|
| 1 | Dismantling Asbestos cement (corrugated,semicorrugated,etc) sheet in roof coverings.complete all as specified and as directed. |
| 2 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.complete all as specified and as directed. |
| 3 | S&F, for pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thickof anycolour havingtensile strength of 550 Mpa as in roogf covering/ cladding to wall ,fixed with self tapping screws all as specified |
| 4 | S&F, for pre-painted galvalume aluminium zink coating GI basedplain steel sheet 0.50 mm thickof anycolour havingtensile strength of 550 Mpa as in roogf covering/ cladding to wall ,fixed with self tapping screws all as specified |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwiese provided for including gates all as sepcfied and directed |
| 6 | S&F Rolled section(angle,tee,square pipe,plate etc) as in main and crossed beam,post hip and rafters etc,fixed with angle cleats or other connecting plates rivets nuts bolts etc complete complete all as specified,conforming FE-410W (Gde E 250) quality B.complete all as specified and as directed. |
| 7 | S&F Rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete GDE Fe410-0 or Fe 310-O.complete all as specified and as directed. |
| 8 | M&L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and as directed. |
| 9 | M&L Preparation of old decoratedplastered or unplastered surface of ceilingand applying one coat of white wash complete all as specified and directed. |
| 10 | M&L preparation of old decorated plastered or unplaster surface of walls and applying one coat of acrylic Emulsion distemper any tint complete all as specified and as directed by Engr-in-Charge. |
| 11 | M&L preparation of old decorated plastered or unplaster surface of ceiling and applying one coat of acrylic Emulsion distemper any tint complete all as specified and as directed by Engr-in-Charge. |
| 12 | M&L preparation of old decoratedplastered or unplastered surface of walls and applyingtwo coats of acrylic Emulsion distemperany tint complete all as specifed and as directed. |
| 13 | M&L complete removal of existing treatment of any description3mm thick wall care puttyand rubbing with sand paper to achieve a level and smooth to wall and applying two coats of acrylic Emulsiondistemper over a coat of primer complete all as specified and as directed. |
| 14 | M&L preparation of old painted surfaces andapplyingone coat of synthetic enamel paint on wooden/concrete surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed. |
| 15 | M&L preparation of old painted surfaces andapplyingone coat of synthetic enamel paint on steel surfaces of any description not Exc 10 cm width or grith etc complete all as specifed and as directed. |
| 16 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbishto the out side of MD land.complete all as specified and as directed. |
| 17 | M&L Non skid joint free tiles coloured ceramic tiles 7 to 8 mm thick (square/Rectanglar) area of each tiles exc 0.18 Sqm but not exc 0.38 Sqm in floor including15mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.complete all as specified and as directed. |
| 18 | All as per item No-17 here in before but in skirting / dado including 10 mm thick rendering in CM1:4.complete all as specified and as directed. |
| 19 | M&L Endura tiles 9-10 mm thick of size 300X300mm in floor including 5mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.complete all as specified and as directed. |
| 20 | M&L double charged Vitrifiedtiles light shade 8-10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc.including15mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.complete all as specified and as directed. |
| 21 | M&L double charged Vitrified Ceramic tiles light shade 8-10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm as in skirting / dado including 10 mm thick rendering in CM1:4.complete all as specified and as directed. |
| 22 | M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1: 4complete all as specified and dricted |
| 23 | M&L Glazed coloured ceramic tiles in vertical surfaces 450 x 300 x 7 mm/600x300x7mm thick set joint in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer in cement mortar 1:6,10mm thick for laying dado/skirting tilesetc complete all as specified and directed. |
| 24 | M&L Applying polyurethene based liquid waterproofing composition on concerete or plastered suraface consisting as PU based modified acrylic despersion material having density 1.30 kg/ltr,water resistance applies in 3 layers (prime coat @ 0.3kg/sqm,base coat @0.5 kg/sqm,top coat @ 0.5kg/sqm) as per manufacturer instructions.make: Sika lastic-590IN or equivalant,complete as directed |
| 25 | Taking down cement plaster on brick or concrete surface etc including racking out joints hacking for key scrubbing downwith water etc.complete all as specified and as directed. |
| 26 | M&L rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finishing the surface fair and even and smooth with out using extra cement.complete all as specified and as directed. |
| 27 | M&L for rendering 15 mm thick in cement mortar (1:4) on other than fair faces of brick or concrete surfaces (5mm thick CM 1:4 with WPC setting coat and 10mm thick CM 1:4 backing coat), finished even & fair without using extra cement all as specified and directed by Engineer-in-Charge.Note :- WPC measured and paid separetely. |
| 28 | M&L, rendering 5 mm thick in cement mortar 1: 3 on ceiling / soffits of chajjas etc finishedeven and smooth without using extra cement complete all as specified and directed. |
| 29 | Supply only integral water proofing compound. |
| 30 | M&L preparation of newly plastered surfaces ofceiling and applying three coat of white wash on new surface complete all as specified and as directed. |
| 31 | M&L for preparation of new plastered surfaces applying 3 mm thick wall care puttyand rubbing with sand paper to achieve a level and smooth to walland applying two coats of oil bound distemper over a coat of primer on walls complete all as specified and as directed. |
| 32 | M&L preparation of old plastered or unplasteredsurfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed. |
| 33 | Dismantling of stone slabs and tiles of any description or thickness as on platform, shelves, floors etc laid, bedded and pointed in any mortar .complete all as specified and as directed. |
| 34 | M&L 20 mm thick Granite (Zed black) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade of granite.complete all as specified and as directed. |
| 35 | Taking up or down 15mm diaGI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 36 | Taking up or down 20mm diaGI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 37 | Refixingold steel tubing and connections 15mm bore in newor old position (valve, ceiling , floors) etc complete all as specified and as directed. |
| 38 | Refixingold steel tubing and connections 20mm bore in newor old position (valve, ceiling , floors) etc complete all as specified and as directed. |
| 39 | S&F GI tube 15 mm diamedium grade galvanised with all fittings laid in floors /wall etc. complete all as specified and as directed. |
| 40 | S&F GI tube 20 mm dia medium grade galvanised with all fittings laid in floors /wall etc. complete all as specified and as directed. |
| 41 | Taking down PVC rain water pipe any size or pattern including all fittings all as specified and directed. |
| 42 | S&F 110mm bore PVC (swr) pipessingle socketed in any length with rubber ring joints fixed to wall/laid in floor.complete all as specified and as directed. |
| 43 | S&F 110mm bore PVC (SWR) bends any radius.complete all as specified and as directed. |
| 44 | S&F 110mm dia PVC (SWR) junction, single (single T) equal or unequal with door access all as specified and as directed |
| 45 | S&F PVC (SWR) floor trap plain with grating lincluding jointing with solvent cement 75mm dia all as specified. |
| 46 | S&Fin repairs Vitreous China Wash down water closetpan (Pedestal pattern), white incl P or S trap and in cludingplastic seat cover etc (excluding flushing cistern and flush pipe) complete all as specified and as directed |
| 47 | S&Fin repairs Vitreous China Single piece Wash down water closet pan(Wall/Floor mounted), white incl necessary trap and including necessary accesorries and fittings complete all as specified and as directed.Make : Jaquar cat part no :SLS-WHT-6851 or equivalant make of Prayag/Parryware/Marc |
| 48 | S&F in repairs vitreous china squatting pan \"Orissa\" pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap andcomplete all as specified and as directed |
| 49 | S&F chromium plated Health faucet ABS SS Braided hose 1m long with CP hook,and fixed for 15mm bore dia(Fancy type).Make:Jaquar Cat part No: ALD 565 or equivalant make of Prayag/Parryware/Marc |
| 50 | S&F CP toilet paper holder including cutting recess in wall complete all as specified and directed. |
| 51 | S&F in repairsPVC valveless,syphonic action type, low level PVC flushing cistren 10 ltr capwhite with flush pipe & all fittingcomplete all as specified. |
| 52 | S&F in repair Counter Top WHB of size 550x450x200 mm (self-rimming) white coloured of including fittings complete all as directed.Make:Jaguar cat part no: ARS WHT 39601 or equivalant make of Prayag/Parryware/Marc |
| 53 | S&F 15mm dia swan neck Pillar cock,cast copper alloy,foriron pipe and fixed complete all as specified.Make:Jguar cat part no : CQT-23021 or equivalant make of Prayag/Parryware/Marc |
| 54 | S&Fin repairs tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges ofbrass chromium plated including brackets. complete all as specified and as directed. |
| 55 | S&FPVC connections 15 mm size with PTMT nuts of length 450 mm |
| 56 | S&FPVC connections 15 mm size with PTMT nuts of length 600mm.complete all as specified. |
| 57 | S&F in repairs 32mm dia Waste coupling, brass , chromium plated for glazed ware , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed.complete all as specified. |
| 58 | S&Fin repair chromiuim platedSwivel shower roses with shower arm, 125 mm size including fxing to steel pipe or union etc.complete all as specified. |
| 59 | S&Fin repairs 15mm External Bath shower Mixerincluding fittings complete all as specified. |
| 60 | S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe.complete all as specified. |
| 61 | S&Fin repair C.P bib taps cast copper alloy with capston headed handles, screwed down screwed for iron pipe 15 mm bore or for brass ferrule complete all as specified. |
| 62 | S&f in repair vitreous China Urinal, Half stall type, white of size (380x405x590mm) (excluding flushing cistern, flush pipe and waste pipe) with brass chromium plated sprader of Make Parryware or equivalent complete all as specified & directed incl.push button Cat part no :URS-WHT-13253N or equivalant |
| 63 | S&F Sensored Urinal of any sizeWith Sensor and Fixing Accessories complete all as specified and as directed.Make:Jaquar cat part no :URS-WHT-13255 or equivalant make of Prayag/Parryware/Marc |
| 64 | S&F urinal glass partition with forsted glass 9-10mm thick chrome finished incl. SS fixing bracket complete all as specified and as directed.Make : Jaguar cat part no:1810-UC or equivalant make of Prayag/Parryware/Marc |
| 65 | S&F in repair soap dish, any type fixed to plugs chromium plated brass screws . |
| 66 | Demolition of brickwork or stone/ boulders masonry built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc. but not excluding ashlar facing dressed stone work and precast concrete articles. |
| 67 | M&L Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 Complete all as specified and as directed. |
| 68 | M&L Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick built in CM 1:4 completeall as specified and as directed |
| 69 | S&F in repair galvanised mild steel wire cloth 0.63 nominal dia of wires and average width of aprarture 1.40 mm and fixed with tinned tacks galvanised wire staples fixed in repair including a coat of french blue paints.completeall as specified and as directed |
| 70 | Taking down Chowkhats or frames with shutters (wihout taking off shutters) from the frame n.exc 1.5 sq. m complete all as specified and as directed |
| 71 | Taking down Aluminium door shutters any size and refixing in the same opening including making petty repairs as required like cleaning and repair/replacement of beadings, glazing clips, rubber gasket, stoppers, adjusting tower bolts, locks, hydraulic door closer, hinges etc and make smooth functioning with entire satisfaction of Engr-in-Charge complete all as specified and as directed |
| 72 | Taking down Aluminium window shutters any size and refixing in the same opening including making petty repairs as required incl cleaning and repair/replacement of beadings, glazing clips, stoppers, rubber beading, locks, stays, hingesetc and make smooth functioning with entire satisfaction of Engr-in-Charge complete all as specified and as directed |
| 73 | S&F Anodised aluminium window & ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 74 | Supply and fixing factory-made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) up to 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately)Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 75 | S&F Sheet glass 4.8 mm thick, ordinary quality & glazing with oil putty in square but n.exc 0.5 sq.m in each pane.complete all as specified and directed. |
| 76 | S&F 12mm thickToughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required,complete all as specifed and as directed. |
| 77 | S&F factory made solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specifed and as directed |
| 78 | S&F factory made solid panel PVC moulded doorshutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement etc completeall as specified and as directed |
| 79 | S&F for aluminiumanodized barrel tower bolts 150 mm of extruded section and fixed. |
| 80 | S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI markedall as specified. |
| 81 | S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 all as specified and as directed. |
| 82 | S&F rotational moulded polyethylene five layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes with andincluding 20mm Brass ballvalves high pressure with polythene float and nut with and including dismantling exsiting unservieable tankone complete all as specified and directed .all as specified and as directed. |
| 83 | S&F rotational moulded polyethylene five layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 1000 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes with andincluding 20mm Brass ballvalves high pressure with polythene float and nut with and including dismantling exsiting unservieable tankone complete all as specified and directed .all as specified and as directed. |
| 84 | S&F in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms/ 50mm-1240 gms) |
| 85 | S&F in repairs 25mm dia Harrison rails/curtain rod, mild steel, chromium plated,but of anodised aluminium alloy with fixing brackets, stops, rollers etc completeall as specified and as directed |
| 86 | Demolition of cement concrete/interloking (unreinforced) in ground floor and paving n.exc 15 cm thickness below and above ground level all as directed. |
| 87 | M&L 100mm thick PCC (1:2:4) type B-2 using 40 mm graded stone aggregate as in ground floor/hardstanding/ Path/plinth etc complete all as specified and as directed. |
| 88 | M&L sand filling under interlocking tiles or in foundation including watering and consolidation |
| 89 | M&Lwith greay cement and pigment Machine pressed precast concrete interlocing paver block any shape and size conforming to IS 15658-2006 of 60mm thickness M-35 gread complete all as specified |
| 90 | Cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) as in sub base, 75mm thick, complete all as specified and directed. |
| 91 | M&L with grey cement and pigment Cement concrete tiles 30 cm x 30cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors,and cut and polised including scvreed bed 20 mm thick in cm 1:6complete all as specified and as directed |
| 92 | M&L 75mm thick PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in Plinth protection etc complete all as specified and as directed. |
| 93 | M&L Providing, cement concrete in kerbs or mud stops, rounded or chamfered on edge in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as type B1 (1:2:4) (20 mm graded aggregate), as directed |
| 94 | Dismantling of wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness including cover fillets of any description including all snap grids and hanging arrangements complete all as specified. |
| 95 | M&L Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed. |
| 96 | M&L 8mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) complete all as specified and as directed |
| 97 | Taking Down and refixing of old chain link fencing with necessary accessories complete all as specifed and as directed. |
| 98 | Dismantling/taking down u/s parts of steel rolling shutters (self coiling types shutters i.e push pull with gear oprating type machnically or moter operated ) area n.exc 20.00 Sqm and for repairing and overhauling of rolling shutters and greading/oiling of members of rolling shutters.M&L preparation of old painted iron and steel surfaces by scraping & rubbing down with sand paper, removing dense and scratches, if any and filling the same with paste filler and applying one coat of synthetic enamel paint complete all as specified.Note : (I) Refixing/welding of rolling shutters duly repaired/overhauled/welded/painted shall be included in the quoted rates of this item. (ii) Fixing of new parts of rolling shutters shall be included in the quoted rate of this item.(iii) Replacing of new parts of rolling shutters shall be paid and measured separately as supplying only under the relevent items.(iv)Makes/Size/Specifications of new parts of rolling shutters as per existing specificarion of rolling shutters. (v) Any damage or loss of rolling shutter during taking down/dismantling shall be made good by the contractor at his own cost. |
| 99 | Supply only safety lever locks and gear mild steel with 4 Levers forrolling shutters complete as per existing size/make . |
| 100 | Supply only MS sheet 1.25mm thick for hood cover complete all as specified |
| 101 | Supply only curtain i.e interlocking lath sections formed from cold rolled steel strip 0.9mm thick complete all as specified |
| 102 | Supply only helical wire spring or flat spiral springs complete all as specified |
| 103 | Supply only ball bearing (ISI marked) size & make as per existing old type complete all as specified |
| 104 | Supply only MS 40mm bore pipes \"heavy weight\" for suspension shaft complete all as specified. |
