Tender For Comprehensive Maintenance Of Temp Buildings At Khundru Under Ge 861 Ews; 1 Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store complete all as specified and directed. 2 Demolition of cement concrete (unreinforced) in ground floors & paving n.exc15 cm thick (below or above ground level) complete all as specified and directed. 3 Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.5 sqm complete all as specified and directed. 4 Taking down chowkhat or frame with shutters (without taking shutter from the frame) exceeding 1.5sqm and not exceeding 4.00 sqm each complete all as specified and directed. 5 Taking down of shutter any description area exceeding 1 sqm but not exceeding 2 sqm each complete all as specified and directed. 6 Dismantling wall and ceiling boards (fibre, Pulp, insulation etc) or insulation board/slabs/blankets, any thickness, including cover fillets & snap grid frame etc, complete all as specified and directed. 7 Dismantling timber scantling framed work 40 sq cm and over in section in any position, complete all as specified and directed. 8 Dismantlingplain or corrugated steel sheeting , any gauge and thickness,including Nainital or similar pattern roof coverings, complete all as specified and directed. 9 Taking down Shutter and refixing in the same 0peningof any description in same opening exc 1 Sqm and n.exc 2 sqm complete all as specified and directed. 10 Taking up or down 15mm bore steel tubing and connection, including cleaning for refixing or removal from site, complete all as specified and directed. 11 Taking up or down 20mm bore steel tubing and connection, including cleaning for refixing or removal from site, complete all as specified and directed. 12 Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all asspecified and directed. 13 M & L for 400x400mm Non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular)in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed. 14 M & L for 400x400mm Non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular)as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 to receive tiles complete all as specified and directed. 15 M & L for Glazed ceramic coloured tiles 450mm x 300mm x 6mm thick as in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry,pointed in white or coloured cement to matchover and including 10mm thick renderingin cement mortar 1:4 to receive tiles,complete all as specified and directed. 16 M & L for Non-skidcoloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.18 sqm but not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed. 17 M&Lfor chequered cement concrete tiles30cm x30cmx25mm thick(glossy finished) withgrey cement and pigment, set, jointed and pointed in neat cement slurry in floors laid over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. 18 M & L for wooden flooring 8 to 10 mm thick with dovetailed joints laid over 150 micron polythene film and 3 mm thick foam as per manufacturers instructions, and fixed with decorative wooden beadings as per site requirement, complete all as specified and directed. 19 M&L for 50mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub-floor, sub-base, floor and pavings, etc., complete all as specified and directed. 20 M&L for 75mm thick plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate finished even and smooth without using extra cement as in plinth protection complete all as specified and directed. 21 M & L for Factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown in SSR Part-II, complete all as specified and directed. 22 M & L for Factory made solidpanel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVCchannel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rails and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to in stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in frames at site as per specification and drawing shown in SSR Part -II, complete all as specified and directed. 23 M & L for 35mm thick, 2nd class softwood factory made, plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneers on both faces. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkhats, complete all as specified and directed. 24 M & L for 35mm thick, 2nd class softwood factory made glazed and skeleton shutters,open rebated and prepared to receive glass or gauge etc. (without sash bars) edges offraming plain, chamfered or rounded, fitted with cut &mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-ISection-8,clause 8.24 (a) for door shutter supplying and fitted to chowkhats, complete all as specified and directed. 25 M & L for 2nd class softwood, plain, solid, straight chowkhats and frames, wrought, framed, wrought, framed rebated on the solid, rounded of chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. 26 S&F 6mm thick plywood, grade BWR, type BB, fixed in ceiling flat and sloping with nails to timber frame, complete all as specified and directed. 27 S&F 6mm thick plywood, grade BWR, type BB, fixed in walls with nails to timber frame, complete all as specified and directed. 28 S&F 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in ceiling flat and sloping with nails to timber frame, complete all as specified and directed. 29 S&F 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in walls with nails to timber frame, complete all as specified and directed. 30 S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. 31 S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. 32 M & L for 2nd class softwood, as in scantling and similar work, clean sawn, timber fixed in position, complete all as specified and directed. 33 All as per the description of item No. 32 here-in- before but except timber complete all as specified and directed. 34 M & L for 2nd class softwood plain fillets square/rectangular or triangular in section of sectional area exc 13 Sqcm but n exc 25 Sqcm, complete all as specified and directed. 35 M & L for 2nd class softwood plain fillets bull nosed splayed chamfered or rounded on one edge or face in section of sectional area exc 3 Sqcm but n exc 6 Sqcm complete all as specified and directed. 36 M & L for 2nd class softwood plain fillets bull nosed splayed chamfered or rounded on one edge or face in section of sectional area n.exc 3 Sqcmcomplete all as specified and directed. 37 S&F Powder Coated Anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. 38 S&F Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos including 5.5 mm thick tinted sheet glass ordinary quality in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified. 39 S&F Pre-painted galvalume aluminium zinc coating GIbased corrugated steel sheet 0.50 mm thick of anycolour having tensile strength of 550 Mps as in roof covering /cladding to wall, fixed with self tapping screws as specified and directed. 40 S & F Pre-painted galvalume aluminium zinc coating GIbased plain steel sheet 0.50 mm thick of anycolour having tensile strength of 550 Mps as in roof covering /cladding to wall, fixed with self tapping screws as specified and directed. 41 M & L for Steel water tubing, 15mm bore, galvanised, medium grade with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed. 42 All as per the description of item No. 41 here-in- before but except tubing complete all as specified and directed. 43 M & L for Steel water tubing, 20mm bore, galvanised, medium grade with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed. 44 S & F 250mm size mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed. 45 S & F 150mm long mild steelbarrel tower bolts, stove enamelled black, with bright bolts fixed, complete all as specified and directed. 46 S & F 100mm long mild steelbarrel tower bolts, stove enamelled black, with bright bolts fixed, complete all as specified and directed. 47 S & F 150mm long, mild steel pressed handles, oval type, stove enamelled black, complete all as specified and directed. 48 S & F 100mm long, mild steel pressed handles, oval type, stove enamelled black, complete all as specified and directed. 49 S & F 100mm long, mild steel cold rolled butt hinges, medium weight, complete all as specified and directed. 50 S & F 75mm long, mild steel cold rolled butt hinges, medium weight, complete all as specified and directed. 51 M & L for 3mm thick sheet glass ordinary quality, and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed. 52 M & L for 3mm thick figured glass pin headed typeand glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane complete all as specified and directed. 53 M & L for Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm & fixed with stainless steel wire staples, complete all as specified and directed. 54 M & L for Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm & fixed with stainless steel wire staples (fixed in repair), complete all as specified and directed. 55 Hoisting & Fixing for Rotational moulded polyethylene 500 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20mm brass ball valve high pressure with brass rod & high density plastic ball including dismantling of existing tank, complete all asspecified and directed. 56 Hoisting & Fixing for Rotational moulded polyethylene 1000 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20mm brass ball valve high pressure with brass rod & high density plastic ball including dismantling of existing tank, complete all asspecified and directed. 57 S&F in repairs vitreous china squatting pan water closet, Orissa pattern, size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) but including PVC (SWR) P trap 110mm bore jointing to flush pipe complete and making good to floor in cement concrete M-5 (1:5;10), type E-2 using 40mm graded crushed stone aggregate, complete all as specified and directed. 58 S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including P or S trap, seat cover and fixing bolts, flushing cistern and flush pipe & making good to floor in cement concrete (1:2:4) type B-1 nominal mix (using 20mm graded crushed stone aggregated), complete all as specified and as directed. 59 S&F in repair 10 litre capacity PVC valve less, low level, synphonic action type, flushing cistern, with inlet, ball valve, float valve, handle including brackets,complete all as specified and directed. 60 S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm,complete all as specified and directed. 61 S & Fin repair 15mm bore bib tap, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, complete all as specified and directed. 62 S&F in repairs 15mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. 63 S&F in repair 15 mm borebrass CP mixer for mixing hot and cold waterscrewed down for iron pipe and fixed, complete all as specified and directed. 64 M & L for Preparation of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. 65 S & F in repair 110mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls, complete all as specified and directed. 66 S & F in repair 75mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls, complete all as specified and directed. 67 S & F in repair 110mm bore dia PVC (SWR) bends, complete all as specified and directed. 68 S & F in repair 75mm bore dia PVC (SWR) bends, complete all as specified and directed. 69 S&F framed work such as grills and gratings etc with ends of bars shouldered and /or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, Water staging etc complete all as specified and directed. 70 S& F Floor door stopper of aluminium alloy bodyand tongue, anodised, with hard drawnsteel spring , fixed in floor overall length of cover plate140mm complete all as specified and directed. 71 S&F in repairstainless steel Curtain/drapery rod 20 mm dia as approved colour/design in one length with clamps, ring, ball shaped knobs at both end complete all as specified and directed. 72 M & L for Preparation of old surfaces of walls, plastered or unplastered including brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on wall, complete all as specified and directed. 73 All as per item No 71 above but applying one coat of white or tinted oil bound distemper on wall, complete all as specified and directed. 74 All as per item No 71 above but applying one coat of cement based paint on wall, complete all as specified and directed. 75 M & L for Preparation of old painted wooden surfaces of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. 76 M & L for Preparation of old painted GI/steel surfaces of any description not otherwise described over 10cm width or girth as in roof and applying one coat of synthetic enamel paint specified and directed. 77 Taking down cement plaster on brick/stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. 78 M & L for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished the surface even and smooth without using extra cement complete all as specified and directed. 79 M & L for Preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint over a coat of alkali-resistant priming coat, complete all as specified and directed. 80 M & L for writing letters or figures (Block, Roman, Italic or Indian) n exc. 30 cm high complete all as specified and directed. 81 Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including unscrewing from board fitting and fixturesuch as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody for reuse if serviceable or for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. 82 M&L for Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable maintaining colour coding (Phase- Red/yellow/Blue, Neutral- Black) and 1.5 sqmm PVCinsulated unsheathed copper conductor single core cable (green colour) as earth lead in and including PVC casing and capping/Conduit mediumgrade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size or PVC Gang Box with 3 mm thick plastic laminated sheet cover of adequate size for one light point/fan point controlled by one switch and making good disturbed surfaces with CM (1:3) to match with the existing surface, complete all as specifiedand directed. 83 All as per srl item No-82 here in above but for one 3 pin 5A socket outlet independent controlled by one switch, complete all as specified and directed. 84 All as per srl item No-82 here in above but for one 5A socket outlet on the same board controlled by one switch, complete all as specified and directed. 85 All as per serial item No 82 here-in-before but for 3 pin 15 Amps socket outlet independent board with 2.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 Sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green color) as earth lead, complete all as specified and directed. 86 M&L for Concealed Point wiring complete with 1.5 sqmm 1100 graded PVC FRLS (Multi strand) insulated unsheathed copper conductor single core multi strand flexible cable maintaining colour coding (Phase- Red/yellow/Blue, Neutral- Black), PVC conduit not less than 20mm dia concealed, including cutting chases, finishing of slots by means of cement mortar 1:3 making good to existing surface of the wall and touching with three coats ofexisting colour of wall and making good disturbed surface complete sunk in pressed steel terminal boxes of required size not less than 1.6mm thick factory made and factory painted with top cover 3mm thick plastic laminated sheet fixed with brass screw and washers with all accessories including single core multi stranded copper conductor 1.5 sqmm size cable (green colour) as earth continuity wire connected to common earth dolly to modular concealed box and white cover plate of required nos and required sizefor housing switches, sockets etc for one light / fan/ bell point controlled by one switch one way and making good disturbed surfaces with CM (1:3) to match with the existing surface, complete all as specifiedand directed. 87 All as per srl item No-86 here in above but for one 3 pin 5A socket outlet independent controlled by one switch, complete all as specifiedand directed. 88 All as per srl item No-86 here in above but for one 5A socket outlet on the same board controlled by one switch, complete all as specifiedand directed. 89 All as per srl item No-86 here in above but for one 3 pin 15 Amps socket outlet independentwith 2.5 sqmm PVCinsulated unsheathed copper conductor single core multi strand flexible cable and 2.5 Sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green color) as earth lead, complete all as specifiedand directed. 90 S&F Ceiling rose 3 terminal bakelite 65mm x50mm surface type, PVC/ Polycarbonate, isolated body, complete all as specified and directed. 91 S&F Switch piano flush button types 6 Amp, single pole, one way complete all as specified and directed. 92 S&F Switch socket combination 2 in 1, 3 pin, 5 Amp flush type, universal, complete all as specified and directed. 93 S&F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp, flush type universal, complete all as specified and directed. 94 S&F Lamp holder, PVC/ Polycarbonate type with back plate, straight/ angular suitable for batten fittings, complete all as specified and directed. 95 S&F Bell push, flush type, 5 Amp, complete all as specified and directed. 96 S&F in repair of Call bell , ding dong AC single phase, 230 volts 50 Hz including wooden/ PVC board of suitable size, connecting and testing, complete all as specified and directed. 97 S&F Fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically all as required at site or directed. 98 S&F in repair of Modular switch 1 way 6A,1 module all as specified and directed by EIC. Make: Anchor/Roma/Legrand/ goldmedal 99 S&F in repair of Modular switch 1 way 16A,1 module all as specified and directed by EIC. Make: Anchor/ Roma/ Legrand/ goldmedal 100 S&F in repair of Modular socket, 6A - 2/3 pin combined 2 modules all as specified and directed. 101 S&F in repair of Modular socket 6/16A, 2/3 pin, combined 2 module all as specified and directed. 102 S&F in repair of Modular fan step regulator, 120W - 2 modular all as specified and directed. 103 S&F in repair of White cover plate with frame, 2 module all as specified and directed. 104 S&F in repair of White cover plate with frame, 4 module all as specified and directed. 105 S&F in repair of White cover plate with frame, 6 module all as specified and directed. 106 Supply and fixing in repair, Plug top 3 pin 5/6 amps 230 volts, complete all as specified and directed. 107 Supply and fixing in repair Plug top 3 pin 15/16 amps 230 volts, complete all as specified and directed. 108 Supply & fixing in repair PVC Gang box surface type suitable for fixing of 5 pin 5 Amp multipurpose switch socket on wall complete all as specified and directed. 109 Supply & fixing in repair PVC Gang box surface type suitable for fixing of 5 pin 15 Amp multipurpose switch socket on wall complete all as specified and directed. 110 Supply and fixing in repair LED 9 watt pin type bulb, complete all as specified and directed. 111 S&F LED light fitting 1 x 10 Watt,2 long lighting fixture with extruded Al heat sink , environment friendly , energy efficient ready to use packincludingLED tube complete with inbuilt electronic driver , PCB , connector block etc including connecting up with threecore twisted flexible copper conductor cable with suitable size LED tube including taking out old, complete all as specified and directed. 112 S&F LED light fitting 1 x 18 Watt,4 long lighting fixture with extruded Al heat sink , environment friendly , energy efficient ready to use packincludingLED tube complete with inbuilt electronic driver , PCB , connector block etc including connecting up with threecore twisted flexible copper conductor cable with suitable size LED tube including taking out old, complete all as specified and directed. 113 S&F in repair of LED light fitting 1 x 18 Watt,4 long lighting fixture with extruded Aluminium heat sink , environment friendly , energy efficient ready to use packincludingLED tube complete with inbuilt electronic driver , PCB , connector block etc including connecting up with threecore twisted flexible copper conductor cable with suitable size LED tube including taking out old, complete all as specified and directed. 114 S&F in repair of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. 115 S&F in repair LED light fitting 12 watt 220 volts AC round shape/ square shape recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. 116 Supply & fixing in repair MCB Distribution board , 240 volts single pole andneutral , double door, sheet steel, enclosure powder coated with 200 Amps rated copper busbar with neutral link, 4 ways, IP-43 protection, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection and making good disturbed surfaces of walls etc, including two coats of white/colour washing/distempering etc to match the existing surface, complete all as specified and directed. 117 Supply & fixing in repair MCB Distribution board , 240 volts single pole andneutral , double door, sheet steel, enclosure powder coated with 200 Amps rated copper busbar with neutral link, 8 ways, IP-43 protection, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection and making good disturbed surfaces of walls etc, including two coats of white/colour washing/distempering etc to match the existing surface, complete all as specified and directed. 118 Supply & fixing in repair MCB distribution board , 240 volts single pole andneutral , double door, sheet steel, enclosure powder coated with 200 Amps rated copper busbar with neutral link, 12 ways, IP-43 protection, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection and making good disturbed surfaces of walls etc, including two coats of white/colour washing/distempering etc to match the existing surface, complete all as specified and directed. 119 S&F in repair of double door type vertical type TPN DB 4 Way , 415Vwith 200A busbar, with metalic double door type IP 43 IK 09 protectionsuitable for housing MCCBs all as specified and directed.NOTE :- DBs shall be concealed in wall where ever possible including making good the surface to match with surrounding. 120 MCCB FP 63 Amps, 16KA,415 volt, complete all as specified and directed. 121 Supply & fixing in replacement of for MCB single pole 240 volts, B curve of rating 6 amps as per site requirement , with rupturing capacity 10 KA as per IS-8828-1996 (IEC-60898), biconnect upper and lower terminals, integrated label holder to ensure circuit identification, complete all as specified and directed. 122 Supply & fixing in replacement of for MCB single pole 240 volts, B curve of rating 10 amps as per site requirement , with rupturing capacity 10 KA as per IS-8828-1996 (IEC-60898), biconnect upper and lower terminals , integrated label holder to ensure circuit identification, complete all as specified and directed. 123 Supply & fixing in replacement of for MCB single pole 240 volts, B curve of rating 16 amps as per site requirement , with rupturing capacity 10 KA as per IS-8828-1996 (IEC-60898), biconnect upper and lower terminals , integrated label holder to ensure circuit identification, complete all as specified and directed. 124 Supply & fixing in replacement of for MCB single pole 240 volts, B curve of rating 25 amps, as per site requirement , with rupturing capacity 10 KA as per IS-8828-1996 (IEC-60898), biconnect upper and lower terminals , integrated label holder to ensure circuit identification, complete all as specified and directed. 125 Supply & fixing in replacement of MCB single pole & neutral (SPN) 32 Amps 240 Volts, C curve,with rupturing capacity 10 KA, complete as specified and directed. 126 Supply & fixing in replacement of MCB single pole & neutral (SPN) 40 Amps 240 Volts with rupturing capacity 10 KA, complete as specified and directed. 127 Supply & fixing in replacement of MCB TPN 415 volts, 40Amps C Curve 10 kA capacity, complete all as specified and directed. 128 Sub main wiring with two singlecore PVC insulated flexible copper conductor cable of size 2x 1.5 sqmm + 1x 1.5 sqmm and one single core PVCinsulated flexible copper conductor cable green colour of size 1.5 sqmm as earth lead in & includingPVC casing capping medium grade2mm thickness ISI markedincl taking down old unserviceable, complete all as required at site or directed.Note: 3 runs of wire and one run of PVC casing capping shal be measured as one unit for payment purpose. 129 Sub main wiring with two singlecore PVC insulated flexible copper conductor cable of size 2x 2.5 sqmm + 1x 2.5 sqmm and one single core PVCinsulated flexible copper conductor cable green colour of size 2.5 sqmm as earth lead in & includingPVC casing capping medium grade2mm thickness ISI markedincl taking down old unserviceable, complete all as required at site or directed.Note: 3 runs of wire and one run of PVC casing capping shal be measured as one unit for payment purpose. 130 Sub main wiring with two singlecore PVC insulated flexible copper conductor cable of size 2x 4.0 sqmm + 1x 4.0sqmm and one single core PVCinsulated flexible copper conductor cable green colour of size 4.0 sqmm as earth lead in & includingPVC casing capping medium grade2mm thickness ISI markedincl taking down old unserviceable, complete all as required at site or directed.Note: 3 runs of wire and one run of PVC casing capping shal be measured as one unit for payment purpose. 131 Sub main wiring with two singlecore PVC insulated flexible copper conductor cable of size 2x 6.0 sqmm + 1x 6.0sqmm and one single core PVCinsulated flexible copper conductor cable green colour of size 6.0 sqmm as earth lead in & includingPVC casing capping medium grade2mm thickness ISI markedincl taking down old unserviceable, complete all as required at site or directed.Note: 3 runs of wire and one run of PVC casing capping shal be measured as one unit for payment purpose. 132 Supply and laying in repair service cable 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed 16 sqmm 2 Core nominal cross section complete all as specified and directed. 133 Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded copper conductor of size 16 sq mm 4 core. laid in trench/ duct / along pole/wall etc including making connection complete all as directed. Note : The cost of thimbles/lugs and cable gland etc is including in quoted rate and no extra payment will be made for it. 134 Supply & fix in repair medium gradePVC casing and cappingof size 20 mm dia, exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc, complete all as specified and directed. 135 Disconnecting, taking down, strip opening, cleaning all parts and packing of exhaust fan of any make and size & greasing ball bearing with specified quality grease & recommissioning the same including making new electric flexible wire connection, complete all as specified and directed. NOTE: Replacement of spare parts, rewinding, painting etc to be measured and paid separately. 136 M&L for disconnecting, taking down, strip opening, cleaning all parts and packing of ceiling fan of any make and size & greasing ball bearing with specified quality grease & recommissioning the same including making new electric flexible wire connection, complete all as specified and directed. NOTE: Replacement of spare parts, rewinding, painting etc to be measured and paid separately. 137 M&L for replacement of short circuit/over-heated windings from starter of ceiling fan of any make having 1200/1400mm sweep with matching gauge & turns of super enamelled copper winding wire complete with leathered paper, glass sleeves, varnishing, baking, heating, drying, cleaning fan bearing/bushes, greasing, oiling and reassembling of fan with testing etc, complete all as specified and directed. 138 M&L for replacement of short circuit/over-heated windings from starter of exhaust fan of any make having 300mm/350mm/450mm sweep with matching guage & turns of super enamelled copper winding wire complete with leathered paper, glass sleeves, varnishing, baking, heating, drying, cleaning fan bearing/bushes, greasing, oiling and reassembling of fan with testing etc, complete all as specified and directed. 139 M&L for replacement of gun metal bush with suitable size for ceiling fan any make, any size and any sweep, complete all as specified and directed. 140 M&L replacement of ball bearing suitable for 1200mm/1400mm sweep ceiling fan of any size any make, complete all as specified and directed. 141 M&L replacement of approved quality connector block of ceiling fans of suitable size, complete all as specified and directed. 142 M&L replacement of capacitor 2.5 mfdAC 230 volts 50 Hz, complete all as specified and directed. 143 M&L replacement of ball bearing suitable for 300mm/450mm sweep exhaust fan, complete all as specified and directed. 144 M&L replacement of capacitor 3.15 mfdAC 230 volts 50 Hz, complete all as specified and directed. 145 Taking down water storage heater of capacity 25/35/50 ltr from the site and opening base plate assembly and removing all sludge and scaling from the inner tank and refixing the base plate assembly with and including minor spares such rubber gasket, piece of wire etc, complete all as specified and directed. 146 M&L Heating element AC 230 Volt of rating 1500W ISI mark as per existing any type, complete all as specified and directed. 147 M&L Heating element AC 230 Volt of rating 2000W ISI mark as per existing any type, complete all as specified and directed. 148 M&L Thermostat switch AC 230 Volt adjustable range from 0-90 degree Celsius, complete all as specified and directed. 149 M&L replacement of flexible PVC connection pipe heavy duty suitable for hot waterto bear the temperature 100 degree Celsius without let and inlet connection brass adaptor and PVC washer having size 450 mm long 15 mm nominal dia complete all as specified and directed. 150 M&L replacement of auto-cut switch suitable for geyser 25-50 ltrs 230 volts AC all as per sample, complete all as specified and directed. 151 S&F in repair inner tank assembly made of copper suitable for 25 ltr storage type water heaterwith and including nuts, bolts and washer and fusible plug, complete all as specified and directed. 152 S&F in repair inner tank assembly made of copper suitable for 35 ltr storage type water heaterwith and including nuts, bolts and washer and fusible plug, complete all as specified and directed. 153 S&F in repair inner tank assembly made of copper suitable for 50 ltr storage type water heaterwith and including nuts, bolts and washer and fusible plug, complete all as specified and directed. 154 S&F in repair glass woolfor insulation purpose in any make and any capacity storage type water heater complete all as specified and directed. 155 S&F in repair outer body including upper and lower cover and inspection plate made of MS sheet duly painted with super enamelled synthetic paint over a coat of steel primer suitable for 25 Ltr storage type water heater, complete all as specified and directed. 156 S&F in repair outer body including upper and lower cover and inspection plate made of MS sheet duly painted with super enamelled synthetic paint over a coat of steel primer suitable for 35 Ltr storage type water heater, complete all as specified and directed. 157 S&F in repair outer body including upper and lower cover and inspection plate made of MS sheet duly painted with super enamelled synthetic paint over a coat of steel primer suitable for 50 Ltr storage type water heater, complete all as specified and directed. 158 S&F in repair three core cable 1100 volt grade having size 40/0.0076 copper conductor multi stranded, complete all as specified and directed.
