|
| 1 | Excavation over area n.exc 1.5m deep and getting out in hard/dense soil complete all as specified and as directed. |
| 2 | Excavating in trenches in hard/ dense soil n.exc 1.5M wide and n.exc 1.5M in depth for foundation, laying pipes, cables etc n.exc 10Sqm on plan and n.exc 1.5M in depth and getting out in hard/dense soilconcretecomplete all as specified and as directed. |
| 3 | M&L for cement concrete type D2 1:4:8 (40mm graded stone aggregate) in foundation, filling and mass concrete/ foundation of manhole complete all as specified and as directed. |
| 4 | M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) 75 mm thick in plinth protection, laid in alternate bays not exc. 3.0m in length, finished surfaces even and smooth without using extra cementincluding demolition existing concrete and rubbish off the premisescomplete all as specified and as directed. |
| 5 | M&L for PCC (1:2:4) Type B-1, Plain cement concrete with using 20mm graded aggregate in lintels upto 1.5 m clear span, copings, bed plates, cills, steps: seismic and other similar bands, plinth course, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs,complete all as specified and as directed. |
| 6 | M&L for RCC M-30 (Design Mix) as in foundation, indl raft, footing foundation beams, plinthbeams bases for columns, etc basement slab, under ramed piles and mass concretecomplete all as specified and as directed. |
| 7 | M&L for RCC M-30 (Design Mix) as in Beams, cantilevers, bressummers,lintels over 1.5m spancomplete all as specified and as directed. |
| 8 | M&L for RCC M-30 (Design Mix) as in Columns, pillars, piers, postscomplete all as specified and as directed. |
| 9 | M&L for RCC M-30 (Design Mix) as in chajjascomplete all as specified and as directed. |
| 10 | M&L for RCC M-30 (Design Mix) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likecomplete all as specified and as directed. |
| 11 | Formwork to sides of concrete foundations, footings, bases of columns, sides and soffits of foundation and plinth beams and similar work vertical or batter rough finished surface of concretecomplete all as specified and as directed. |
| 12 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished surface of concretecomplete all as specified and as directed. |
| 13 | Form work to sides of pillars, posts and columns rough finished surface of concretecomplete all as specified and as directed. |
| 14 | Formwork to chullah hoods, chajjas, troughs and similar items including edges rough finished surface of concretecomplete all as specified and as directed. |
| 15 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), rough finished surface of concretecomplete all as specified and as directed. |
| 16 | Formwork to edges of concrete surface exc. 10 cm but n. exc. 20 cm wide (Horizontal or sloping)complete all as specified and as directed. |
| 17 | M&L for steel reinf TMT bars 10 mm dia and over cut to length and bent to shape required including cranking, bending spirally for hoping for columns, hooking end and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clipscomplete all as specified and as directed. |
| 18 | .-ditto- but 5mm dia and over upto and including 10mm dia as in stirrups spacer and binderscomplete all as specified and as directed. |
| 19 | M&L for Pre-cast cement concrete block masonry with solid blocks, Type C1 1:3:6 (using 20 mm graded stone aggregate) exc. 10 cm in width and setting in cement mortar 1:6complete all as specified and as directed. |
| 20 | S&F Provided at the junction of RCC and masonry on the external surface instead a strip of chicken wire mesh 1.23mm dia and 20 mm size of mesh to be fixed over the junction before the plastering to act as reinforcement for the plastercomplete all as specified and as directed. |
| 21 | M&L for rendering 10 mm thick in CM 1:6 usingon fair faces of brick work or concrete surfaces and finish the surface even and smooth without using extra cementcomplete all as specified and as directed. |
| 22 | M&L for rendering 15 mm thick in CM 1:4 usingon other than fair faces of brick work or concrete surfaces and finish the surface even and smooth without using extra cementcomplete all as specified and as directed. |
| 23 | M&L 5 mm thick rendering on fair faces of concrete surfaces on ceiling in CM 1:3 and finishing the surfaces even and smooth without using extra cementcomplete all as specified and as directed. |
| 24 | M&L Rendering 10mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) in fascia or edging of Chajjas, ceiling and roof projections etc, finished even fair without using extra cementcomplete all as specified and as directed. |
| 25 | M & L three coats of white wash on new plastered surfaces on wall including preparation of new plastered surfacescomplete all as specified and as directed. |
| 26 | M&L preparation of newly plastered surfaces of walls and applying two coats of Dry distemper over a coat of primer chalk whiting on new surfacescomplete all as specified and as directed. |
| 27 | M&Lpreparation of newly plastered surfaces of walls two coats of Cement Base Paint over a coat of alkali resistant primer on newly plastered surfaces of walls including preperation of new surfacescomplete all as specified and as directed. |
| 28 | M&L preparation of plastered surfaces of ceiling and applying three coats of white wash on new surfaces complete all as specified and as directed. |
| 29 | S&F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type orJ-type or cranked hook bolts in lieu of screw in roofs, walls etc. with grade of zinc coating 275, etccomplete all as specified and as directed. |
| 30 | S&F 0.63 mm thick Galvanised, plain mild steel sheeting in ridges, hips, valley gutters , drip and straight flashings (length and girth as fixed ) with grade of zinc coating 275 fixed to corrugated sheets in roofs, walls etc. , etccomplete all as specified and as directed. |
| 31 | S&F Roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conferming to Fe 410W (gde -E-250) quality Acomplete all as specified and as directed. |
| 32 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut dia 16 to 20mm and exc 22.5cm but n exc 30cm longcomplete all as specified and as directed. |
| 33 | S&F Mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conferming to Fe 410W (gde -E-250)complete all as specified and as directed. |
| 34 | M & L Synthetic enamel paint two coats on new steel surface any description over 10cm width or girth over a coat of red oxide primer including preparation of surfacescomplete all as specified and as directed. |
| 35 | M & L Synthetic enamel paint two coats on new steel surface any description over 10cm width or girth over a coat of red oxide primer including preparation of surfaces in camouflage patterncomplete all as specified and as directed. |
| 36 | M&L for Hard core, broken stone or boulders of gauge n exc 63, deposit spread and levelled in layers n exc 15 mm thick watered and ramed to a true surfacecomplete all as specified and as directed. |
| 37 | M&L for Cement concrete 1:4:8 type D2(using 40 mm graded stone aggregate) 100 mm thick as in sub basecomplete all as specified and as directed. |
| 38 | M&L for Cement concrete 1:2:4 type B1(using 20 mm graded stone aggregate) 100 mm thick as in flooring complete all as specified and as directed. |
| 39 | M&L for second class hard wood in scantlings, clean sawn timber fixedcomplete all as specified and as directed. |
| 40 | M&L for Second class clean sawn soft wood Plain fillets, square, rectangular or triangular in section, sectional area exc. 06 sqcm but n.exc. 13 sqcm, secured with screwscomplete all as specified and as directed. |
| 41 | Plugging to walls complete for wood fillets, grounds moulding, etc. on cement concrete walls, at distance n. exc 1 mtr complete all as specified and as directed. |
| 42 | M&L for 9 mm thick Veneered decorative plywood, grade 1 (5 Nos of ply) (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work as in wall/panelling etccomplete all as specified and as directed. |
| 43 | M&L for 9 mm thick Veneered decorative plywood, grade 1 (5 Nos of ply) (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work as in ceiling, flat or sloping, etccomplete all as specified and as directed. |
| 44 | S&F laminated wood flooring in 8 mmthick, including skirting, floor breakers etc, as per manufacturer\"s instruction with a layer of foam backing,complete all as specified and as directed. |
| 45 | M&L Glazedceramic colouredtiles300x450mmx7mm thick for work vertical surfaces such as shirking/dado and risers to stepetc set and jointed in neat slurryand pointedin white /colouredcement and pigment to matchthe tiles over and including 10mm thick cementplaster inCM 1:4 ,complete all as specified and as directed. |
| 46 | M&L for coloured non skid digital ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed CM 1:4 for laying floor finihescomplete all as specified and as directed. |
| 47 | M/L light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed CM 1:4 for laying floor finihescomplete all as specified and as directed. |
| 48 | M&L 18 to20mm thick Granite stone any type(table rubbed and polished) machine cut ,bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stoneover 15mm thick screed bed in CM 1:4, including griding and polishing typescomplete all as specified and as directed. |
| 49 | M&L 18 to20mm thick Granite stone any type(table rubbed and polished) machine cut ,skirting/dado bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stonever and including 10mm thick cementplaster inCM 1:4 , including griding and polishing typescomplete all as specified and as directed. |
| 50 | Rounding to edges of stones slabs on edge, such as in steps, cooking platform, other similar sitiuationscomplete all as specified and as directed. |
| 51 | S&F Pressed steel frames for doors (105x60mm) with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,complete all as specified and as directed. |
| 52 | M&L for PCC type type B0 1:2:4 (12.5mm graded stone agg) for hold fast of doors and windowscomplete all as specified and as directed. |
| 53 | M&L for PCCtype type C1 1:3:6 (20mm graded stone agg) for back filling of chowkhats of doors and windowscomplete all as specified and as directed. |
| 54 | M&L for 30mm 2nd class hardwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkatscomplete all as specified and as directed. |
| 55 | M&L for preparation of new or previously undecorated wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of Pink primercomplete all as specified and as directed. |
| 56 | S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawingcomplete all as specified and as directed. |
| 57 | S &F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C\" channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawingcomplete all as specified and as directed. |
| 58 | S&F Powder coated (minimum thickness 50 micron) aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on threetracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below :- (i) Window frame :62.3x38mm X 1.15 mm thick for three tracks.(ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over. (iii) Aluminium beading - 0.7mm thick(iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete.(v)Aluminiumfittings suchaluminium suitable handle with auto interlock cap with suitable size .(vi) Making good of wall surfaces with silicon to match with existing surfacescomplete all as specified and as directed. |
| 59 | S & F Powder coated (minimum thickness 50 micron)Aluminiumframe work for doors, windows, ventilators, partition walls with one or more rebates including joining cleat for fixing etccomplete all as specified and as directed. |
| 60 | S & FPowder coated (minimum thickness 50 micron) aluminiumwindowand ventilator shutters, side hungor sliding typewithout sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminiumsnap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 no.) hinges 100 mm long (2 no. suitable handlecomplete all as specified and as directed. |
| 61 | S & F Powder coated (minimum thickness 50 micron)aluminiumdoor shutter , aluminium sections weighing not less than0.55 Kg / mincludingnecessary jointing cleats , glazing clips , rubber neoprene packing , 2 Noshandle 150 mm long and two nos of 150mm long aluminium tower bolots. in each shutter, hinges , anonised aluminium snap beadingfixed with screwscomplete all as specified and as directed. |
| 62 | S&F Door closer hydraulically regulated, aluminium body designation No. 3, universal type,complete all as specified and as directed. |
| 63 | S & F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy dutycomplete all as specified and as directed. |
| 64 | M&L for 4.8 mm thick sheet glass ordinary quality and glazing with aluminum section beading in square n. exc. 0.5 Sqm in each pane, complete all as specified and as directed. |
| 65 | M&L for 3mm thick figured glass, pin head type and glazing with aluminum section beading in square n. exc. 0.5 Sqm in each panecomplete all as specified and as directed. |
| 66 | M&L for 12mm thick toughned glass as in hinged doors,window, partitions automatic doors and similsr work incl cutting to shape, drilling holes reuiredcomplete all as specified and as directed. |
| 67 | S & FStainless steel wire cloth,0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or rubber/all beadscomplete all as specified and as directed. |
| 68 | S&F 100mm long butt hinges, medium weight, cold rolled mild steel,complete all as specified and as directed. |
| 69 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloycomplete all as specified and as directed. |
| 70 | S&F 150mm extruded aluminium alloy handles, fabricated type,anodisedcomplete all as specified and as directed. |
| 71 | S&F 200mm long aluminium anodised, barrel tower bolts of extruded sectioncomplete all as specified and as directed. |
| 72 | S&F 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed with doorcomplete all as specified and as directed. |
| 73 | M&L 18mm thick Prelaminated particle board, interior grade, prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame workcomplete all as specified and as directed. |
| 74 | S&F Hasp & staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate with screws 100mm size complete all as specified and directed by Engineer in Charge . |
| 75 | S&F Brass knobs 35-40mm diacomplete all as specified and as directed. |
| 76 | S & F 30 mm flap Continuous (piano) hinges, mild steel, bright finish or electrogalvanisedcomplete all as specified and as directed. |
| 77 | S&F chromium platedWall mixer (3-in-1) with arrangement for both telephonic hand shower and overhead shower arrangement with bend pipe Wall Mountedcomplete all as specified and as directed.Make: CERA Cat No:F1016403or equivalent |
| 78 | S&F Single lever basin mixer with 305 mm (12\") extended body and 600 mm braided connection pipe (without pop-up)complete all as specified and as directed.Make: CERA Cat No:F1016452 or equivalent |
| 79 | S&F Single lever sink mixer (table mounted) with 235 mm (9”) long swivel spout and450 mm long braided connection pipecomplete all as specified and as directed.Make: CERA Cat No:F1016551 or equivalent |
| 80 | S&Fbrass Bib cock with wall flange and aerator 50 to 65mm long 15 mm dia boretype withhandle, screwed down, screwed for iron pipe or famale of quarter turn type as fixed complete all as specified and as directed.Make: CERA Cat No:F1016551 or equivalent |
| 81 | S&Fbrass CP Angle /Stop cock long shank and cup (concealed type) with wall flange 15 mm dia borescrewed down with crutch handle both end screwed for iron pipe or union as fixed complete all as specified and as directed.. Make: CERA Cat No:F1016201 or equivalent: |
| 82 | S&Fbrass CP Two way Angle /Stop cock long shank and cup (concealed type) with wall flange 15 mm dia borescrewed down with crutch handle both end screwed for iron pipe or unioncomplete all as specified and as directed..Make: CERA Cat No:F1016211 or equivalent: |
| 83 | S&F Overhead rain shower square 150 x 150 mm (6” x 6”)complete all as specified and as directed.Make: CERA Cat No:F7010506ABor equivalent |
| 84 | S&F telephonic Hand shower 110 mm dia (4”) with 3 flow, wall hook and 1.5 metre hosecomplete all as specified and as directed.Make: CERA Cat NoF7030112ABor equivalent |
| 85 | S&FHealth faucet(ABS Body) with wall hook and 1.00 m long SS braided connection pipe and wall hook complete all as specified and as directed.Make: CERA Cat NoF8030109ABor equivalent |
| 86 | S&FOutlet waste connection pipe for single bowl sink without overflowallcomplete all as specified and as directed.Make: CERA Cat No B4811503or equivalent |
| 87 | S&F Polyamid braided connection pipe 12 mm dia, 450 mm length fixing with all necessary arrangementscomplete all as specified and as directed.Make: CERA Cat No F8070402 or equivalent |
| 88 | S&F Geyser connection pipe 12 mm dia, 450 mm length fixing with all necessary arrangements complete all as specified and as directed.Make: CERA Cat No F8070403 or equivalent |
| 89 | S&F CP Toilet paper holder with flap coverfixing with all necessary arrangementsetc..,complete all as specified and as directed.Make:- CERA F5004110 or equivalent |
| 90 | S&f Chromium plated Soap dish fixed all as per manufacturing instructions andcomplete all as specified and as directed. Make:- CERA F5004106 or equivalent |
| 91 | S&f Soap dispenser glass push button model capacity 0.8 ltr of ABS body fixed all as per manufacturing instructions andcomplete all as specified and as directed. Make:- CERA F5003111or equivalent |
| 92 | S&F CP Towel Ring roundincluding with all fixing arrangemetns andcomplete all as specified and as directed. Make:- CERA F5003105 or equivalent |
| 93 | S&F CP Towel Rack 450mm long with out hangersand with lower hanger including with all fixing arrangemetns andcomplete all as specified and as directed.Make :- CERA F5003101 or equivalent |
| 94 | S&F Corner glass shelf (small) 150 x 150 mm (6” x 6”) with ss railing including with all fixing arrangements andcomplete all as specified and as directed. Make :- CERA F5005101 or equivalent |
| 95 | S&F looking mirror(900x600x6 mm) with frame andcomplete all as specified and as directed.Make :- Prayag (Model No : BLM-03F) or equivalent . |
| 96 | S&F Bottle Trap 300 mm including with all fixing arrangemetns andcomplete all as specified and as directed.Make :- Cera Cat. No. F8060406 or equivalent |
| 97 | S&F Flat Cut Square Stainless Steel Floor Drain 6 x 6 inches, Jali for Bathroom and Kitchen Floors, Waste Water Drain Jali | including with all fixing arrangemetnsandcomplete all as specified and as directed. |
| 98 | M&L for 20mm, 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.complete all as specified and as directed. |
| 99 | M&L for 16mm, 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.complete all as specified and as directed. |
| 100 | S&F Harrison rails,anodised aluminium alloy, chromium plated with fixing brackets, stops, rollers etc. including with all fixing arrangementscomplete all as specified and as directed. |
| 101 | S& F 1mm thick stainless steel sink, plugs, washers, PVC waste pipe, union, CP coupling & fixed in RCC cooking platform, overall size of sink 915mmx460mm, bowl size 410mmx330mmx160mm as complete all as specified and as directed. |
| 102 | S& F 0.56mm thick stainless steel plate rack of standard pattern & 31”x36” size including fixing to wall with 4 Nos 50mm screws & PVC rawl plugscomplete all as specified and as directed. |
| 103 | S&F Table top Vitreous china Wash hand basin white concealed /under counter basin type fit under granite platform size 450 x 450 x 140 mm Thin Rim Table Top Wash Basin including with all fixing arrangemetnscomplete all as specified and as directed.Make : Cat. No. A2020113 or equivalent |
| 104 | S&F Vitreous china wash down water closet pan (pedestal pattern)white/coloured cascade type 655 x 355 x 735 mm(monolithic flush cistern type) One pieceEWCwith slim soft close seat cover ,Hinges fixing accessories set including flush cistern with S-Trap of size 220mm all as per manufacturing instructions andcomplete all as specified and as directed.Make : Cera Cat. No. S1013207VS or equivalent |
| 105 | S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern ) including PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) for fixing of WC and making good floor to match the existing surface,complete all as specified and as directed. |
| 106 | S & F full pedestal Vitreous china wash basin, white flat back,size 550 x 400 mm including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting standand 32 mm diaPVC waste pipeincluding waste copling 32mm size full thread , complete all as specified and as directed. |
| 107 | S&F PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outletconnections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WCcomplete all as specified and as directed. |
| 108 | S&F 1000 Litres capacitytank of High-quality Polyurethane Foam (PUF) Insulation Thickness is 50 mm & Density is 40 kg/cu.m ,complete all as specified and as directed. |
| 109 | S&F 20mm borePP-R Gate valves (brass insert) as per requirement of the sitecomplete all as specified and as directed. |
| 110 | S&F 20mm bore PP-R Ball valves (brass insert) high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed,complete all as specified and as directed. |
| 111 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; andcutting chases for concealed watertubing or concealed conduit wiring,etc., and making good, cutting notexc 10 cm girthcomplete all as specified and as directed.. |
| 112 | S&F PVC (SWR)floor trap 75 mm with grating including jointing to waste pipe with solvent cement fixed in cement concrete type B-1 (1:2:4)complete all as specified and as directed. |
| 113 | S&F PVC (SWR)gully trap 125/110 mm with grating including jointing to waste pipe with solvent cement and fixed in cement concrete type B-1 (1:2:4)complete all as specified and as directed. |
| 114 | M&L110 mm dia PVC (SWR) type \"B\" pipes single socketed in any length with rubber ring joints, laid in trenches or floors as waste pipesjointed with solvent cementcomplete all as specified and as directed. |
| 115 | M&L110 mm dia PVC (SWR) type \"B\" pipes single socketed in any length with rubber ring joints, fixed to walljointed with solvent cementcomplete all as specified and as directed. |
| 116 | M&L75 mm dia PVC (SWR) type \"B\" pipes single socketed in any length with rubber ring joints, fixed to wall jointed with solvent cementcomplete all as specified and as directed. |
| 117 | M&L75 mm dia PVC (SWR) type \"B\" pipes single socketed in any length with rubber ring joints, laid in trenches or floors as waste pipesjointed with solvent cementcomplete all as specified and as directed. |
| 118 | M&L110 mm dia PVC (SWR) Bends for connecting or diversion of pipes fixed with solvent cemntcomplete all as specified and as directed. |
| 119 | M&L75 mm dia PVC (SWR) Bends for connecting or diversion of pipes fixed with solvent cementcomplete all as specified and as directed. |
| 120 | S&F PVC (SWR) branch piece single (single ‘Y’) equal or unequal for 110mm bore PVC pipecomplete all as specified and as directed. |
| 121 | S&F PVC(SWR) branch piece single (single ‘Y’) equal or unequal for 75mm bore PVC pipecomplete all as specified and as directed. |
| 122 | S&F for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 110mm bore pipe complete all as specified and as directed. |
| 123 | S&F for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 75mm bore pipe complete all as specified and as directed. |
| 124 | S&F PVC vent cowl of 110mm dia complete all as specified and as directed. |
| 125 | S&F PVC vent cowl of 75mm dia complete all as specified and as directed. |
| 126 | S&F stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110mm dia of borecomplete all as specified and as directed. |
| 127 | S&F stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm dia of borecomplete all as specified and as directed. |
| 128 | M&L150 mm dia PVC (SWR) type \"B\" pipes single socketed in any length with rubber ring joints, laid in trenches or floors as waste pipesjointed with solvent cement incl demolition of existingcomplete all as specified and as directed. |
| 129 | M&L for cement Concrete bed (1:4:8 type D2) to 150 mm diapipes including packing under, and haunching against the sides of pipes after they are laid and testedcomplete all as specified and as directed. |
| 130 | S&F Anodised aluminium grill for window(anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement andcomplete all as specified and as directed. |
| 131 | Returning, filling including spreading, watering and well ramming in layers n.exc 25 CM in hard/dense soilcomplete all as specified and as directed. |
| 132 | Removing excavated materialto a distance exc 250 mtr but not exc 500 mtr depositing where directedcomplete all as specified and as directed. |
| 133 | Surface excavation not exc. 30 cm deep and averaging 15cm deep and getting out in hard/dense soil, complete all as specified and directed by Engr in charge. |
| 134 | M&L for 100 mmPCC 1:4:8: type D2 (using 40 mm graded aggregate) in floors as sub base complete all as specified and directed by Engr in charge. |
| 135 | M&L for 60 mm thick M-40 grade machine pressed precast concrete interlocking paver block any shape and size conforming to IS-15658-2006, with grey cement and pigment, Complete all as specified and as directed by Engr-in-Charge. |
| 136 | M&L for sand cushoning/ Sand filling under floors (below paver blocks) including watering and consolidation, Complete all as specified and as directed by Engr-in-Charge. |
| 137 | M&L for Filleting in any position and to any shape in cement mortor 1:4 exc. 25 but n exc. 50sq. Cm and in repair, Complete all as specified and as directed by Engr-in-Charge. |
| 138 | M&L cement concrete 1:4:8 type D2 using 40mm graded stone aggregate for foundation of manholes all as specified and as directed. |
| 139 | M&L plastering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound finished even and smooth without using extra cement all as specified and directed. |
| 140 | Supply only Integral waterproofing compound all as specified and directed. |
| 141 | M&L cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in benching including necessary form work all as directed and specified. |
| 142 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc all as specified and directed. |
| 143 | Material & labour for 150 mm dia salt glazed stone ware (SGSW) drain pipes Grade A laid in any leangth and jointed with cement concrete 1:1 laid in trenches and testedcomplete all as specified & directed. |
| 144 | M&L cement concrete 1:4:8 type D2 using 40mm graded stone aggregate to bed concrete to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm dia pipe complete all as specified & directed. |
| 145 | Supply and instaliation of Polythehe (LLDPE Underground septic tank) of capacity 1000 Ltr (CCST-100-01) of Roto moulding grade conforming to IS 10146:2003 and Relaince \"O\" 35042 grade MFI : 2.0 to 6.0 gm/10 minutes and denisity 932 to 943 Kg/Cum and carbon black master batch content 40% ± 1% and ash content 1% max. The avarage weight of tank shall be 40+ 1Kg and wall thickness 7.3mm. The tank shall be installed as per manufacturer instructions.Note :- The excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc complete all as required as per manufacturer\"s instructions will be included in cost of LumpSum quoted against this item and nothing extra shall be paid on this account and tenders are to quote their rates accordingly. |
| 146 | Material & labour for construction of soakage well excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats, size of soakage well 1.8m dia and 3.00m effective depth all as specified and as directed. |
| 147 | M&L XLPE insulated screened PVC bedded,galvanized steel strip of wire armoured,electric power cables (heavy duty) laid in tranches,1100 volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core complete all as specified. |
| 148 | M&L for PCC cable coverClass LV, Type I,flat,size 250 mm x 150mm x 40mm laid Flat in trenches over the cable with length 250mm perpendicular to the direction of cable, adjacent/ abutting each other complete all as specified and directed.Note:-Excavation and earth work to be measured and paid for separately |
| 149 | M&L Sand cushioning to protection of underground cables, laid 8 cm before laying and 15 cm after laying of cable, and punned to form an overall layer of 18 cm thick, complete all as specified and directed by Engineer-In-Charge.Note: Punned thickness of sand shall be measured. |
| 150 | M&L GI Tube light grade of size 80 mm with all fittings and fixed complete to wall and ceiling or laid in floor for cable crossing complete all as specified. |
| 151 | M&L LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP66 protection, including LED lamps of 30/35 Watt and connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified. |
| 152 | S&F Sheet Moulding Compound ( SMC),hinged door type and locking arrangement, off white colour of size 240x130x95 mm (internal dimensions) comprising 4 Nos aluminium bus bar of 200 Amps complete on 6 Amp MCB SP adequate capacity includingsuitable Size MS clamps,including taking down old unserviceable junction box complete all as specified and as directed by engineer-in-charge. |
| 153 | supply and fixing SPN 32 amp rating 240V,10KA \"C\" curve MCB 32 ampcurrent carring capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 154 | Supply & Fixsub main wiring of 2x4.0 sq. mm + 1x2.5sq. mm earth wire sqmm PVC insulated unsheathed FR cable multistranded copper conductor with earth wire of 4 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC casing Capingall as specified and directed. |
| 155 | S&F Steel tubular, swaged pole, 8.5 Mtr long type 410-SP-22 complete with cast iron base plate final taper plug, bolts, nut and screws complete including painting internally and upto planting depth externally with anti corrosive paint, alternative black and yellow straps 30 cm each upto 1.5 mtr height from GL and remaining pole with two coats of aluminium paint over a coat of red oxide including writting number complete all as specified and directed. |
| 156 | M&L 32mm bore 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 6 (PN20) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed |
| 157 | M&L 3-layer PP-R Polypropylene random copolymer) Gate Valve 32mm bore complete all as specified and as directed |
| 158 | Drilling and tapping GI/PPR water mains (in position) the existing pipe of 50mm to 75mm for branch connections including inserting tee of size 50X50X25mm or as per site conditions complete all as specified and as directed.Note: The quoted rate shall deem to include Excavation, RFR and removal etc. nothing extra shall be paid. |
| 159 | M&L for point wiring with 1100 volt grade PVC insulated-unsheathed 1.5 Sq mm (FRLS) multistranded copper conductor cable, with continuous earth wire of 1.5 Sq mm (FRLS) multistrandedcopper conductor cable PVC insulated-unsheathed, drawn in & including concealedPVC conduit medium grade with fittings (ISI marked) not less than 25 mm dia incl TEE, bends, elbows, junction boxes etc. with valid CML number as continuity earth wire and including modular sunken box/ galvanised box with 4, 6, 8, 12 & 16 Nos Modular plate for fixing of modular swithes, sockets and fan regulators etc complete all as specified and as directed for the following:- |
| 160 | One light/fan/bell/exhaust fan point controlled by one switch |
| 161 | One bell buzzer point controlled by one push button independent |
| 162 | All as per item No 159.00 above but with 2.5 Sqmm for multi purpose socket 5 Amps, 3 pin on independent board. |
| 163 | All as per item No 159.00 above but with 2.5 Sqmm for multi purpose socket 5 Amps, 3 pin on same board. |
| 164 | M&L for point wiring with 1100 volt grade PVC insulated-unsheathed 4.0 Sq mm (FRLS) multistranded copper conductor cable, with continuous earth wire of 4.0 Sq mm (FRLS) multistrandedcopper conductor cable PVC insulated-unsheathed, drawn in & including concealedPVC conduit medium grade with fittings (ISI marked) not less than 25 mm dia with valid CML number as continuity earth wire and including modular sunken box/ galvanised box with 4, 6, 8, 12 & 16 Nos Modular plate with provn of sunken concealed terminal boxes complete all as speficied and as directed. |
| 165 | S & F switch piano flush button single pole one way 6 amps 1 module with suitable plate and cover complete all as specified and directed |
| 166 | S & F socket outler flush (piano) type 3 pin 6 amps with suitable plate and cover complete all as specified and directed |
| 167 | Supply and fixing 16 Amps socket 2/3 pin complete all as specified and as directed by Engr-in-Charge. |
| 168 | S & F switch modular (piano) flush button single pole one way 16 Amps with suitable plate and cover complete all as specified and directed |
| 169 | S & F modular bell push flush type, 5 amps complete all as specified and directed |
| 170 | S & F ceiling rose PVC/ poly carbonate, isolated body three terminals, complete as specified and directed |
| 171 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories 230V 1200 mm sweep. Min air delivery 210 CFM with service value 6, BEE Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 172 | S & F Distribution board SPN 8 way, 240 volts factory made powder coated, double door with neutral and earth link suitable for fixing MCBs including connecting complete all as specified and directed |
| 173 | S & F MCB\"s single pole 6 to 32 Amps 240 volts with \"C\" curve 10 KA fixed in sheet metal board including connecting complete all as specified and directed |
| 174 | S & F MCB\"s SPN 40 Amps 240 Volts with C curve, fixed in sheet metal board including connecting complete all as specified and directed |
| 175 | S & F LED light fitting 1x20W 220 V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed |
| 176 | S & F LED light decorative ultra slim round profile LED lighting with extured polycarboinate environmental friendly energy efficient ready to use pack 2 feet 9 watt 220 V AC including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed |
| 177 | M & L sub-main wiring with 3 single core 6 Sqmm PVC insulated, unsheathed 1100 Volts grade. Copper multi stranded conductor drawn in PVC conduit ISI marked includingwith its fittingss and fixtures such as TEEs, bends, elbows, junction boxes, including multistranded copper conductor 4.0 Sqmm (nominal cross sectional area) Single Core PVC insulated unsheated FRLS cable 1100 volts grade ISI marked with valid CML number as continuity earth wire drawn through and connected to main switch and testing on completionNote (i) 2x6.0 sq. mm + 1x4.0 sq. mm earth wire conductor shall be measured as one length |
| 178 | M & L for earthing complete with galvanized steel earth plate electrode 60x60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt and connected to earth lead galvanised iron 4 mm dia wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel and thimbles and other end of the earth wire connected to DB and protected by galvanised iron or steel pipe light grade 15 mm bore and water pipe 20 mm bore GI light grade with funnel and wire mesh, including all necessary excavation shown in electrical plate No 3 of MES schedule Pt I of 2009 complete all as specified and as directed.Note:- RCC pit cover shall be pre-cast RCC(1:2:4) type B-1, 80mm thick reinforced with XPM weighting not less than 4 KG/Sqmm in lieu of cover. |
| 179 | S & F distribution board power line, VTPN, 4 way, 415 volts factory made powder coated, double door with neutral and earth link, including 3 pole MCCB 63 Amps rating, 16 KA breaking capacity for incoming supply and provision of MCBs 6 to 32 A for outgoing supply complete all as specified and directed. |
