}

Demolishing Unauthorized Structures And Construction Barricade Under Chetla Lock Gate Bridge., Kolkata-West Bengal

Kolkata Metropolitan Development Authority has published Demolishing Unauthorized Structures And Construction Barricade Under Chetla Lock Gate Bridge.. Submission Date for this Tender is 13-06-2025. Demolition Work Tenders in Kolkata West Bengal. Bidders can get complete Tender details and download the document.




Tender Notice

49443480
Demolishing Unauthorized Structures And Construction Barricade Under Chetla Lock Gate Bridge.
Tender
Indian
West Bengal
Kolkata
13-06-2025

Tender Documents

Tender Details

Demolishing Unauthorized Structures And Construction Barricade Under Chetla Lock Gate Bridge.- 1 Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. 2 Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. 3 Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety 4 Brick work with 1st class bricks in cement mortar (1:4)(a) In foundation and plinth 5 Supplying, fitting and placing HYSD bar reinforcement in Sub-structure including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1mm in size and conforming to IS 280 at every intersection hooked and bent to correct shape and placed on forms etc. including cost of black annealed wire and cost of loading, unloading, carriage of all steel materials complete as perdrawing and technical specifications and direction of Engineer-in-charge. 6 M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing &direction of Engineer-in-Charge complete Including cutting to requisite shape & size, fabrication Including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approvedmake and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges ofall tools and plants and labour reqlred for execution and all / incidental chages such as electricity, labour Insurance) etc. complete.For Roof Truss Worksa) span up to 12 mt.For Roof Truss WorksFor each 3.00 mt. Fencing( as per attached Drawing) ,Total no. of Fencing = 17 nos. 7 M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.Payment to be made on the basis of calculated weight of structural Mmembers only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof.I) For structural members of specified sections weighing less than 22.5 Kg./m For each 3.00 mt. Fencing( as per attached Drawing) ,Total no. of Fencing = 13 nos. 8 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](ii) With 1:4 cement mortar (a) 20 mm thick plaster 9 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surfacethroughly, complete as per manufacturers specification and as per direction of the EIC.(a) One Coat 10 Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturers specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.(Two Coat)a) Normal Acrylic Emulsion 11 (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. 12 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface :With super gloss (hi-gloss) - (iv) Two coats (withwhite in shade) 13 Dismantling and removing of major & minor unauthorised / illegalstructures Hoarding / Banners etc. with a) Blacksmith (Head) - 2 nos. , b) Blacksmith (Helper) - 4 nos., c) Gas Cutter - 1 no. including LPG & Oxygen cylinder , nozzels and other necessary equipments etc. along with Operators & Helper , d) Hydra - Cranes - 1 no. including fuel and operator and helperfor 8 Hrs. on Each Day including necessary safety arrangement to be used for demolishingillegal structuresas per direction of the E.I.C . 14 Add GST @ 18% on Rs.433935.67 i.e. Total amount over Item No. 01 to 13 15 Add Labour Welfare Cess @ 1% on Rs.512044.09 i.e. Total amount over Item No. 01 to 14

Key Value

Document Fees
Refer document
EMD
INR 10343.0 /-
Tender Value
INR 5.17 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail