Tender For Material Supply For Gym In Gp Durgapura Ps Patodi Distrcit Balotra - Surfing Board Providing And Installing A Surfing Board Of Minimum Size 1000 Mm (Length) 600 Mm (Width) 1400 Mm (Height) To Build Up The Lumbar Muscle Groups, Enhance Body Co, Barmer-Rajasthan

Tender For Material Supply For Gym In Gp Durgapura Ps Patodi Distrcit Balotra - Surfing Board Providing and installing a surfing board of minimum size 1000 mm (length) 600 mm (width) 1400 mm (height) to build up the lumbar muscle groups, enhance body coordination and flexibility. The framework of the main structure shall be made from G.I. based 40 NB C grade pipe with minimum Cr 250 mm and 10 mini thick MS round base plate. Footrests shall be made from high quality fibre reinforced plastic material. Tough tensile steel with galvanized nut bolts shall be used for assembly. Powder coating shall be done with pure moliest powder of absorbent nerolac with minimum 60 to 70 micron thickness, under the directions of Engineer-in-Charge to meet all aspects including fixing M.S. holdfast in cement concrete to hold the whole structure. Functional requirement Sarking Board Providing and fixing cross trainers of size not less than 1320 mm (length) 600 mm (width) x 750 mm (height), to enhance mobility of upper and lower limbs and improve flexibility of joints. Main structure shall be made of frame G.1. pipe of class C minimum 80N welded with M.S. round base plate minimum 0250 mm and 10 mm thick. Band frame shall be made of class 256 pipe minimum 25N. Footmeter shall be provided with high tensile steel with minimum 130mm galvanic (3%23 pm, 25/02/2022] Passun: Nuts and bolts shall be used for assembly. Powder coating shall be done with pure polyester powder of AkzoNobeldhvargasthnerolac of minimum 60 to 70 micron thickness, complete in all aspects including curing MS. Under the instructions of Engineer-in-Charge to meet the functional requirement, the entire structure is firmly placed in cement concrete to hold. (Cement concrete and excavation work will be paid separately) (Cross Trainer Providing and fixing seated puller of minimum size 1900mm (length) 740mm (width) 1920mm. (height), to increase the strength of upper limbs and chest and back muscles and To promote cardio pulmonary function. The main structure frame shall be made of G.1.PP mitt of BONBG class welded with MS. Round base plate minimum 250 mm and 10 mm thick. Handrail shall be minimum 32 NB C class G.L. PIPC- Sam Parem minimum 32 NB C class G.L. Closing caps shall be made of high quality fibre reinforced plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. Powder coating shall be done with pure polyester powder of AkzoNobel Vergsenrolac paints of 60 to 70 micron thickness, G.M.S. shall be complete in all respect including curing. Under the instructions of Engineer-in-Charge to meet functional requirement, place the entire beam firmly in cement concrete to hold it. Seated puller 4 Provide and install sit up board of double size of minimum 700mm (length) 1640mm width 600mm (height) to enhance flexibility of the whole body. Main structure frame shall be made from GI. Chelvez minimum 80NB C class pipe with MS. Round base plate minimum 0250mm and 0mm thick. Remaining frame of sit up board to be made from minimum 32mm NV Shell Shee Vallara GL Maize. Powder coating shall be done with pure polyester powder of EkzoNoble/Graded/Larylac with minimum 60 to 20 micron thickness, fully cemented to hold the whole structure, under the instructions of Engineer-in-Charge to meet impact functional requirement including curing of MS. (Cement concrete and excavation work to be paid separately). Sit Up Board Double -5 2000mm (Length) 710mm (Width) To provide and fix post press of size not less than 2200mm. (Action), To enhance strength of upper limbs and chest & back muscles and to promote cardio pulmonary function. Main furniture frame shall be made of GI. Valved pipe of minimum 30NB “C” class with minimum 250 mm & 100 mm thick MS round base plate. Handle bars shall be made of minimum 32NB C class GI pipe. Seats and back rests shall be fitted on outer frame. 330 mm 300 mm GI shall be made of MS. sheet of not less than 2 mm thickness. Cleaving compasses shall be made of high tensile frosted steel with galvanized nuts and bolts for assembly. The casting shall be done with pure polyester powder of AkzoNobel Bergesnerolac PETS of 60 to 70 micron thickness, complete in all respect including fixing MS holdfasts in cement concrete to hold the entire structure, under the instructions of Engineer-in-Charge to meet workmanship requirement. (Cement fill and excavation work will be paid separately). CHEST PRESS Providing and fixing pommel horse of size not less than 2150mm (length) 800mm (girth) 800mm. (height) to enhance flexibility of lower limbs. Waist and abdomen Main structure shall be made of GI pipe minimum 80NB&C class M.S. welded with round base plate minimum 0250mm and 10mm thick. Handle prom should be minimum 32NB and should be made from class Q pipe. Closing caps shall be made of high quality fibre reinforced plastic material. High tensile steel with galvanized steel and small bolts are used for assembly. Powder coating shall be done with pure polyester powder of AkzoNobel Dhagar Dhaarolac of minimum 60 to 70 micron thickness, complete in all aspects including curing of GMS. The entire structure is firmly cast in cement concrete to hold the structure, under the directions of Engineer-in-Charge to meet the functional requirement. (Cement concrete and excavation work will be paid separately) Pommel Horse Providing and fixing cam shaped seating and standing twisters from 1500 mm (length) 600 mm (width) 1300 mm. (Sanghai), to increase flexibility of waist. Suitable for people of different ages except children. The framework of the main structure shall be made of G.I. steel of minimum NB C grade welded with M.S. Round base plate minimum 0250 mm and 10 mm thick. The twister plate to be fitted at the bottom shall be made of M.S. Round plate of minimum size 300 nm vyara and 10 mm notai. Closing caps shall be made of high quality fibre reinforced plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. Powder coating shall be done with pure polyester powder of AkzoNobelGasNerolac of minimum 60 to 70 micron thickness, compliant with M.S. The structure shall be complete in all aspects including the installation of cement concrete to hold the entire structure firmly under the instructions of Engineer-in-Charge to meet the functional requirement. (Cement concrete and excavation work shall be paid separately) Bubble Standing Twister Provision of 5.5-6.25-2.5 ft size manufactured with center pipe of 50 NB and fixing shall be done from C-Clam. G.I. material bottom shall be paved with support of M.S. /250 mm thick and round plate of 10 mm thickness. Hall of 20NB shall be made from Premka. The net shall be used for fixing a structure and it shall be made from center pipe of GI of 50 NB class welded with M. 250 mm and round plate of 10 mm bottom. Main pipe shall be supported with 25mmx25mm M.S. angle of 3 mini thickness and 200 mm 40 mini CRC square pipe of 3 mini thickness. Closing shall be made of low grade quality fiber reinforced plastic material. High tensile steel with galvanized nuts and bolts shall be used for the awl. All complete as per drawing, design, instructions and approval of Engineer-in-Charge in respect of material, equipment size, colour and fixing of equipment etc. (Cement concrete and excavation work will be paid separately) Provision of two seater CC 55-1.256 feet size constructed with centre pipe of 50 NB and fixing shall be done from C class. G.I. material. Bottom shall be welded with support of M.S. /250 mini and round plate of 10mm thickness. Handle pipe of 25NB shall be made from C class G-4. pipe. Foundation should be used for fixing a structure and it shall be made from centre pipe of 50 NB C class GI welded with M. 250 mm and round plate of 10mm thick. Main pipe shall be supported with 25mmx25mm M.S. Angles of 3mm thickness and 200mm 40mm CRC square pipe of 3mm thickness. Closing caps shall be made of high quality fibre reinforced plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. All complete as per drawing, design, instructions and approval of Engineer in Charge regarding material, size of equipment, colour and fixing of equipment etc. (Cement concrete and excavation work shall be paid separately) Slip Box Bal Moola Size LxWxH Fit 8 Fit 10 Fit Main Model : 88-9MM ERW GI C Balls Mip Support Pine : 48.3 MM 33.7MM Ramnew GI Pipe Maximum User Weight : 240 Kg Indian Technology with rust proof powder coating Complete GI C Balls Pipe Construction Design ISI Certified GI Pipe. Quality Beale NBCSKF or other as per customer request. Color option red/blue/green/yellow/pe/white Double color as per customer demand Fitting as per carrier demand with hinges or single piece CRCULAR SWING YOUR SEATER Providing and fixing four seater circular SWFNG of size 6.0X5.25X5.0 feet fabricated with Senor Chipsafe frame of 5 NB shell made from C class G.I pipe and FRP material. Bottom side shall be braced with M.S. round plate of 10250 mm and l0 mm thickness. Nibla of 32 MB shall be made from Fame C class G.I. pipe. Handle Jig of 25 MM shall be made from C barade G-1. Vidhi Foundation should be used for fixing. One side and shell shall be made from St pipe of GJ. 65 NV Ubnyu CLS welded with HS. Round plate of 250 mini and ldhmm thick main pipe shall be fitted with 25 mm 25 mm M.S. mm thickness and angle of 2x40mm CRC similar pipe of 3mm thickness. The pipes shall be of high quality fibre reinforced plastic material. High tensile steel with guanized nuts and bolts shall be used for the fisherman (ceiling). Powder coating shall be done with pure polyester powders Tom AkzoNobel or Berger Pets with thickness of 60 to 20 micron, as per drawing, design, instructions and approval of Engineer-in-Charge. Materials, size, colour of equipment (cutting, seat and pouring), and fixing of equipment etc. (cement concrete and digging work). Earth work In cutting, lifting of 1.5 m to 50 m. Execution and installation of dog well, installation of comb, rose in the hoe and levelling and raking of the drained soil. Laying cement concrete in the foundation of soil cutting and running middle and surface vibration machine and mixing broken soil with 40 mm sieve and preparing desired ped a camber and super elevation (1:36) Mixing controlled concrete on the top surface of Sonnets confit and running needle and surface vibration machine (vibrator) and preparing desired rose and camber along with sliding surface and preparing super elevation (1:1:5:3) continagencis

Refer document

Refer document

INR 4.93 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB