|
| 1 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specially provided for, complete all as specified and directed. |
| 2 | Excavating over areas, n exc 1.5m deep & getting out in hard / dense soilcomplete all as specified and directed. |
| 3 | Excavation in post holes or similar holes(each n exc 0.5 cum), getting out, returning, filling in and ramming earth or broken rubble wixed with earth around, in layers not exceeding 25 cm and getting out in hard/dense soilcomplete all as specified and directed. |
| 4 | M&L for plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundations andfillingcomplete all as specified and directed. |
| 5 | M&L for plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations andfillingcomplete all as specified and as directed. |
| 6 | M&L precast cement concrete type C-1, 1:3:6 (using 20mm graded stone aggregate) block masonary with solid blocks exc 10 cm in with and setting in cement mortar 1:6complete all as specified and as directed. |
| 7 | M&L for steel reinf roundbars 10 mm dia and over cut to length and bent to shape required including cranking, bending spirally for hoping for grill door, hooking end not less than 0.9mm dia or securing with welding Fe-410 W (Gde-250) quality -Acomplete all as specified and as directed. |
| 8 | S&FJoist, channel, angle, or tee sections,fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)Fe 410-W (Gde E- 250) quality-Acomplete all as specified and as directed. |
| 9 | S&F structural steel for roof truss, purlin, post in etc ( angle,tube or other), including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979, Gde St-240complete all as specified and as directed. |
| 10 | S&F 0.63 mm thick Galvanised, corrugated mild steel shetting with two corrugations side lap, fixed with L-type orJ-type or cranked hook bolts in lieu of screw in roofs, walls etc. with grade of zinc coating 275, etccomplete all as specified and as directed. |
| 11 | M&L for cement concrete 1:4:8 type D2(using 40 mm graded stone aggregate) 100 mm thick as in sub basecomplete all as specified and as directed. |
| 12 | M&L for cement concrete 1:2:4 type B1(using 20 mm graded stone aggregate) 100mm thick as in flooring and finishing the surface even and smooth without using extra cementcomplete all as specified and as directed. |
| 13 | M&L for preparation of new painted steel surface of any description exceeding 10cm in width and girth and applying two coat of synthetic enamel paint as in camouflaing pattern over roof of sheds etc over a one coat of red oxide, zinc chrome,complete all as specified and as directed. Note -The pattern of camouflaing shall be approved by GE. |
| 14 | M&L two coat of synthetic enamel paint over a coat of red oxide on newly steel surfaces of any description,over 10cm in width or girth including preparation of surfacecomplete all as specified and as directed. |
| 15 | M&L 30mm thick Block boards, grade 1 quality, exterior grade, decorative type ,commercial type,fixed with screws to timber frame-workcomplete all as specified and as directed. |
| 16 | M&L for 10 mm thick rendering in CM 1:4 on fair face of brick/concrete surface and finished even and smooth without using extra cement,complete all as specified and as directed. |
| 17 | Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in hard/dense soilcomplete all as specified and as directed. |
| 18 | Removing of surplus soil of excavated materials n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting pointcomplete all as specified and as directed. |
