Tender For Spl Repair To Bldg No T-30, T-02 (Toilet), P-04 (Toilet), T-31 & P-01 (Toilet) In The Aor Of Age B/R-1 Under Ge Khumbathang; 1 Dismantling, wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, includingcover fillets. 2 Dismantling timber in fillets, rails, posts, rafters, purlins etc under 40 Sq cm in section in any position unframed work complete. 3 Dismantling of Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. 4 Dismantling structural steel work including doors, gates but excluding framed truss complete all as specified and directed. 5 M&L for Joist, channel, angle, or tee sections,Fe-410-W (GdeE-250) quality fixed independently framed, with or without connecting plates,in roof,wall etc all as specified. 6 Demolition of brick work or stone/ boulder/PCC block masonry, built in cement mortar including all quoins, pillars etc.complete all as specified 7 M&L for .Pre-cast cement concrete block masonry type C-11:3:6 (using 16mm graded stone aggregate) with solid blocksexc. 10 cm in width and setting in mortar 1:6 , complete all as specified and directed. 8 Taking down cement plaster on brick or concrete wall etc including racking out joints hocking for key scrubbing down with water etc. 9 M&L Rendering 15 mm thickon fair faces ofbrick work orconcrete surfaces in CM 1:6 is to be finished even and smooth (with out using extra cement) complete all as directed 10 Preparation of newly plastered surfaces and applying 3 coats of white wash over priming coat complete all as specified 11 Preparation of old decorated surfaces and applying 2 coats of white wash overpriming coat complete all as specified 12 M&L second class soft wood, plain fillets, square or rectangular in section of area exc 13 and n exc 25 Sqcm, clean sawn, secured with nailsor brads. 13 M&L second class soft wood, plain fillets, square or rectangular in section of area exc 3 and n exc 6 Sqcm, clean sawn, secured with nailsor brads. 14 M&L second class soft wood, plain fillets, square or rectangular in section of area n exc 3 Sqcm, clean sawn, secured with nailsor brads. 15 M&L 9mm thick, prelaminated particle board, interior grade, prelaminatedone side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work as in ceiling. 16 M&L 12 mm thick, prelaminated particle board, interior grade, prelaminatedone side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work as in walls. 17 Demolition of cement concrete in ground floors and paving n exc 15 cm thickness (below or above ground level) 18 Providing, cement concrete type C1 1:3:6 (using 20mm graded aggregate as in roof kerbs or mud stops and plinth protection rounded or chamfered on edges complete all as specified and directed. 19 M & L 40 mm thk cement conc. Type B-0 1:2:4(12.5mm graded crushed stone aggregate) as in sub base to floor complete. 20 M&L for machine cut kota stone slab flooring 20-25 mm thick over&including 15mm thick screed bed in CM 1:6laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete . 21 Taking down chowkats or frame with shutters ( without taking off shutter from frame ) n exc 1.50Sqm each. 22 Taking down chowkats or frame with shutters ( without taking off shutter from frame ) 1.50Sqm and n exc 4.0 Sqm each complete all as specified and directed. 23 S&F Pressed steel windows (hollow section) with side hung shutters including projecting type hinges with steel handle,and steel peg stay and 02 Nos tower bolt in each leaf complete with glazing bars dovetailed or welded complete all as specified and directed. 24 Ditto as per item No. 13but without glazing bars 25 Framed work such as grills grating etc with ends of bars shouldered and /or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk way railings framework of water tanks and similar work conforming to Fe 290 Gde-E-165. 26 Hacking out old broken glass (any thickness, size, quality) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads. 27 S&F Steel door including projecting type hinges, steel handle, complete,with glazing bars,locking arrangements, dovetailed or welded complete all as specified. 28 M & L 25 mm thk cement conc. Type B-0 1:2:4(12.5mm graded crushed stone aggregate) as in sub base to floor complete. 29 Supply and fix solid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and as directed by the Engineer-in-Charge 30 S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channelhaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification 31 S & F Mild steel barrel tower bolts,stove enamelled black with bright bolt and fixed (150mm length of bolt) 32 S & FAluminium alloy, anodised,sliding door bolt 250mm with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 33 S & F butt hinges heavy weight cold rolled stainless steel and fixed (100mm) 34 S & F Aluminium handles 150mm long, cast type,anodised 35 S&F 4 mm thick, sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane. 36 S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified. 37 S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws asspecified 38 M&L preparing old painted steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paintall asspecified & directed by the Engr-in-Charge. 39 M&L preparing new or previously untreatediron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint over a coat of red oxide primerall asspecified & directed by the Engr-in-Charge. 40 S&F inrepair 25 mm dia stainless steel curtain rods including end cap/ brackets,stops,rollers latest design etc and taking down old pipe complete all as specified and as directed by the Engineer-in-Charge. 41 Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing) and rubbish off the premises. 42 M&L for non skid ceramic tiles 7 to 8 mm thick area of each tiles exc 0.11 sqm but n.exc 0.18 sqm (coloured tiles) in floor, set & jointed in neat cement slurry, pointed,in white or coloured cement to match, over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. 43 M&L for glazed ceramic tiles coloured (350 x 250 x 7/450x350/300x450x7 to 8mm thick) on walls,incl highlighter tiles as if reqd set & jointed in neat cement slurry and pointed in white or coloured cement to matchover and including rendering 10mm thick on fair faces with CM (1:4) complete all as specified and directed. 44 Taking up or down steel tubing and connections 15mm bore of pipe, including cleaning for refixing or removal to storecomplete all as specified and as directed by the Engineer-in-Charge. 45 Taking up or down steel tubing and connections 20mm bore of pipe, including cleaning for refixing or removal to storecomplete all as specified and as directed by the Engineer-in-Charge. 46 Supply and fix steel water tubing 15 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors all as specified and directed. 47 All as per item above but 20mm dia 48 S&F 20mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for 49 S&Frepair Bib taps, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm dia and fixed 50 Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engr-In-Charge 51 M&L for reinforced cement concrete type B-1,1:2:4 (using 20mm graded aggregate) as in slabs supported on walls complete all as specified and directed 52 Formwork to soffits of suspendedslabs such as roof slabs, floorslabs, landings,sides of slab and similar work;not exceeding 200mm thick(Horizontal or sloping) complete all as specified and directed. 53 S&F Mild steel TMT bars10 mm diaand over., cut to length, bent to shape requiredincl crencking benddingwith mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips. 54 M&L for18 to 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars,cills,cooking platforms,counter top WHB including cuttingand like over and including in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade all as specified. 55 Supply and fix in repair vitreous china warecounter top wash hand basin incl waste fitting as per manufacturers specification complete and making good all connections in repairs complete all as directed by the Engr-in-Charge.Make: Parryware cat part No C0462 or equivalent as spproved by GE 56 S&F 32mm Dia PVC waste pipe for sinks or wash basines etc,. in repairs complete all as directed by the Engr-in-Charge. 57 S&F in repair 15 mm bore high neck piller cocks fancy type,cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred HOT or COLD with long screwed sunk and fly nuts.Make : Parryware cat part No T4264A1 or equivalent as approved by GE 58 S&F in repair Vitreous China squatting pan of pattern “Orissa pattern”, size 580x440 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern n including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor (excluding flushing cistern and flush pipe) 59 Supply and fix inrepair 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceablecistern complete as in repairs all as specified and directed. 60 S&F 15mm bore angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair. 61 Supply and fix PVC connection15 mm bore LDPE pipe 45cm long withbrass nuts and washers on both ends all asin repairs specified and directed. 62 S&F inrepair Towel Rail 600mm long 20mm dia,D type cromium plated, fixed with and including Chromium plated brass screws andwooden/plastic cleats. and fixed in repairs all as specified and directed. 63 Supply and fix inrepair 600mmx450mm bevelled edge mirror of selected quality glass, and fixed to wall withchromium plated screw studsall as specified and directed. 64 S &F 75 mm dia PVC (SWR) floor trap plain with grating doom with or without hole as directed including jointing to waste pipe fixed in solvent cement or cement concrete 1:2:4 type B1 all as specified and directed. 65 Demolition/Dismantling of drain pipes any type at any position complete all as specified and directed. 66 S &F 75mm bore PVC(SWR) Pipes single socketed in any length with rubber ring joints laid in trenches or in floor all as specified and directed. 67 S &F 110mm bore PVC(SWR) Pipes sinle socketed in any length with rubber ring joints laid in trenches or in floor all as specified and directed. 68 S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal 69 S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal 70 S &F 75mm bore PVC(SWR) bendall as specified and directed. 71 S &F110mm bore PVC(SWR) bend all as specified and directed. 72 S&F Aluminium anodised ventilator,louvered type with frame and frosted glass with complete accessoried all as specified and directed by Engr in charge 73 S&F Vitreous China Urinal, Half stall type, white (Including flush pipe 32 mm) complete all as specified and directed by Engineer in charge. 74 E/M Portion 75 Taking down carefully copper/ aluminium point wiring (light, fan, buzzer, socketor power) complete including fixture and fittings such as switches, ceilling roses, pendants , regulators, sockets light fitting etc for taking credit removing from site and making good disturbed surface etc. 76 Material and labourfor point wiring with 1.5 sqmm cable FRLSPVC insulated, unsheathed copper multistranded conductor, 1100 V grade of size 1.5sqmm including necessary termination board 1.5 Sqmm PVC insulated unsheathed FRLScopper conductor as earthingand connected to common earthing with PVCheavy duty casing caping/PVC conduit ISI marked as rquired at site along with all accessories and making good the disturbed surfaces of wall/ ceiling etcfor the following : - 77 One light point/ one fan point/ Bell Point controlled by one switch 78 One 3 pin socket outlet, 5 Amp independent 79 Supply in repair switch piano flush type single pole one way5 Amps all as specified 80 Supplyin repair switch socket combination multi purpose, 5 amp all as specified 81 S & Fin repairCeiling rose3 plates flush type 6 Amps,250 volts ACISI marked 82 All as per item No 2 above butfor point wiring for power point with 2.5 Sqmm FRLS PVC insulated unsheathed copper cable 1100 Volt grade drawn through and including PVC casing caping heavy dutyISI marked /heavy duty conduitISI marked as required at site alongwith accessories with 2.5 Sq mmFRLS PVC insulated unsheathed copper conductor cable as earthing and connected to common earth all as specified. 83 S & F in repair switch socket combination switch socket outlet 3 pin, 16 amp flush type 84 S&F in repair wall mounted LED light fitting 1x20 watts AC decorative box type with driver holder including LED tube light , energy efficient type 4 feet long including neccessary conection prewired and making connection with 3 core copper flexible cable of appropriate size from ceilling rose. 85 S&F LED security light fitting 35 watts 230 volts AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. 86 Supply and fix in repair sheet metal enclosure SPN DB 08 way,single phase 240 volts double door with 200 amp rated bus bar complete all as directed. 87 Supply and fix in repair sheet metal enclosure SPN DB 04 way,single phase 240 volts double door with 200 amp rated bus bar complete all as directed. 88 Supply and fix for miniature Circuit breaker (MCB) single pole and current carrying caoacity 5 to 32 Amp 240 volt C curve 10 KA in the MCB DB with connection testing and commissioning complete all as specified and directed. 89 Supply and fixfor miniature Circuit breaker (MCB) single pole & neutral240 volt C curve 10 KA 32 Amps capacity IP 20 in the MCB DB with connection testing and commissioning complete all as specified and directed. 90 Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth and getting it out for laying of cable / pole etc in hard/dense soil all as specified. 91 Returning, filling in, including spreading, leveling watering, and well ramming in layers not exc 25 cm in hard/dense soil all as directed. 92 Removing excavated material n.exc 50m and depositing where directed at a level exc. 1.5 cm above the starting point all as directed. 93 M&L for stone dust sand cushioning to UG cable laid in trenches all as specified and directed. 94 Supplying and laying unreinforced precast concrete cable cover, class HV, type 1 flat of size 250mm x150mm x 40mm placed perpendicular of the cable complete. 95 Supply laying and testing cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables heavy duty 1100 volts grade with stranded aluminium conductor of size 16 sqmm 2 core. 96 Material and labour earthing complete with galvanized steel earth plate 60 cm x 60cm x 6.0mm thick buried directly in ground vertically to a depth not less than2.25 mtr below ground level with top edge of the earth plate at a depth not less less than 1.5 mtr filled aroundwith 15 cm thick alternate layers of charcoal dust and salt and connected to earth leadwire 4mm dia (8 SWG) by means of bolt, nut and check nutsand washers of galvanized iron or steel and thimble and other ends of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15mm bore and watering pipe 20mm dia light grade with funnel and wiremesh, pcc 1:3:6 type C-1 in chambers RCC 1:2:4 type B-1 in pit cover reinforced with 8 mm dia deformed bars 15cm center to center both ways all as directed by Engr-In-Charge, complete all as shown in electric plate No 3 of MES SSR Part I 97 Deduct Credit for Demolished/Dismantled material Rs (-) 50,624.00 (Minus) as listed in Schedule A Sec-II (Credit Schedule)Note :Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the Contract Sum.
