Construction And Repair Of Civil Work For Gramsachivalay Building At Kandali .Tal. Junnar, Dist. Pune- 1 ITEM NO 1 : Excavation for foundation in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Manual Means (SSR Item No: 21.03) (PWD-CIVIL SSR) Item Spec: (Bd.A.1 Page One Number 259) 2 ITEM NO 2 : Excavation for foundation in hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling. ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m) By Manual Means (SSR Item No: 21.07) (PWD-CIVIL SSR) Item Spec: (Bd.A.1 Page No.259) 3 ITEM NO 3 : Excavation for foundation in Hard-rock by blasting including trimming and leveling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum watering, ramming etc. complete. (Lift from 1.5m To 3.0 m) By Mechanical Means(SSR Item No: 21.18) (PWD-CIVIL SSR) Item Spec: (Bd.A.5 Page One Number 259) 4 ITEM NO 4 : Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Non SCADA Item) (SSR Item No: 24.01) (PWD-CIVIL SSR) Item Spec: (Bd. E. 1 Page One Number 287) RA No.: 5 5 ITEM NO 5 : Providing and laying Cast in situ/leady Mix cement concrete M-25 of trap/granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork.cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Concrete Non Scada) (SSR Item No: 25.13) (PWD-CIVIL SSR) Item Spec: (Bd.F.3 Page One Number 298 and B.7, Page One Number39) RA No.: 15 6 ITEM NO 6 : Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Concrete Non Scada) (SSR Item No: 25.33) (PWD-CIVIL SSR) Item Spec: (Bd.F.5 Page One Number 300 and B-7, Page No 38.) RA No.: 16 7 ITEM NO 7 : Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Concrete Non Scada) (SSR Item No: 25.52) (PWD-CIVIL SSR) Item Spec: (Bd.F.6 Page One Number 300 and B.7, Page One Number39) RA No.: 17 8 ITEM NO8 : Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/quartzite/granite /grieiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with CM. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. Excluding einforcement, including cover block). (Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(Non SCADA Item) (SSR Item No: 26.26) (PWD-CIVIL SSR) Item Spec: (Bd. F. 13 Page One Number 305 1.5. 456 (2000) RA No.: 19 9 ITEM NO 9 : Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Concrete Non Scada) (SSR Item No: 25.72) (PWD-CIVIL SSR) Item Spec: (Bd.F.8 Page One Number 302 and B.7. Page One Number39) RA No.: 18 10 ITEM NO 10 : Providing and fixing in position TMTFE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.(SSR Item No: 26.33) (PWD-CIVIL SSR) Item Spec: (Bd.F.17. Page One Number 306) RA No.: 20 11 ITEM NO 11 : Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete(SSR Item No: 27.01) (PWD-CIVIL SSR) Item Spec: (Bd.G. 1 Page One Number 313) RA No.: 21 12 ITEM NO 12 : Filling in plinth and floors with approved excavated material in 15cm, to 20cm. Layers including watering and compacting etc. complete. (SSR Item No: 21.36) (PWD-CIVIL SSR) Item Spec: (Bd.A.10 Page One Number 2621) 13 ITEM NO 13 : Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. (SSR Item No: 21.37) (PWD-CIVIL SSR) Item Spec: (Bd.A.11 Page One Number 263) RA No.: 1 14 ITEM NO 14 : Providing saling using 80 mm size trap metal in 15 cm, layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.(SSR Item No: 21.40) (PWD-CIVIL SSR) Item Spec: (As directed by Engineer in charge.) RA No.: 2 15 ITEM NO 15 : Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete(SSR Item No: 27.05) (PWD-CIVIL SSR) Item Spec: (Bd.G.5 Page One Number 315) RA No.: 22 16 ITEM NO 16 : Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.5. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of mínimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (LS. 105211983). (SSR Item No: 39.26) (PWD-CIVIL SSR) Item Spec: (BD-T-57 Page One Number 511) 17 ITEM NO 17 : Providing and laying telephone black / Amba White /Cadburybrown/Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete (SSR Item No: 33.68) (PWD-CIVIL SSR) Item Spec: (As directed by Engineer-In-Charge) RA No.: 14 18 ITEM NO 18 : Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. (SSR Item No: 39.09) (PWD-CIVIL SSR) Item Spec: (BD-T-34 Page One Number 499) 19 ITEM NO 19 :Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete (SSR Item No: 39.58) (PWD-CIVIL SSR) Item Spec: (As directed by Engineer in charge.) 20 ITEM NO 20 : Providing and fixing in position. (as per 1.5.1868/1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.5 x 38.1 x 1.02 mm at weight 0.547 Kilogram/One Running frame bottom track section 61.85 x 31.75 x 1.2 mm at weight 0.695 Kilogram/One Running Metre. Top and side track section 61,85 x 31.75 x 1.3 mm at weight 0.659 Kilogram/One Running Metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.1 mm at weight 0.469 Kilogram/Running metre. And handle section 40 x18 x1.25 mm at weight 0.417 Kilogram/One Running Metre, and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nutsetc, complete. With colour Anodising without box (SSR Item No: 39.38) (PWD-CIVIL SSR) Item Spec: (As directed by Engineer in charge.) 21 ITEM NO21 : Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. (SSR Item No: 39.68) (PWD-CIVIL SSR) Item Spec: (As directed by Engineer in charge.) 22 ITEM NO 22 : Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/ One Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. (SSR Item No: 40.02) (PWD-CIVIL SSR) Item Spec: (Bd.U.1 Page One Number 537) 23 ITEM NO23 : Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. (SSR Item No: 32.01) (PWD-CIVIL SSR) Item Spec: (Bd.L.1 Page One Number 367) RA No.: 7 24 ITEM NO 24 : Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. SSR Item No: 32.03) (PWD-CIVIL SSR) Item Spec: (Bd. L.2 Page One Number 368) RA No.: 8 25 ITEM NO 25 : Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete (SSR Item No: 32.11) (PWD-CIVIL SSR) Item Spec: (Bd.L.7 Page One Number 369) RA No.: 9 26 ITEM NO 26 : Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. (SSR Item No: 33.40) (PWD-CIVIL SSR) Item Spec: (Bd.M. 12 Page One Number385) RA No.: 12 27 ITEM NO 27 : Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete (SSR Item No: 33.41) (PWD-CIVIL SSR) Item Spec: (Bd.M. 12 Page One Number385) RA No.: 13 28 ITEM NO 28 : Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding 1.5. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. (SSR Item No: 33.25) (PWD-CIVIL SSR) Item Spec: (Bd.M.13 Page One Number 386.) RA No.: 10 29 ITEM NO 29 : Providing and preparing kitchen otta up to 75 cm width, made up from 30 mm thick and 75 cm high vertical support for kadppa at 1 m. c/c of 25 mm thick both side polished kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia patti of 20 x 50 mm kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etc. complete. (SSR Item No: 33.38) (PWD-CIVIL SSR) Item Spec: (Bd.M.35C/Page One Number 393) RA No.: 11 30 ITEM NO 30 : Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32mm size of approved make including soil pipe, vent pipe up to outside face of wall, 100mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete. (SSR Item No: 42.86) (PWD-CIVIL SSR) Item Spec: (As directed by Engineer Incharge) 31 ITEM NO 31 : Providing and fixing 10 cm PVC nahani trap with grating etc. complete. (SSR Item No: 42.67) (PWD-CIVIL SSR) Item Spec: (BD.V 32 A page 551 and as directed by Engineer in charge) 32 ITEM NO 32 : Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. (SSR Item No: 42.52) (PWD-CIVIL SSR) Item Spec: (As directed by Engineer in charge.) 33 ITEM NO 33 : Providing and fixing P.V.C. Rain water pipes of 160mm outer diaMetre and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (SSR Item No: 42.85) (PWD-CIVIL SSR) Item Spec: (As directed by Engineer Incharge) 34 ITEM NO 34 : Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. (SSR Item No : 41.40) (PWD-CIVIL SSR) Item Spec (Bd.V.8 Page One Number 554) 35 ITEM NO 35 : Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange of approved make including necessary sockets/union nut etc. complete. (SSR Item No: 42.81) (PWD-CIVIL SSR) Item Spec: (As directed by Engineer in charge) 36 ITEM NO 36 : Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. (SSR Item No: 42.78) (PWD-CIVIL SSR) Item Spec: (As directed by Engineer in charge) RA No.: 6 37 ITEM NO 37 : Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.(SSR Item No: 42.55) (PWD-CIVIL SSR) Item Spec: (BD.V 5 page 551 and as directed by Engineer in charge) 38 ITEM NO 38 : Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.(SSR Item No: 42.56) (PWD-CIVIL SSR) Item Spec: (BD.V 5 page 551 and as directed by Engineer in charge) 39 ITEM NO 39 : Providing and laying in trenches 25 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (SSR Item No: 42.63) (PWD-CIVIL SSR) Item Spec: (BD.V 5 page 551 and as directed by Engineer in charge) 40 ITEM NO 40 : Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters(SSR Item No: 42.53) (PWD-CIVIL SSR) Item Spec: (As directed by engineer-in-charge.) 41 ITEM NO 41 : Providing and fixing white glazed earthenware Wash Hand Basin of 45cm x 30cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including PVC. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. SSR Item No 41.64) (PWD-CIVIL SSR) Item Spec: (Bd.V.30 Page One Number 5651 RA No.: 4 42 ITEM NO 42 : Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete. (SSR Item No: 42.12) (PWD-CIVIL SSR) Item Spec: (Bd.V.43. Page One Number 574) RA No.: 23 43 ITEM NO. 43 : Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting. fabricating, hoisting, erecting fixing in position, Making riveted! bolted/welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. (SSR Item No: 23.04) (PWD-CIVIL SSR) Item Spec: (Bd.C.8 Page One Number 278) RA No.: 3 44 ITEM NO 44 : Providing and fixing colour coated Zincalume (R) AZ150 (min 150 gms/sq.mt. total on each side I profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT), Hi-strength steel with min 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND (R) steel quality super durable polyester paint coat with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min, fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/One Square Metre) (SSR Item No: 38.34) (PWD-CIVIL SSR) Item Spec: (As directed by Engineer in charge. ) 45 TEM NO 45 : Providing and fixing 900mm high 5.5.304 Grade Stainless steel ralling with 40mm diametre and 1.5mm thick at top, 40mm diaMetre and 1.5mm thick vertical supports spaced at 1.5m tenter to center and 8mm thick toughened glass including labricating fixtures, errecting necessary welding, grinding. inishing, buffing to stainless steel pipe etc. complete SSR Item No: 40.07) (PWD-CIVIL SSR) Item Spec: (As directed by Engineer Incharge) 46 ITEM NO 46 : Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. (SSR Item No: 31.09) (PWD-CIVIL SSR) Item Spec: (As directed by Engineer in charge) 47 ITEM NO 47 : Providing and fixing heavy duty inter locking concrete RUBBER NOULD GLOSSY PAVING BLOCKS of 60 millimetre thickness of having a strength of 400 Kilogram/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 milliMetre thick including striking joints and cleaning etc. complete. (using 100% crushed sand (SSR Item No: 33.53) (PWD-CIVIL SSR) Item Spec: (Bd. M-12 page One Number 385) RA No.: 24 48 ΠΕΜ ΝΟ 48 : Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning preparing the plaster surface, applying primer coat scaffolding if necessary, and watering the surface for two days etc complete.(SSR Item No: 35.25) (PWD-CIVIL SSR) Item Spec: (As directed by Engineer in charge.) 49 ITEM NO 49 : Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete. (SSR Item No: 35.23) (PWD-CIVIL SSR) Item Spec: (As directed by Engineer in charge.) 50 ITEM NO 50 : Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc, having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border/messages/symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etccomplete. Spec. No. As directed by Engineer in Charge (SSR Item No: 6.36) (PWD-CIVIL SSR) Item Spec: (MORTH 801 ) 51 ITEM NO 51 :BRICKS. 1) Water Absorption (Set of 5 Bricks), Compressive Strength(Set of 5 Bricks), Efflorescence (Set of 5 Bricks) (SSR Item No: 99.13) (PWD-CIVIL SSR) Item Spec: () 52 ITEM NO 52 :CONCRETE. 1)Compressive Strength OF C.C. Cube (Set of 3 cubes). (SSR Item No: 99.19) (PWD-CIVIL SSR) Item Spec: () ) 53 ITEM NO 52 :CONCRETE PAVING BLOCKS. 1) Compressive Strength, Water Absorption, (Set of 8 Blocks) (SSR Item No: 99.26) (PWD-CIVIL SSR) Item Spec: () 54 ITEM NO 54 : MORTOR. 1) Compressive Strength. (Set of 3 Cubes) (SSR Item No: 99.27) (PWD-CIVIL SSR) Item Spec: () 55 ITEM NO 55 : STEEL BAR TESTING.1) Upto 16 mm (Set of 3 Bars) (SSR Item No: 99.72) (PWD-CIVIL SSR) Item Spec: () 56 ITEM NO. 56 : 1 Royalty For Natural Sand - Screened (for plaster work only) 57 ITEM NO: 2 Royalty For Rubble stone excluding royalty 58 ITEM NO: 3 Royalty For Soft Murum
