Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 23-06-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-06-2025 |
| 2 | 16-06-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 23-06-2025 |
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) of following size complete all as specified and directed:- |
| 2 | Area not exc 1.5 sqm each |
| 3 | Area exc 1.5 sqm but not exc 4 sqm each |
| 4 | Taking down shutters of any description, of following size complete all as specified and directed:- |
| 5 | Area exc 1.0 sqm but not exc 2.0 sqm each |
| 6 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows and other frames/ chowkhat of following size comprising of virgin PVC polymer having K-value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) and 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and direction. Note: (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable andvariation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.(ii) M.S. hold fast/ lugs or SS dash fasteners shall be measured and paid for separately. |
| 7 | 65mm x100mm size |
| 8 | 65mm x 125mm size |
| 9 | M&L for 30mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter comprising of virgin polymer of K-value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws complete all as specified and directed.Note: stainless steel butt hinges and necessary stainless steel screws shall be paid separately. |
| 10 | S&F 30mm thick moulded WPC (Wood Polymer Composite)wire mesh factory made 1005 decorative type, moulded,panel door shutter prepare to receive Mesh, gauze etc (single or two panel Including wire mesh(confirming as per IS: 4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10mm deep mould on single side with wood grain texture and back side plain with density not less than 600kg/cum manufactured by an ISO : 9001-2015 certified company.The door should be water proof, termite proof, fire retardent and having screw holding capacity complete all as specified and directed.Note: stainless steel butt hinges and necessary stainless steel screws shall be paid separately. |
| 11 | S&F 35mm thick factory made plain framed, panelled door shutters (two panel) of IInd class hard wood rail and styles with lock rail and panel of 9 mm BWP commercial ply. The size of rail and style as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified. |
| 12 | S&F 35mm thick factory made second class hard wood glazed and skelton door shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note :- Size of member of shutters as specified in SSR Part-I (2009) section 8 clause 8.20 (a). |
| 13 | M&L for twocoats of synthetic enamel paint over a coat of pink primer including preparation of new wood or wooden base surface over 10cm width or grith complete all as specified and directed. |
| 14 | S&F MS butt hinge, medium weight, cold rolled and fixed of following size complete all as specified and directed:- |
| 15 | 100 mm long |
| 16 | S&F powder coated aluminium sliding door bolt with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of following size complete all as specified and directed:- |
| 17 | 250mm long |
| 18 | S&F anodised aluminium barrel tower bolts (ISI marked) of extruded section of following size complete all as directed and specified:- |
| 19 | 150 mm long |
| 20 | S&F extruded aluminium alloy handles, fabricated type, anodised (ISI marked) of following size complete all as directed and specified:- |
| 21 | 150 mm long |
| 22 | S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and directed. |
| 23 | S&F Windows & Ventilator made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Shutter brackets with a inbuilt pvc lip to be fixed in a way that the lip overlaps the shutter corners and are not exposed .High quality handles 2nos of heavy-duty stain less steel pivot hinges shall be provided per shutter. The windows should be panelled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self-expanding, screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete all as specified and directed. |
| 24 | Dismantling of wall and ceilingboards ( fibre, pulp insulation etc.) or insulation boards/ slabs/ blankets of any thickness, including cover fillets complete all as specified and directed. |
| 25 | S&F False Ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm With Semi perforated 12mm thick micro tegular edged or 1 0 mmthick square edgedof approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of85% (minimum) to be laid in truehorizontal level suspended on inter locking metal T-Grid of hot dippedgalvanized iron section of 0.33mm thick(galvanized @ 120 grams per sqmincluding both sides) comprising of main T runners of size 15 x 32 mm of length3000mm,cross-T of size 15x 32mm oflength 1200mm and secondary intermediate cross-T of size 15 x 32 mmof length 600mm to form grid module of size 600x 600mm , suspended fromceiling using galvanized mild steel items(galvanizing @ 80 grams per sqm) i.e50mm long, 8mm outer diameter M-6dash fasteners, 6mm dia fully threadedhanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm.Galvanised iron perimeter wall angle ofsize 24x 24x0.40mm of length 3000 mmto be fixed on periphery wall I partitionwith the help of plastic rawl plugs at 450mm center to center and 40mm long drywall wood screws. complte all as specified and directed. |
| 26 | S&F forE-boards, ceiling, 4 mm thick with J framed work with mainTee of size 24 x 28.5 mm made out of PGI sheet .3 mm thick double at web and single at flange, flange coverd with powder coated sheet 0.25 mm thick and wall angle 24 x 24 x .45 mm powder coated for ceiling , ceiling boards 60cm x 60cmx 4mmthick , suspended with GI wire 2mm dia and 2m average length with adjustable hanging device complete including plugging in brick/stone walls with steel rawl plug @ 600 mm C/C Ceiling board shall be pressed to the ceiling tee with staple clips at all four sides and painted with two coats of oil bound distemper incl making good all the disturbed portion complete all as specified and directed. |
| 27 | S&F 5 mm thick Prelam PVCsheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and as directed. |
| 28 | S& F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed. |
| 29 | S&F in repairs for stainless steel non magnetic curtain rod of 25mm dia with and including fixing brackets and decorative type knobs (as approved by AGE (I)/ GE both side of each rod complete all as specified and directed.Note: - Measurement will be taken between end point of knobs. |
| 30 | S&F GI Mosquito Net wire 2mm dia including all fixing arrangement in wall at ends complete all as specified and directed |
| 31 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 32 | M&L for brick work with old size full bricksubclass ‘B’ burnt clay bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed. |
| 33 | M & L in Repairoverhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finishand making the edge water-dropping grooves complete all as specified and directed.Note:1.Height of work to be consideredupto 7m from FFL of Ground Floor. 2.Cost of formwork shall be deemed to be included.3.Reinforcement required to be provided will be paid separately under relevant item. |
| 34 | M & L for repair to sunken floor by provide water proofing treatment to sunken floor surfaces of RCC slabby the following specifications as specified and directed :-(a) Provide PCC (1:1.5:3) type A0 with using 12.5mm graded stone aggregate in slope of average thickness 50mm on sunken floor slab mixed with and including integral water proofing compoundmanufactured by Dr FIXIT or equivalent as approved, finish the surface even & smooth without using extra cement. (b) Rendering 15mm thick in CM 1:3 mixed with & including integral water proofing compound on sunken floor and sides of (Vertical surface) sunken portion.(c) Applying surfaces of bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm complete. oncomplete sunken surfaces of floor & wall and provide necessary connections to soil/waste pipe from WC/ nahani trap etc including demolition of old sunken complete all as specified and as directed. (d) Applying a tack coat of Industrial bitumen grade of 85/25 @ of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane). (Note : Floor Area shall be measured for payment). |
| 35 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to storeand rubbish off the premises from MoD land complete all as specified and as directed. |
| 36 | M&L for coloured glazed ceramic coloured tiles of any design and pattern, 300x450x 7 to 8mmthick, as in dado etc including 15mm thick rendering in CM (1:4), set and jointed in neat cement slurry and pointed in white of coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, Group B III with average water absorption between 10% to 15%. Length, width and straightness of sides + 0.20% (Max deviation). Thickness + 4.0% (Max deviation). Straightness of sides and Rectangularity +0.15% (Max Deviation). surface flatness + 0.22% (Max deviation). Breaking strength 500 N (Minimum) and minimum 95% tiles shall be free from visible defects complete all as specified and directed.Note: Shade of the tiles including Colour, design and pattern shall be got approved by AGE(I) |
| 37 | M&L for non skid, joint free, coloured ceramic tiles7-8mm thick (Square/Rectunglar), as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles laid with and including over 15mm thick screed bed in CM (1:4), area of each tiles shall be of following complete all as specified and directed :- |
| 38 | Area of each tile exc 0.11 Sqm but not exc 0.18 Sqm. |
| 39 | M&L for scratch & Jointfree Glazed(Porcelain) Vitrified Tiles(GVT)/Polished Glazed Vitrified Tiles(PGVT) 9mm-10mm thick (square or rectangular) area of each tile exceeding 0.36sqmbut not exceeding 0.72 sqm ie size 600 x 1200mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layerin CM 1:6 complete all as specified and directed.Note : 1.Size and pattern/texture of GVT(Matt Finish)/PGVT(Glossy Finish) must be decide by Engr in charge2.Glazed Coating on GVT/PGVT must not be less than 1mm. |
| 40 | All as per Item No. 29 but in skirting/vertical surface including 10 mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 41 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed inany mortar and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 42 | M&L for mirror polished machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror finish polishing over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directedNote:- The size of kota stone slab not less than 550mmx550mm (cut size except the location where balanced.) |
| 43 | Description same all as per item No 32 above but, as in skirting/ dado (18-20 mm thick Kota stone) over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed. |
| 44 | M&L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in floor,wall, steps, jambs, pillars, window-cills, cooking platforms, WHB counter and like bedded over and including 20 mm thick screed bed in CM (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 45 | M&Lfor 18-20 mm thick Makrana White Marble tiles machine cut of width size minimum 100 mm width of any lengthlaid over and including 20mm thick screed bed in CM 1:6 & cement mixed with pigment to match the shade of slab , jointed and pointed with grey cement slurry including cutting and polishing complete all as specified& directed. |
| 46 | M&L for 60mm thick coloured rubber moulded glossy finish machine pressed precast concrete interlocking paver block,M-35 Grade with pre-polished, coloured/ laquar finish any shape and size, as approved confirming to IS 15658-2006 with and including over 50 mm thick stone dust/ sand cushining complete all as specified and directed. |
| 47 | M&L for rubber moulded coloured glossy finish chequered cement concrete tiles, ISI Marked, set and jointed and pointed in neat cement slurry with grey cement and pigment in floors over and including 15mm thick screed bed in cement mortar (1:6) for following size of tile complete all as specified and as directed:- |
| 48 | 30cm x 30cm x 30 mm thick |
| 49 | M&L Forgrinding and polishingof Kota Stone complete all as specified& directed. |
| 50 | Demolition of PCC in ground floorand pavings not exc 15 cm thickness below or above ground levelincluding removal of rubbish out side MOD land complete all as specified and directed. |
| 51 | M&L for 25 mm thick PCC (1:2:4) type B0(12.5 mm graded stone agg) as in sub floor of flooring complete all as specified and directed. |
| 52 | M&L for 100 mm thick PCC (1:4:8) type D2, (40 mm graded stone agg) as in sub base of floor complete all as specified and directed. |
| 53 | M&L for 75mm thick PCC (1:3:6), type C-2 using 40mm graded stone aggregate as in plinth protection, surface finished even & smooth without using extra cement, with and including joint filling (Size 30mm deep x 10mm wide) with sealing compound grade-A at 3m interwal and corner complete all as specified and directed.Note : Joint to be provided at each interval of 3m and corner and cost of the same deemed included in quoted rate. |
| 54 | Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water and removing unseviceable materials out side MoD land complete all as specified and as directed. |
| 55 | M&L for 10mm thick rendering on fair faces of brick work or concrete surface in cement plaster (1:6) finished the surface even and fair complete all as specified and directed. |
| 56 | M&L for 15mm thick plastering on fair faces of brick wall in two layers, Ist layer 10mm thick CM (1:6), and IInd layer 5mm thick CM (1:4), surface finished even and fair mixed with @ 200ml per bag WPC (liquid type) complete all as specified and directed.Note :- WPC (Liquid type) shall be measured and paid separately as supply only. |
| 57 | Supply only WPC integral water proofing compound (Liquid type) complete all as specified and directed. |
| 58 | M&L preparation of newly plastered surface of External wall by application of 1mm thick wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 59 | M&L for preparation of newly plastered surface of interior wall by application of 1 mm thick wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying two coats of acrylic distemper over a coat of primer of same make all as specified and prescribed by manufacture of paint/ distemper, by using roller/ spray machine complete all as specied and directed. |
| 60 | M & L for preparation of old surface of internal walland applying two coats of oil emulsion distemperoverputty (if required) make the surface even and smooth of all as specified and prescribed by manufacturer of paint and all as directed. Note- Putty shall be measured and paid seperately. |
| 61 | M & L for preparation of old surface of external wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqmover one coat ofputty (if required) complete all as directed. Note- Putty shall be measured and paid seperately. |
| 62 | M&L for preparation of old decorated surfaces of wall by removing existingputty/distemper till plaster level and applyingtwo coat of Sureseal by Dr Fixit or equivalent and subsequent application of 2 Coat of Oil Emulsion Distemper over a coat of 2 mm Acrylic/WaterProofing Wall Putty(each Coat not less than 2mm).Note-1.Apply first coat of Sureseal by Dr Fixit or equivalent(no dilution)& allow it to dry for 6-8 hrs.2.Apply 2nd Coat of Sureseal by Dr Fixit or equivalent(no dilution) perpendicular to first coat & allow it to dry for 6-8 hrs.3.The work of Sureseal or equivalent treatment shall be got executed through expert team of manufacturers or authorised applicator of manufacturer and quantity of Sureseal or equivalent will be dedided by expert team as per site requirement. 4. Putty and Oil Emulsion Distemper Shall be measured and Paid Seperately under Relevent item |
| 63 | M&L for preparation of old decorated surfaces of wall by removing existing exterior acrylic emulsion painttill plaster level and applyingtwo coat of Rain Coat Neo By Dr Fixit or equivalent over a coat of 2 mm Acrylic/WaterProofing Wall Putty(each Coat not less than 2mm).Note-1.Apply first coat of RainCoat Neo or equivalentand allow it to dry for 6-8 hrs.2.Apply 2nd Coat of RainCoat Neo or equivalentperpendicular to first coat & allow it to dry for 6-8 hrs.3.The work of RainCoat Neoor equivalenttreatment shall be got executed through expert team of manufacturers or authorised applicator of manufacturer and quantity of Raincoat Neo or equivalentwill be dedided by expert team as per site requirement. 4.Shade/Colour/Texture of Raincoat Neo or equivalentwill be decided By Engr in Charge 5. Putty & exterior acrylic emulsion paint Shall be measured and Paid Seperately under Relevent item |
| 64 | M&L for 2mm thickAcrylic/WaterProofing Wall Putty in two coats (each coat not less than 1mm) and surface finished even and smooth with sand paper completeall as specified and directed |
| 65 | Dismantling of timber scantling 40 sqcm and over in section, in any position as in unframed work complete all as specified and as directed. |
| 66 | Dismantling of asbestos cement ( corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 67 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness in roof coverings complete all as specified and directed. |
| 68 | S&F Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa, AZ-150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 69 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, AZ-150 as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 70 | M&L infor MS steelwork in tubular trusses, purlins, rafter, tubuler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-4923,1997 complete all as specified and as directed. |
| 71 | S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and or riveted or forged into spikes, framed, barred iron door, ladders, fencing work ect. conforming to Fe-290 Gde E-165 complete all as specified and directed.Note: The unit rate quoted by contractor is deemed to be inclusive of cutting to dead lenth where required, notching, drilling, fitting, rivetting and/or welding or connecting with bolts and nuts (including rivets or bolt and nuts), providing and fiitings angle cleats, fish plates, gusset plate etc., also for welding plumbing, truing up and fixing complete. No claim whatso ever shall be entertained by Govt on this account. |
| 72 | M&L for twocoats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10cm width or grith complete all as specified and directed. |
| 73 | M&L for preparation of old painted surface of steel material of any description over 10 cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified and as directed. |
| 74 | S & F aluminium butylwater proof tape of width size minimum 100 mm width of any any length of flexible butyl rubber compound in fixing/tapping in roof sheet/concrete surface any height complete all specified and as directed. |
| 75 | S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches/ floor or fixed to wall of following size complete all as specified and as directed :- |
| 76 | 110 mm bore |
| 77 | 75 mm bore |
| 78 | S&F in repair PVC (SWR) multi floor trap, out let dia 75mm, plain with grating including jointing with solventcomplete all as specified and as directed. |
| 79 | S&F in repair PVC (SWR) junction single, (single T) with access door equal or unequal of following size complete all as specified and as directed :- |
| 80 | 110 mm bore |
| 81 | 75 mm bore |
| 82 | S&F in repair PVC (SWR) bends any radius including necessary cutting in brick wall and making good to match with existing surface of following size complete all as specified and as directed :- |
| 83 | 110 mm bore |
| 84 | 75 mm bore |
| 85 | S&F in repair PVC (SWR) vent cowl of following size complete all as specified and as directed :- |
| 86 | 110 mm bore |
| 87 | S&F rotational moulded polyethylene water storage tank, double layer construction, ISI mark (cylindrical vertical with closed top) hoisted and fixed in position with and including 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings, of following capacity of tank completeall as specified and as directed:- |
| 88 | Capacity 1000 Ltrs |
| 89 | S&F in repair vitreous china squatting pan of “Orissa” pattern of size 580 mmx 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and as directed. |
| 90 | S&F in repair vitreous china wash down water closet pan (pedestal pattern), coloured, with and including plastic water closet seat cover, coloured, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, ( excluding fixing bolts, flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe, etc., completeall as specified and directed. |
| 91 | S & F in repairs vitreous china wash basin white (oval shaped under counter) of size560 x 410 x 180 mm including 32mm brass CP waste coupling complete all as specified and as directed . |
| 92 | S&F in repair vitreous china half stall urinal complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed. |
| 93 | S&F in repair PVC valveless, symphonic action type low level flushing cistern white with inlet ball valve, float and handle including brackets, 10 ltr capacity complete with flush pipe(Long bend) 32mm dia of make as approvrd by GE complete all as specified & directed. |
| 94 | S&F in repairPVC connection 15 mm size with PTMT nut of following length complete all as specified and directed :- |
| 95 | 450mm |
| 96 | Taking up or down steel water tubing (GI Pipe) and connections of following bore complete all as specified and as directed :- |
| 97 | 15mm bore |
| 98 | 20mm bore |
| 99 | S&F galvanised steel water tubing (GI pipe), medium grade with all fittings (ISI Marked) and fixed to wall, floor and ceiling or laid in trenches of following bore complete all as specified and as directed :- |
| 100 | 15mm bore |
| 101 | 20mm bore |
| 102 | S&F in repair 15mm borepillar taps, cast copperalloy, with capstan heads, chromium plated, Fancy type screwed down for pipe, high pressure , with or without l\"ettered \" \"HOT\" or \"COLD\" with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified and directed. |
| 103 | S&F in repair 15 mm bore bib taps, chromium plated, fancy type, long body, cast copper alloy with crutch handle, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed . |
| 104 | S&F in repair fancy type chromium plated 15mm boretwo way Bib cock cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified and as directed. |
| 105 | S&F in repairs 15mm bore Stop valves (angular stop cock), cast copper alloy, fancy type, chromium plated with long shank and cupscrewed down high pressure with crutch or butterfly handleor concealed screwed both ends for iron pipe or for unions complete all as specified and directed.Note for all CP item :- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site. |
| 106 | S&F in repair chromium plated health fauset, telephonic type with CP flexible arms and hooks of approved make suitable to fix to 15mm bore CP angle valve complete all as specified and directed. |
| 107 | S&F in repairs Chromium plated shower rose 100 mm size with or without swivel joints, any size, including fixing to15mm GI pipe or union complete all as specified and directed. |
| 108 | S&F in repair wall mixer with L bend for over head shower incl shower rose of size 125 mm and shower arm chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15mm borepipes including taking down existing bib tap complete all as specified and directed. |
| 109 | S&F in repair 15mm dia chromium plated central hole wash hand basin mixer without PWS with 450mm BRAIDED HOUSE hosescrewed down high pressure screwed for iron pipe including taking down existing bib tapcompleted all as specified and directed . |
| 110 | S&F 6 mm thick Frameless beveled edge mirror of selected quality glassfixed with CP screw and CP washer and other required fixing arrangement complete all as specified and directed.Note- .Size/Shape of Mirror will be decided by Engr in Charge. |
| 111 | S&F in repair chromium plated brass tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified and directed. |
| 112 | S & F Steel Sheet High Quality Grade in Crumple Joint including all fixing arrangementcomplete all as specified and directed. |
| 113 | M&L PCC 1:2:4 type B-0 (using 12.5 mm graded stone agg)as in roof padding to receive roof treatment including demolition of cement concrete (unreinforced) in roof/terraceincluding existing roof treatment of any description complete all as specified and directed. |
| 114 | M&L for rendering 15 mm thick in cement mortar 1:4on roof surface including mixed with WPC as per manufacturer\"s instruction\"s and finishing the surfaces even and smooth without using extra cementcomplete all as specified and directed.Note :- WPC shall be measured and paid for separately as supply only under respective item of sch \"A\". |
| 115 | M&L for taking down/dismantling of existing roof treatment of any description and laying water proofing treatment to non-accessibleroof slabwith APP based modified polymeric membrane as per manufacturer’s instructions including with following course of description below :- (a)Applying a priming coat of bituminious primer @ 0.30 Kg /Sqm, till the surface is properly impregnated.(b) Providing APP based 3 layer polymeric membrane minimum weighing 3 .0Kg/ Sqm and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gms/sqm) centre core, laid on primed surface by forced applications as per the manufacturer\"s instructions with side over lap of 75 mm and end overlap of 100 mm. All overlap joints shall be sealed thoroughly by thermo fusing both the membrane layer (torching overlap by propane or butane gas torch ) and sealing it with the help of hot trowel. The overlap joints shall be made as a monolithic layer(c) Apply two coat of bituminous aluminium paint @ 0.20 Kg/Sqm over APP membranceNote : 1. The work of water proofing treatment shall be got executed through authorised applicator of the manufacturer only and 10 year company back warranty to be submitted by contractor 2. The work is required to be carried out at non-accessibleroof slab for double storeyed.The contractor shall make arrangement of scaffolding, safety and security of workers and arrangement for approach to roof . The rates quoted shall deemed to be included for these items.) |
| 116 | Excavating in trenches n\"exc 1.5 m width and n\"exc 1.5 m in depth for foundation or for shafts, well cesspits, manholes etc / for laying of cable/ pipe etc n\"exc 10 sqm on plan and n\"exc 1.5 m in depth and getting out in soft/ disintegrated rock complete all as specified and directed. |
| 117 | Demolition and breaking up drain pipes (PVC/ SGSW/ AC/ RCC pipe) of following bore of pipe, set in cement mortar complete all as specified and as directed:- |
| 118 | 150mm bore |
| 119 | M&L concrete bed to pipes in PCC (1:3:6) type C2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid on slope and tested for following bore sewer pipe line complete all as specified and directed :- |
| 120 | 150mm bore |
| 121 | M&L for salt glazed stone ware (SGSW) pipe, grade A, ISI marked, laid in trenches and jointed in CM (1:1) for following bore of pipe complete all as specified and directed :- |
| 122 | 150mm bore |
| 123 | M&L for precast RCC (1:2:4) type B1, (using 20mm graded stone aggregates) as in cover slab (for manholes) and set in CM (1:4) including necessary fair finish formwork complete all as specified and directed. |
| 124 | M&L for RCC (1:2:4) Nominal mix (using 20mm graded stone aggregates) as in floor/ roof beam, cantilevers, lintel over 1.5m span complete all as specified and directed. |
| 125 | M&L for formwork for rough finish to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etccomplete all as specified and directed. |
| 126 | M&L for mild steel TMT bars as in reinforcement, 10mm dia and over cut to length, bent to shape required including cranking, bending hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 127 | M&L for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming complete and all as specified and directed. |
| 128 | M&L for PCC (1:3:6) Type C2 (40 mm graded aggregate) as in foundations, filling and mass-concretecomplete all as specified and directed. |
| 129 | M&L for PCC (1:2:4) type B-1, using 20mm graded stone aggregates, as in kerb/ benching/ coping, bed plates, for fixing of hold fast,water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed. |
| 130 | M&L forwindow Roller vertical Blind/Curtain of PVC/Vinyl Material having water resistant feature manually operated (Chain Driven System with spring loaded for smooth rolling) including all necessary fixing arrangement of Roller Tube and Bracketscomplete all as specified and directed. |
| 131 | Dismantling and taking down old unserviceablepoint wiring of any type (light, fan, socket, power etc) complete with fitting such as switches, sockets, ceiling roses, pendants, lamp holders, light fitting etc including CI/ pressed steel terminals, switch box and making good the disturbed surface of wall/ floor etc to match with the existing surfaces of wall/ floor complete all as specified and directed.Note :- (i) If the contractor fail to make good the disturbed surface of wall/ floor etc and do not match with the existing surface of wall/ floor to the entire satisfaction of Engr-in-Charge, a recovery of @ Rs. 50/- per RM will be made from payment due to the Contractor. In case of any dispute, the decision of Accepting Officer will be final and binding.(ii) Old fittings/ fixtures / accessories like switches, sockets, lamp holders, regulators etc., if found in serviceable condition shall be removed carefully for reuse in the work or taking on charge. (iii) Only old unserviceable items will be considered in credit Sch. |
| 132 | M&L for point wiring with 1100 volts grade single core conforming to (IS:694 /1990) PVC insulated unsheathed 1.5 Sqmm multi stranded copper conductor cable (FRLSH) with continious earth wire of 1.5 Sqmm stranded copper conductor cable (FRLSH) PVC insulated unsheathed, drawn in and including concealed PVC conduit \"medium grade\" (ISI marked), not less than 20mm dia duly concealed on wall/ ceiling or above false ceiling with fittings medium grade (Color coding of wires shall be phase, neutral and earth wire all as specified) sunk metal flush box suitable for modular fixture with and including decorative polycarbonate frame for housing modular switches, sockets, fan regulators etc including white cover plate complete all as specified and directed for following:-Note:- (i) Cost of cutting chases of suitable girth where required on brick /concrete surface and making good disturbed surface in CM (1:3) and matching with the existing surface deemed included in quoted rates. (ii)If the contractor fail to make good the disturbed surface of wall/ ceiling etc and do not match with the existing surface of wall/ceiling to the entire satisfaction of Engr-in-Charge a recovery of @ Rs. 50/- per RM will be made from payment due to the contractor. In case of any dispute the decision of Accepting Officer will be final and binding. |
| 133 | One light/fan/exhaust fan/call bell point controlled by one way 5 Amp switch. |
| 134 | One 3 pin socket out let 5/6 Amp on independent board. |
| 135 | One 3 pin socket out let 5/6 Amp on same board. |
| 136 | One light point controlled by two way 5 Amp switch. |
| 137 | Descrition same all as per item No 105 above, but with 2.5 Sqmm PVC insulated FRLSH cable for 15 Amps power point complete all as specified & directed. |
| 138 | S&F modular switch piano, 1module, flush type button 5/6 Amp single pole one way conforming to IS: 3854 and ISI marked complete all as specified and directed. |
| 139 | S&F modular switch piano, 1module, flush type button 15/16 Amp single pole one way conforming to IS: 3854 and ISI marked complete all as specified and directed. |
| 140 | S&F modular socket outlet, 2 module, five pin 2 in 1, 5 Amps, flush type, 230 volts AC circuit complete all as specifiedand directed. |
| 141 | S&F modular socket outlet, 2 module, five pin 2 in1, 15 Amps, flush type, 230 volts AC circuit complete all as specifiedand directed. |
| 142 | S&F modular switch piano, 1module, flush type button 5/6 Amp single pole two way conforming to IS: 3854 and ISI marked complete all as specified and directed. |
| 143 | S&F modular switch bell push button type, 1module,6 Amp single pole complete all as specified and as directed. |
| 144 | S&F ceiling rose surface bakelite 65 x 25mm dia three terminals (ISI Marked) complete all as specified and directed. |
| 145 | S&F bell electric DING DONG type,AC, 230V single pole, 2module complete all as specified and as directed. |
| 146 | S&F angle Lamp holder (with metal ring), insulated body, of PVC/ Polycorbonate with back plate (ISI Marked) suitable for batten fitting complete all as specified and as directed. |
| 147 | S&F MCB DB SPN 8 way, 240 volts in sheet steel enclosure.double door type including taking down old DB complete all as specified and directed. |
| 148 | S&F MCB DB TPN 4 way with 200 Amps 415 volts rated copper busbarin sheet steel enclosure.double door type including taking down old DB complete all as specified and directed. |
| 149 | S&F MCB , SP, AC, 240 volts of 06 to 32Amps capacity 10KA, \"C\" series and making connections with suitable size of copper lugs complete all as specified & directed. |
| 150 | S&F MCB, SPN, AC, 240 volts of 40 Amps capacity 10KA, \"C\" series and making connections with suitable size of copper lugs complete all as specified & directed. |
| 151 | S&F MCB, TPN, AC, 415 volts of 63 Amps capacity 10KA, \"C\" series and making connections with suitable size of copper lugs complete all as specified & directed. |
| 152 | S& F surface mounted LED luminiare, 10 watt, 2 Feet mirror light with all accessories having aluminumextruded channel with diffuser for glare free light, high lumen output, driver PF >0.90 having over voltage protection upto 400 voltsand lumen efficiency >120 lumen per watt, internally pre-wired through flexible wire connecting with ceiling rose all as directed. |
| 153 | S& F surface mounted LED luminiare, 20 watt, 4 Feet with all accessories having aluminumextruded channel with diffuser for glare free light, high lumen output, driver PF >0.90 having over voltage protection upto 400 voltsand lumen efficiency >120 lumen per watt, internally pre-wired through flexible wire connecting with ceiling rose all as directed. |
| 154 | S & F LED Bulb 10 Watt (cool day light) having colour temp 6500 K and lumen output 950 suitable for \"B-22 type to fix on batten holder complete all as specified and directed. |
| 155 | S&F LED building security light 1 x 20W housing made out of pressure die-cast aluminium alloy with toughned glass, IP 66 protection working on 240 volts, 50 Hz, consisting of reflecting lamps wired with appropriate driver PF> 0.98 having overvoltage protection upto 440 volt, surge protection level > 10 KV, thermal short circuit protection THD< 10% made up of long life LED chip (SMD) in modular with Ra< 70, and LED lumen efficiency > 140 lumen per watt, beam angle along the drive way, 120 degree, beam angle across the drive way, 80 degree luminaire efficiency> 120 luminous /watt power LED should be of more than 01 watt CCT should be between 5700° K- 6500 K including fixing on existing bracket including making necessary electric connection with 1.5 Sqmm, 3 core, PVC insulated copperconductor cable 1100 Volt grade complete all as specified and as directed. |
| 156 | S&F sub main wiring alongwith earth wire (green colour) with single core FRLSH,PVC insulated, unsheathed stranded copper conductor cable of voltage rating upto and including 1100 Volts drawn in and including concealed PVC conduit (medium grade) with standard accessories and earth wire connected with main earth dolly, of the following sizes of cable & dia of conduit complete all as specified and directed:-NOTE :- (i) Two/four run of single core FRLSH PVC cable with one/two run of earth conductor and conduit shall be measured as one unit (RM). (ii)The quoted rates shall be deemedto be inclusive for cutting chases in wall/pillars/columns etc of any description for concealing the conduits to required depth & making good the disturbed surface in CM (1:3) including finishing the surface to match with the existing surface.The portion of sub main wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawal plugs. |
| 157 | 2x6 Sqmm+ 1x6 Sqmm earth wire with PVC conduit 20mm dia |
| 158 | 2x4 Sqmm+ 1x4 Sqmm earth wire with PVC conduit 20mm dia or more |
| 159 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground, earth pit not less than 2.25 mtr depth below ground level at any type of strata with top edge of the earth plate not less than 1.5mtr below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all around the plate, connected by 4 mm GI wire as earth lead by means of brass nuts and bolt, thimbles check nuts, washers including concrete chamber of PCC (1:3:6) type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given internal dia 300mm x300mm, 15mm thick plaster in CM (1:4) funnel with wire mesh, RCC pit cover of 320 x 320 x 80mm size PCC (1:2:4) Type B1 using 20mm graded stone aggregate rainforced with XPM all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI wire upto 7.5 mtrs long with 15 mm dia light grade GI pipe protection and watering pipe of GI 20 mm bore, medium grade, including all exavation and earth work and connecting the earthing wire to panel, including testing on completion complete all as specified and directed. Note:- (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick reinforced with XPM weighing not less than 4kg/sqm in lieu of CI cover.(ii) Cost of additional GI wire more than 7.5 mtrs will be measured and paid seperately under relevant items. |
| 160 | S&F exhaust fansteel body with louver shutter, heavy duty, AC, single phase, 230 V, copper winding of size 300 mm sweep, 900 RPM and connecting up including provision of cable from ceiling rose/ connector to exhaust fan complete all as specified and directed. |
| 161 | S&F exhaust fansteel body with louver shutter, heavy duty, AC, single phase, 230 V, copper winding of size 450 mm sweep, 900 RPM and connecting up including provision of cable from ceiling rose/ connector to exhaust fan complete all as specified and directed. |
| 162 | S&F Water heater storage type water heater (Geyser) capacity 25 litres BEE 5 star rated including grouting the nut bolts - 04 Nos, PVC Connection Pipe - 02 Nos, Chromium plated Stop Cock 15mm - 02 Nos, bib tap- 01 Nos and necesssary GI pipe etc all complete all as specified and directed. Note:- Old Geyser deposit at MES Store Yard. |
| 163 | S&F recessed mounted LED light fitting 36 watt, 230V, 2\"x2\", with diffused acrylic cover with all accessories having high lumen output, driver PF>0.98 having over voltage protection upto 400 V, ISI marked square lit panel 2x2 LED luminaire with diffuser 3 core with flexible copper cable PVC insulated of size 1.5 Sqmm complete fixing on existing false ceiling/ POP ceiling/ Armstrong ceiling/ Grid ceiling and required cutting of any type of ceiling to fix the light and making good as peer existing ceiling included on quoted rates, necessary T&P like hydraulic ladders or normal ladders for fixing height upto 4.5 mtrs arranged by contractor on own arrangement is included on quoted rate the light id to be fixed on buildings like Auditorium, Arty mess Gym, Officer transit mess etc complete all as specified and directed |
| 164 | S&F earth continuity conductor or main earthing lead fixed to walls or to poles or any other indicated situation for loop earthing with using 4mm dia GI earth wire complete all as specified and directed. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
