|
| 1 | Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. |
| 2 | M&L for flyash brick work with old size bricks straight or curved on plan exc 6M mean radius built in CM 1:6complete all as specified and directed. |
| 3 | M&L for Brick work with fly ash bricks straight or curved on plan exc 6mtr mean radius in CM 1:4 using old size bricks complete all as specified and as directed. |
| 4 | M & L for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 5 | M & L for 15 mm thick renderingon fair faces of brick work or concrete surfaces of wallsetc 10 mm thick im CM 1:6 and 5 mm thick inCM 1:4mixed with water proofing compound as per manufacturers instruction & finished the surfaces even and smooth without using extra cement, complete all as specified and directed. note : WPC WILL BE MEASURED AND PAID SEPERATELY |
| 6 | M&L Rendering in CM 1:4,15 mm thick on fair faces of brick/concrete surfaces finished even and smooth withusing extra cement complete all as specified and directed. |
| 7 | M&L for PCC type B1 1:2:4 (12.5mm graded aggregate) as in copings, bed plates, kerbs .levelling coursesetc. complete all as specified and directed. |
| 8 | Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed. |
| 9 | M & L for Gl wire netting 0.90mm dia & 12mm mesh in patches of lathing to wood or metal studding, joists, etc. in walls, Ceilings, stanchions, beams, etc. including all laps, cutting & waste complete all as specified and directed. |
| 10 | M & L for Dubbing out average 15mm thick on irregular face of walls in patches in CM (1:4) complete all as specified and directed. |
| 11 | M/L preparation of newly plastered wallsurfaces and applying two coats of cement based paint incl primer complete all as specified and as directed |
| 12 | M & L for preparing new surfaces of walls and applying three coats of white wash to walls including cornices complete all as specified and directed. |
| 13 | M/L preparation of old plastered wallsurfaces and applying one coat of cement based paint incl primer complete all as specified and as directed |
| 14 | M & L for preparing old surfaces of walls and applying one coat of white washincluding cornices complete all as specified and directed. |
| 15 | M & L for Preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and directed. |
| 16 | M & L for applying three coat of white wash as in ceiling incl preparation of newly plastered ceiling surfaces all as specified and as directed. |
| 17 | Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area nexc.1.5 sqm each including separating guard bars/grills/wire mesh etc., all as specified and as directed by the Engineer-in-Charge. |
| 18 | S&Faluminium powder coated sliding window/ventilator using alumimium section weighing not less than 0.495 Kg per RM for frame and 0.48 Kg per RM for sliding shutters including fixed with sash bars aluminium anodised snap beads, screws andfixed alongwith same sectionin three rolling sliding shutters two for fully glazed with 4mm thick tinted glass fixed with glazing clips, and one for wiremesh shutters etc. The rate is inclusive of all fittings of builders hardware such as wirmesh hinges, bow handles, locking arrangements etc complete all as directed by Engr-in-Charge. |
| 19 | S&F Anodised aluminium door shutterspowder coating of any colour (Thickness or powder coating not less than 50 micron), aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised alumnium snap beading, screws etc. complete all as specified |
| 20 | S&F aluminium powder coated (Minimum thickness of powder coating 50 micron) frame for doors/windows/ventilator/partition, glazing clips with one or more tracks including joining cleats for fixing complete all as directed by Engr-in-Charge. |
| 21 | S & F in repair 9 mm thick Prelaminated Particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to aluminium frame workall as specified |
| 22 | S & F Cast Aluminium (Die cast ) body door closer hydraulically regulated, designation No.2 universal type, suitable for door shutters up to 701mm to 850 mmin width and of weightbetween 36 to 60 kg complete all as specified and directed. |
| 23 | M& LBrass mortice lock vertical typesize 100 mm4 leverswith stainless steelhandleset suitable for right or left, inside or out side opening doors complete all as specified and directed. |
| 24 | S&F Sheet glass 5.5mm thick, plain ordinary quality & glazing with glazing clips in square exc 0.5 sq.m in each pane (any thickness, size, quality or description ) to wooden/aluminium frames or stone, concrete or brick surrounds, glazed with putty or fixed with beadsall as specified |
| 25 | S&F 1.25mm thick Steel rolling shutters, but gear operated typewith level gear box and crank handle, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed. |
| 26 | M/L 10mm dia and over TMT bars as in reinforecment cut to length bent to shape required including cranking hooking ends and binding with mild steel wire( annealed) not less than 0.9 mm dia (or) securing with clips all as specified and as directed |
| 27 | M/L 6mm to 8mm dia TMT bars as in stirrups cut to length bent to shape required including cranking hooking ends and binding with mild steel wire( annealed) not less than 0.9 mm dia (or) securing with clips all as specified and as directed |
| 28 | M&L for form work to sides and soffits of floor or roof beams,beam haunchings, girders, bressummers, lintels etc fair finished surfaces of concrete complete all as specified and directed. |
| 29 | M & Lfor reinforced cement concrete M-30 (Design mix ) using 20mm graded aggregate in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 30 | S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Confirming to Fe 410-W (Gde-E- 250) quality- A complete all as specified and directed. |
| 31 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified. |
| 32 | M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W(Gde-E- 250) quality-A complete all as specified and directed. |
| 33 | S&F for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. Fe-410- W(Gde- E-250) quality- B (cut to ordinary lengths i.e. Within 20mm of the length indicated) all as specified and directed. |
| 34 | M&L for applying two coats of synthetic enamelled paint over a coat of red oxide on steel or iron surfacebased materials of any description , not other wise described over 10 cm width or girth including preparation of new surfaces complete all as specified and directed. |
| 35 | M&L for applying two coats of synthetic enamelled paint on steel or iron surfacebased materials of any description , not other wise described over 10 cm width or girth including preparation of old surfaces complete all as specified and directed. |
| 36 | Dismantling of PGI/CGI/Galvalume sheets asin roof coverings / wall cladding complete all as specified and directed. |
| 37 | S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 38 | S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 39 | M & L for Complete removal of existing roof treatment any type and demolition of cement concrete padding at roof slab n exc 15cm thickness all specified and directed by Engr-in-Charge |
| 40 | M & L for plain cement concrete in roof kerbs or mud stops, rounded or chamfered on edges as roof padding type B0, 1:2:4 (12.5mm graded aggregate) finished fair and even over concrete surface on roof top, and finished even and smooth complete all as specified and directed. |
| 41 | M&L for10mm thick cement plaster in CM 1:3 mixed with WPC @ 200 ml per bag, when the concrete is green all as per manufacturer instructions ( Note: Water proofing compound will bemeasured and paid seperately) |
| 42 | Supply only Liquid water proofing compoud |
| 43 | Cleaning and preparation of newly plastered roof surfaces and applying the water proofing treatment as under.(a)Applying 1st course of bituminious (oil based) primer confirming to IS-3384 @ 0.4 lit/sqm over the screed bed.(b)Applying 2nd course of a coat of binding material with blown type bitumen of grade 85/25 heating to working temperature of 180 0 C and applied @ 1.2 kg/sqm.(c) Applying 3rd course of APP (Atactic polypropylene) based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) laid with 75 mm side overlapand 100 mm overlap by forced / torch application as per manufacturer\"s instructions. (d) Applying 4th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180 degree C and applied @ 1.2 kg/sqm over APP membrane,(e)Applying 5th course of a one coat of solar reflective aluminium paint @ 0.10 Litre/Sqm on roof surfaces complete all as specified and directed. |
| 44 | Taking down of existing cement or cement lime plaster alongwith the existing water proofing treatment on walls andapplying 10 mm thick cement plaster 1:3 mixed with liquid Water Proofing Compound. ( Note: Water proofing compound will be paid under measured seperately) |
| 45 | Cleaning and preparation of newly plastered wall surfaces and applying the water proofing treatment as under.(a)Applying 1st course of bituminious (oil based) primer confirming to IS-3384 @ 0.4 lit/sqm over the plastered surfaces.(b)Applying 2nd course of a coat of binding material with blown type bitumen of grade 85/25 heating to working temperature of 180 degree Celsius and applied @ 1.2 kg/sqm.(c) Applying 3rd course of APP (Atactic polypropylene) based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) laid with 75 mm side overlapand 100 mm overlap by forced / torch application as per manufacturer\"s instructions.(d) Applying 4th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180 degree C and applied @ 1.2 kg/sqm over APP membrane(e)Applying 5th course ofone coat of solar reflective aluminium paint @ 0.10 Litre/Sqm on wall surfaces complete all as specified and directed. |
| 46 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 47 | M & L for 75 mm thick,plain cement concrete1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection etc, finishingsurface even and smooth without using extra cement complete all as specified and directed. |
| 48 | M&L for Broken stone or boulders as in hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed |
| 49 | M&L PCC 1:4:8, Type D2 (using 40 mm graded stone aggregate), 75 mm thick, as in sub base complete all as specified and directed |
| 50 | M & L for 100 mm thick,plain cement concrete1:2:4, type B-2 (using 40mm graded crushed stone aggregate) as in floor etc (to rise the floor level), includingfinishing thesurface even and smooth using extra cement complete all as specified and directed. |
| 51 | S&F Aluminium dividing strips 100mm wide and 1.5mm thick, inserted in position, conform to design complete all as specified and directed. |
| 52 | M & L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed |
| 53 | M&L for rendering 10mm thick in CM 1:3 on ceiling area in patches not exceeding 5.00 sqm, finished even and smooth without using extra cement all as specified and directed. |
| 54 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge metredcut at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall in repairs by drilling 100mm long MS screws using PVC fastener all as per specification and directed. |
| 55 | S&F Factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick with 2,4,6 raised panel design with 2mm thick moulded Prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing and all as directed. |
| 56 | S&FButt hinges, 75mmsize medium weightcold rolled mild steel Etc. complete all as specified and directed. |
| 57 | S&FAluminiumhandlescast typeanodised 150 mm size complete all as specified and directed. |
| 58 | S&F Aluminium anodisedbarrel tower bolts of extrudedsection 200mm long complete all as specified and directed. |
| 59 | S&F Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 1000 ltrs including dismantling of existing tank of any descriptionand S&F 20 mm ball PTMT Ball valve high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 60 | S&F in repairs Vitreous china squatting pan orissa pattern size 550x440mm white with integral foot rest (excluding flushing cistern and flush pipe ) and making good to floor as specified. |
| 61 | S & Fin repairs Vitreous china wash down water closet (pedestalpattern ) white (excluding fixing bolts flushing cistern and flush pipe ) as specified |
| 62 | S&F in repairs PVC low level flushing cistern 10 ltrs capacity with complete accessories, PVC flush pipe, PVC over flow pipe, etc.and connected to water closet as per manufacturer\"s instruction and asdirected by the Engineer in charge |
| 63 | S & F in repairs 15mm Bib taps cast fancy type, chromium platedwith crutch or butterfly handle, screwed for iron pipe or for brass ferrulefor fancy type Chromimum plated complete all as specified and directed. |
| 64 | S&Fin repairs 15mm dia Brass stop valves chromium plated, fancy type with long shank and cup concealed type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed. |
| 65 | S&F in repairs fortwo waybib tap 15 mm bore chromium plated with crutch or butterfly handle, fancy type with long shank screwed down both ends for pipes or for union complete all as specified and directed. |
| 66 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 67 | Dismantlingfloor, hearth or walltiling incl cement mortar bedding (but not backing), removingunserviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 68 | M & L for non skid ceramic coloured joint free tile in Patches 7 to 8 mm thick Concept tiles design as approved (Sqaure or rectangular) area of each tiles eexceeding 0.06 Sqm but not exceeding 0.11 Sqmin floors etc of pattern as approved over and including 15 mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed. |
| 69 | M & L for glazed ceramic colouredtiles in vertical surface 300x250x7mm/450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including Rendering 10mm thick in CM 1:4 for receiving wall tiles on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and as directed. |
| 70 | Supply & Laying of CPVC PipesSDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete all pipe fittings and including taking up or down in the existing pipe line completelyall as specified for following pipes :- (a)20mm outer dia bore |
| 71 | (b)25mm outer dia bore |
| 72 | M & L in repair Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for 25 mm dia bore pipes complete all as specified and as directed. |
| 73 | M & L in repair Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for 20 mm dia bore pipescomplete all as specified and as directed. |
| 74 | M & L for Cutting holes into or through brick walls built in cement mortar and making good inPCC (1:2:4) type B-1 as required Superficial area not exc 150 Sq CMcomplete all as specified and as directed. |
| 75 | S & F PVC (SWR) juncton single (single T ) equal or un equal withaccess door110mm fixed in repairs complete all as specified anddirected. |
| 76 | S & F PVC (SWR) vent cowl 110mm fixed in repairs complete all as specified anddirected. |
| 77 | S & F PVC (SWR) pipes 110mmsingle socketed, in any length with rubber ringjoints fixed to walls /floor as in spouts etc complete including dismantling existing pipes along with fittingsall as specified anddirected. |
| 78 | S & F PVC (SWR) pipes 75mmsingle socketed, in any length with rubber ringjoints fixed to walls /floor as in spouts etc complete including dismantling existing pipes along with fittings all as specified anddirected. |
| 79 | S & F PVC (SWR) bends 100 mm bore complete all as specified anddirected. |
| 80 | Demolition of cement concrete of any description and in any position not otherwise specially provided forcomplete all as specified and as directed. |
| 81 | M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cementcomplete all as specified and as directed. |
| 82 | M&L for Precast cover slab 1:2:4, type B1 (using 20mm graded aggregate) inlandings, cover slabs (for manholes etc.,) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4, for manholes etccomplete all as specified and as directed. |
| 83 | Material and labour for 20-25mm thick Designer Chequered coloured cement concretetiles of size 300 x 300mm,set and jointed in neat cement slurry and pointed with grey cement with pigments over and including 20 mm thick screed in cement mortar 1:4 etc., completeall as specified and as directed. |
| 84 | S&F Plastic water closet seat and cover for pedestal pan, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed |
| 85 | S&F in repairs Vitreous China urinals,half stall type white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed |
| 86 | S&F PVC waste pipe 40mm dia, 90cm long for urinal/WHB complete all as specified and directed. |
| 87 | M&L for point wiring of size 1.5 sqmm (two run) with PVC insulated unsheathed multistranded copper conductor cable of 1100V grade drawn throughnew non metallic rigidsurface PVC conduit ,in wall/floor and fixed on ceiling/roof etc, including pressed steel terminal boxes concealed in walls for housingmodularswitches, sockets, fan regulators etc., incl provn of 1.5 sqmm PVC insulated copper earth conductor cable for earth continuity and connecting to common earth dolly including taking down complete for :- |
| 88 | one light point controlled by one switch |
| 89 | one fan point controlled by one switch |
| 90 | one 3 pin socket outlet 5 amps on the same board controlled by one switch. |
| 91 | one 3 pin socket outlet 5 amps on independent board controlled by one switch. |
| 92 | one bell/buzzer point controlled by one bell push |
| 93 | As per above item No. 87 for one socket outlet three pin 15 amps control by one switch independent board with cable 2.5 sqmm size complete all as specified and directed. |
| 94 | S& F for modular cover plate with frame 3 module complete all as specified and directed. |
| 95 | S& F for modular cover plate with frame 4 module complete all as specified and directed. |
| 96 | S& F for modular cover plate with frame 6 module complete all as specified and directed. |
| 97 | S&F modular switches suitable fortype AC 240V, 6 amps 1 modulecomplete all as specified and directed. |
| 98 | S&F modular socketssuitable fortype AC 240V, 6 amps 2 modulecomplete all as specified and directed. |
| 99 | S&F modular switches suitable fortype AC 240V, 16 amps 1 modulecomplete all as specified and directed. |
| 100 | S&F modular power socketssuitable fortype AC 240V, 16 amps 2 modulecomplete all as specified and directed. |
| 101 | S&F modularfan regulator suitable fortype AC 240V, 2 modulecomplete all as specified and directed. |
| 102 | S&F modular bell switchsuitable fortype AC 240V, 16 amps 1 module complete all as specified and directed by Engr-in-Charge |
| 103 | S&F call bell of multi music type A/C 230 voltscomplete all as specified and directed. |
| 104 | S&F ceiling rose , polycarbonate, isolated bodywith 2 to 3 terminalscomplete all as specified and directed. |
| 105 | S& F ceiling fan 230v,1200 mm sweep, five star ratingwith brushless conductor motorcomplete with blades, down rods, electronic regulator and accessories complete including taking down ceiling fan and removing blades and fan body and depositing in store including connecting rod, cotter pins and all accessories completeall as specified and as directed. |
| 106 | S & F 20 Watts LED COOL LIGHT fitting, surface mounting general purpose LED Battens in Extruded Aluminum housing with wide range of wattages to suite variety of application areas, complete including taking downall as specified and directed by the Engr-in-Charge. Make : Havells Cat No. LUMILINEPLUSNEOBS20WLED865SPCSSIND or techno commercial equivalent Philips/Bajaj. |
| 107 | S & F 36 Watts 2x2 ceiling COOL LIGHT a veratile 2X2 Recess mounted luminaires which provides soft-light and glare free symmetrical illumination, including taking down complete all as specified and as directed.Make Havells Cat No. VENUSNEO2X2PLR36WLED865G2 or techno commercial equivalent in Philips/Bajaj. |
| 108 | S&Ffor 45 W new generation energy saving environmental friendly long life versatile pressure die castaluminium IP-66 streetlightwith high power LED as light source including taking down complete all as specified and as directed by the Engineer-in-ChargeMakeHavells ( ENDURASUNDOWNSL45LED765PASYBOPC) or its techno commercial equivalent inBajaj/Philips |
| 109 | Supply, fix, test and commissioning LEDPost top lanternluminaries outdoor type 25 Watts new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs as light source and electronic driver suitable for operation on AC single phase 220-240 Volts, 50 HZ supply, including provision of two single core 1.5sqmm copper conductor PVC insulated, 1100 Volts, cable not less than 8 meter long etc, connectiing from junction boxes to poles including taking down completeall as directed by Engr-in-Charge. Make: Havells ( CORALPT25WLED757PSYMTOPC) or its techno commercial equivalent inBajaj/Philips |
| 110 | S&F sub main wiringcomplete with two runs of 4 sqmmPVC insulatedsheathed single core multistrand copper conductorcable FRLSH of 1100 volts grade drawnthrough new non metallic rigid PVC conduit pipe concealed in wall alongwith accessories fixed on walls/floors/ceilingwith one run of 4 sqmm PVC insulatedunsheathed copperconductorcable as earth continuity conductor including taking down all as specified and directed by Engr-in-Charge.Note:- two runs of PVCinsulatedcable 4 sqmm+ one run 4 sqmmof earth wire and one run of conduit including accessories shall be measured as one length.(For ACs- SPLIT TYPE ) |
| 111 | S&F sub main wiringcomplete with two runs of 10 sqmmPVC insulatedsheathed single core multistrand copper conductorcable FRLSH of 1100 volts grade drawnthrough new non metallic rigid PVC conduit pipe concealed in wall alongwith accessories fixed on walls/floors/ceilingwith one run of 10 sqmm PVC insulatedunsheathed copperconductorcable as earth continuity conductor including taking down all as specified and directed by Engr-in-Charge.Note:- two runs of PVCinsulatedcable 10 sqmm+ one run 10 sqmmof earth wire and one run of conduit including accessories shall be measured as one length. (From VTPN DBs to SPN DBs) |
| 112 | S&F sub main wiringcomplete with Four runs of 16 sqmmPVC insulatedsheathed single core multistrand copper conductorcable FRLSH of 1100 volts grade drawnthrough new non metallic rigid PVC conduit pipe concealed in wall alongwith accessories fixed on walls/floors/ceilingwith one run of 10 sqmm PVC insulatedunsheathed copperconductorcable as earth continuity conductor including taking down all as specified and directed by Engr-in-Charge.Note:- Four runs of PVCinsulatedcable 16 sqmm+ one run 16 sqmmof earth wire and one run of conduit including accessories shall be measured as one length. Location : From Power VTPN DB to 20 Tr ACs (2 Nos.) |
| 113 | Supply and fix MCB DB VTPN 4 way horizantal double door 415 V AC 50Hz suitable to mount MCCB4Pole upto 160A as incomer andMCBs TP/DP/SP as out going with tinned copper bus bar ,neutral link earth link complete. IP 43 with metal door including taking downcomplete after taking proper disconnecting of electric supply properly andmaking good surfacecomplete all as specifided and directed.Note:- MCCB and MCBs shall be measured and paid separately. |
| 114 | S&F SPNMCB distribution board made ofCRCA sheet, powder coatedpaint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 240 volts 12 way MCB DB, SPN with 200 Amp rated bus bar shall conform to IP 38 protection including taking downcomplete after taking proper disconnecting of electric supply properly andmaking good surfacecomplete all as specified and directed. |
| 115 | S&F MCCB adjustable thermal & magnetic setting 415V, 4 pole, 50Hz of cap 160 Amps 36 KAincluding taking downcomplete after taking proper disconnecting of electric supply properly andmaking good surfacecomplete all as specified and directed.Location : I/C for VTPN DBs |
| 116 | S&F MCB of rating 415 Volts, TPN 63 Ampscompleteall as specified and directed by Engr-in Charge including taking downcomplete after taking proper disconnecting of electric supply properly andmaking good surfacecomplete all as specified and directed. |
| 117 | S&F MCB of rating 240 Volts, SPN 63 Ampsincluding taking downcomplete after taking proper disconnecting of electric supply properly andmaking good surfacecomplete all as specified and directed. |
| 118 | S&F MCB of Single pole of rating 6 to 32 Amps 240 Volts including taking downcomplete after taking proper disconnecting of electric supply properly andmaking good surfacecomplete all as specified and directed. |
| 119 | Taking down AC boxany type and any size complete after taking proper disconnecting of electric supply properly andmaking good surfacecomplete all as specifided and directed |
| 120 | S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps, 230V complete all as specifided and directed |
| 121 | S&F Triple pole and earth encolsure with a three pin and earth plug with socket complete with one TPN MCB 63 Amps, 415 V complete all as specified and as directed ( For 20 Tr AC s) |
| 122 | Earthing complete with galvanisedsteel earth plate electrode 60cm x 60 cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25m deep below ground level with top edge of plate not less than 1.5 below ground level connected to GI 4mm earth wire by means of bolts, nuts check nuts washers made of galvanised iron or steel earth wire protected by GI pipe 15 mm bore light grade connected upto switch board incl 20mm bore GI water pipe with funnel and wire mesh all as shown in electrical plate No.3 of SSR Part I including earth chamber of PCC 1:2:4 type B1 using 20mm grade aggregate with RCC cover slab 1:2:4 type B1, 40mm thick with 15mm dia MS bar 100mm C/C both ways and 6 MM dia MS hooks complete including taking down all as specified inlcuding testing on completion. |
