Repairing And Renovation Of Nandanpur Amarkhana Primary School- 1 Page No. 114, Item No. 1Wood work in door and window frame fitted and fixed in position complete, including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron butt hinges and M.S. Clamps (the quantum should be corrected upto thre decimals) 2 P - 200 ITEM 02(a) Painting with best quality synthetic enamel paint of approved make and brand etc -(a) On timber or plastered surface with super gloss (hi - gloss)(iii) One coat (with any shade except white) 3 P - 141 ITEM 7Iron catch hook of approved quality fitted and fixed to shutter and chowkat(c) 10 mm dia x 300 mm long 4 Page No. 11, Item No. 10Stripping off worn out plaster and raking out joints of walls, ceiling etc. Upto any height and in any floor including removing rubbish within a level of 75m as directed(Details in M.B) 5 Page No. 16, Item No. 16125mm thick brick work with 1st class bricks in cement mortar (1:4) in ground floor 6 Page No. 189, Item No. 2Plaster (to wall, floor, ceilling etc.) with sand - cement - mortar including rounding off and chamferingcorners as directed and racking out joints including throuting, noising and drip cone, scaffolding / staging where necessary (Ground Floor) (excluding cost of chipping bror concrete surface)i) With (1:4) plaster inside wallc) 15mm thick 7 ii) With (1:4) plaster outside wallb) 20 mm thick 8 Page No. 192, Item No. 15Neat cement punning about 1.5 mm thick in wall, dado, window sills floor drain etc. (Note : cement 0.152 Cu.M. Per 100) (Detail measurement in M.B)(Details in M.B) 9 P - 194 ITEM 1White washing incuding cleaning and smoothening surface thoroughly. (c) Two coats 10 Page No. 104, Item No. 13M.S. Or W.I. Ornamental grill of approved design joints continuously welded with M.S., W.I. Flats and bars of windows; railing etc. Fitted and fixed with necessary screws etc complete as directed. Grill weighing above 10kg and upto 16 kg 11 Page No. 105, Item No. 16M.S gate of jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round/Square bars or angles. M.S sheet (not less than 14 gauge) gussets, cleats etc including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in-charge In Ground floor(Portion of locking arrangement inside the wall to be paid separately 12 Page No.100,Item No.2M.S. Structural works in roof trusses with tubular sections conforming to IS : 806 - 1968 & IS : 1161 - 1998 connected to one another with bracket, gusset cleats as per design, direction of engineer - in - charge complete including cutting to requisite size, fabrication with necessary metal are welding conforming to IS : 816 - 1969 & IS : 9595 using electrodes of approved make and brand conforming to IS : 814 - 2004, haulage hoisting and erection all complete.The rate include the cost of rolled steel section, consumables such as electrodes, gas and hire charges of all tools and plants and labour required for the work including all incidental charges such as electricity charges, labour insurance charges etc. i) For trusses spanning upto 12.00m 13 Page No. 81, Item No. 9Galranised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm dia J or L hook - bolts, limpet and bitumen washers and putty complete with 150 mm. End lap and one corrugation minimum side lap. (Payment to be made on area of finished work) (GCI sheet to be supplied by contractor)i) In roofc) with 0.60 mm thick sheet 14 Page No. 26, Item No. 10Ordinary Cement concrete (mix 1:1.5:3) witth graded stone chips( 20 mm normal size) excluding shuttering and re-inforcement if any, in ground floor as per relevent IS codesRiver bazree 15 Page No. 163,Item No. 12Ceilling of commercial ply as per design fitted and fixed complete (excluding the supporting frame work but including necessary wood battens of size 40 mm X 20 mm)ii) 6 mm thick, Local Sal 16 Page No. 64,Item No. 35 (b) (i)Supplying, fitting & fixing 1st quality ceramic tiles in walls and floors to match with the existing work & 4 nos of key stones (10 mm) fixed with white cement mixed with colouring oxide if required to match the colour of files including roughening of concrete surface if necessary or by synthetic adhesive & ghout materials etc.(A) FloorWith sand cement mortar (1:4) 20 mm thick and 2 mm thick cement slurry at back side of files using cement slurry @ 0.20 Kg./Sq.m.(B) Area of each file above 0.09 Sq.m.i) Coloured decorative 17 Page No. 48, Item No. 6Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (As necessary) and marble dust in proportion(1:2) incliding smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slury before flooring works using cement @1.75 Kg/Sq.M all complete including all materials and labourIn ground floor3 mm thick topping (High polishing grinding on this item is not permitted with ordinary cement(ii) 25 mm thick 18 Page No. 81,Item No. 10Galvanised Iron Sheet ridging fitted with necessary bolts, screws,washers e tc complete.(225mm end lapping)(A) 300mm Lapping each way(a) with 0.60 mm Sheet 19 GST @ 18% 20 L.W. Cess @ 1% 21 Contigency @ 3%
