|
| 1 | Item No :-1 Cleaing grass and removal of Rubbish upto a distance of 50 m outside the periphery of the area as directed with all lead and lifts as directed by Engineer-In-Charge |
| 2 | Item No 2:-Excavation in Soft Stratancluding boulders upto 0.6 m diameter for canel, seating of embakment, filter belt, catch water drains etc and placing the excavated stuff neatly in dump area or for the formation of the service road / embakment including cost of all materials, mechinery , labour , dressing bed and sides to required level and profile etc complete with all lead and lifts as directed by Engineer-In-Charge |
| 3 | Item No 3:- Excavation in Hard Strataof all toughness by blasting including boulders above 0.6 m dia.(0.113Cum) minimising damage to side slopes of excavation in water prism area by adopting any one or combination of line drilling / pre-splitting / smooth blasting techniques and placing the excavated rock neatly in approved dump areaincluding cost of all materials, mechinery , labour , dressing bed and sides to required level and profile etc complete with all lead and lifts as directed by Engineer-In-Charge |
| 4 | Item No 4:- Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite /graded metal for foundation and bedding with Concrete Mixer including placing, compacting, curing etc. complete with an initial lead of 1 k m & all lifts etc complete as directed ( For body weir / Peir / abutment / wing wall ) with all lead and lifts as directed by Engineer-In-Charge |
| 5 | Item No 5:- Providing and Fixing TMT -FE -500 bar rainforcementof various diameter for RCC Work, pipe, caps, footing, foundation, slab beam, column, canopies, stair case , chhaja, lintels, copings, as per detail drawing and schedule, including cutting, bending, hooking, binding with wire, tack welding and supporting as required asper standard specification with all leads & liftsetc complete as directed by the Engineer-In Charge |
| 6 | Item no 6:- Straight needles K. T. Weir gate manufacturing with QAP and fabrication of K.T. Weir needles gets stright type size 2.15x0.5 m -94 kg weight as per relevent indian standered with all material mild steel conferming to IS 2062 rubber seal conferming to IS 4623 welding electrods AWSE C013for general weld joints it includes all metarials labour charges machinery charges 1km lead charges of transportation loading and unloading charges get parts at site inspaction an Quality control charges sand blasting, painting with one coat of zinc rich primer on dry film to give total dry film thickness 70+-5 micron and two cotes of sloventless coal tar epoxy paint applied to givea minimum dry film thickness of 150+-5 micron per coat as per IS 14177 with all lead and lifts as directed by Engineer-In-Charge |
| 7 | Item No 7:- Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. with all lead and lifts as directed by Engineer-In-Charge |
| 8 | Item No 8:- Backfillinguptogroundlevelbehindthe canalstructuresetc.completewithsuitablematerialof approvedqualityinlayersnotexceeding20cmwithout disturbing the structure etc. complete as directed.with all lead and lifts as directed by Engineer-In-Charge |
| 9 | Item no 9 :- Drilling holes for inserting anchor bars in foundation inclding cleaning flushing the hole etc complete with all lead and lifts as directed by Engineer-In-Charge |
| 10 | tem No 10:-Providing and fixing canal information board of 1.2 x 0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35 X 35 X 3 mm with cross bracing of size 25 X 25 X 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enamelled bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows coated with non pealable crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50X50X5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 X 60 X 75 cm as directed by engineer-in-charge. |
| 11 | tem No 11-Fixing of MS Needls in Weri opening after offset of mansoon for storage of water from post mansoonriver flow etc complete with all lead and lifts as directed by Engineer-In-Charge |
