Swing Equipment For School Game And Physical Fitness In School Gp Jirawal; Non BSR SURFING BOARD Providing, and fixing of Surf Board of size 910mm (Length) x 860mm (Width) x 1400mm. (Height) fabricated with a center pipe of 100mm Nominal Bore shall be made from c elass G.1. pipe. The sleeve pipe shall be made of 125mm OD seamless pipe with thickness of 5mm and bolted to main frame with M10 SS bolts. The bottom support shall be welded of M.S. plate of 250 mm & 10mm thickness. The handle frame of 25NB shall be made from c class G.I. pipe The paddle frame of 50NB shall be made from c class G.1. pipe supported with 70X8mm bend M.S. flat and can be replaceable. The foundation to be used for fixing should be a structure and shall be made from center pipe of G.I. of 80NB c class welded with M.S. round plate of 0250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Bushes shall be used of 70mm Outer Diameter with 5mm thickness. The footrests shall be made from Aluminum casting material of size 320mm X270mm X5mm. For support to footrest of 200mmX250mm with 3mm thickness M.S. Plate shall be used. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. The pins to be used shall be made up of 035 mm SAE 8620 bright material. The bearing shall be used are of 6007zz permanent lubricated sealed bearing of reputed brand (SKF/FAG) High tensile steel with galvanized nut bolts shall be used for assembly. The cerclips shall be used for assembly of A34. The powder coating shall be done with Pure Polyester powder of Ackzonoble or Berger with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, sent and pedal), and fixing of equipment etc. Non BSR CROSS TRAINER Providing and fixing of Cross trainer of size 1320mm (Length) x 600mm (Width) x 1750mm. (Height) fabricated with the main frame Pipes of 80NB shall be made of C Class G.1 and pipe with single bend pipe with 250mm radius. The bottom support of M.S. round plate of 0250 mm & 10mm thick. The Handle Frame shall be made up of 25NB C Class G.I. Pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.1. pipe of 80 NIB C class welded with M.S. round plate of 0250 mm & 10mm thick. Main pipe should be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm and CRC square pipes of 3mm thickness. To build structure bushes to be used which shall be made from M.S.seamless pipe of 60mm OD with 5 mm thickness. The footrests shall be made from Aluminum casting material of size 130 mm X 310mmX5mm thickness and mounted on M.S. Plate of Size 130mmx310mmx3mm thick. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. Pins to be used of Diameter 35mm, 25mm, and 17mm shall be made up from SAE 8620 bright. The Bearings shall be used of 6007zz 6205zz and 6203zz permanent lubricated sealed bearing of reputed brand (SKF/FAG). High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders of Ackzonoble or Berger Paints with 60 to 70 Micron thickness A16, A 24 min circlips shall be used for assembly. Bolt MSX16 mm and NY lock nut of M8 shall be made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc 2 Non BSR THI-CHESPINNER 2 WHKEL) Previding and fixing of The-Che spinter (2 Wheel) of size 700mm (Length) x 1000mm (Width) x 1280men (Height) fabricated with a pipe af 100010 shall be made up ef Class G1 pipe. The handle movement nound thane shall be made up from 25 NB C class Gl. pipe. The foundation should be used for fixing is a structure and shall be made from coster pipe of G.1. of 80 NB C class, selded with M.S. mund plate of 0250 mm & 10mm thick, Main pipe shall he supported with 25 mm X 25mm M.5. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of Ses thickness. Cloning Caps shall be made up of high quality Fiber reinforced Plastic married. The pins to be used shell be made up of 25 mm of SAE8620 bright material. The bearing shall be used of 6201 zz 6205aa permanest lubricated sealed bearing of reputed brand (SKF/FAG) High tensile 5.& nut bolts shall be used for assembly. Foundation caver Closing Cap shall be made tun FRP Material wih 0.7 mm thickness. The corclips used for assembly shall be of of A24 und A11. The nylon bush shall be used for handle knob. The powder coating shall be done with pure Polyester powders from Ackzonoble or Berger Paints with fil to 70 micran thickness. Bol M8X16 mm and Nylock nut of MI shall be made of SS 304 used on ayton cap mounted on pins to protect bearings and pins from min and dust, all complete as per drawing, design, directions and approval of Engineer-in-charge regording material, shape of equipment, colour (of metal, sent and pedal), and fiting of equipment e Non BSK SEATED PULLER Providing and fixing of Seated Puller of size 1900mm (Length) x 740mm (Width) 1920mm. (Height) fabricated with a center pipe is of 100NB shall be made from C Class G1. pipe. Bottom support of M.S. round plate of 0 250 am & 10mm thickness shall be welded. All linkages shall be made up of 25NB C class G1. pipe. The handle flume of 32NB C class G.1. pipe. The root frame of 32NB C class G.1. pipe, To build structure brushes to be used which shall be made from seamless pipe of 60mm O.D. and 5mm thickness as well as men diameter solid bar bush shall be used. The foundation should be nood for fixing is a structure and shall be made froen center pipe of G.1. of 40 NB C class welded with M.S. round plate of 0250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20nuns 40mm CRC square pipes of 3mm thickness. Foundation cover Closing Cap shall be made dom FRP Material. The seats and Back rests to he fined on the outer frames shell be made up of M.S. Sheet of size 330 mm X 300 numX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mes with no sharp edges. Closing Caps shall be made up of high quity Fiber reinforced Plastic material. Piss to be used of Diameter 25iten and 17mm. shall be made up from SAE 8620 bright material. The bearings shall be ined of 6205 and 6203zz permanent lubricated swoled bearing of reputed brand (SKFFAG) High temmile steel with galvanized nats & bols shall be uned for assembly. The onclips to be used for insembly are of A16 The powder coating shall be done with Pure Polyester powders of Ackzenoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directiers and approval of Engineer-is-change regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment esc Non BSR Non BSR LEG PRESS SIT UP BOARD DOUBLE Providing and fixing of Sit up Board double of size 1760mm (Length) x 1140mm (Width) x 660mm (Height) fabricated with the main frame of 25mm NB shall be made from C Class Gl pipe. FRP sheet of 3mm thickness shall be moulded on main frame. The remaining frame of the sit up board of 32mm NB shall be made from C class Gl pipe. The powder coating shall be done with Pure Polyester powder Ackzonoble or Berger Paints with 60 to 70 micron thickness. The foundation shoud be used for fixing is a structure and shall be made from center pipe of G.I. of 80 NB C class Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, colour
