Tender For Rate Contract For For Carp/ Alumn/Pvc Maintenance Works In Tmh For The Year 2025-27, parel-Maharashtra

Tender For Rate Contract For For Carp/ Alumn/Pvc Maintenance Works In Tmh For The Year 2025-27; 1 Providing and fixing in position Telephone Stand of required size made out of 12mm thick commerical plywood of approved make with 6.00 mm thick teak wood lipping of required shape from all sides with 1.00 mm thick plastic laminate on top of required colour mounted on teak wood patti/ bracket of suitable size for fixing on wall for single telephone, polishing with french polish for non laminated area etc. all complete as specified and directed. 1.1 9 inch x 10 inch single telephone stand. Nos 550 2 Providing and fixing in position Shelf of required size made of 19mm thick ply of approved make with T.W.lipping patti of 6mm thick of required size to all exposed surface with 1.5mm approved laminated on top of the shelf mounting over the bracket made out of 40mm x 40mm T.W section bracket with french polish to all non laminated surface with bracket.Etc.complete all specified and directed by Engineer-in-Charge. Sqm 3500 3 Providing of foot rest made out of 12mm commercial plywood of approved make 18 inch x 12 inch to required angle and height including providing 6mm thick T.W.beading all around the exposed edges and making necessary cut outs/openings both sides of the foot rest as per site requirement and polishing with french polish or with 1.00mm thick formica to desired finish etc. complete as per specified and directed by Engineer-In-Charge. Nos 1500 4 Notice Board providing and fixing notice board made out of 1inch x 2 inch thick teak wood frame work with 6mm thick commercial plywood of approved make and quality for back above that soft board of .5 inch thick pasted with approved adhesive and covered with tepastry felt cloth (jute fibre) required colour glass doorshutters consisting of 1.5 inch x 1 inch thick teak wood frame with 3mm thick clean glass fixed with T.W. beading patti both side and fixing with brass hinges of required size including acrylic knobs of 1inch dia. Locking arrangement with godrej multi purpose locks 2inch brass tower Bolts, back catch in case of double shutters including french polishing 2 coats as specified all over wood surface etc.all complete as specified and directed to the satisfaction of Engineer-InCharge. 4.1 For single shutter Sqm 4000 4.2 For double shutter Sqm 4500 4.3 Open type notice board. Sqm 2000 5 KEYS HOLDING CABINET: cabinet providing and fixing Key board made out of 1 ½ inchx2 inch thick teak wood frame with 12mm thick ply of approved make for back fixing ½ inch Dia brass C.P. cup hook at required spacing on back ply. Door shutters single or double leaf consisting of 1 ½ inch x2 inch thick T.W. frame with 5.00 mm thick clear glass fixing with T.W.bedding patties from both sides and fixing with brass hinges of required size with necessary ball catch, acrylic knons of 1inch dia locking arrangement with godrej multi purpose lock, 2 inch brass tower bolts in case of double shutter including french polish of 2 coats of required shade all over wood surface including providing necessary wall mounting hardware etc. all complete as specified and directed to the satisfaction of Engineer-In-Charge. 5.1 For single shutters. Sqm 4500 5.2 For doube shutters. Sqm 6000 5.3 Open type. Sqm 2300 6 Wood Work 6.1 Providing wood work with 1st class teak wood in frames for doors windows, ventilators, Air-condition frames, clear story window, false ceiling and partitions etc.wrought framed and fixed in position including applying one coat of approved wood primer to the exposed surfaces and tow coats of bitumastic paint to the surface of wood in contact with masonry/concrete etc.complete. Cum 142949.7 6.2 Providing wood work with sal wood in frames for doors windows, ventilators, Aircondition frames, clear story window, false ceiling and partitions etc.wrought framed and fixed in position including applying one coat of approved wood primer to the exposed surfaces and tow coats of bitumastic paint to the surface of wood in contact with masonry/concrete etc.complete. Cum 116500 6.3 Labour charges only for fixing available wooden frame work for door/windows modified with required size with necessary cutting making groove for shutters or adding addition batterns to make frame ready to fix. Providing M.S. hold fast of size 40mm x 3mm x 150mm long bend to shape and embedded with cc and painting two coats fo bitumestic paint to sides of frame coming in contract masonary/concrete etc.complete. 6.3.1 Door frame / window frame with hold fast Sqm 650 6.3.2 Door / Window frame with out hold fast Sqm 500 7 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 7.1 Door shutters with locking arrangement 4 lever mortice lock with handle set of approved make. 7.1.1 35 mm thick Sqm 4030 7.1.2 30mm thick Sqm 3680 7.2 Labour charge only for removing and re-fixing available door shutter / window frame with necessary modification including cutting the existing shutter providing leeping patti all around the shutter if required including removing and refixing availbale old hinges, mortice lock, tower bolts ect. fixing aligning the door shutter in proper plumb and level etc. complete all as per specified and directed by Engineer-In-Charge 7.2.1 Removing and refixing door shutter Nos 906.4 7.2.2 Only fixing available door shutter with necessary repairing Nos 1019.7 7.2.3 Only removing door frame ( Toilet) Nos 283.25 7.2.4 Only removing window frame (Toilet) Nos 226.6 7.2.5 Removing door frame with shutters all sizes Sqm 169.95 7.2.6 Removing windows with shutters all sizes Sqm 169.95 7.2.7 Removing only door / window shutter Sqm 113.3 7.2.8 Removing m.s grill Sqm 113.3 8 Providing and fixing door closer of Everite/Hyper make confirming to is 3564 (left or right) to the existing door shutter including cost of all other materials labour etc. all complete as specified and directed. 8.1.1 Door closer No.2 Everite /hyper / TECMA Nos 2420 8.1.2 Door closr No.3 Nos 2800 8.1.3 Archies make hold open arm door closer Nos 5000 8.2 Providing and fixing door closer arm of Everite/Hyper make for door closer No. 2 and 3 with necessary alignment of door shutter etc. complete as specified and directed by Engineer-In-Charge. Nos 250 8.3 Archies Approved make hold open arm door closer repairing work Nos 300 8.4 Providing and fixing pelmet type door closer of ISI mark heavy duty to the existing door shutter including cost of all other materials labour etc. all complete as specified and directed. Nos 5500 9 Providing making and fixing in position Pelmet of size 125mmx125mm made out of 19mm thick commercial ply with Phenolformouldehyde bonded synthetic resin generally confirming to IS 3087 of approved make with 6mm T.W.lipping all round the edges and all exposed faces should be 1.5mm. thick plastic laminated of approved make. Aluminium heavy duty channel to be provided with Nylon/S.S.holes at every 6 inch intervals polishing to non laminated surface with two coats of french polish and G.I. eye holes fixing on wall as per requirement etc.all as specified and directed by Engineer-In-Charge. Rmt 1200

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	23-06-2025	Corrigendum 01	Date	30-06-2025

Refer document

INR 94400.0 /-

INR 40 Lakhs /-