|
| 1 | ALL KINDS OF SOIL |
| 2 | CEMENT CONCRETE GRADE M-10 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE |
| 3 | CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE. |
| 4 | THERMO-MECHANICALLY TREATED BARS. (FE 500 D OR MORE) |
| 5 | \"LINTELS, BEAMS, PLINTH BEAMS, GIRDERS, BRESSUMERS AND CANTILEVERS.\" |
| 6 | BRICK WORK WILL WELL BURNT OPEN BHATTA BRICKS CRUSHING STRENGTH NOT LESS THAN 25KG/CM² AND WATER ABSOPTION NOT MORE THAN |
| 7 | 1:4 (1 CEMENT: 4 SAND) |
| 8 | \"30 MM THICK INCLUDING ISI MARKED STAINLESS STEEL BUTT HINGES WITHNECESSARY SCREWS\" |
| 9 | \"EXTRA FOR CUTTING REBATE IN FLUSH DOOR SHUTTERS (TOTAL AREA OF THESHUTTER TOBE MEASURED).\" |
| 10 | \"EXTRA FOR PROVIDING LIPPING WITH 2ND CLASS TEAK WOOD BATTENS25 MM MINIMUM DEPTH ON ALL EDGES OF SHUTTERS (OVER ALL ARE |
| 11 | \"STRUCTURAL STEEL WORK RIVETED, BOLTED OR WELDED IN BUILT UP SECTIONS, TRUSSES AND FRAMED WORK, INCLUDING CUTTING, HOIST |
| 12 | KOTA STONE 25MM THICK FLOORING OVER 20 MM (AVERAGE) THICK BASE LAID OVER AND JOINTED WITH GREY CEMENT SLURRY MIXED WITH |
| 13 | NEW WORK (TWO OR MORE COAT APPLIED @ 1.67 LTR/10 SQM OVER AND INCLUDING PRIMING COAT OF EXTERIOR PRIMER APPL |
| 14 | PAINTING STEEL WORK WITH DELUXE MULTI SURFACE PAINT TO GIVE AN EVEN SHADE. TWO OR MORE COAT APPLIED @0.90 LTR/ |
| 15 | 20 MM NOMINAL OUTER DIA .PIPES. |
| 16 | 32 MM NOMINAL OUTER DIA .PIPES. |
| 17 | \"WHITE VITREOUS CHINA DUAL PURPOSE WC PAN WITH WHITE SOLID PLASTIC SEAT AND LID WITH WHITE VITREOUS CHINA FLUSHING CISTE |
| 18 | \"WHITE VITREOUS CHINA FLAT BACK WASH BASIN SIZE 550X400 MM WITHSINGLE 15 MM C.P. BRASS PILLAR TAP.\" |
| 19 | ORISSA PATTERN W.C. PAN OF SIZE 580X440 MM |
| 20 | \"WHITE VITREOUS CHINA SURGEON TYPE WASH BASIN OF SIZE 660X460 MM WITH A PAIR OF 15 MM C.P. BRAS |
| 21 | \"C.P.BRASS FITTINGPROVIDING AND FIXING C.P. BRASS BIB COCK OF APPROVED QUALITY CONFORMING TOIS:8931 - 15 MM NOMINAL BO |
| 22 | PROVIDING AND FIXING C.P. BRASS STOP COCK (CONCEALED) OF STANDARD DESIGN AND OF APPROVED MAKE CONFORMING TO IS:8931. - 1 |
| 23 | \"PROVIDING AND PLACING ON TERRACE AT ALL FLOOR POLYETHYLENE WATER STORAGE TANK ISI : 12701 MARKED WITH COVER AND SUITABL |
| 24 | 160 MM DIAMETER OD |
| 25 | \"EXTRA FOR PROVIDING LIPPING WITH 2ND CLASS TEAK WOOD BATTENS25 MM MINIMUM DEPTH ON ALL EDGES OF SHUTTERS (OVER ALL ARE |
| 26 | PROVIDING AND FIXING FACTORY MADE DOOR FRAME (SINGLE REBATE) MADE OF SOLID PVC FOAM PROFILE WITH HOMOGENOUS FINE CELLULA |
| 27 | 110MM DIA |
| 28 | 100 MM INLET AND 75 MM OUTLET |
| 29 | 110MM DIAMETER |
| 30 | 110X110X110 MM |
| 31 | 110 MM BEND |
| 32 | DARK SHADE USING ORDINARY CEMENT. |
| 33 | MOORUM/HARD COPRA |
| 34 | POLYESTER POWDER COATED ALUMINIUM (MINIMUM THICKNESS OF POLYESTER POWDER COATING 50 MICRON) |
| 35 | \"PROVIDING AND FIXING M.S. TUBULAR FRAMES FOR DOORS, WINDOWS, VENTILATORS AND CUPBOARD WITH ANY SECTION MADE OF 1.60MM O |
| 36 | \"SUPPLY & INSTALLATION OF PRECOATED GALVANISED IRON PROFILE SHEETS (SIZE, SHAPE AND PITCH OF CORRUGATION AS APPROVED BY |
| 37 | \"COURSE GRANITE LIGHT BLACK/ LIGHT RED/ OFF WHITE WITH SELF DESIGN/ PATTERN/CRYSTALS OF OTHER COLOUR OF GLITTER.\" |
| 38 | \"PROVIDING AND FIXING IST QUALITY CERAMIC GLAZED WALL TILES CONFORMING TO IS: 15622 (6 TO 7MM THICK) OF APPROVED MAKE I |
| 39 | LIGHT POINT/FAN POINTS. SHORT POINT |
| 40 | LIGHT POINT/FAN POINTS. MEDIUM POINT |
| 41 | LIGHT POINT/FAN POINTS. LONG POINT |
| 42 | \"POINT WIRING INCLUDING METALLIC SWITCH BOX, SHEET, SWITCHE, SOCKET FOR 3 PIN 6 AMP. SOCKET OUTLET POINT WITH 1.5 SQ. MM |
| 43 | ON SEPARATE BOARD SHORT POINT |
| 44 | ON SEPARATE BOARD MEDIUM POINT |
| 45 | ON SEPARATE BOARD LONG POINT |
| 46 | ON SEPARATE BOARD. EXTRA LONG -I |
| 47 | ON SEPARATE BOARD EXTRA LONG -II |
| 48 | ON SEPARATE BOARD EXTRA LONG -III |
| 49 | 3 X 2.5 SQ MM |
| 50 | 3 X 4.00 SQ MM |
| 51 | 6.0 SQ MM CABLE IN 25 MM CONDUIT |
| 52 | 10.0 SQ MM CABLE IN 25 MM CONDUIT |
| 53 | 6 AMP TO 32 AMP RATING |
| 54 | FOR 40 AMPS. RATING ONLY. DOUBLE POLE (DP) |
| 55 | 50 AMP TO 63 AMP RATING FOR TRIPLE POLE & NEUTRAL(TPN) |
| 56 | 16 WAY DOUBLE DOOR |
| 57 | 4 WAY DOUBLE DOOR |
| 58 | \"FIXING OF MCB /MCCB ISOLATOR TP /TPN/FP IN SHEET STEEL ENCLOSUREAS REQUIRED AS PER ACCEPTED PRACTICE, INCLUDING MOUNTI |
| 59 | \"FOR S.NO :-8.5(6) & 8.5(7), 8.6(6) TO 8.6(7), 8.7(2) TO 8.7(3) & 8.8(1) TO 8.8(3)\" |
| 60 | 450 WATT |
| 61 | CEILING FAN (ENERGY SAVER 50 W)-1200 MM SWEEP |
| 62 | 1 X 40/36 WATT |
| 63 | T - 5 LAMP 1 X 28 WATT |
| 64 | 200 MM |
| 65 | \"SUPPLYING AND FIXING DOWN ROD OF MS PIPE FOR CEILING FAN INCLUDING THREADING,PAINTING, MAKING HOLES ETC. AS REQUIRED C |
| 66 | \"EARTHING WITH COPPER EARTH PLATE 600MM X 600MM X 3MM THICK INCLUDING ACCESSORIES AND PROVIDING MASONARY ENCLOSER IN CEM |
| 67 | \"ADD EXTRA FOR USING SALT AND CHARCOAL / COKE FOR G.I. PLATE OR COPPER PLATE EARTH ELECTRODE AS REQUIRED INCLUDING EXCAV |
| 68 | \"LED LUMINIARE 1\" X 1\", 24W , 4-6.5K\" |
| 69 | LIGHT POINT/FAN POINTS.SHORT POINT |
| 70 | LIGHT POINT/FAN POINTS.MEDIUM POINT |
| 71 | LIGHT POINT/FAN POINTS.LONG POINT |
| 72 | \"POINT WIRING INCLUDING METALLIC SWITCH BOX, SHEET, SWITCHE, SOCKET FOR 3 PIN 6 AMP. SOCKET OUTLET POINT WITH 1.5 SQ. MM |
| 73 | ON SEPARATE BOARDMEDIUM POINT |
| 74 | ON SEPARATE BOARD LONG POINT |
| 75 | ON SEPARATE BOARD EXTRA LONG -I |
| 76 | CIRCUIT WIRING 2X2.5 SQ.MM. |
