Tender For Construction Work Of 06 Shops Within The Limits Of Nagar Palika Parishad - Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge: 2.1.1 All kinds of soil. 2 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level 1:4:8 (1 Cement: 4 coarse sand (zone-III) 8 graded stone aggregate 40 mm (nominal size) 3 Brick work with common burnt clay (non modular) bricks of class-150 in foundation and plinth in:Cement mortar 1:6 (1 cement: 6 coarse sand) 4 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size 5 Back Filling 6 Supplving and filling in plinth with sand under floors. including watering, ramming, consolidating and dressing complete. 7 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to piinth level 1.5.10 (1 cement: 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm (nominal size) 8 Brick work with common burnt clay (non modular) bricks of class-150 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 9 Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm. joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. 10 Providing and fixing angle tron trames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. 11 Providing and laying cement concrete in retaining walls. return walls, walls (anythickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 Cement: 2 coarse sand (zone-III): 4 graded stone aggregate 20 mm (nominal size) 12 Reinforcement WorkI/C all Cutting bending.loading,unloading Binding All Compiete 13 12 mm cement plaster of mix: 14 15 mm cement plaster on rough side of single or half brick wall of mix: 15 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of Ist quality conforming to IS: 15622 of approved make in colours such as White, Ivory. Grey, Fume Red Brown, laid on 20 mm thick cement mortar 14 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.. complete. 16 Colour washing one coat, using approved colourine materials of buff blue, grey or brown shade, including supply of all materials, labour and T & P etc. required for proper completion of the work.over Putti for Two Coats 17 Finishing walls with water proof cement paint of approved make and quality on new work with two coats to give an even shade. Including supply of all material, labour and T & P etc required for proper completion of the work 18 Painting or Vanishing on iron works in small areas or new wood work with one coat of ready mised priming paint & one coat of approved superior ready mixed paint of clear syuthetic varnish including supply of all materials, labour and T & P etc. required for proper completion of work. Paint to be used should confirm to the 1.5.1. No. 103 1950. 19 LS 20 For Electrical Installation 21 For Water And Sanitaton Work
