|
| 1 | Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil. complete all as specified and directed. |
| 3 | M & L for Cement concrete type D2 1:4:8 using 40mm graded stone aggregate in foundations, filling and mass concrete. complete all as specified and directed. |
| 4 | M & L for Pre-cast cement concrete type B1 1 : 3 : 6 block masonry with solid blocks, exc. 10 cm in width and setting in mortar (CM 1:6) complete all as specified and directed. |
| 5 | M & L for 40 mm thick Cement Concrete M-15 Nominal Mix (using 12.5 mm graded stone aggregate) as in damp proof course (DPC) to horizontal or vertical surfaces including necessary form work and including supply and mixing of water proofing compound as per manufacturer’s instructions complete all as specified and directed by Engr-in-Charge. |
| 6 | M&L for Hard core of gauge n exc 63mm thick of broken boulder spread leveling watering ramming to true surface complete all as specified and directed by Engr-in-Charge. |
| 7 | M&L for 75mm thick P.C.C 1:4:8 type D-2 using 40mm graded stone aggregate in sub base of floor complete all as specified and directed by Engr-in-Charge. |
| 8 | M & L for 25 mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in flooring including finishing cement concrete rough surface with out using extra cement complete all as specified and directed by Engr-in-Charge. |
| 9 | M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floor laid over and including 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surface of tile complete all as specified and directed by Engr-in-Charge. |
| 10 | M & L for Glazed ceramic coloured tiles of7 mm thick as on vertical surfaces such as skirting, dados and rises to steps etc. over and including 10mm thick backing coat in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed by Engr-in-Charge. |
| 11 | M&L For RCC 1:2:4 type B-1, ( using 20 mm graded stone aggregate) as inbeams, cantilevers, bed block, bressummers, lintels over 1.5m span , including necessary form work etc complete all as specified and as directed by Engineer-In-Charge. |
| 12 | M & L for 10 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing the surface even and smoth without using extra cement complete all as specified and directed. |
| 13 | M&L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surface and finishing the surface even and smooth without using extra cement secified and directed by Engr-in-charge. |
| 14 | M & L for preparation of newly plastered or un-plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. |
| 15 | M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed. |
| 16 | Returning filling in including speading,leveling ,watering and well ramming in layers not exc 25 cm in soils complete all as specified and directed by Engr-in-Charge. |
| 17 | Removing of excavated Soil n exc 50m and depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and directed by Engr-in-Charge. |
| 18 | M&L for 75 mm thick PCC 1:3:6 type C1 in plinth protection finishing even and smooth without using extra cement including providing joints n. exc. 2.00 m in length & filling the joints with bitumastic filling complete all as specified and directed by Engr-in-Charge. |
| 19 | M & L for precast cementconcrete M-15 Nominal Mix (1:2:4) (using 20 mm graded stone aggregate), as in lintels upto 1.5 m clear span, cills, steps,seismic and other similar bands, plinth course, string courses, lacinng courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 20 | M & L for providing pre-cast cement concrete landing, cover slabs (for man holes etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate and setting in cement mortar 1:6 complete all as specified and directed. |
| 21 | M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 22 | M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 23 | M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, bands, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed. |
| 24 | S&F Prepainted galvanume aluminium zine coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strenght 550Mpa in roof coverings fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. |
| 25 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing of Fe 410W (Gde-E-250) etc (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. |
| 26 | S&F For Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel,complete all as specified and directed by engr in charge. |
| 27 | S&F For 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed by engr in charge. |
| 28 | S&F Galvanised Iron snap grid frame work for suspended false ceiling ,size of grid 605mm X605mm with hangers 6mm dia G.I. (upto 1200mm length ) adjusting level,fixed to Purline/rafter complete all as specified and directed by engr in charge. |
| 29 | S&FNon asbestos fiber cement designer building board 6mm thick ,fixed to aluminium or MS galvanised snap grid frame work with screw in ceiling complete all as specified and directed by engr in charge. |
| 30 | Material & labour for two coats of synthetic enamelled paint over a coat of red oxide on new steel surfacesexc 10cm width or girth including preparation of surfaces.complete all as specified and directed by Engr In Charge. |
| 31 | S & F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like includingcaps,bases, splices etc. built up from twoormore beam or channel sections or angles with plates, including all lattice bars,stiffeners, gusset plates, etc.Fe-410-W(gde-E-250) quality A complete all as specified and directed. |
| 32 | S&F Rotational moulded polythylene water storage tanks triple layer of capacity 1000 ltr (Cylindrical vertical with closed top) hoisted and fixed in position all as specified. |
| 33 | S&F 20mm bore ballvalve high pressure of PTMT with epoxy coated alluminium rod and high density plastic ball secrewed for iron pipe and fixed. (Minimum wt 15 mm - 142 gms/20 mm - 210 gms) |
| 34 | S&F15 mm dia of pipe Gun-metal, globe or gate valvees with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified and directed by Engr In Charge. |
| 35 | S&F20 mm dia of pipe Gun-metal, globe or gate valvees with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified and directed by Engr In Charge. |
| 36 | S&F 15mm bore Galvanised steel tubes,\"medium grade\"with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr In Charge.. |
| 37 | M & L for Cutting chases on pcc block / slab wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water complete all as specified and directed by engr in charge.tubing or concealed conduit wiring, etc., and making good, cutting notexc 10 cm girth complete all as specified and as directed by Engineer-In-Charge. |
| 38 | S&F 20mm bore Galvanised steel tubes,\"medium grade\"with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr In Charge.. |
| 39 | S & F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device vitrious Chaina pedestal pattern WC incl PVC seat cover and flush pipe etc complete all as specified and directed. |
| 40 | S&F 10 ltr capacity PVC valveless , syphonic action type flushing cistern, low level, white, with inlet ball valve, float and handle including brackeet and 32mm dia flush pipe of polyethylene of low or high density for low level cistern complete all as specified and directed. |
| 41 | S&Fvitreous china wash basin , white , flat back, size 630x450mm excluding taps, waste chain and plug and porcelain stopper but including brackets , waste coupling32 mm borewith padestrial complete all as specified and directed. |
| 42 | S&F vitreous china urinal half stall type flat back size ofwhite with grating and union for discharge pipe including chromium plated water spreader , connection pipe and discharge down pipe complete all as specified . |
| 43 | S & FSheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed. |
| 44 | S&Fbib taps 15mm diafancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed. complete all as specified and directed by Engr In Charge. |
| 45 | S&Fbrass CP Stop cock/ Angle cock 15mm fancy type choromium plated etc, complete all as specified and as directed. |
| 46 | Supply & fixing 15mm Brass CP Mixture for mixing Hot & Colt waterscrewed down for iron pipe and fixed for WHB complete all as specified and directed by Engr In Charge. |
| 47 | S&F for waste coupling of PTMT for 32 mm bore dia of discharge pipe (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed by Engr In Charge |
| 48 | S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 49 | S&F cast iron floor trap 75mm out let dia with grating including jointing to waste pipefixed in cement concrete complete all as specified and directed by Engr-in-Charge. |
| 50 | M & L for Gully traps salt glazed stoneware (SGSW)square or round mouthed type \"P\" of size 180x100mmfor drain pipes complete all as specified and directed. |
| 51 | S & F 75 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors complete all as specified and directed. |
| 52 | S & F 110 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints incl hunching & bunching, laid in tranches or in floors complete all as specified and directed. |
| 53 | S&F110mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr in Charge. |
| 54 | S & F75 mm diabore PVC (SWR) bends any radius complete all as specified and directed by Engr in Charge. |
| 55 | S & F110 mm diabore PVC (SWR) bends any radius complete all as specified and directed by Engr in Charge. |
| 56 | S & F110 mm diabore PVC (SWR) junction single \"T\" equal or unequal complete all as specified and directed by Engr in Charge. |
| 57 | S & F PVC (SWR) 110 mm borevent cowl complete all as specified and directed by Engr in Charge. |
| 58 | S&F soap dish vitreous china white, approximate size 160x160x90mm embedded in the wall complete all as specified and directed by Engr in Charge. |
| 59 | S & F of 20 mm dia Aluminium anodised tubular towel 600 mm longincluding one pair of fixing brackets complete all as specified and directed. |
| 60 | S & F solid PVC doorframe of size 50mm x 47mm made out of5 mm plain colour PVC sheet reinforced with M.S. square tubeetc all as specified and as directed. |
| 61 | S & Ffactory made solid PVC moulded door shutter, 30 mm thick 2mm thick 3D wood grain Moulded PVC sheet polyurethane painted on the front face & 2mm plain colour PVC sheet on back face complete all as specified and as directed. |
| 62 | S&F butt hinges, medium weight, cold rolled mild steel, size 100mm complete all as specified and directed by Engr In Charge. |
| 63 | S&F MS sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, 250mm length.complete all as specified and directed by Engr In Charge. |
| 64 | S&F 150mm barrel tower bolts, stove enamelled black, with bright bolt.complete all as specified and directed by Engr In Charge. |
| 65 | S&F MS pressed handles, oval type, stove enamelled black size of 125mm complete all as specified and directed by Engr In Charge. |
| 66 | S & F in repairs 600mm X 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. |
| 67 | S & F toilet paper holder , vitreous china box type fixed to wall with chromium plated brass screws. |
| 68 | S & F for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 69 | Provn ofSeptic tank of capacity 10 user all as specified as shown on Drg. No. STD-1320(C)1/3 to 3/3 |
| 70 | M&L for soakage pit 3m bottom dia and 3 m deep inclexcavation and earth work and loose filling with broken stone all as sfd and shown on drg. No. STD-1173(C) 1R/2 to 2/2 complete all as specified and directed. |
| 71 | M&L for 75 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing & finished the surface even & fair all as specified. |
| 72 | M & L for 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes finished even and rough complete all as specified and directed. |
| 73 | M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement and pigment set and jointed in neat cement slurry and pointed in white or coloured cementcomplete all as specified and directed. |
| 74 | M & L for providing cement concrete cas in situ 1:2:4, type B1 (using 20mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edge including use of formwork complete all as specified and directed by engr in charge. |
| 75 | M&L for point wiring using approved colour coding as per IS with using approved colour coding as per IS 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulatedstranded copper conductor cable for continuous earthing in & incl PVC Casing and capingwith accessories having ISI mark fixed on wall surfaces / ceilingincluding provision PVC Box on top for fixing switches sockets etc. all as specified for one light point/ fan /Bell point controlled by one switch complete all as specified and directed by Engineer-in-Charge. |
| 76 | M&L for point wiring using approved colour coding as per IS with using approved colour coding as per IS 2.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated and unsheathed type alongwith 2.5 Sqmm PVC insulatedstranded copper conductor cable for continuous earthing in & incl PVC Casing and capingwith accessories having ISI mark fixed on wall surfaces / ceilingincluding provision PVC Box on top for fixing switches sockets etc. all as specified for one light point/ fan /Bell point controlled by one switch complete all as specified and directed by Engineer-in-Charge. |
| 77 | Supply and fixing of piano type switch 15 amp, 230 volt, flush button single pole one way complete all as per specified and directed by Engineer-in-Charge. |
| 78 | Supply & fixing of socket outlet 3 pin 15 amp 2-in-1 230 volt flush type complete all as per specified and directed by Engineer-in-Charge. |
| 79 | Supply & fixing of switch piano type 5 amp, 230 volt, flush button single pole one way complete all as per specified and directed by Engineer-in-Charge. |
| 80 | M&L Ceiling rose, 3 terminal with ISI markall as specified and directed by Engr-In-Charge. |
| 81 | Supply andfixing surface & wall mounted LED 20W tube light fitting batten 4 feet, mirrorlite slim type with extruded aluminium housing alongwith 20W LED lamp PC body with all accessories complete all as specified and directed by Engr in Charge. |
| 82 | Material and labour forlamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr in Charge. |
| 83 | S&F 9 watts LED backup lamp of 4 hours backup, with auto switch on machanism in case of power failure, works as regular 9W lamp in normal mode and 4W lamp in backup mode complete all as specified and directed by Engr in Charge. |
| 84 | S&F bulk head light with 10 W LED Lamp complete all as specified and directed by Engr in Charge. |
| 85 | S&F for PVC exhaust AC, Single phase 300mm sweep 1400 RPM, with louvre complete all as specified and directed by Engr in Charge. |
| 86 | Supply and fixing of sheet metal enclosure double door for DBs single pole and neutral for 12 way 240 volt complete all as specified and directed by Engineer-in-Charge. |
| 87 | S&F SPN 32 Amp,10 KA, complete all as specified and directed by Engineer-in-Charge. |
| 88 | S&F MCB SP 6 Amp to 20 Amp, 10 KA, complete all as specified and directed by Engineer-in-Charge. |
| 89 | Supply & laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with two core PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheath 6 sqmm nominal cross section in service connection and overall PVC sheathed in service connection complete all as specified and directed by Engr in Charge. |
| 90 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanised earth wire of 4 mm dia by means of bolts, nuts, hook nuts and washers of galvanization of steel all as shown in electrical plate no 3 connected to earthing testing point all as specified or indicated including testing of completions.. |
| 91 | S&F and connection of GI pipe of size 25 mm bore dia, medium grade incl GI fittings and fixed complete all as specified and directed by Engr in Charge. |
| 92 | S&F of Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed size 25 mm dia incl connection and testing complete all as specified and directed by Engr in Charge. |
| 93 | M&L for cutting of existing steel tubing of size 25mm dia for alteration or additions, done in position without taking down complete all as specified and directed by Engr in Charge.Note: Each cut shall be measured |
| 94 | S&F of wiring for circuit/submain wiring in PVC casing caping alongwith earth wire with the 3X2.5 Sqmm sizes of FR is PVC insulated copper conductor, single core cable in PVC Conduit, surface/recessed as required and complete all as specified and directed by Engr in Charge. |
| 95 | Supply, Installation, Testing and Commissioningof silent Diesel Engine capacity 160 KVA , 6 cylinder 7.2 ltrs liquid cooled turbocharged intercooled, developing 199 BHP at 1500 RPM. This is electric start , compression ignition, 4 stroke engine designed to run continuously @ 1500 RPM.The Diesel engine conforms to present CPCB IV + norms. The DG set comprise of following:- 1. Radiator with Fan2. Electric starter motor with soft starting system3. Electronic Governor (G3 as per ISO 8528 Part V class governor)4. Battery charging alternator5. Dry type Air cleaner with service indicator6. CRDI System7. Lube Oil & Fuel filter8. DOC, SCR9. First fill of lube oil & coolant10. IoT Remote Monitoring System11. 1 x 12 V DC Battery (120AH) including Battery Copper Lead. |
| 96 | SAILENT FEATURES OF DG SETThe DG Set is of compact size with Manual and Automatic starting system.IoT remote Monotring system will be provided as standard feature.Sound Proof, weather Proof enclosure.Low vibration, best in class fuel consumption with electronic fuel injection system.Class G3 Governing in its range, which gives better accuracy in decreasing the speed drop in transient and lowering the recovery time of the speed.Low cost of service & spare.Low operation cost.confirms to statutory Govt CPCB IV + emmission & noise level norms.The enclosure is of modular construction with the provision to assemble and dismantle easily.The sheet metal components are pre- treated and are polyester based powder coated (inside as well as outside) for long life.All Nuts-bolts, hardware are stainless steel for long life.Battery is provide in tray inside the enclosure.Door are gasketed with high quality EPDN gaskets to avoid leakage of sound.Optimised EATS (Exhaust after Treatment System) is provided to control emission & Exhaust noise.Specially designed sound attenuators are provided to control sound at air entry & exit points inside the enclosure.To make the system vibration free, engine and alternator are mounted on specially designed anti vibration pads mounted on base fram.The enclosure is designed and layout of the equipment is such that there is easy access to all serviceable parts.Adequate ventilation is provided to meet air requirement for combustion & heat removal. |
| 97 | FOLLOWING SAFETY FEATURES OF DG SET1. High water temperature2. Low lube oil pressure3. Emergency stop push button outside the enclosure.4. DOC , SCR5. Cold Start feature (Optional)6. Specially designed Standard Control Panel is mounted inside enclosure itself.7. In-built draw in type fuel tank of of 388 ltr. capacity.8. With UV resistant powder coating, can withstand extreme environments9.The walls of the enclosure are insulated with the fire-retardant & noise absorbent foam/rockwool so as to comply with the noise level of 75 dB(A) at distance of 1 mtr in open free field environment as per ISO 8528 part 10 specified by ministry of Environment & Forest.10.Fluid drains for lube oil and fuel. |
| 98 | ALTERNATOR:Alternator capacity of 160 kVA DG Set, suitable for continuous operation rated at 1500 RPM 415 Volt, 0.80PF, 50.00Hz, Three Phase in SPDP enclosure, self-excited, self-regulated Brush less, floor mounted. The alternator conforms to IS:4722,BS EN 60034-1 & will be suitable for tropical condition.ACOUSTIC ENLOSURE:The Enclosure is of modular construction.1. Durable industrial locking system is provided on doors.2. The sheet metal components are pre-treated and are Polyester based powder coated (inside as well as outside) for long life.3. Specially designed sound attenuators are provided to control sound at air entry & exit points inside the enclosure.4. In - build draw in type fuel tank of 388 ltr. capacity.5.The walls of enclosure are insulated with the fire-retardant & noise absorbent foam/rockwool so as to comply with the noise level of 75dB(A) at distance of 1mtr. in open free field environment as per ISO 8528 part 10 specified by ministry of Environment & Forest. |
| 99 | DG CONTROL PANEL WITH GENSET CONTROLLER:The Automatic and Manual Control Panel is manufactured with 16/18 gauge CRCA sheet and is powder coated for a weather-proof and long lasting finish. The Control Panel consists of Microprocessor based genset controller, MCCB of suitable rating, Key Switch, Push Button (starter),LED: Battery Charging alternator fail indication, Current Transformer, nstrument fuses. The genset controller has all the basic safeties and protections.Note :-(i) The contractor shall submit the Design of DG Set Engine, Alternator, Control Panel ,Acoustic Enlosure &SLD Digram of six copies from OEM within 02 weeks from the Date of Commencement of tender for final approval from accepting officer before executation of work.(ii)The Engine, Alternator shall be factory assembled in premises of OEM .(iii) The quoted rate shall be deemed to be inclusive of first filling of lubricant oil.(iv) The quoted rate shall be deemed to be inclusive of 12 hours test run at site including FOL, all arangements are to be provided by the contractor as per the latest BS /IS specifiecation and as directed by GE.The cost of the same shall be deemed to included in the rate quoted in tender. |
| 100 | (v) PCC foundation for mounting of DG Set not less 30cm from the GL shall be done as per manufacture design.The cost of the same shall deemed to be included in the above rates.(vi) The contractor shall provide Catalogue operation and maintenace manual, spare parts list, overhauling manual. |
| 101 | Supply, install, testing and commissioning LT cubical Panel of outdoor type factory made dust/vermin proof made out of CRCA sheet 3.15 mm thick CPRI approved duly powder coated having opening and locking arrangementboth in front and rear side(independent door for each item on front side) mounted on 4 Nos angle iron 50x50x6 mm, 45 cm long embedded in PCC 1:3:6 type C2 complete with aluminium bus bar ofrating 1.5 times the rated capacity of incomer, IP 65 protection, suitable cable gland for incomming and outgoing cables with lugs and connections etc required nuts ,bolts and washer incl complete control wiring with suitable size PVC copper conductor cable and provn of cable lugs etc. Including provision of following accessories/eqpt incl cable gland etc and suitable for fixing of under mentioned items:-(Main Panel) |
| 102 | Incoming(a) Onload change over 320 Amps 415 v 4 pole. - 01 No(b) MCCB Adjustable thermal and fixed magnetic 4Pole 320 A 36 KA - 01 No(c) Digital Voltmeter 0 to 500 Volt -01 No(d) Digital Ammeter 0 to 400 Amps with CTs and selector switch - 01 No(e) LED Phase Indication lamp (RYB) - 01 SetOutgoing(a) MCCB Adjustable thermal and fixed magnetic 4Pole 160A 27 KA - 01 No(b) MCCB Adjustable thermal and fixed magnetic 4Pole 100 A 27 KA -01 No(c) MCCB Adjustable thermal and fixed magnetic 4Pole 63A 25 KA - 01 No(d)Spare Space |
| 103 | Supply, laying and testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100volts grade, cross-sectional area of 95 sq mm 3.5 core all as specified and directed by Engr-in-Charge. |
| 104 | M & L for Earthing complete with galvanised steel earth plate electrode 600x600x6.0mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised strip of size 32 x 6 mm earth continuity coductor by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR-I 2009, connected to main switch board all as specified. Necessary excavation, earthwork, PCC works and CI earth pit cover with watering pipe 20 mm dia GI Pipe medium grade, funnel with wire mesh and lugs, and 40 mm dia GI Pipe medium grade for protection of earthstrip complete all as specified and directed by Engineer - in - Charge. |
| 105 | Supplying and laying synthetic Rubber insulated mats 2 mm thick for voltage upto 3.3 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m complete all as specified and directed by Engr in Charge. |
| 106 | M&L for laying dry bricks old size with subclass \"B\" made of burnt clay best quality locally available with permissible tolerance, laid straight trench for protection of cable complete all as specified and directed by Engr in Charge. |
| 107 | Returning and filling in two parts (i) using riddled soil obtained from excavated soil upto depth of 30 cm (8 cm below cable and remaining above cable for cushioning of cable(ii) refilling the trench of remaining depth with normal excavated soil complete all as specified and directed by Engr in Charge. Note- Excavated soil shall be riddled by using sieve to separate composite particles etc and refilling in trenches as in cable cushioning. |
| 108 | Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings complete all as specified and as directed by Engineer-In-Charge. |
| 109 | Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) complete all as specified and as directed by Engineer-In-Charge. |
| 110 | Taking down chowkats or frames exc 1.5 sqm but not exceeding 4 sqm each but with shutter (without taking off shutter from the frame) and removing to store complete all as specified and directed by Engr-in-charge. |
| 111 | Demolition of block masonary or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and as directed by Engineer-In-Charge. |
| 112 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-In-Charge. |
| 113 | M&L For RCC 1:2:4 type B-1, ( using 20 mm graded stone aggregate) as inbeams, cantilevers, bed block, bressummers, lintels over 1.5m span, including necessary form work etc . Complete al as specified and as directed. |
| 114 | M&L For Reinforced cement concrete Nominal Mix 1:1.5:3 Type A 1(using 20 mm graded stone aggregates) in foundations, footing, plinth beams, bases for columns and mass concrete(reinforcement to be measured separately) complete all as specified & directed. |
| 115 | All are as per item no 108 but in column complete all as specified & directed. |
| 116 | M & L for Reinforced Cement Concrete Nominal Mix 1:1.5:3 Type A 1(using 20 mm graded stone aggregate) in Chajjas and the like complete all as specified & directed. |
| 117 | M & L Use and waste of Form work to sides of concrete foundations, footings, bases of columns, sides & soffits of foundation and plinth beams and similar work for rough finished flat surfaces of concretecomplete all as specified & directed. |
| 118 | All as per item no 111 above but sides of square column fair finished surface complete all as specified & directed. |
| 119 | M&L 15mm thick cement plastering on concrete surfacesin CM (1:4) finishing surfaces even and smooth without using extra cementcomplete all as specified and as directed. |
| 120 | M&L rendering 15mm thick on Concrete surfaces in CM 1:6 finished even and smooth without using extra cement etc. complete all as specified and directed. |
| 121 | S&F pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,complete all as specified & directed. |
| 122 | S& fixed factory made plain framed panelled shutters 35mm thick of 2nd class hard wood (any number of panels) with panels of timber flat on both sides feather edges or panel of 9mm BWP commercial ply over 12mm thick veneered panticle board with commercial face veneers fixed to chowkhat . The size of rail and stile as per IS : 1003 (Part-1), kiln seasoned and chemically pressure treated complete all as specified & directed. |
| 123 | M&L for preparing new surface of wood of any decription , not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all, as specified and directed. |
| 124 | S&F 150 mm long aluminium anodised handles or extruded section complete all as specified and directed. |
| 125 | S&F 300mm long Aluninium alloy, anodised , sliding door bolt with hasp , staple,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 126 | S&F floordoor stopper 140 mm of aluminium alloy body and tongue anodised with hard drawn steel springcomplete all as directed by Engineer-in-charge. |
| 127 | M&L preparing newly plastered surfaces of wall and applying two coats of oil bound distemper over one coat of alkali resistant primer on walls complete all as specified and directed. |
| 128 | M&L for Hard core of gauge n exc 63mm thick of broken boulder spread leveling watering ramming to true surface complete all as specified and directed by Engr-in-Charge.. |
| 129 | M & L for machine cut Kota stone slab flooring 20 to 25 mm thick over Screed bed or bedding layer of cement mortar 1:6, 20 mm thick base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed. |
| 130 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 15mm thick Screed bed or bedding layer of cement mortar 1:4 jointed withgrey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed. |
| 131 | Supply & fixing steel windows/ventilator with side hung shutters including projection type hinges with steel handle, tower bolt and steel peg stay, complete with glazing bars dovetailed or welded complete all as specified & directed. |
| 132 | S&F for 5mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified & directed. |
| 133 | S&F - Testing high BEE star rated energy efficient water heater storage type with multifunctional safety valve, electric operated 230 V, Single phase complete incl one no. of heating element, automatic, thermal cut out, fusible plug, anti vaccum sys, built in presser release valve, thermostat, rust proof powder coated body, indicator lamps and all safety advices as per E-in-c;s branch technical instructions and of capacity 25 ltrs including NRV valve & angle of grouting bolts in walls including pillar cock, CP connection ect and making good disturbed surfaces. |
| 134 | S&F bib taps 15 mm brass CP fency type with crutch or butterfly handle, screwed down screwed for GI pipe complete all as specified & directed By Engr-in-charge. |
| 135 | S&F stop valve 15 mm fency type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for GI pipe. |
| 136 | S&F 15mm bore GI tubing med grade including all fittings fixed complete to walls complete all as specified & directed By Engr-in-charge. |
| 137 | Cutting of Existing water supply main any size upto 25 mm for taking branch connection for taking branch connection of size 15 mm including insertion of Tee unegual all as required at site or directed by Engr-in-charge. |
| 138 | S&F single pole and neutral enclosure with a two pin plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed. |
| 139 | Supply, laying and drawing in and including 20 mm dia Casing capingfor laying casing caping making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6 sqmm (as earth wire) of stranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete including connection all as specified and directed. (From AC Boxto DB) |
| 140 | M & L for point wiring using approved colour coding as per IS by using FRLS PVC insulated 1.5 Sqmm multistranded,1100 volt grade copper conductor cable unsheathed type, alongwith 1.5 Sqmm FRLS PVC insulatedstranded copper conductor cable for continous earthing in & incl PVC casing & caping with accessories having ISI mark fixed on wall surfaces / ceilingincluding provision of suitable gang box for fixing switches, sockets, regularors, etc. for one light/fan/bell point controlled by one switch complete all as specified and directed. |
| 141 | Supply & fix of ceiling fans complete with remote and accessories 230 V,1200 mm sweep. BLDC ceiling fan Service value-6.00,210 CFM ,BEE 5 star ratedcomplete all as specified and directed |
| 142 | S&F Wall mounted electric chimney 200 watts touch control 90 cm filterless chimney, Auto clean technology , Touch control for 3 fan speed witn intensive mode& Twin channel high performance fan motor,Max. Noise lebel:-60 db maximum suction power 1000 m3/hr with staimless steel filter & heat resistant tempered glass including mettalic duct of appropriate size & cutting of holes for fitting of chimney duct as per site requirement(Appliance dimension 800 x 895 x435 mm)with 2 years comprehensive & 2 year motor warranty complete all as specified and directed. |
| 143 | Schedule of Credit |
