Tender For Construction Of Anganwadi Building Mylaudy West (33629010206) In Mylaudy Town Panchayat.; 1 Dismantling RRMasonry in cement motor walls under 3m High 2 Dismantling Brick workMasonry in cement motor walls under 3m High 3 Dismantling RCCMasonry in cement motor walls under 3m High 4 Earth work excavation for foundation in all soils such as red earth ,hard stiff clay soil, stiff black cotton soil, hard redearth,shales, murrams, gravel,hard rock not requiring blasting ete complete., 5 Cement concrete 1:4:8 mix usin 40 mm HBGS metal inculding cost and coveyance of all materials to site including labour for mixing ,l aying,curing etc complete., 6 Collection supply and filling of well gravel filling approved quarry including cost andConveyance of all materials to site and all labour charges for filling etc., Complete. 7 Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9 X 43/8X 2 3/4 including finishing, curing, etc., complete complying with standard specification 8 R.C.C.1:1 1/2:3 mix using 20mm ISS HBG metal including Cost and conveyance and all labour charges for mixing laying finishing and curing etc complete but excluding cost of steel & Centering charges etc., complete as per SS 9 Upto Basement 10 Supplying and fabrication,placing in position of mild steel or ribbed Tor steel grils for RCC works inculding cost of steel and binding wire etc. 11 Supplying and erection centering for sides and soffits inculding necessary supports and structing for plain surfaces such as RCC Slab,Lintel,Beam coloum,sunshade etc complete., 12 Upto Basement (Plain surface) 13 RCC works 14 Weathering Course with broken brick jelly 20mm size pure slacked lime over R.C.C. roof slab the preparation of 32:12.5 for required depth and slope etc.complete. 15 Finishing the top of roof with one course of machine pressed tiles 23 C.m x 23 C.m x 2 C.m size using cement mortor 1:3 mix mixed with 2% by weight of Crude Oil and pointing with Cement Mortor 1:3 mix Cost of all materials and labour charges and brick jelly concrete etc., complete as per standard specifications.same 16 Plastering in Cement Mortor 1:5 Mix (one cement, five M.sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. 17 Provision for Cupboard Cuddapah slab40 mm tkinclding supply and fixing etc 18 Finishing the top of flooring with granothatic flooring with cement concrete 1:2:4 (one cement, two sand and four aggrigate) using 10 to 12mm stone chips – 25mm tk etc., Complete. 19 Special ceiling Plastering in Cement Mortor 1:3 Mix (one Cement, Three M.sand ) 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications-10 m2. 20 Supplying and fixing over the floors best quality of scratch ceramic tiles of 30 c.m x 30c.m x 6mm sizeof approved colour laying with cement mortor 1:3 mix pointing the joints with colour pigments etc.Complete. 21 Dadooing walls withGlazed tiles of sizes 300mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed. 22 Supply, fabricating & fixing in position of M.S door of size 0..90 x 2.10m. The outer frame will be 25 x 25 x 3mm angle, the side frame with outer bars and M.S Sheets 1.60mm thick 20gauge MS sheet with necessary hinges, tower bolt, aldrop length 30mm and hold fast etc., complete complying with standard specifications. 23 Door 0.90 x 2.10 m 24 Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames.15mm MS square tubes for top, lock and bottom rails.The steel tubes shall be covered with 5mm thick solid PVC sheets.Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm.The over all size of top rail,Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter. 25 Supplying and fixing UPVC (Un-Plasticized PolyvinylChloride) Louvered Ventilators of from the profile the sizeof outer frame 60mm x 58mm and shutter profile size of 60x 78mm both profiles are reinforced with GI/1mm 125GSMand 100% corrosion free, the profile are multi chamberedsections with wall thick of 2mm. The EPDM rubber (blackcolour) covered with all over the edges of frame and shutter.The corners and joints should be welded and cleaned 26 Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specificationsfor 10 sqm 27 Painting Two Coats on new Iron works with best synthetic enamel paint of approved colour and quality – 10m2. 28 Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wallwith3 mm thick Hylum sheet cover withTW boxAnd 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good ofthe concealed portion with suitable colour for PVC concealed Light point / fan point (For electronic Regulator) SD 17 29 Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutorof 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wallwith150 mm X 100 mm X 113 mm TW switch boxwith3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plugwith continuous earth wire connection of 14 SWG TC wire for making good ofthe concealed portion with suitable colour forconcealed PVCplugpointSD 36 30 Supply and run of 2 of 1.50 sq.mm (22/0.30) PVC insulated SC unsheathed copper Conductor of1100 V grade on 7/20GI bearer wire for service connection mains SD 64 31 Supply and run of 2 X 1.5 sq.mm(22 / 0.30) PVC insulated SC unsheathed copper Conductor of1100 V grade in 25 mm dia GI pipe( Class B ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 70 32 Supply and fixing of 1200 mm ( 48) AC ceiling fan complete with stepped electronic 300 W regulator with 300 mmdown rod on the existing clamp. SD 110 33 Supply and fixing of single box type Compactflourescent tube fitting with copper choke and condenser with TWround block on wall or ceiling with flourescent tube with PVC unsheathedcopper leads from terminals to the fitting ofTube Light [SD88 ] 34 Supply and Fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit on TW plankon wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit SD125 35 Supply and fixing of 20W LED Tube Fittings 36 Supply and delivery of following PVC / G.I pipes and specials 37 110mm PVC pipe 4 ksc 38 110mm PVC Door Elbow 39 110mm PVC Tee 40 110mm PVC Plain Elbow 41 110x75 mm PVC Reducer 42 110 mm PVC Cowl 43 75mm PVC Pipe 44 75mm PVC Door Elbow 45 75mm PVC Plain Elbow 46 32mm PVC Pipe 47 32 mm PVC Tee 48 32 mm PVC Elbow 49 CPVC Tank Connector 50 32x25 PVC Reducer 51 25 mm PVC Pipe 52 25 mm PVC Tee 53 25 mm PVC Elbow 54 25 mm G.M Valve 55 Supplying & Fixing in position of white glazed Indian type water closet with P (or) S trap and Orissa slope set in brick jelly cement concrete 1:4:8 100mm thickusing 20mm thick brick jelly ISS gauge and finished to sludge out any leakage and defalut including cost of WC P (or) S trap and foot rest etc., complete - 1No. 56 Supply and delivery and fixing of 1000 litre HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc. (TWAD schedule of rate 2024-2025) 57 1/2 H.P Monoblock motor 58 Special design art work with first class quality enemal paint including wall putting priming coat extra complete and all other incidential charges if any as per standard specification 59 Planting of Adenium Specimen plant variety of height 105-120 cm in polythene bag of size 16x16inch including loading and unloading charges, HC-W0138 PD-1726 transportat i on, stacking of saplings at site, earth Eachwork excavation of required size, planting o fsapling, refilling of excavated earth etc asdirected by the site in- charge.PWD II(page no 287) 60 Provision for Play equipment
