Tender For Addn/ Altn To Certain Smqs At Af Stn Sarsawa Under Ge (Af) Sarsawa; 1 Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonryand removal complete all as specified and directed. 2 Demolition of cement concrete (un-renforced) in ground floor and paving. exc. 15 cm thickness(below or above ground level.) and removal of rubbish material complete all as specified and directed. 3 Taking downchowkhats(without taking off shutters from the frames) chowkattsn exc 1.5 sqm each complete all as specified and directed. 4 Taking down chowkatts (without taking off shutters from the frames) chowkatts exc 1.5 sq. m but n exc 4 sq m each complete all as specified and directed. 5 Taking down shutter of any decription exc.1Sqm and n.exc 2 Sqm complete all as specified and directed. 6 Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 7 Taking down cement plaster any description on brick or stone any description complete all as specified and directed. 8 Taking up or down 15mm steeltubing and connections, including cleaning for refixing or removal to store complete all as specified anddirected. 9 Taking up or down 20mm steeltubing and connections, including cleaning for refixing or removal to store complete all as specified anddirected. 10 Demolition/Removal of existing RCC water tank including cover (Capacity not exc. 1000 Ltr) placed on roof of the Bldgs/Quarters including removal of their staging/platform complete all as specified and directed.Note : (i) Tank/staging shall be taken down after demolition in small pieces.(ii) Demolition shall be carried out carefully without damaging roof treatment.(iii) Roof treatment came out/damaged during demolition shall be made good with same specification without any extra cost.(iv) Small trees/Plantation near the tank shall be uprooted and roof treatment shall be made good. 11 S & F Sand cast,100 mm diaCast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors and including dismantling of old u/s pipes complete all as specified and directed. 12 S&F Sand cast,100 mm diaCast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in wall and including dismantling of old u/s pipes complete all as specified and directed. 13 S&F Sand cast, 75 mm diaCast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors and including dismantling of old u/s pipes complete all as specified and directed. 14 S&F Sand cast, 75 mm diaCast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in wall and including dismantling of old u/s pipes complete all as specified and directed. 15 S & F in repair CI Bends 100 mm dia(any radius),diminishing pieces or tapers (larger bore measured) complete all as specified and directed. 16 S & F in repair CI Bends 75 mm dia(any radius),diminishing pieces or tapers (larger bore measured) complete all as specified and directed. 17 S & F 100mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. 18 S & F 75mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)complete all as specified and directed. 19 S & F in repair 150mm x150mm Salt-glazed stoneware gullytraps, square or round mouthed, type P including dismsntling old trap complete all as specified and directed. 20 M & L for brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar (1:6) complete all as specified and directed. 21 M & L for brick work with old size sub-class ‘B’ bricks,(OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and directed. 22 M & L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. 23 M & L Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed. 24 S & F 35mm thick IInd class hard wood panelled door shutterwith lock rail and panelof 9mmBWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. the size of rail and stiles as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated and fixed to chowkats complete all as specified and directed. 25 S & F 35 mm thick IInd class hard woodGlazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkatscomplete all as specified and directed. 26 M & L for preparing of new untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (of approved shade) over a coat of pink primer complete all as specified and directed. 27 S & F stainless steelhinges 100mm long medium weight,complete all as specified and directed. 28 S & F 150mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. 29 S & F 150mm Aluminium handles, cast type, anodised complete all as specified and directed. 30 S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. 31 S & F anodized aluminium frame and other sections for doors, windows, ventilators, partitions, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. 32 S & F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified and directed. 33 S & F anodized aluminium grill with power coating (minimumthickness 50 micron) of approved pattern and fixed to the existing window/ventilatorframe with CP brass/stainless steel scrwed @ 200mm center to center, including cutting the grill to proper opening sizefor fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement complete all as specified and directed. 34 M & L for PCC (1:2:4) type B-1 (using20mm graded stone aggregate), 25mm thick, as in Sub base complete all as specified and directed. 35 M & L for Vetrified Ceramic tiles 10mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and over 15mm thick cement screeding in cement mortar (1:6)complete all as specified and directed. 36 M & L for Vetrified Ceramic tiles 10mm thick light shade (square/rectangular) polished, area of each tiles nexceeding 0.36, in vertical surfaces as skirting and dados etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and over 10mm thick rendering in cement mortar (1:4) complete all as specified and directed. 37 M & L Non - skid Ceramictiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and over 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed. 38 M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and over 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed. 39 M & L Glazed ceramictiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cement mortar (1:4) complete all as specified and directed. 40 M & L Rendring 10mm thick on fair faces of brick work or concrete surfaces on wall in cement mortar (1:6) complete all as specified and directed. 41 M & L Rendring 5mm thick on fair faces of brick work or concrete surfaces on ceiling in cement mortar (1:4) finished even and smooth without using extra cement ccomplete all as specified and directed. 42 M & L for preparation of newly plastered surfaces & applyingthree coats of white wash on ceiling complete all as specified and directed. 43 M & L for preparation of new plastered surfaces of walls and applying one coat of Oil bounddistemper overa coat of 1mm thick wall care putty of approved tint complete all as specified and directed. 44 S & F 4.8mm thick Sheet glass, ordinary quality and glazing with rubber bedding in square n exc 0.5 sq.m in each panecomplete all as specified and directed. 45 S & F 5mm thickfrosted glass with rubber bedding in square n exc 0.5 sq.m in each pane complete all as specified and directed. 46 S & F GI tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor complete all as specified and directed. 47 S & F 20mm GI tubing Medium grade fix to wall/floorcomplete all as specified and directed. 48 S & F Stainless steelkitchen sink, single bowl handmadekitchen sink withmulti-functionaland silver 1mm thick (weightnot less 6kg ) with plugs, washers and waste pipe including bedding in cement mortaror including and fixing cast iron cantileverbrackets and connecting union to pipebowl size 600x450x250 mm including flush pipe of polyethylene of low or high density or PVC 32mm bore with long screwed shanks and fly nuts complete all as specified and directed. 49 S & F Rotational moulded polyethylene water storage tanksof 500 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. 50 S & F ball valves brass high pressure with polythelene float and fly net complete, screwed , iron pipes 15 mm diacomplete all as specified and directed. 51 S&F in repairbib taps, chromium plated alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed omplete all as specified and directed. 52 S & F in repair angle valves, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm dia long sunk concealed type complete all as specified and directed. 53 S & F in repair Vitreous China Squatting pan, Orissa pattern, size 580 x 440mm white with integral foot rests connection to trap and to flushing pipe,etc.complete including making food to floor complete all as specified and directed. 54 S & F PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacitylow level, white, with intel, ball valve, float and handle including brackets complete all as specified and directed. 55 S & Fbrass chromium plated shower rose 125mm size with swivel joint type including fixing to steel pipe of 15mm bore or union complete all as specified and directed. 56 S & F vitreous china wash down water closet pan (Padestal pattern), white (ISI marked), including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonoage pipe etc & with plastic WC seat cover (white) closed pattern with flat bottom and cover and suitable mild steel chromium plated or aluminised hinging device including demolition of old existing unserviceable EWC seat complete all as specified and directed. 57 S & F in repairs vitreous china wash basin white of size 630x450mm (ISI marked) flat back or angle back type excluding taps, waste chain & plug but incuding cast iron brackets and cutting for and pinning in ends of brackets or erecting stand complete fixed in repairs all as specified and directed. 58 S & F brass chromium plated WHB mixer for mixing hot & cold water screwed down for iron pipe of 15mm bore complete all as specified anddirected. 59 S & FPVC connection of 15mm bore with2 Nos. PTMT nuts, 60cm long fixed with one end to pillar tap & the other end to stop cock or iron pipe complete all as specified and directed. 60 S & F mild steel work such as angle iron inrails, braces ,stairs (framed) including stringers, treades, landing, balusters, hand rails, posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc) including necessary welding where required as per site requirement and other similar works complete, conforming to Gde E-165 (Fe 290) complete all as specified and directed. 61 S & F MS grating CP 100mm dia, and including floor trap with hole/without for waste pipe of approved make including fixing with CM to floor/nahani traps and including dismantling old u/s grating/traps complete all as specified and directed. 62 S & F in repairs powder coated stainless steel drapery rod of 25 mm inner dia (in lengths as directed) of approved colour with & including decorative bowel at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, including PVC curtain rings of matching colour @ 10cm C/C complete all as specified and directed. 63 S & F wall mixer chromium plated (2 in -1) with arrangement for overhead shower with 220 mm max long bend pipe including 125mm x125mm over head shower complete all as specified and directed. 64 S & F sink mixer chromium plated complete all as specified and directed. 65 S & F 18/19mm thick High Density High Moisture Resistant board (HDHMR) Prelaminated both sides as in Controllers Desk ,palmed boxes,showcase,shutters of Cup Boards, drawer fixed with MS heavy duty telescopic slide channel of any sizeetc including 6mm designing teak wood beading on edges complete all as specified and as directed. 66 S & F 150mm extruded brass handles, fabricated type polished complete all as specified and directed. 67 S & F stainless steel pie corner hinge 135 degree and size 150x150x100mmcomplete all as specified and directed. 68 S & F FAST DM01SS Stainless Steel Furniture Door Catcher Magnet Size No. 2 for for wardrobe, Cupboard and Almirah Door. (SS MAT)with Mounting Screw complete all as specified and directed. 69 M & L stainless steel (Grade 304) kichen cabinet storage basket & drawers for food items & kitchen utensils of any size and shape, corrosion resistance, seamless glossy finish, high quility, pullout basket with telescopic drawer channel of any sizeetc.including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size,complete all as specified and directed. 70 S & F in repair glass corner shelf complete all as specified and directed. 71 S & F in repair glass shelf rectangular type complete all as specified and directed. 72 S & F in repair 2-in-1 CP bib cock complete all as specified and directed. 73 S & F in repair 2 wayCP angle cock completeall as specified and directed. 74 S & Fin repair Brass chromium plated towel rack 24 long,fixed in position with steel screwscomplete all as specified and directed. 75 Takingdown carefully copper / aluminium point wiring inclucluding sunken box of piano/modular type, light / fan, socket or power point complete including fittings such as switches, sockets, ceiling rose, pendants, bell push bell buzzer lamp holder bracket etc. removing from site for taking credit and making good disturbed surface of wall, floor etc complete all as specified and directed. 76 M & L for replacement of concealed point wiring complete with PVC insulated and unsheathedFRLS cable of 1.5 sqmm (nominal area) with multistranded copper conductor single core 1100 volts grade in and including rigid PVC conduit ISI marked medium grade not less than 20 mm dia,with MS stove enamelled sunkenboxes (normal and modular type as required) including earth dollywith plastic laminated sheet top cover (cover plate with frame in case of modular)of approved make and colour including 1.5 sqmm multistranded FRLS copper conductor cable of green colour as continuous earth wire with lugs and accesseries and making good disturbed surfaces of walls/floor etc complete all as specified and directed for the followings :-(a)One light / fan point controlled by one way switch 77 (b)All as per Item No 76.00 here-in-above but for 5/6A socket outlet modular type on the same board complete all as specified and directed. 78 (b)All as per Item No 76.00 here-in-above but for 5/6A socket outlet modular type on the independent board complete all as specified and directed. 79 (c)All as per Item No 76.00 here-in-above but for point wiring 2.5 Sqmm on independent board for 15Amps socket outlet combined to modular typecomplete all as specified and directed. 80 S&F in replacement switch 5/6 amps piano type one one way complete all as specified and directed. 81 S&F in replacement socket outlet 6A -2/3 pin combined 2 module modular type complete all as specified and directed. 82 S&F in replacement of ceiling rose surface bakelite 63 x50mm three terminals completeall as specified and asdirected. 83 S & F in replacement of sub main wiring with PVC insulated, FRLS unsheathed two single core cable 1100 volts grade with stranded copper conductor of size 4.0 sqmm (Nominal area) drawn in and including concealed PVC conduit of suitable size as directed with and including one run of4.0 sqmm multistranded copper conductorsingle core PVC insulated, unsheathed cable of green colouras continuous earth wire including lugs etcconnected and tested complete all as specified and as directed.Note:(i) Two runs of 4.0 sqmm cable and one run of 4.0 sqmm cable of earth continuity conductor and conduit shall be a unit length. 84 S&F in replacement switch 15 amps piano type one one way complete all as specified and directed. 85 S&F in replacement socket outlet 16A-2/3 pin combined 2 module modular type complete all as specified and directed. 86 S & F single pole and neutral enclosure with a two pin and earth plug and socket with MCB 20 Amps capacity suitably fixed in a weather proof metal enclouser complete all as specified and directed.
