|
| 1 | Dismantling of cast iron/PVC pipes 100/75 mm dia, jointed in cement mortar from walls and taking out of trenches, if required, complete, all as specified & directed by Engineer-in-charge. |
| 2 | S&F PVC SWRpipes single socketed, in any length, 110 mm dia,with rubber ring joints fixed to walls, complete, all as specified & directed by Engineer-in-charge. |
| 3 | S&F PVC SWRpipes single socketed, in any length, 110 mm dia,with rubber ring joints laid in trenches or in floors,complete, all as specified & directed by Engineer-in-charge. |
| 4 | S&F PVC SWRpipes single socketed, in any length, 75 mm dia,with rubber ring jointslaid in trenches or in floors ,complete, all as specified & directed by Engineer-in-charge. |
| 5 | S&F 110mm PVC(SWR) bends any radius, with/without oval access door,complete, all as specified & directed by Engineer-in-charge. |
| 6 | S&F 75mm PVC(SWR) bends any radius, with/without oval access door,complete, all as specified & directed by Engineer-in-charge. |
| 7 | S&F 110mm PVC (SWR), Junction single, (Single T) equal or unequal), fixed with solvent cement,with/without oval access door, complete, all as specified & directed by Engineer-in-charge. |
| 8 | S&F 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement etc complete, all as specified & directed by Engineer-in-charge. |
| 9 | S&F 100mm PVC (SWR),PVC (SWR) vent cowl, fixed with solvent cement, complete, all as specified & directed by Engineer-in-charge. . |
| 10 | Taking downGI/PVC/PP-Rpipe of size 15mm/16mm bore and connection including cleaning for refixing or removal to store complete, all as specified & directed by Engineer-in-charge. |
| 11 | M&L 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors of 20 mm dia complete, all as specified & directed by Engineer-in-charge. |
| 12 | S&Fin repairs chromium plated fancy type 15 mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete, all as specified & directed by Engineer-in-charge. |
| 13 | S & F in repairs Toilet paper holder with flat recessed type stainless steel fixed in repair to walls with chromium plated (CP) brass screws complete all as specified and directed. |
| 14 | S&Fin repairs 15mm bore fancy type Pillartaps,cast copperalloy,with capstanheads, chromiumplated, screwed down high pressure,withor withoutlettered \"Hot\" or \"Cold\" with longscrewed shanks and fly-nuts, screwedforiron pipe and fixed complete, all as specified & directed by Engineer-in-charge. |
| 15 | Supply & fixing in repairs 15mm bore Stop valves, fancy type Chromium plated, cast copperalloy,screweddown,highpressure,withcrutch or butterflyhandle,screwedboth endsforiron pipeorfor unions and fixed complete, all as specified & directed by Engineer-in-charge. |
| 16 | Supply & fixed (in repair) vitreous china wash hand basin white flat back of size 550x440mm including CI brackets and PVC connection 450 mm long having PTMT nuts and chromium plated waste coupling and making good to disturbed portion including32 mm dia PVC waste pipe and pedestaletc., complete all as specified. |
| 17 | S&F in repair soap dish any type, fixed to plugs with chromium plated brass complete, all as specified & directed by Engineer-in-charge. |
| 18 | S&F in repair PVC connections 15mm size with PTMT nuts of length 300mm complete, all as specified & directed by Engineer-in-charge. |
| 19 | Supply & fixed (in repair) vitreous china wash down water closet pedestal pattern (EWC) , White including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap, making good to floor, Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete, all as specified & directed by Engineer-in-charge. |
| 20 | S&F in repair sheet glass assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete, all as specified & directed by Engineer-in-charge. |
| 21 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete, all as specified & directed by Engineer-in-charge. |
| 22 | S&F in repairs 10 litres capacityPVCvalveless syphonic action type low level flushing cistern white with inlet, ball valve, float and handleincluding bracketscomplete all as specified and directed by Engineer-in-Charge |
| 23 | S&F sinks (in repair) made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastesincluding bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete, all as specified & directed by Engineer-in-charge. |
| 24 | S&F in repairs for towel rail (min wt 170 grams) 450 mm long of PTMT fixed in repair with and including chromium plated brass screws and wooden/plastic cleats complete, all as specified & directed by Engineer-in-charge. |
| 25 | Supply and fixing in repair 20 mm dia mild steelchromium plated curtain rods with including , bracket, holding and funnel on ends as fixed in repairs complete, all as specified & directed by Engineer-in-charge. |
| 26 | Dismantling wall and ceiling board or insulation boards any thickness including cover fillets complete, all as specified & directed by Engineer-in-charge. |
| 27 | M&L for 9 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work fixed in ceiling complete, all as specified & directed by Engineer-in-charge. |
| 28 | M&L for 12 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete, all as specified & directed by Engineer-in-charge. |
| 29 | M&L for preparing new or previously untreated wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic varnishing finishing coat, over a coat of wood filler coat complete, all as specified & directed by Engineer-in-charge. |
| 30 | Dismantlingtimber frame, framed work as in fillets, rails, posts, purlins, etc under 40 sqcm in section. complete, all as specified & directed by Engineer-in-charge. |
| 31 | M&L for second class hard wood in scantling, clean sawn timber framed and fixed work complete, all as specified & directed by Engineer-in-charge. |
| 32 | M&L for second class wrought hard wood plain fillets, square, rectangular or triangular in section, sectional area 6 sqcm but n exc 13 sqcm, secure with screws,complete, all as specified & directed by Engineer-in-charge. |
| 33 | S & F in repairs laminated wood flooring 8mm thick, including skirting, floor brakers etc, as per manufacutred instruction with a layer of foam backing, complete, all as specified & directed by Engineer-in-charge. |
| 34 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing debries out side defence area complete, all as specified & directed by Engineer-in-charge. |
| 35 | Material & Labour for Non - skid coloured Ceramic tiles (400x400mm) 7 to 8 mm thick , dark shade (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and includingcement screed bed 15mm thick in screed bed (1:4) base, complete, all as specified & directed by Engineer-in-charge. |
| 36 | M&L forcoloured glazed ceramic tiles (300x 450x 7mmthick)in vertical surfacesand jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement plaster 1:4 complete, all as specified & directed by Engineer-in-charge. |
| 37 | M&L 18-20 mm thick black granite stone slab of any type with table rubbed and polished , set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab complete, all as specified & directed by Engineer-in-charge. |
| 38 | Demolition of pre-cast cement concrete block walling built in cement mortar complete all as specified and directed by Engineer-in-Charge. |
| 39 | Material and labour for providing precast cement concrete block of PCC (1:3:6) type-C1 in masonry with solid blocks, exceeding 10cm in width & set in cement mortar (1:4) complete, all as specified & directed by Engineer-in-charge. |
| 40 | Taking down cement plaster on brick wall/concrete surfaces etc including racking out joints hacking for key scrubing down with water etc of any thickness including Dado any descriptioncomplete, all as specified & directed by Engineer-in-charge. |
| 41 | M&L for 15mm thick rendering on fair faces of brick or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete, all as specified & directed by Engineer-in-charge. |
| 42 | M&L for 15 mm thick rendering on brick or concrete surfacesin CM 1:4with , finishing the surface even and smooth without using extra cement complete, all as specified & directed by Engineer-in-charge. |
| 43 | Material & Labour for two coats of oil bound distemper over a coat of primer incl preparation of new plastered surfaces of walls and applying 3mm thick (Minimum) white cement based wall care putty in two coats, finished even and smoothcomplete, all as specified & directed by Engineer-in-charge. |
| 44 | M&l fortwo coats of cement base paint over a coat of alkali resistant primer incl preperation of new surfaces of walls complete, all as specified & directed by Engineer-in-charge. |
| 45 | M&l fortwo coats of cement base paintincl preperation of old surfaces of walls complete, all as specified & directed by Engineer-in-charge. |
| 46 | M&L for preparation of oldzinc (or galvanised) comoflage pattern surfaces to receive paintng by a coating with moderant solution including washing and cleaning and applying two coat synthetic enamel paint over a coat of zinc crome, red oxide etc complete, all as specified & directed by Engineer-in-charge. |
| 47 | M & L for one coat of synthetic enamel paint inclpreperingold painted steel surfaces of any description not otherwise described over 10 cm width orgirthcomplete, all as specified & directed by Engineer-in-charge. |
| 48 | Taking down wooden chowkats or frames with shutter (without taking off shutter from the frames), area not exceeding 1.5 Sqm each and removal from site including iron mongry hold fasts etc.,complete, all as specified & directed by Engineer-in-charge. . |
| 49 | Taking down wooden chowkats or frames with shutter (without taking off shutter from the frames), areaexceeding 1.5 Sqm and not exceeding 4.00 Sqm each, complete, all as specified & directed by Engineer-in-charge. |
| 50 | Material & Labour 2nd class hardwood factory made 30mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) supplt and fixed to choukats complete all as specified and directed by Engineer-in-Charge at site. |
| 51 | S&F factory fabricated flush shutters, 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete, all as specified & directed by Engineer-in-charge. |
| 52 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete, all as specified & directed by Engineer-in-charge. |
| 53 | Supply & fixed Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6with particle board core raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete, all as specified & directed by Engineer-in-charge. |
| 54 | S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised .complete, all as specified & directed by Engineer-in-charge. |
| 55 | S&F 200mm long aluminium anodised barrel tower bolts of extruded section complete, all as specified & directed by Engineer-in-charge. |
| 56 | Supply & fixing250 mmaluminum anodised sliding door bolts, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete, all as specified & directed by Engineer-in-charge. |
| 57 | S&F butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, 100mm long complete, all as specified & directed by Engineer-in-charge. |
| 58 | S& F Galvanised mildsteel wire cloth 0.56 mmnominal dia of wire and average width of aperature 1.18mm as in gauze door /window/ventilators shutters complete, all as specified & directed by Engineer-in-charge. |
| 59 | M&Lfor two coat of synthetic enemal paint to new wooden surfaces of any description, not otherwise described, over a coat of pink primer, over 10cm width or girth incl preparation of surfaces complete, all as specified & directed by Engineer-in-charge. |
| 60 | S&F powder coated aluminum frame (minimum thickness of powder coating 50 micron) as in frame of door/ window / partitions , etcwith one or more rebates including hinges, handles, jointing cleat for fixing etc. complete, all as specified & directed by Engineer-in-charge. |
| 61 | M&L Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sectionsweighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) .with powder coating of any colour (Thickness or powder coating notless than 50 micron). complete, all as specified & directed by Engineer-in-charge. |
| 62 | Supply andfixing5.5 mm thick tinted glass in square exc 0.5 sqm in each pane with heat reflecting properties , fixed to aluminium frame ordoor with glazing clips, etc., complete all as specified and as directed by the Engineer-in-Charge. |
| 63 | Supply and fixing machine crafted box type cabinet for kitchen using 19mm thickPVC sheet with Single Side Prelaminated and other side plain coloured sheet with and including all necessary fittings and fixtures to install the wire basket, shutters shall be fixed by using full overlay MS clip on hinges high quality nickel plated , satin finishsize 101mm-150mm, 02 Nos per leaf complete, all as specified & directed by Engineer-in-charge. |
| 64 | Supply and fixingwire basket made of top quality 304 grade stainless steel, Nickel chromium plated (Ni 4%) of approved design and pattern complete, all as specified & directed by Engineer-in-charge. |
| 65 | Dismantling posts or struts (wood, steel or R.C.C.) any section, imbedded in concrete including taking out embedded portion and making good disturbed ground complete, all as specified & directed by Engineer-in-charge. |
| 66 | Dismantling wrought iron or mild steel work of any description completely all as specified and directed |
| 67 | Dismantling plain or corrugated steel sheeting any gauge, thickness, including nainital or similar pattern roof covering etc ccomplete, all as specified & directed by Engineer-in-charge. |
| 68 | S&F 0.63 mm thick Galvanised, corrugated mild steel shetting with two corrugations side lap, fixed with coach screws, washers, andL - type orJ-type or cranked hook bolts in lieu of screw in roof sheeting, walls etc. with grade of zinc coating 275 etc complete, all as specified & directed by Engineer-in-charge. |
| 69 | S&F 0.80 mm GI Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 and L-type or J-type or cranked hook bolts in lieu of screw in roofs, walls etc complete, all as specified & directed by Engineer-in-charge. |
| 70 | S&F for Mild steel framed brackets of angles tees flat iron square bars etc cut to shape including bending and welding angles , as necessary gusset plates revitingconformingto Fe.290.Gde-E-165 complete, all as specified & directed by Engineer-in-charge. |
| 71 | M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete, all as specified & directed by Engineer-in-charge. |
| 72 | M&L for preparation of newzinc (or galvanised) comoflage pattern surfaces to receive paintng by a coating with moderant solution including washing and cleaning and applying two coat synthetic enamel paint over a coat of zinc crome, red oxide etc complete, all as specified & directed by Engineer-in-charge. |
| 73 | Demolition of reinforced cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level complete, all as specified & directed by Engineer-in-charge. |
| 74 | M&L for precast RCC 1:2:4 Type B1 using (20 mm graded stone aggregate)Set in CM 1:6 as in landings, cover slabs (for manholesetc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including form work complete, all as specified & directed by Engineer-in-charge. |
| 75 | M&L for TMT mild steelbars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) n.less than 0.9mm diacomplete, all as specified & directed by Engineer-in-charge. |
| 76 | Demolition of cement concrete in floors and pavings n. exc 15 cm thickness below or above ground level, complete complete, all as specified & directed by Engineer-in-charge. |
| 77 | Material and labour for 40 mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floors complete, all as specified & directed by Engineer-in-charge. |
| 78 | Material and labour for 75 mm thick PCC 1:3:6, type C-2 (using 40 mm graded mechanically crushed stone aggregate) as in plinth protection finished surfaces even and smooth without using extra cementcomplete all as specified and directed.complete, all as specified & directed by Engineer-in-charge. |
| 79 | M&L Cement concrete type C-2 (40mm graded stone aggregate) 1:3:6 in foundations, filling and mass concrete complete all as directed by Engr -in- Charge |
| 80 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as perconditions separately) and making good disturbed surfaces of walls, floors, etc. and complete all as specified and as directed by Engineer-in-Charge. |
| 81 | Taking down of MCB DB any type including MCB SP/SPN and making good to existing surface complete all as specified and directed |
| 82 | M&L Point wiring with 1.5 Sqmm (nominal area) copper conductor FRLS cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts drawn through PVC casing and caping of suitable size (as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge.Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws. |
| 83 | (a) One light point controlled by one 5 Amps one way switch |
| 84 | (b) One 3 pin socket outlet 5 Amps on same board |
| 85 | All as per item No 82.00 above but for one 3 pin socket outlet 15 Ampsindependent with cable of size 2.5 Sqmm for point wiring and 1.5 sqmm in continuous earth wire complete all as specified and directed by Engr-in-Charge. |
| 86 | S & F Switch piano flush button single pole one way 5 Amps, 240 Volts complete all as specfied and directed by Engr-in-Charge. |
| 87 | S&F socket outlet 3 pin, 5 Amps, 1 flush type suitable for 2 pin / 3 pin plug complete all as specified and directed by Engir-in-Chage. |
| 88 | S&F switch socket combination 2 in 1, 3 pin, 15 Amps, flush type (multipurpose)complete all as specified and as directed. |
| 89 | S&F Ceiling rose surface backelite ISI marked with 3 terminalincluding connecting and testing complete all as specified and directed by the Engr-in-Charge. |
| 90 | S & F in repair lamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fittings complete all as specified and dirted by the Engr-in-Charge. |
| 91 | S & F in repair PVC rectangular block for mounting of switches, socket with 3 mm thick plastic laminated sheet cover of size 200x150x50mm complete all as specified and dirted by the Engr-in-Charge. |
| 92 | S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unusedway suitable for 8 way complete all as specified and directed. |
| 93 | Supply and fixing 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed. |
| 94 | Supply and fixing MCB SPN240V, 10KA \"C\" curve (40-63) Amp current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed. |
| 95 | Supply and fixingRechargeable LED Bulb energy saver9 W ,B22 (220-240 V) 50 hz, 6500k, fast charging 2200 mAH battery inbuild ,white color complete all as specified and as directed.Make- Phillips stellar bright or equivalent |
| 96 | Supply & Fixing LED light fitting 1X10W bulkhead luminaires including LED light and driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 97 | S&F LED Light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 98 | S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V,50Hz RPM 1200 copper winding of sweep 300m complete all as specified and as directed. |
| 99 | S&F surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver tube light fitting 20W, 4 ft long, 220 Volts , and connecting to ceiling rose with three core twisted flexible copper cable of suitable size complete all as specified and as directed. |
| 100 | M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion complete all as specified and as directed. |
| 101 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete making all necessary connection with suitable capacity of 3 core circular cable complete all as specified and as directed. |
| 102 | M & L for GIPipe (medium grade,ISI Marked) 32 mm dia ,1.5 mtr long ,bend to shape for street light fitting bracket ,with 2x pairs of MS clamps of suitable length of size 40x5 mm of MS flat iron with nuts bolts and washer and taking out old one including connection with street light complete all as specified and as directed. |
| 103 | Taking down the existing cables from trenches of any size complete all as specified and as directed. |
| 104 | Supply, laying,fixing, passing through pipe or laid in trenches and testing underground XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross section area 10 Sqmm x 2 Core cable complete all as specified and as directed. |
| 105 | Excavation in trenches not exceeding 1.5 metre wide and not exc 1.5 metre in depth for foundation of pole / stay, or cable trenches and getting out in hard/dense soil complete all as specified and as directed. |
| 106 | Returning filing in including spreading, leveling watering and well layers n.exc 25 cm width, complete all as specified and as directed. |
| 107 | Removing excavated material n.exec.50m and depositing where directed at level n.exec. 1.5m above the starting point, complete all as specified and as directed. |
| 108 | M & L Sand cushioning to the under ground electric cable 8 cm before laying the cable and 15 cm after laying the cable complete all as specified in clause no 19.75 of SSR Part-I, 2009, complete all as specified and as directed. |
| 109 | M & L for Un-reinforced precast factory made concrete cable covers, class LV Type-I, with flat size 250 x 150 x 40 mm complete all as specified and as directed. |
