Tender For Certain B And R Repairs In Otm Accn At Mil Stn Suranussi; 1 Demolition of brick work built in cement mortarincluding all quoins arches, pillars etc but including ashalr facing dressed stone work and precast concrete articles complete all as specified and directed 2 Demolition of cement concrete in ground floor and pavings not exceeding 15 cm thick above or below ground level,complete, all as specified & directed. 3 Taking down cement or cement lime plaster of any description on brick or stone walls, etcincl raking out joints hacking for keys srubbing down with water etc complete all as specified anddirected 4 Taking down chowkats or frames with Shutters( without taking off the shutter from the frame ) of area n.exc 1.50 Sqm each and removing from site complete all as specified anddirected 5 Taking down chowkats or frames with Shutters( without taking off the shutter from the frame ) of area exc 1.50 Sqm but n.exc 4.00 Sqm & removing from site complete all as specified anddirected 6 Taking down shutters of any description exceeding 1sqm each and not exceeding 2.00 sqm each complete all as specified anddirected 7 Taking down shutters of any descriptionsize exceeding 1 sqm and n.exc 2 sqm but refixing in the same opening complete all as specified anddirected 8 M&Lfor brick work , with sub class B bricks built in cement mortar 1:6 straight or curved on plan exc 6mtr mean radius, using old size bricks complete all as specified & directed. 9 All as per item No 8 above but except brick. 10 M&L for 15mm thick cement plastering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement complete all as specified & directed. 11 M&L 15 mm thick cement plastering in cement mortar (1:4) of brick work or concrete surfaces with using water proofing compound @ 3% by weight of cement or as per manufactures instructionfinished even & smooth without using extra cement complete all as specified. 12 M&l for 5 mm thickrendering in cement mortar in 1:3 on ceiling complete all as specified and as directed 13 Dismantling wall andCeiling boards any thickness, including cover fillets complete all as specified and as directed. 14 M&L for 12mm th perforated particle board/tiles for insulation and accoustic purpose 60X60CM in size fixedin frame work /grid complete all as specified and as directed. 15 M&L for605mmX605mm size anodised Aluminium snap grid frame work for false ceiling with aluminium angle 25X25X1.5mm thick and Tee 25X35mmX1.5mm thick and using 2mm GI wire adjustable as suspender in required length, complete all as specified and as directed . 16 S & F 5 mm thick printed colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site, complete all as specified and as directed . 17 S & F5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification & drawing and as directed, 18 Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete, all specified and directed. 19 S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , fixed withJ-type hook complete all as specified anddirected 20 S&F Pre-painted galvalume aluminum zinc coating GI based plain sheet ,sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , fixed withJ-type hook complete all as specified anddirected. 21 Dismantling posts or struts embedded in brick work/concrete(wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground. 22 S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering to Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to GdeFe 290(Gde E-165) complete all as specified anddirected 23 S&F solid PVC door frame of size 50mmX 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified anddirected . 24 S&F 30mm thick factory made PVC door shutter solid panel consisting of frame made out of MS tubes for top & bottom rails .Ms frame shall be covered with heat moulded plain colour PVC C channel having a PVC strip of 20mm width stuck inside with solvent cement for stiles and plain colourPVC sheet for top rail , lock rail &bottom rail on eitherside& as gap insertfor top rail & bottom rail . Panellingof plain of plain colurPVC sheet to be fitted in the MS frame welded/sealed to stiles & rails with suitable PVC sheet beading and joined together with solvent cement ,etc all as specified & shown on drawingsand as directed 25 S&F wire gauge shutter and skeleton shutter steel windows 1.25 mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm single rebate comprises of skeleton shutter ERW sec 50 x 20 mm & 1mm thick and openable leaf consisting two nos sash bar of T section 20x3mm complete welded to frame including cutting holes and making good dismanteled portion in cement concrete (1:2:4) type B-I four nos for each window including following fitting welded to shutter complete all as specified and as directed by Engineer-in-Charge :-(i) Hold fast 150mm long 12 mm x 3mm made to shape - 04 Nos each window.(ii) Handle of Z Section 20 x 25 mm, 100mm long 01 Nos each leaf.(iii) MS tower bolt 150 mm long-02 Nos each leaf.(iv) Z Section 20 x 25mm, 100 mm stopper - 01 Nos per leaf(v) Cleat 55 mm long of hollow square 15x20x63mm welded to hinges - 01 Nos per leaf.(vi) MS Box type hinges of size 75 X 12 mm - 02 Nos per leaf.(vii) MS Guard bars square 12mm dia @10 cm c/c with GI frame fixed to window frame.(viii) Fabrication and fixingNote :(i) Two shutters ie wire gauged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit. (ii) Wire gauge and glass shall be measured and paid for separately under relevant item of schedule. 26 S&Fgalvanized mild steel wire cloth 0.56mm dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staple, complete all as specified and directed . 27 S&F in 3mm th sheet glass ordinary quality glazing with oil putty in square n.exc0.5 sqm in each pane, complete all as specified and directed . 28 Hacking old broken glass of any size and desription from steel frame 29 S&F3mm th sheet glass ordinary quality glazing with oil putty in square n.exc0.5 sqm in each pane complete all as specified and directed . 30 All as per tem No 29 above but 3mm thick pin head/ figuered glass. 31 S&F 300mm size mild steel sliding door bolt plate type stove enamelledblack with bright bolt not less than 12mm diaincl a minimum of six nut and bolts ,four on bolt plate and two on stapple plate complete all as specified & directed. 32 S&F mild steel barrel tower bolt 200mm size stove enamelled black with bright bolt etc all as specified & directed. 33 S&F 125 mm size mild steel pressed handle stove enamelled black and fixed complete all as specified anddirected. 34 S&F 100 mm size mild steel butt hinges medium weight cold rolled complete all as specified anddirected . 35 S&F floor door stopperaluminium alloy body and tounge 140mm anodised with hard drawn steel spring etc complete all as specified anddirected. 36 S&F Door closer hydraulically regulated, designation No. 3, universal type,aluminium extruded section suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified anddirected 37 M & L for repairing of RCC projections ,chajjas,roofs,facia,etc.by necessary preparations i.e.scrapping cutting,chiseling,dusting and cleaning exposed reinforcement ,surface of damaged,loose RCC surface and applying one coat of cement slurry and filling the surface with cement cencrete (1:2:4) using 12.5mm garded crushed stone aggregate and finished with cement sand mortar (1;3) using coarse sand in patches area n exc 5 sqm each and thickness of RCC member exc 50mm including applying two coats of finishes to match with the existing surface in at any height all as directed by Engineer-In-Charge Note :Cost of form work and welded mesh for bldg ht upto 12m ,shall be deemed to be included in unit rate quoted by the contractor. 38 M&L for preparation of affected concrete and steel surface as in ceiling of roof slab, beams & chajjas by cleaning with metallic wire brush scrupulously and carrying out the following operations stepwise :-(a) Applying rust remover solution on steel bars by using cotton waste swab or by brush and leave the surface for 15-30 minutes. Remover the loose rust particles by scrubbing with brush and wash the steel surface with water.(b) Apply red oxide primer over cleaned steel surfaces. Apply epoxy bonding agent (adherent solution) over cleaned dust freed old concrete surface. Apply polymer mortar with the help of trowel in single or multilayer as an when required during application and finishing the surface even and smooth.Notes :- (a) The bars which are corroded badly need to be strengthen by placing new bars by means of welding withproper splice length and will be measured and paid separately under appropriate item. The rate of item includes necessary formwork, shuttering, scaffolding, staging hall be deemed to be included in unit rate quoted by the contractor. 39 S & F 1 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and cup board with all locking arrangement similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required,complete all as specified and directed 40 S&F in repair Vitreous china ware water closet Orissa pattern of size 580mm X 440mmincluding connecting to trap and to flushing pipe anti Syphonage pipe etc complete ,complete all as specified anddirected 41 S&F in repairs vitreous china water closet Padestal pattern( white ) includng trap but excluding fixing bolts, flushing cistern and flush pipe complete alldirected. 42 S&F in repairs PVC flushing cistern, 10 ltr capacity, valve less symphonic action type, low level, with intel, ball valve, float valve abd handle including brackets fixed in position, 32 mm dia PVC flush pipe and connection to water mains complete all as specified and directed. 43 S&F in repairs vitreous china urinals Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with urinal spreader ,grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)complete all as specified and directed. 44 S& F in repair vitrious china wash hand basin flat back550X400mm and padestalincl fixing bracket, pvc waste coupling and waste pipe,cp pillar tap (swan neck) etc all as specified and directed . 45 S&Fin repairs 600X450mm bevelled edge looking mirror of selected quality glass of 4mm thick etc mounted on AC board complete all as specified and directed. 46 S&F in replacement 20 mm dia harrison rails mild steel with decorative finish , with fixing brackets , stops, rollers complete all as specified and as directed (two brackets per 1.5 M length and 08 Nos roller per 1.RM) 47 M&L for PCC 1:5:10 typeE2 using 40 mm graded bricks aggregate as in filling in sunken floor etc all as specified and directed 48 Dismantling water tanks of any description exc 250 and n.exc 500 ltr capacity and removing to store complete all as specified and directed. 49 Dismantling water tanks of any description exc 500 and n.exc 1000 ltr capacity and removing to store complete all as specified anddirected. 50 S&FRotational moulded polythene water storage tankstriple layered (cylinder each vertical with closed top) of capacity 500 Itrs, hoisted and fixed in position including pvc float valve 20mm size,specified in SSR Pt-1 , complete all as specified anddirected 51 S&F Rotational moulded polythene water storage tankstriple layered (cylinder each vertical with closed top) of capacity 1000 Itrs, hoisted and fixed in position including pvc float valve 20mm size,specified in SSR Pt-1 ,complete all as specified anddirected . 52 Takingdown GI tubing and connections with all fittings 15 mm borecomplete all as specified anddirected. 53 All as per item No 52 above but 20mm bore. 54 S&F 15 mm dia GI water tubing ,medium grade with all fittings complete, fixed to wall and ceiling or laid in floors including making hole in RCC slabs for vertical pipes & making goods the same with cement concrete 1:2:4 including laid in floor etcetc complete all as specified anddirected. 55 S&F 20 mm dia GI water tubing ,medium grade with all fittings complete to wall and ceiling or laid in floors including making hole in RCC slabs for vertical pipes & making goods the same with cement concrete 1:2:4 including laid in floor etcetc complete all as specified anddirected. 56 S&F in repair PVC shower rose PTMT 15mm size fixed to iron pipe complete all as specified anddirected. 57 S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified anddirected. 58 S&F in repair 15mm size Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete, all as specified anddirected. 59 S&F in repair 15 mm bore dia bib tap (long or short body) cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for union fancy type chromium plated, concealed complete all as specified and as directed.. 60 S&F in repair 20 mm sizeStop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions , complete all as specified anddirected. 61 S & F in repair soap dish, vitreous China white, approximate size 160x 160x90mm , any type, fixed to plugs with chromium plated brass screws, complete all as specified anddirected. 62 S&F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete, all as specified anddirected. 63 S&F in repair 40mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe. complete all as specified anddirected. 64 S&F in repair 15 mm bore wall mountingbrass CP mixer for hot and cold water screwed down for iron pipe etc complete all as specified anddirected. 65 S&F in repair towel rail 600mm long of PTMT incl CP brass srews andwooden/plasticcleats (Minimum weight 190 gms) complete all as specified & directed. 66 S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified & directed. 67 Dismantling mild steel work of any description not otherwise provided for complete all as specified & directed. 68 M&L for preparing surfaces ofnew walls and applying two coats of oil bound distemper over and including a coat of wall care putty to achieve smooth finish surface on wall complete all as specified & dircted. 69 M&L for preparing surfaces new of walls and applying two caots of cement base paint over a coat of primercomplete all as specified & directed. 70 M&L for three coats of white wash on newly plastered surface of ceiling incl preparation of surface,complete all as specified & directed. 71 M&L for two coats synthetic enamel paint new wooden surface over 10 cm width or girth over a coat pink primer incl preparation of surfaces complete all as specified & directed. 72 M&L for two coats of synthetic enamel paint on new steel surface over 10cm width or girth over a coat red oxide primer incl preparation of surfaces complete all as specified & directed. 73 M&L for preparation of old treated surface of walland applying two coats of oil bound distemper over and including a coat of wall care putty to achieve smooth finish surface on wall complete all as specified & directed. 74 M&L for 75 mm th cement concretetype C-2, 1:3:6 as in plinth protectionwith using 40mm graded stone aggregateincl making joints at every 2.5m and at corner filled with bitumen 85/25 and sand in ration 1:2 by weightetc complete all as specified and as directed . 75 S&F in repair PVC SWR pipe 110 mm boresingle socketed in any length with rubber ring jointsfixed to walls/floor including taking down existing one etc, complete, all as specified & directed. 76 S&F in repair PVC SWR pipe 75mm single socketed in any length with rubber ring joints fixed to walls including taking down existing one etc,complete, all as specified & directed. 77 S&F PVC (SWR) 110 mm dia bends any radius complete all as specified 78 S&F PVC (SWR) 75mm dia, bends any radius complete all as specified 79 S&F 75mm size PVC (SWR) floor trap plain with grating incl to jointing with waste pipe with adhessive etc all as specified & directed. 80 S&F PVC SWR pipe 110 mm dia Branch pieces (Single T),single (equal or unequal ) ordinary or inverted or with parallele branches with oval access door complete allas specified 81 S&F PVC SWR pipe 75 mm dia Branch pieces (Single T),single (equal or unequal ) ordinary or inverted or with parallele branches with oval access door,complete, all as specified & directed. 82 S&F PVC SWR pipe 110 mm dia Branch pieces (Single Y),single (equal or unequal ) ordinary or inverted or with parallele branches with oval access door,complete, all as specified & directed. 83 S&F PVC SWR pipe 75 mm dia Branch pieces (Single Y),single (equal or unequal ) ordinary or inverted or with parallele branches with oval access door, complete, all as specified & directed. 84 S&F PVC SWR pipe 110 mm bore P Trapincluding taking down existing one etc, complete, all as specified & directed. 85 S&F PVC SWR pipe 110 mm bore S Trapincluding taking down existing one etc, complete, all as specified & directed. 86 S&F PVC SWR pipe 110 mm Junction vent cowl including taking down existing one etc, complete, all as specified & directed. 87 S&F PVC SWR pipe 75 mm Junction vent cowlincluding taking down existing one etc, complete, all as specified & directed. 88 S&F PVC SWR Floor trap pipe 75 mm dia outlet pipe ,plain with grating including jointing with solvent cement etc, complete, all as specified & directed. 89 S&F 100 mm dia stack clampmade out of25x4mmFlat iron etc all as specified 90 S&F 75mm dia stack clampmade out of25x4mmFlat iron etc all as specified 91 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), rmoving servicable tiles to store and rubbish off the premises, complete, all asdirected. 92 M&L for Granite (of any type) work (table rubbed and polished) 20 mm thickin steps, jambs, pillars, window- cills, cooking platforms and like in set incement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20 mm thick screed or bedding layer in CM 1:4 all as specified and directed. 93 M&L 20-25 mm thick machine cut kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, over 20 mm thick screed or bedding layer in CM 1:6 complete all as specified and directed. 94 All as per item No 93 above but as in skirting over 10mm thick rendering in CM 1:3 complete all as specified and directed by Engineer-in Charge. 95 M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed inneat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed or bedding layer in CM 1:6 complete all as specified and directed. 96 M&L Non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and including 15 mm th screed or bedding layer in CM 1:6 complete all as specified and directed. 97 M&L for vitrified ceramic light shade tiles 10mm thick (sqare/rectangular ) polished, area ofeach tiles exc0.42 sqm but not exc 1.00 sqm in floor etc ,set and jointed in neat cement slurry and pointed in white or colouredcementto match etc all as specified over and including 15 mm th screed bed or bedding layer in CM (1:6) complete all as specified and directed. 98 M&L for glazedceramictiles, coloured,of size 450x300x7mm thick on vertical surfaces such as in skirting, dado etc including 10 mm thick backing coat in CM 1:4 complete all as specified and directed. 99 Form work to soffits of suspended slab such as roof slab/Kitchen slab n exc200mm thick (horizontal/sloping/vertical) with fair finished surfacecomplete all as specified 100 M & Lfor TMT bars6mm to 8mm dia. cut to length bent to shape required including cranking, bendingand binding with and including ms wire (annealed) n. less than 0.9mm dia or securing with clips complete all as specified & directed. 101 Demolition of cement concrete (reinforced)of any description and in any position not otherwise specifically provided for as specified and directed. 102 M&Lfor reinforced cement concrete (nominal mix) Type B-0 1:2:4 (12.5mm graded aggregate) as inslabs supported on walls, beams, columnsdeck slabs and in shelves, the like all as specified and directed. 103 M & Lfor reinforced cement concrete (nominal mix) Type B-0 1:2:4 (12.5mm graded aggregate) in Chajjas all as specified and directed . 104 Providing & laying design mix cement concrete of M - 25 grade prepared in automatic batching plant (RMC plant) including transportation to site in transit mixer ,as in roads/pavements and like ,using cement content as per design mix ,using coarse sand and garded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria ,including providing of dowel bars with sleeve/tie bars wherever required ,laying at site spreading and compacting mechanically by using needle and surface vibrators ,levelling to required slope/camber ,finishing with required texture by brooming,including steel form work with sturdy M.S. channel sections curing making provision for contraction/Expansion joints,construction & Longitudinal joints (10 mm wide x 50 mm deep ) by groove cutting machine (size of bays as per existing or 2M x 2M /SSR Part I ) ,providing and filling joints with approved joint filler and sealants complete all as per direction of Engineer-in- charge.Note :- 1. The ready mixed concrete shall be laid and finished with screed board vibrator ,vaccum dewatering process and finally finished by floating ,brooming with wire brush etc complete as per specifications and directions of Engineer in charge . 2. Item of joint fillers/sealants filled with bitumen 85/25 and sand in ration 1:2 by weightdeemed to be included in the unit quoted rate etc3.use and waste of side form for laying pavement concrete/hardstanding in bays between joints & contraction expansion joints/or between the two contraction joints for thickness of pavement upto and including 25 cm shall deemed to be included in the unit quoted rate. 4Design mix cement concrete shall be prepared in automatic batching plant (RMC plant) including transportation to site in transit mixer and contractor shall quote his rates keeping this aspect in mind, complete all as specified and as directed by Engineer-in-charge. 105 S&F sliding/opening anodised aluminium powder coating (minimum thickness of powder coating 50 micron) door/window shutters including frame and made out of hollow extruded aluminium sections as mentioned below. Each door/window having 02 Nos D type handles, 02 Nos aluminum tower bolts 300mm size, hydraulic door closer. Shutter to be partly glazed with 5.5 mm thick, plain or tinted glass and party paneled with 12mm thick prelaminated particle board fixed with glazing clip, rubber beading/gasket, anodised aluminium beading, screws including bothside openable in door bottom hydraulic double action machine complete, all as specified and directed. Chowkat/frame: 101.60x44.45x1.60mm thick, shutter top and bottom rail: 114.30x44.45x1.55mm thick, Shutter middle rail 83.50x44.45x1.55mm, Shutter verticle style: 85x44.45x1.55 mm thick complete, all as specified & directed. 106 Cleaning and removing all scale and dirt, etc, from tanks of capacity Exc 250 & n exc 500 Ltrand from mouths of circulating pipes, etc complete all as specified and directed . 107 Cleaning and removing all scale and dirt, etc, from tanks of capacity Exc 500 & n exc 1000 Ltrand from mouths of circulating pipes, etc complete all as specified and directed .
