 115 Supply of C.P. Pillar Cock 15 mm nominal size 116 Supply of GratingStainless Steel Sheet size 125mm dia. 117 Supply of Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm outer dia. 118 Supply of Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm outer dia. 119 Supply of U-PVC pipes (working pressure 4 kg / cm^2) Single socketed pipe 75 mm dia. 120 Supply of U-PVC pipes (working pressure 4 kg / cm^2) Single socketed pipe 110 mm dia. 121 Supply of Hydraulic door closer bottle type M.S. body with necessary accessories and screws complete 122 Supply of 9 mm thickcommercial ply 123 Supply of 30 mm thick prelaminated flush door shutter 124 Supply of 15 mm PTMT bib cock 125 Supply of PTMT pillar cock 126 Supply of PTMT Ball Cock 25mm Complete with Epoxy Coated Aluminium Road & H.D. Ball 127 Supply of SS wire gauge 128 Supply of 5mm Thick Float Glass (ISI make) 129 Supply of Oxidised mild steel handles 125 mm 130 Supply of Oxidised mild steel sliding door bolt 300x16 mm 131 Supply of Oxidised mild steel tower bolt (barrel type) 250x10 mm 132 Supply of G.I. pipes 50 mm dia (B Class) 133 Supply of G.I. pipes 80 mm dia (B Class) 134 Supply of C.P. Brass angle valve 15 mm 135 Supply of 15 mm nominal bore and 45 cm length PVC connection pipe with P.T.M.T. Nuts 136 Supply of Carpenter 1st class 137 Supply of Carpenter 2nd class 138 Supply of Beldar 139 Supply of Fitter (grade 1) 140 Supply of Assistant Fitter or 2nd class Fitter 141 Supply of Mason (average) 142 Supply of Mistry
