Tender For As And As To P-194 (Mes Complaint Cell) At Naval Park, Nora Visakhapatnam; 1 Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. 2 Demolition of un-reinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. 3 DemolitionofBrickworkorstone/bouldermasonry, builtincementmortarincludingallquoins,arches, pillars,etc,butexcludingashlarfacings,dressed stonework and precast concrete articles complete all as directed. 4 Taking down chowkhat or frame with shutter n.exc 1.5 Sqm each (without taking off shutters from the frames)complete all as specified and as directed. 5 Excavating in trenches n exc 1.50 m inwidth and n exc 1.50 min depth for foundation, manholes etc as well as n exc 10 sqm on plan areaand getting out in soft/loose soil commplete all as specified and directed. 6 M&L for PCC 1:4:8 , type D-2, using 40mm graded crushed stoneaggregateas in foundation , filling and mass concrete commplete all as specified and directed.. 7 Use and waste of form work to sides of concrete foundations, footings, base of columns,sides and soffits of plinth beams, sides of pile caps and similar work for rough finished surface of concrete complete all as specified and directed. 8 M&L for RCC M-30 (Design mix) using 20mm graded crushed stone aggregate asin foundations, including rafts, footings, foundation beams, plinth beams, foundation for columns, etc complete all as specified and directed.. 9 Use and waste form work to sides pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete complete all as specified and as directed. 10 M&L for RCC M-30 (Design mix) using 20mm graded crushed stone aggregate asin columns,pillars etccomplete all as specified and directed.. 11 Use and waste of form work to soffits of suspended slabs such as roof slabs, n. exc. 20cm thick (horizontal or sloping for fair finished concrete surface complete all as specified and directed. 12 M&L for RCC M-30 (Design mix) using 20mm graded crushed stone aggregate asinslabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and the likeetc complete all as specified and directed. 13 Use and waste offormwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves ,plinth beam including supports, overhangs, etc. also splays between floors and beams, etccomplete all as specified and directed. 14 M&L for RCC M-30 (Design mix) using 20mm graded crushed stone aggregate asinlintels beams and roof beams etc complete all as specified and directed.. 15 Useand waste offormwork to flat surfaces of chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed by Engineer-in-Charge. 16 M&L for reinforced cement concrete M-30 (Design Mix) using 20mm graded stone aggregate as in chajjascomplete all as specified and directed. 17 S&L Salt glazed stone ware drain pipes 150 mm bore, grade A laid in trenches, jointed and tested complete all as specified and directed. 18 M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested complete for 150mm bore pipes complete all as specified and directed 19 S & F high strength corrosion resistant TMT steel bars 10 mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. 20 S&F Mild steel TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed. 21 M&L for hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. 22 M & L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed to a true surface including watering complete all as specified and directed. 23 M & L for 100 mm thick, plain cement concrete 1:4:8,type D-2 (using 40 mm graded stone aggregate)as in sub-base of flooring, finished fair and even complete all as specified and directed by Engineer-in-Charge. 24 M&L for Brick work with subclass ‘B’ old size fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed . 25 M&L for10 mm thick rendering in CM 1:6 onfair face of brick workfinish the surface fair and even without using extra cement complete all as specified and directed by Engineer-in-Charge. 26 M & L for rendering 15 mm thick in two coats (10mm+5mm each) on other than fair faces of brick work or concrete surfaces in cement mortar 1:4,mixed with integral water proofing compoundwith weight of cement in top layer as per manufacturers instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item). 27 Supply only integral water proofing compound (ISI marked) complete all as specified and directed. 28 M&L for preparation of new platered surface of wall and applyingtwo coats of weather proof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre, dart pick up resistant,silicon enhanced,UV resistant and PU enhanced propertyover a coat of alkali resistant primer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfacesincluding all necessary scaffolding,complete all as specified and directed.Note :-Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS 29 Returning, filling in,including spreading, levelling, watering and well ramming in layers not exc. 25cm in soft/loose soil complete all as specified and directed . 30 Removing excavated soil to a distance exc. 5.00 Km but n.exc. 15 Km and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. 31 S&F in repairs 1000 litre capacity ISI marked rotational moulded double layer polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed . 32 Taking up or down 15 mm bore steel tubing and connections, complete all as specified and as directed. 33 S&F 20 mm outer dia ,CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all asspecified and directed. 34 Taking up or down 20 mm bore steel tubing and connections, complete all as specified and directed. 35 S&F 25 mm outer dia ,CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all asspecified and directed. 36 S&F ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms ) complete all as specified and directed. 37 S&F in repairs 15mm bore stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed 38 S&F in repairsPVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engineer-in-Charge. 39 S&F in repairs 10 litre capacity PVC valveless syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including bracketscomplete all as specified and directed. 40 S&F in repairs Vitreous China squatting pan of pattern `long pan, size 580mmX440mm, white with integral foot rests with CI `p or `S trap, front or back inlet (exclusing flushing cistern and flush pipe) but including connection to trap, flush pipe and syphonage pipe etc complete all as specified and directed. 41 Supply and fixing in repair vitreous china (White) wash down water closet pan (pedestal pattern) with P or S trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (White) and mild steel chromium plated or aluminium hinging device complete all as specified and directed by Engr-in-Charge. 42 M & L for non skid ceramic colour tiles 7 to 8 mm thick area of each ile exc. 0.11 Sqm but n.exc. 0.18 Sqm in floors, etc including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. 43 M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, as in vertical surfaces such as skirting etc, including 10 mm thick screed bed in cement mortor 1:4 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. 44 M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. 45 M & L for glazed, coloured, ceramic, tiles of size 450mm x 350mm x 6 to 7 mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. 46 S&F in repair PVC (SWR) floor trap 75mm sizeplain with grating including jointing with solvent cement complete all as specified and directed 47 S & F 75 mm bore, PVC (SWR), in any length with or without ears, with cement joints, laid in trenches or in floors, etc completeall as specified and directed. 48 S & F 110 mm bore, PVC (SWR), in any length with or without ears, with cement joints, laid in trenches or in floors, etc completeall as specified and directed. 49 S&F in repairvitreous China wash basin, size 550 x 400mm, white, flat back, with 32 mm dia PVC waste pipe, CP waste coupling,& backets including cutting for and pinning in ends of brackets but excluding tap complete all as specified and directed. 50 S&F in repairs 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. 51 S&F in repairs 15mm bore bib tap cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge. 52 S&F in repair 600 x 450mm bevelled edge mirror 5.5mm to 6mm thick selected quality glass flaw less,firmly mounted on 6mm thick commercial ply wood backing with Ist class hard wood decorative beadingaboveincluding necessary fixing arrangements complete all as specified and directed by Engr-in-charge. 53 M&L for 75 mm thick Cement concrete 1:3:6 type C1(using 20 mm graded stone aggregate) in plinth protection, and finishing the concrete surface even and smooth without using extra cement including making joints filled with bitumastic filing in proportion of bitumen and sand 1:2 complete all as specified and directed. 54 S&F in repair 150mm long mild steel barrel tower blots, stove enamelled black, with bright bolt complete all as specified. 55 S&F in repair 100mm long SS butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. 56 S&F in repair 150mm long brasspressed handles, oval oval type, stove enamelled black complete all as specified and directed. 57 M&L for Brick work with subclass ‘B’ old size fly ash bricks, straight or curved on plan exc 6m mean radius in half brick thick walls in, built in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.. 58 M&L for preparation new plastered ceiling/soffits of chajjas surfaces and applying three coats of white wash complete all as specified and directed . 59 S&F in repair 150mmx150mm size cast iron gully traps, square or round mouthed, type P with PCC and grating complete all as specified and directed. 60 M & L for brushing neat cement slurry with 3.00 Kg of cement per Sqm complete all as specified and as directed 61 M & L for 10 mm thick, screed bed as in roof in cement mortar 1:3finishing the surfaces even and smooth without using extra cement mixed with water proofing compound as per manufacturers instructions complete all as specified and directed. (Note: WPC shall be measured and paid seperately) 62 Material and labour for preparation of horizontal or vertical surfaces for water proofing treatment on existing cleaned non accessible RCC roof with the following specification and manufacturings instruction complete all as specified and as directed:-(a) Preparing and cleaning of fully dry surfaces as per IS3067-1966(b) Applying bitumen primer(85/25 grade)conforming to IS:3384-1968 over the cleaned plaster surface @ 0.5 Ltr per sqm by the same membrane manufacturer of density at 25°C, 0.87 to 0.89 kg / Liter and viscosity 70-160 cps shall be applied on the prepared surface.(c) Applying a layer of APP based polymeric membrance 3.0mm thick (minimum) weight 3.6Kg per sqm (reinforced) with polyster Non woven fabric weighing not less than 160gms per sqm by torch application.The over laps shall be minimum 100mm on the transverse direction and 75 mm on longitudinal direction. (d) Applying one coat of aluminium paint @0.10 ltr per sqm over APP based polymeric membrane. 63 Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etccomplete all as directed. 64 S&F 110mm bore PVC (SWR) pipes single socketed Soil waste and vent pipes in any length with or without ears with rubber ring joints fixed to walls with stack clamp complete all as specified and directed. 65 S&F 110 mm bore PVC [ SWR ] bends of any radius with access door complete all as specified and as directed. 66 S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators, etc., with one or more rebates including joining cleat for fixing etc., complete all as specified and directed. 67 S&F Anodised aluminiumwith powder coating any colour (minimum thickness of powder coating 50microns) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle(1 no.) complete all as specified and directed 68 S & F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. 69 M&L for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified and directed. 70 M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per sqm of vertical surface, complete all as specified and directed. (Note: Area of the substructure in contact with backfill shall be measured.) 71 M&L for treating the top surface of filled earth at the rate of 5.00 litres of emulsion per sqm of surface complete all as specified and directed. 72 M&L treating the soil along with external perimeter of building at the rate of 2.25 litres of emulsion per metre of the perimeter wall, complete all as specified and directed. 73 M&L treating the soil under plinth protection at the rate of 5.00 litres of emulsion per Sqm, complete all as specified and directed. 74 M & L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in floors, steps, jambs, pillars, window-cills, cooking platforms and like bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick screed bed in cement mortar 1:6 & cutting, polishing complete all as specified and directed. 75 Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth as in brick wall complete all as specified and directed. 76 Cutting of existing 40-50 mm bore steel tubing for alterations or additions (Each cut measured), complete all as specified and as directed 77 Removing building materials etc. (other than spoil)out side MOD landto a distance of 15.00 km or under, beyond the lead, including loading, unloading and stacking at the destination complete all as directed. 78 M&L for5mm thick rendering in CM 1:3 finished even and smooth with out using extra cement in ceilingcomplete all as specified and directed 79 M&L for 25 mm thick PCC 1:2:4 type B0 (Using 12.5mm graded stone aggregate) as in levelling course complete all as specified and directed. 80 M&L for preparation of old decorated wall surface by complete removal of existing treatment, washing, rubbing, stopping etc and applyingtwo coats of oil bound washable distemper over a coat ofprimer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfacescomplete all as specified and as directed.Note :- (i) Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS(ii) Sanding of surfaces shall be done by mechanical sander with 1500-2700 rpm with internal dust extraction system for clean environment certified by the Paint manufacturer) 81 M&L for preparation of old decorated ceiling surface by complete removal of existing treatment, washing, rubbing, stopping etc and applyingtwo coats of oil bound washable distemper over a coat ofprimer including applying one or more coat of putty to a smooth surface including making good any undulations on the surfacescomplete all as specified and as directed. 82 M&L for preparation of old decorated previously treated surfaces ofceiling by brooming down scrapping down smoke and efflorescent etc. completeand applying one coat of white wash complete all as specified and directed. 83 S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full Body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm 2 , modules of elasticity 900 N/mm 2 and resistance to spread of flame of Class A category with water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 84 S&F 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive trength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body hreaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges with S S screws shall be paid separately) complete all as specified and directed. 85 S & F Powder coated (minimum 50 micron) Anodised aluminium door shutters partly paneled and partly glazed,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, inges,anodised aluminum snap beading screws etc. complete all as specified and directed 86 M & L for 12 mm thick, Prelaminated particle board, exterior grade, prelaminated both side with decorative choice laminationfixed with screws to timber/metal frame work complete all as specified and directed. 87 S & F 4.5 mm thick, sheet glass,ordinary quality and glazing with rubber beadingin square exceeding 0.5 Sqm in each pane complete all as specified and as directed. 88 S & F Aluminium (Die cast) body door Closer hydraulically regulated, designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed. 89 S & F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. 90 S&F in repair 110 mm bore PVC [ SWR ] WC connector with lip ringcomplete all as specified and as directed. 91 M&L for preparation of new platered surface of wall and applying two coats of oil bound distemperover a coat ofprimer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfacescomplete all as specified and as directed.Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS 92 S & F Well seasoned 2nd class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. 93 S & F mild steel bands, straps, supports or stays of rain water, ventilating pipes including bolts, hooks (stay) for large gates, hook and pintel hinges, clamps, hold fasts, wall ties, flat iron fillets for securing wire mesh, wind tie, fan hook and similar work including necessary drillingbolting or riveting etc conforming to Fe – 290 Gde E – 165 complete all as specified and as directed. 94 M & L for Preparing surfaces of wood and wood based materials,steel and iron work, new or old,of any description and girth,not otherwise described, and treated with tar or coal tar black paint complete all as specified and directed. 95 S&F 40 mm thick, factory made Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed. 96 S&F 100 mm Butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. 97 S & F 150 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. 98 S & F Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sectionsor cast aluminium alloy, length of bolt of 300 mm complete all as specified and directed. 99 S & F 150 mm size, extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. 100 M & L for plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding holdfast, bed block, cills, etcincluding necessary form work complete all as specified and directed. 101 S&F stainless steel (Grade 316) railing /ballster/handrail made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. 102 Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as directed 103 Taking down unserviceable main switches, DBs, bus bars chambers any capacity including all fittings and fixtures such as MCBs, isolator, etc and removing from site complete all as specified anddirected. 104 Taking down unserviceable sub-main wiring (any numbers of cable) withrigid steelconduits/PVC casing-caping including cutting chases for conduits and making good disturbed surfaces complete all as specified and directed. 105 M & L for conceledPoint wiring with two runs of single core 1.5 Sq.mm. (Nominal area) PVC insulated unsheathed multistranded copper conductor cable FRLSH (ISI marked) drawn through and including non metallic PVC conduit 20 mm bore (Minimum) medium grade (ISI marked) concealed type includingmetal GI boxes of suitable module including modular white cover plate of suitable module for fixing modular type switches, sockets, regulators etc. including provision of multistranded 1.5 Sq.mm copper conductorcable FRLSH [ISI marked] as earth wire connected to common earth dolly and earth in distribution board complete all as specified and as directed,for one light/exhaust fan/fan point/call bellcontrolled by one way switch.(Note.: (i) The rate quoted is deemed to include making good the disturbed sufaces and to match the adjoining surface. (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one) 106 All as per item No.105 above but for One 3/5 pin socket outlet 6 amps on independent board complete ditto 107 All as per item No 105 here in before but for one 15 Amps power point on the independent board with two runs of PVC insulated and unsheathed copper conductor cable of size 2.5 sqmm multistrandedFRLSH (ISI marked) and 2.5 sqmm PVC insulated unsheathed solid copper conductor cableFRLSH (ISI marked) as earth lead complete ditto 108 All as per item No.105 here in before butwith two runs of PVC insulated and unsheathed copper conductor cable of size 4.0 sqmm multistrandedFRLSH (ISI marked) and 4.0 sqmm PVC insulated unsheathed solid copper conductor cableFRLSH (ISI marked) as earth lead complete ditto. 109 S&F Telephonic jack deluxe with shutter single line with metal box complete all as specified and directed. 110 S&F computer /LAN Jack Cat 6 with shutterwith metal box completeall as specified and directed.. 111 S & F switch modular single pole one way 6 amp 240 volts,1 Module complete all as specified and as directed. 112 S & F Modular socket outlet6A, 2/3 pin combined, 2 module, AC 230V, 50HZ complete all as specified and as directed. 113 S & F switch modular single pole one way 16 amp 240 volts,1 Module complete all as specified and as directed. 114 S & F Modular socket outlet6A/16A, 2/3 pin combined, 2 module, AC 230V, 50HZ complete all as specified and as directed. 115 S&F steped type modular fan regulator ,100/120 W 1 module complete all as specified and as directed. 116 S&F ceiling rose, 65 X 50mm two to three terminals, PVC / polycarbonate, insolated body complete all as specified and directed. 117 S&F SP&N enclosure with 2 pole and Earth Metal Plug & Socket with 20 Amps MCB SP cpmplete all as specified and directed(Make : Havells Cat Part No. DHDPUSN020/DHDPUDP020 or equivelant model of make mention in PS) 118 M & L for Sub main wiring with 2 runs of Single core 1.5 sqmm [ for Phase & Neutral ]PVC insulated multi stranded FRLSH (ISI marked) copper cable drawn through and includingconcealed PVC conduit of suitable size (medium grade) with all conduit accesories and fittings along with 1 run of single core 1.5 sqmm PVC insulated multi stranded FRLSH (ISI marked) copper cableas earth continuity conductor complete all as specified and as directed.(Note :- (i) Two runs of 1.5 sqmm and one runs of 1.5 sqmm cable as earth wire and one run of conduitshall be measured as one length, (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one) 119 M & L for Sub main wiring with 2 runs of Single core 4.0 sqmm [ for Phase & Neutral ]PVC insulated multi stranded FRLSH (ISI marked) copper cable drawn through and includingconcealed PVC conduit of suitable size (medium grade) with all conduit accesories and fittings along with 1 run of single core 4.0 sqmm PVC insulated multi stranded FRLSH (ISI marked) copper cableas earth continuity conductor complete all as specified and as directed.(Note :- (i) Two runs of 4.0 sqmm and one runs of 4.0 sqmm cable as earth wire and one run of conduitshall be measured as one length, (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one) 120 S & F Distribution Board, SPN 12 Way, 240V, Double door with IP 43 protection, IK 09complete all as specified and as directed. (Make: Havells cat part No. DHDPSHODRW12 or equivalent make as per List of Manufacturers) 121 S & F in repairs RCBOs,A Type (SPN - 2 M) for ensuring protection from leakage current, short circuit & over load protection 32 Amps ,2 pole, 100 mA , 240 V/415 V, 50 Hz, with 10 kA short circuit capacity conforms to IS 12640-2 & IEC 61009-1 complete all as specified and as directed .(Make: Havells Cat Part No. DHCEACSN2100032 or equivelant of make as per List of Manufacturers) 122 Supply, fixing, commissioning and testing MCB SP 6 to 32 Amps, 240 Volts, 10KA, C Curve,complete all as specified and as directed 123 Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible,copper conductor cable of suitable size from ceiling rose complete,including taking down existing tube light fitting of any type and making good to the disturbed surface to match with existing complete all as specified and as directed 124 Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete,including taking down existing tube light fitting of any type and making good to the disturbed surface to match with existing complete all as specified and as directed 125 Supply and fixing in repair LED building security light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in triple optics complete with IP 66 protection with and including 1.5 sqmm weather proof 3 core FRLH grade copper conductor and 32 mm dia( or higher size as per manufacturers recommendation)light grade GI pipe (bend to shape or as per manufacturers recommendation ) bracket 1.5 mtr longcomplete with MS flat iron clamp (clamps shall be 40 x 5 mm MS flat) nuts, bolts & washers including painting the clamps with two coat of aluminium paint over a coat of red oxide primerand including taking up old light fitting complete all as specified and as directedcomplete all as specified and directed 126 S & F Lamp Holder, PVC/ Polycarbonate type with backplate suitable for batten fitting complete all as specified and as directed. 127 S&F in repairs LED Bulb, 9 Watts Lumen ≥ 900, Luminous afficacy ≥ 100 Lum/Watt, CCT:WW/NW/CW, CRI > 80 Ra,IP 20 rated, overmoulded plastic housing, polycarbonate diffuser, 4KV surge Protection with over voltage protection withstand upto 440 V (for 10 Minute) with open and short circuit protections as per IS: 16102 with all accessories and connecting up with twin core twisted copper conductor cable of suitable size including lamp complete all as specifiedand directed. 128 S & F in repairs Rigid non-metalic PVC conduit (20mmdia) exclusive of boxes (junction/ treminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc. complete all as specified and directed. 129 M & L Earthing complete with GI earth plate electrode 600 mm x 600mm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with the top edge of earth plate at depth not less than 1.5 m below ground level connected with galvanised earth lead of 4.00mm dia by means of bolts, nuts,check nuts and washers protected by 15mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, with 40 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab (reinforced with 8 mm dia deformed bar @ 10 cm C/C both ways and suitable handle of 12 mm dia round bar),including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel, wire mesh, aluminium lugs, complete in all respect all as shown in electrical plate No. 3 and other end connected with main switch board or Earthing test point as directed,including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessarytesting on completion including taking down old onecomplete all as specified and as directed by the Engineer-in-Charge.Note: On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost 130 Supply and laying cable PVC insulated, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 volts grade of size 16 Sqmm 2 core including taking out old one complete all as specified and directed. 131 S & F PVC body Exhaust fan, 250 mm sweep, AC, single phase complete with all accessories and electric connection including making necessary holes in walls including taking down old unserviceable exhaust fan from its existing position and removing to MES store yardcomplete all as specified and directedMake : Havells, Model : Ventil Air DX or equivelant of make as per List of Manufacturers as approved) 132 Supply, fix, installation and commissioning BLDC ceiling fan of less noise, silent operation, speed controlable by regulator, light colour, conforming to IS-374-2019, 1200 mm sweep, 230 Volts, BEE 5 Star rating, any Govt recognised Lab tested, power factor >0.94 Wattage and not more than 35 Watt, air delivery not less than 215cmm alongwith electronic type regulator and all accessories such as down rod etc and connecting up with 1.5 Sqmm, PVC insulated, multistranded copper conductor cables from ceiling rose to fan including taking down old unserviceable exhaust fan from its existing position and removing to MES store yardcomplete all as specified and directed. (Note: Ceiling fan should have minimum 2 years manufacturers warranty) 133 Supply and fixing vertical electric water heater, storage type, shock resistant ABS body,high quality steel inner tank with glasslined Coated with high density PUF insulation, fitted With specially designed acrificial magnesium anode to prevent corrosion due to hard water,100% copper heating element upto 2 KW, 230 volts, capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV,4 nos fixing bolt of suitable size including nuts and washer etc,2 nos PVC connection pipe and making the electrical connection with and including 16A Plug Top including testing after installation complete all as specified and directed.Make:- Crompton , Havells, Racold , Bajaj,V-Guard Note : Contractor Shall submit manufacturer test report as per BIS to GE before payment. 134 Supply , installation and commissioning of Water Cooler Fully Stainless Steel , 5 star rating ,electric driven single phase having approx storage capacity 80 litand nominal cooling capacity as 40 Ltrs/Hrcomplete all as specified and directedMake : Blue Star model no SDLX4080Bor equivalent model of Usha,Voltas 135 S & F voltage stabilizer of capacity 2.0 kVA for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 Vto 250 V with output voltage stabilized at 230 Vwith accuracy of ± 2.5% complete all as specified and directed
