|
| 1 | Supply and Fix 18/19mm thick plywood 7 ply with BWR type BB, fixed with adhesive and nails as in cubicle cabin/working table etc of any shape to required size, pattern/design of cabin complete all as specified and as directed by Engineer in Charge. |
| 2 | Supply and Fix 12mm thick plywood 7 ply with BWR type BB, fixed with adhesive and nails as in cubicle cabin/working table etc of any shape to required size, pattern/design of cabin complete all as specified and as directed by Engineer in Charge. |
| 3 | Material and Labour for 0.90mm thick decorative laminate type I of surface finish(colour & pattern as approved) fixed with approved adhesive as per manufacturers instruction finished to approved size for wall panel/cladding of cubical cabin of any shape of any pattern and design etc complete all as specified and asdirected by Engineer in Charge. |
| 4 | Supply and fix Cast brass powder coated automatic lock and release butt hinges of size 100mm complete all as specified and as directed. Make : Asian sleek/Hettich/Godrej |
| 5 | Supply and fix Cast brass powder coated Box type decorative door handle of size 100mm complete all as specified and as directed. |
| 6 | Supply and fix 2nd class hardwood fillets bullnosed, splayed, chamfered or rounded on one edge or face, squares, rectangular or triangular in section exc 6 & n exc 13 sq cm fixed with screws including taking out old fillets complete all as specified and directed. |
| 7 | Material and labour forsecond class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with shine pinned at joints,fixed to wall and making good to wall all as specified and directed. |
| 8 | Material and labourfor two or more coats ofFrench polishing onwooden surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler complete all as specified and as directed. |
| 9 | Supply and fix50 mm size mild steel body Mortice lock, vertical type, with 2 brass liver, fixed to cub board /aluminium door complete all as specified and as directed. |
| 10 | Supply and fix mild steel nickel coated telescopic drawer slider, one inch size, 18 inch long two beam max load capacity 35-40kg suitable for working table, drawer on andy size and any pattern complete all as specified and as directed.Make : Asian sleek/Hettich/Godrej |
| 11 | Supply and fix magnetic door fanlight catch with 14m catch cast brass and fixed approved pattern conforming to IS all as specified and as directed. |
| 12 | Supply and fix 50mm dia PVC cable manger suitable for working table/conference table of any pattern complete all as specified and as directed |
| 13 | Material and labour for seamless Gypsum boardfalse ceiling comprising of Gl frame work with Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including necessary hangers 6mm dia GI adjustable strip suspenders up to 1200mm long fixed to roof slab(using concrete drill) by suitable GI fasten with and including panel for ceiling (12mm thick Gypsum board seamless 1200mmx1800mm size) with self-tapping screw finishing covering the joints with fiber tape and ceiling compound 48 mm wide fibre tape to provide seam less applying two coats of acrylic distemper of approved shade/tint over a coat of primer, over 2 to 3 mm thick wall care putty as specified as ( particular specification 22.1) completely all as specified and as directed.Note: The rate is inclusive of frame work, Gypsumpanel and surface finish nothing extra shall be paid on this account |
| 14 | Dismantling floor, hearth or wall tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and as directed. |
| 15 | Material and labour for providing 25mm thick plain cement concrete 1:2:4 mix type B0, using 12.5mm graded stone aggregate as in under layer to flooringfinished rough to reiceve toping complete all as specified and as directed. |
| 16 | Material and Labour for Non-skid light coloured Ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not excceding 0.18 Sqm, in floors etc, set and jointed in cement mortar and pointed in white or coloured cement to match, laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 17 | Material and Labour for glossy finish coloured vitrified ceramic tiles 8-10 mm thick of area of each tiles not exceeding 0.42 sqm but not exceeding 1.0 Sqm, of any shade of any pattern (pattern consists combination of two or more tiles ) as in vertical surfaces etcjointed in neat cement slurry and pointed in colored cement to match colour tiles over and including 10mm thick screed bed in CM 1:4 and pointed in coloured cement to match coloured tiles complete all as specified and as directed. |
| 18 | Material and Labour for vitrified ceramic tiles 8-10 mm thick dark shade/double charged/ultrachargedarea of each tiles not exceeding 0.42 sqm but not exceeding 1.0 Sqm, of any shade and any pattern (pattern consists combination of two or more tiles ) as in floor etcjointed in neat cement slurry and pointed in colored cement to match colour tiles over and including 15mm thick screed bed in CM 1:6 and pointed in coloured cement to match coloured tiles complete all as specified and as directed.NOTE: No extra cost sahll be allowed for Removing and re-fixing and necessary cutting of door etc if any required during execution of work. |
| 19 | Material and Labour for Vitrified tiles 10mm thick (square/rectangular) light coloured, area of each tile not exceeding 0.36 sqm of any shade and any pattern (Pattern consists combination of two or more tiles ) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed of 15mm thick in CM 1:4 complete all as specified and as directed. |
| 20 | Material and labour for ceramic joint free coloured tiles in vertical surface 600x100/150 mm size of 8 to 10 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10mm thick backing coat in CM 1:4complete complete all as specified and as directed. |
| 21 | Material and Labour for 20mm thick Granite ( of any type) work (table rubbed and polished) including rounding of edges as in kitchen platform, window jambs etc and similar work over and including 15mm thick cement mortar 1:4 including pointing in white cement using marble dust in 1:2 with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 22 | Demolition of brick or stone PCC block masonry built in cement mortar or cement lime mortar including all quoins,arches,pillers etc but excluding ashlar facings,dressed stone work and precast concrete articles in any position complete all as specified and as directed. |
| 23 | Material and labour for precastPCC 1:3:6 using 16 mm graded aggregate solid block masonryexceeding 10 Cm width, built in cement mortar 1:6 all as specified and as directed. |
| 24 | Material and labour for precastPCC 1:3:6 type C1 using 20 mm graded aggregate solid block masonrynot exceeding 10 Cm width(with plain or interlocking joints as directed), built in cement mortar 1:6 all as specified and as directed. |
| 25 | Material and Labourfor TMT(CRS/HCR) bar 10mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping ,for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 26 | Material and labour for TMT bars(CRS/HCR), 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed. |
| 27 | Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams to rough finished surface of concrete for flat complete all as specified and as directed. |
| 28 | M&L for RCC1:2:4 type B1 using 20 mm graded aggregate as in concrete for slab supported walls, landing ,canopies and shalfs all as specified and as directed by engineer in charge |
| 29 | M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in bed block of hold fast etc complete all as specified and as directed. |
| 30 | Demolition of un-reinforced concrete in ground floors, pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 31 | Demolition of cement concretereinforced (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided complete all as specified and as directed. |
| 32 | Taking down cement plastering on concrete or Brick works surface racking out joints, hacking for key , scrubbing down with water etc complete all as specified and as directed. |
| 33 | Material and labour for rendering 15 mm on fair faces of brick or concrete surfaces in CM 1:6, including taking down old cement plaster on any height finished even and fair without using extra cement complete all as specified and directed. |
| 34 | Material and labour for rendering 15 mm on fair faces of brick or concrete surfaces in CM 1:4, finished even and fair without using extra cement complete all as specified and directed. |
| 35 | Material and Labour for rendering 10 mm thick in cement mortar 1: 3 on fair faces of concrete surfaces of ceilingfinished even and smooth with out using extra cement, complete all as specified. |
| 36 | Material and labour for preparation of of new plastered/concrete surfaces of walls by using \"Auto Roller\" and applying two coats ofacrylic distemperof approved shade/tint over a coat of primer,over 2 to 3 mm thick wall care putty finish to achieveuniform smooth surface of wallall as specified and as directed. |
| 37 | Material and labour for preparation of of new plastered/concrete surfaces of ceiling by using \"Auto Roller\" and applying two coats ofacrylic distemperof approved shade/tint over a coat of primer,over 2 to 3 mm thick wall care putty finish to achieveuniform smooth surface of wallall as specified and as directed. |
| 38 | M & L Preparation of old distempered and paintedsurfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on wall surfaces, complete all as specified and directed. |
| 39 | M & L Preparation of old distempered and paintedsurfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on ceiling surfaces, complete all as specified and directed. |
| 40 | Material and labour for applying Twocoats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 41 | Material and labourfor preparation of existing treatment of old surface including brooming down , scrapping down smoke soot,mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall applying one coats of Acrylic emulsion (exterior weather coat) paint of any tint and shade over a coat of primer and over 1 to 2 mm thick birla putty punning as approved complete all as specified and as directed by Engineer-in-Charge.MAke: Apex Ultima |
| 42 | Taking down Chowkats or frames not exceeding 1.5 Sq. M each (without taking off shutters from the frames) complete all as specified and directed. |
| 43 | Taking down Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (without taking off shutters from the frame) complete all as specified and directed. |
| 44 | Providing and fixing Powder coated Aluminium work for doors and Partitions walls with extruded built up standard tubular sections/ appropriate & sections and other sections of approved make fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners for fixing of vertical sections in the ceiling to support the frame including necessary filling up of gaps at junctions, top, bottom and sides with required PVC/ neoprene felt, etc. Aluminium sections shall be smooth, rust free straight, metered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass/ stainless steel screws all complete the direction of engineer-in-charge With powder coated aluminium section of 63.5mm X38.10mm ( sectional weight of the Aluminium section should not be less than 4 Kg. for the sectional length with 12 mm thick both side pre-laminated flat pressed three layer of graded wood particle board conforming to IS: 12823 grade I type II in panelling of partition walls or with float glass panes of 5 mm thickness ( Modi, saint Gobain or equivalent) panelling of required height complete in all respect including all hardware fittings as per the direction of Engineer -in charge |
| 45 | Supply and fix powder coated Aluminium frame for doors, windows and ventilators with one or more rebates including joining cleats for fixing etc.all as specified and directed. (Thickness or powder coating not less than 50 micron) all as specified and as directed. |
| 46 | Supply and fix for aluminium colour powder coated (shade or tint as directed by GE) window frame of three track/fixed using Jindal or equivalent section No 20832 (92 x 31.75 x 1.50 mm) fixed with thrust bolt in walls by drilling and sliding shutter of section No 20844 (40 x 18 x 1.29 mm) or equivalent section for glass including 4.80 mm thick tinted glass fixed with rubber beading and bushes complete in second track and third track with one shutter of wire mesh 0.36 mm dia and 1.40 mm aperture stainless steel wire mesh fixed with screw and aluminium beading complete all as specified and as directed |
| 47 | Supply and Fix PVC door frame size 50mm x 47mm made out of 5mm single sideprelam PVC sheet and edges will be painted to match with prelaminated sheetreinforced with MS square tube supplying& fixing in opening as per specification complete all as specified and directed. |
| 48 | Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, mild steel frame shall be covered with heat moulded plian colour PVC \"C\" channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement supplying and fixing in the frame at site as per specification & drawing of SSR Part II. |
| 49 | Supply and Fix in repairs 100mm hasp and staples,stainless steelincluding bolt to hinges plate and fixed with screws complete all as specified and directed. |
| 50 | Supply and fix in repair stainless steel decorative type door handle of size 100mm complete all as specified and as directed. |
| 51 | Supply and fix in repair stainless steel Butt hinges stainless steel hinge pin and fixed 100mm size complete all as specified and directed. |
| 52 | Supply and fix in repair stainless steelbarrel tower bolt of extruded section of size 150 mm complete all as specified and directed. |
| 53 | Supply and fix in repairs door closer hydraulically regulated cast iron body, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed. |
| 54 | Supply and fixing in repair end knob for curtain rod 25mm dia decorative typefixed with nuts, screws and washers, complete all as specified and as directed. |
| 55 | Supply and fixDecorative curtain rods (304 grade) stainless steel including stainless steel decorative domes of approved pattern/color/design of 25 mm dia complete all as specified and as directed. |
| 56 | Supply and fix in repair Rotational moulded Polyetheylene Water Storage Tank 1000 Ltr capacity Triple Layer (Cylinderical verticle with closed top) including 15mm dia GI Medium Grade 200mm long overflow and wash out pipe each with all required fittings, Checknut, Stopper etc complete hoisted and fixed in position, including taking down existing water tank of 500 to 1000 lts or removing of existing RCC all tank ,including all incoming and outgoing connection of GI pipe complete and including 25mm PTMT Ball valves high pressure wiith epoxy coated aluminium rodand high density plastic ball screwed for iron pipe complete for 15mm dia pipe (Minimum weight 15mm-142 gms/each) fixed on roof top complete all as specified and directed. |
| 57 | Taking up or down steel tubing 15 mm bore including connections, cleaning for refixing or removal to storeall as directed. |
| 58 | Taking up or down steel tubing 20 mm bore including connections, cleaning for refixing or removal to storeall as directed. |
| 59 | Supplying and laying 20 mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings complete all as specified and directed. |
| 60 | Supplying and laying 25 mm inner dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittingscomplete all as specified and directed. |
| 61 | Supply & Fixing in repairs Bib taps, 15mm bore, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.Make: Jaquar/Kohler/Prayag |
| 62 | Supply and fix in repair 15 mm bore two way Bib tap 15mm borecast copper alloy with capstan headsfancy type chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed. Make: Jaquar/Kohler/Prayag |
| 63 | Supply and fix in repairs stop valve, 15mm bore, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.Make: Jaquar/Kohler/Prayag |
| 64 | Supply and Fix in repair stop valves/angle cock, 15mm bore, fancy type, with long shank & cut concealed typechromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.Make: Jaquar/Kohler/Prayag |
| 65 | Supply and fix in repairs vitreous china wash hand basin corner type size 350 x 250 mm white, flat back with and including waste fittings brass chromium plated 32mm with long and fly nuts screwed shank excluding taps all as specified and as directed. Make: Jaquar/Kohler/Prayag |
| 66 | Supply and fix in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 67 | S & Fin repairs stainless steel plate rack of overall size 60 x 90 x 25 Cm made out of 0.8mm thick 304 SS sheet, with shelves and racks to hold kitchen utensils such as plated, tumblers, bowls and cutlery etc with edges of rqacks and shelves turned in, including fixing to wall iwth brass chromium plated screws as directed, plate rack of design and quality as approved and directed.Make: Hindustan/Prayag |
| 68 | Supply and fix stainless steel sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mmx330mmx160mm complete all as specified and directed.Make:Nirali/Blue star/Prayag |
| 69 | Material and labour for Plain cement concrete 1:3:6, type C1, using 20mmgraded stone aggregate as in copings, kneelers, apex stones,bed plates, kerbs, bed block for hold fastincluding necessary form work all as specified and as directed. |
| 70 | Supply and fix in repair 15mm dia pillar tap, cast copper alloy, chromium plated, fancy type, with capstan head screwed down high pressure with or without lettered hot or cold with long screw shank and fly nuttMake: Jaquar/Kohler/Prayag |
| 71 | Supply and fix in repairs 32mm dia low density polyethylene(LDPE) pipes of pressure rating 6.00 kgf/Sqcm including all joints complete all as specified and directed. |
| 72 | Supply only 32mm dia Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed. |
| 73 | Supply and fixing in repairs stainless steel Towel rails of20 mm dia \"D\" type 60 cm long between flanges all as specified and as directed. Make: Jaquar/Kohler/Prayag |
| 74 | Supply and fix in repairs cast iron floor trap 100mm dia outlet with grating including jointing to waste pipe fixed in cement concrete 1:2:4 in type B1 using 20mm graded stone aggregate complete all as specified and as directed. |
| 75 | Supply and fix PVC pipe (SWR) single socketed in any length with rubber ring joint 75mm dia laid in floor or fixed to wall as in soil, waste and rain water pipe complete all as specified and as directed. |
| 76 | Supply and FixPVC (SWR) bends any radius 75mm bore dia with access door complete all as specified and as directed. |
| 77 | Supply and fix PVC (SWR) Tee (single Tee)75mm dia equal or unequal with access door complete all as specified and as directed. |
| 78 | Supply and fix 600x900mm size bevelled edge mirror of silver colour,5.5mm thick, selected quality glass, frameless wall mounted and fixed with chromium plated wall bolting arrangements complete all as specified and directed. |
| 79 | Supply & fix for Looking mirror full size with teak wood frame built and fixed complete all fittings as required directed by Engineer in charge (Size 5\"ht x 2\" wd) |
| 80 | Removing debris / excavated material exceeding 1.5 KM and not exceeding 5K M and depositing outside MD land all as specified and as directed BY Engr-in Charge |
| 81 | Supply and fix lnsulated PVC Wall Lining consisting of PVC Insulated Panels (25mm thick insulated PVC wall lining) having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall of any shape and any colourat any position Each panel have to interlock with each other complet all as per manufactures instruction complete all as specified and asdirected by Engineer in Charge. |
| 82 | Supply and fix Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty all as specified and as directed. |
| 83 | Supply and fixing venetian blind(vertical blind) using nylon fabric of approved colour and size of blind 100mm wide and length as per requirement including powder coated aluminium channel with operating rope etc and making good disturbed surface including removal of old venation blind and its frame complete all as directed. |
| 84 | Material and Labour for point wiring complete using 1.5 Sqmm PVC insulated unsheathed copper conductor, stranded cable (FR) upto and including working voltage 1100volts grade, drawn through and including non metallic rigidPVC conduit not less than 20mm drawn in concealed conduit in wall and open conduiton ceiling including all accessories ISI marked including factory made galvanised modular flush sheet metal enclosure having top bottom side and back wall knock out for conduit entry from any direction suitable to the approved make of switch/socket outlet conforming to IS 14772-2000 and suitable for for cover plates and unsheathed copper conductor stranded cable (FR) earth continuity wire connected to DBs/sunken boxes/fittings of size 1.5 Sqmm Cross sectional area and all other metal parts with earth dolly for the following:-(a) onelight point controlled by one switch 6 Amps |
| 85 | (b ) onefan pointpoint controlled by one switch 6 Amps |
| 86 | (c) One 3pin socket outlet 6 Ampson Independent board |
| 87 | (d ) One 3pin socket outlet 6 Ampsonsame board |
| 88 | All as per Item No. 84 above but with 4 sq mm PVC insulated copper conductor cable(FR) including 4 sq mmPVC copper conductor used as earth wirefor power point on independent board for One 3 pin socket outlet, 15 Amps. |
| 89 | Supply and fix Modular switch one way 6A, 1 Module complete all as specified and as directed. |
| 90 | Supply and fix switch socket outlet, 5 Amps, 3 pin flush type complete all as specified and directed. |
| 91 | Supply and Fix Modular switch socket combination 16 A 6 pin 3 Module complete all as specified and directed. |
| 92 | Supply and fix LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.Make: Havells /Philips/Bajaj. |
| 93 | Supply and fix LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.Make: Havells Cat part No. PLANO2X2PLR42WLED840S or equivalent in Philips/Bajaj/Surya. |
| 94 | Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.Make: Crompton /Philips/Havells |
| 95 | Supply and fix Exhaust Fan of size 300 mm sweep with louvers, with metal body AC 230 V, 50 Hz, 1200 RPMand connecting to ceiling rose terminals with 23/.0076 flexible cable and making good the disturbed surface to match with existing finishes complete all specified and directed. Make: Cat No. Turbojet SP of Havells or equivalent in Usha/Crompton Greaves. |
| 96 | Supply and fixof Ceiling rose in poly carbonate 3 plates flush type 6 Amps, 230 volts AC complete all as specified and directed. |
| 97 | Taking down ceiling fan of any type and size, cable ends, dimantling blades and removing fan and blades to store yard Scraping down old paint of ceiling fan of any size complete body & blade including down rod filling the cavitieswith filler and making smooth surfaceby applying sand paper painting the ceiling fan by meansspray gun/brush with synthetic enamel white paint complete all as specified and directed and Hanging/fixing including provision of cable from ceiling rose or connector to fan all as specified and directed. |
| 98 | Supply and fix MCB SP 6-32 amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of single pole in the MCB DB,IP 20 transparent lebel holder fully insulated safety shutters suitable for cable up to 35 Sqmm cross sectional area complete including suitable size copper Lugs complete all as specified and directed. |
| 99 | Supply and fix MCB SPN, 240Volts, 40 to 63 Amps rating 240 V, breaking capacity of 10 KA, \"C\" Curve complete all specified and as directed. |
| 100 | Supply and fix Distribution board (DB) made out of sheet metal enclosure (CRCA sheet), dust and vermin proof, SPN 8 way with 200 Amps rated copper bus bar double doorprotection, neutral bar,earth bar, single pole and neutral 240 volts, MCBs used as incommerDouble door, flush to wall complete all as specified and directed . |
| 101 | Material and labour for Sub main wiring using two runs of single corePVC insulated cable (FRLS) 6 sqmm copper conductor multi stranded and one run of 6 sqmm copper conductor insulated cable (FRLS)using as earth wire drawn through and including suitable size PVC casing and caping including taking down old aluminium/CopperSub main wirng complete all as specified and directed. Note-3 run of 6 sqmm PVC copper wire and One run of PVC casing caping shall be measured and paid as oneunit. |
| 102 | Earthing with Galvanized steel earth plate electrode of size 600mmX600mm, 6.00 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below the normal ground level with top edge of the plate not less than 1.5m below normal GL and connected to galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized ironsteel all as shown in Electrical Plate No.5 connecting to earthing test point, including necessary earth work in any type of soil, PCC earth chamber made in PCC 1:3:6 type C1 (using 20mm graded aggregate), common salt, charcoal, CI funnel, earth pit cover in RCC 1:2:4 type B1(using 20mm graded aggregates), with 8mm CTD bars @ 100mm c/c in both ways, including necessary form work complete including necessry test on completionincluding taking out old earthing all as specified and as directed. Note : The unit rate shall also include for excavation, earth work in hard/dense soil PCC (1:3:6) type C1 pit, RCC cover slab, GI funnel with 40 mm dia watering pipe, wire mesh, 15mm dia light grade GI protection pipe for earth lead etc., complete |
| 103 | supply of fixing kitchen exhaust hood using 0.8 mm thick S 304 grade stainless steel sheet with 0.5 mmV-baffle oil grease filter including supply and fixing of sufficient exhaust ducting arrangements using 0.6 thick G1 sheet for an area of approximately 500 sqft, along with supply and installation of 2 HP Axial fan with 900 mm sweep, 900 RPM including provision of hanging brackets of size 32 x 32 x 3 mm mild steel angle iron (required Nos) etc. The exhaust hood shall be of size 200 cm x 100 cm (double side ceiling mounted type 1 No) and 200 cm x 100 cm (single side 1 No) complete all as specified and directed.Axial Fan Make: Almonard/ Usha/ Crompton/ Havells |
| 104 | Schedule of Credit (Minus) Rs.9708NOTE der shall insert credit amount of Rs. 9708.00 as ratein Green field under Col-13. |
