Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 15.2.1) |
| 2 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. (As per CPWD DSR 2023, Code No.- 15.3) |
| 3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below.Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 15.12.1) |
| 4 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 15.56) |
| 5 | Demolishing brick work, manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 15.7.4) |
| 6 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (As per CPWD DSR 2023, Code No.- 2.8.1) |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). Including supply of all material, labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 4.1.8) |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) (As per CPWD DSR 2023, Code No.- 4.1.6) |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size. Including supply of all material, labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 4.1.3) |
| 10 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. Including supply of all material, labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 11.3.1) |
| 11 | Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick. Including supply of all material, labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 11.13.1) |
| 12 | Reinforced cement concrete work in beams, columns, suspended floors, roofs havings slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases up to floor five level, excludingthe cost of centering, shuttering, finishing and reinforcement, with 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) (As per CPWD DSR 2023, Code No.- 5.3) |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars.Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 5.22.1) |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform, Shelves, slab etc.(Cast in situ), as per direction of Engineer in charge.Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 5.9.4) |
| 15 | Centring and shuttering including strutting,ropping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers,Columns, Pillars, Posts etc. as per direction of Engineer in charge.Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 5.9.5) |
| 16 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) (As per CPWD DSR 2023, Code No.- 6.1.1) |
| 17 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand).Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 6.1.2) |
| 18 | Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) :With Modular bricks. Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 6.3.2) |
| 19 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand).Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 6.13.2) |
| 20 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, With cement mortar 1:4 (1cement: 4 coarse sand) all complete as per direction of Engineer-in-Charge. (As per CPWD DSR 2023, Code No.- 14.1.2) |
| 21 | 12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand).Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 13.4.2) |
| 22 | 6 mm cement plaster of mix :1:3 (1 cement: 3 fine sand).Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 13.16.1) |
| 23 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides. Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 10.29.1) |
| 24 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 9.21.2) |
| 25 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm. (As per CPWD DSR 2023, Code No.- 9.62.1) |
| 26 | Providing and fixing ISI marked oxidised M.S.tower bolt black finish, (Barrel type) with necessary screws etc.150x10 mm. (As per CPWD DSR 2023, Code No.- 9.63.3) |
| 27 | Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. 100x58x1.90 mm. (As per CPWD DSR 2023, Code No.- 9.57.2) |
| 28 | Providing and fixing ISI marked oxidised M.S.handles conforming to IS:4992 with necessary screws etc. 100 mm. (As per CPWD DSR 2023, Code No.- 9.66.2) |
| 29 | Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.: 150 mm. (As per CPWD DSR 2023, Code No.- 9.59.1) |
| 30 | Attending minor type of repair for full day by engaging and supplying one suitable Carpenter /Mason / Mistry / Plumber etc. for carrying simple type of repairing of all work including all T & P etc. required for proper completion of the work as per direction of Engineer in charge but excluding cost of material. |
| 31 | Attending minor type of repair for full day by engaging and supplying one suitable Beldar/Sweeper/Mazdoor/Labour/Un -skilled etc. for carrying simple type of repairing of all work including all T & P etc. required for proper completion of the work as per direction of Engineer in charge but excluding cost of material. (NSI) |
| 32 | Removal ofdebris /waste material/ any other material / rubbish from anylocation by full load tractor trollyas desired by the Engineer-in- charge & safe disposal of the same out side the Nigam area including cost ofall labour (minimum four nos labour or more as required) T& P etc required for proper loading/unloading and disposal of waste or any other materialrequired for the proper completion of the work. (NSI) |
| 33 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 13.91) |
| 34 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (As per CPWD DSR 2023, Code No.- 13.80) |
| 35 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. Two or more coats on new work Including supply of all material labour T&P etc. required for proper completion of the work.(As per CPWD DSR 2023, Code No.- 13.41.1) |
| 36 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats) Including supply of all material, labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 13.81.1) |
| 37 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work(Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.-13.111.1) |
| 38 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats (As per CPWD DSR 2023, Code No.-13.83.2) |
| 39 | Applying priming coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works (As per CPWD DSR 2023, Code No.-13.50.3) |
| 40 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 13.62.1) |
| 41 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 13.99.1) |
| 42 | Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on new work (As per CPWD DSR 2023, Code No.- 13.63.1) |
| 43 | Lettering with black Japan paint of approved brand and manufacture (As per CPWD DSR 2023, Code No.- 13.71) |
| 44 | Providing and fixing trap of self cleansing design with screwed down or hinged 100 mm inlet and 100 mm outlet. Sand Cast Iron S&S as per IS: 1729.Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 17.60.1.2) |
| 45 | Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm. Including supply of all material, labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 17.13.2) |
| 46 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings, accessories and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. Including supply of all material, labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 17.2.1) |
| 47 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White. Including supply of all material, labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 17.18.1) |
| 48 | Providing and fixing white vitreous china wash basin including making all Flat back wash basin of size 550x400mm.Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 17.25.2) |
| 49 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.(As per CPWD DSR 2023, Code No.- 17.73.2) |
| 50 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard boardgrou nd fixed to wooden cleats with C.P. brass screws and washers complete.(As per CPWD DSR 2023, Code No.- 17.31) |
| 51 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 100mm dia metre (As per CPWD DSR 2023, Code No.- 18.22.1) |
| 52 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 150mm diametre (As per CPWD DSR 2023, Code No.- 18.22.2) |
| 53 | Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983. Kitchen sink without drain board.610x460 mm bowl depth 200 mm. Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 17.10.2.2) |
| 54 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms (As per CPWD DSR 2023, Code No.- 17.69.1) |
| 55 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms(As per CPWD DSR 2023, Code No.- 17.69.2) |
| 56 | Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C.32mm dia.Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 17.28.1.1) |
| 57 | Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore.Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 18.21.2.1) |
| 58 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore. Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 18.18.1) |
| 59 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank. Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 18.48) |
| 60 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore.Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 18.15.1) |
| 61 | Providing and fixing brass stop cock of approved quality : 15 mmnominal bore.Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 18.16.1) |
| 62 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore(As per CPWD DSR 2023, Code No.- 18.17.1) |
| 63 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore (As per CPWD DSR 2023, Code No.- 18.53.1) |
| 64 | Providing and fixing C.P. brass long nose bib cock(15 mm nominal bore) of approved quality conforming to IS standards and weighing not less than 810 gms.(As per CPWD DSR 2023, Code No.--18.50.1) |
| 65 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Iinternal work - Exposed on wall. 15 mm dia. nominal bore.Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 18.10.1) |
| 66 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work) 15 mm dia. nominal bore.Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 18.12.1) |
| 67 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work) 20 mm dia. nominal bore. Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 18.10.2) |
| 68 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 15 mm nominal dia Pipes (As per CPWD DSR 2023, Code No.- 18.7.1) |
| 69 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 18.8.1 15 mm nominal dia Pipes (As per CPWD DSR 2023, Code No.- 18.8.1) |
| 70 | Hire charges of welding machine with single phase with welder, helper and electrodes etc. for repair and welding of gates, door, window etc. for 8 hrs. in a day complete with all material, labour, T&P etc. required for proper completion of work. (NSI) |
| 71 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class teak wood. Including supply of all material, labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 9.1.1) |
| 72 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer, Using flats 30x6mm for diagonal braces and central cross piece(As per CPWD DSR 2023, Code No.- 10.5.2) |
| 73 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets: 20 mm dia (heavy type). (As per CPWD DSR 2023, Code No.- 9.47.1) |
| 74 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Including supply of all material, labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 10.2) |
| 75 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets,gates and similar works (As per CPWD DSR 2023, Code No.- 10.25) |
| 76 | Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete.(Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbedwire used. With G.I. barbed wire. Including supply and fixing necessary screws nails and all material, labour and T&P etc. required for proper completion of work. (As per CPWD DSR 2023, Code No.- 16.18.1) |
| 77 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge: Made of G.I. wire of dia 4 mm.(As per CPWD DSR 2023, Code No.- 16.70.1) |
| 78 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.Including supply of all material, labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 4.12) |
| 79 | Providing and fixing wire gauge shutters using galvanized M.S. wire gaugeof average width of aperture 1.4 mm in both directions with wire of dia 0.63mm, for doors, windows and clerestory windows with hinges and necessary screws : 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Second class teak wood. Including supply of all material, labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 9.27.2.1.1) |
| 80 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.30 mm thick shutters. Including supply of all material, labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 9.5.1.2) |
| 81 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc.complete : 2nd class teak wood 50x12 mm. Including supply of all material, labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 9.40.1.1) |
| 82 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (As per CPWD DSR 2023 Item code-2.31) |
| 83 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm. Including supply of all material, labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 14.5.1) |
| 84 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 5 mm. Including supply of all material, labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 14.5.2) |
| 85 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75mm diameter. Including supply of all material, labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 12.41.1) |
| 86 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110mm diameter. Including supply of all material, labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 12.41.2) |
| 87 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories like Coupler, Tee, Bend etc. for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansionas per direction of Engineer - in - charge. 75 mm. . Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 12.42.1.1) |
| 88 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories like Coupler, Tee, Bend etc. for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansionas per direction of Engineer - in - charge. 110 mm. Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 12.42.1.2) |
| 89 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Including supply of all material, labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 8.31) |
| 90 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc, complete. Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 11.37) |
| 91 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm. (As per CPWD DSR 2023, Code No.- 11.41.2) |
| 92 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade.Area of slab upto 0.50 sqm. Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 8.2.2.1) |
| 93 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / eoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) (As per CPWD DSR 2023, Code No.- 21.1.2.3) |
| 94 | Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) :12 mm thick. (As per CPWD DSR 2023, Code No.- 9.17.1) |
| 95 | Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) :18 mm thick. (As per CPWD DSR 2023, Code No.- 9.17.2) |
| 96 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m². Including supply of all material, labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 12.1.3) |
| 97 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m². Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 12.4.2) |
| 98 | Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main. 15 mm nominal bore. (As per CPWD DSR 2023, Code No.- 18.20.1) |
| 99 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) (As per CPWD DSR 2023, Code No.- 14.75A) |
| 100 | Providing and fixing plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete (frame work to be paid separately) : 6 mm thick cement board. Including supply of all material, labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2023, Code No.- 12.26.1) |
| 101 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm (for corrugated roof sheets) (As per CPWD DSR 2023, Code No.- 14.90.1) |
| 102 | Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/ masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-inCharge. (The payment shall be made on the basis of actual weight of approved grout injected.) Stirrer mixed SBR Polymer (of approved make) modifiedCement slurry made with Shrinkage Compensating Cement in concrete/RCC work.(As per CPWD DSR 2023, Code No.- 26.35.2) |
| 103 | Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and |
| 104 | the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per sqm (As per CPWD DSR 2023, Code No.- 22.23.1) |
| 105 | Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete.(As per CPWD DSR 2023, Code No.- 14.12) |
| 106 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Rectangular shape 600x450 mm internal dimensions (As per CPWD DSR 2023, Code No.- 19.19.1.1) |
| 107 | Neat cement punning.(As per CPWD DSR 2023, Code No.- 13.18) |
| 108 | Cleaning of septic tank including disposal of waste out side the nigams area by mechanically as per direction of the E/I including all cost of labour, T&P etc required for completion of work ( the tank used for collection of soil waste water and sludge should not be less than 4500 )-NSI |
| 109 | Disposal of dead body of big animal like cow, hourse, buffelo etc. from colony area to approved municipal area or as approved by Engineer-in-charge, including digging the pit and sprinkling the salf with sufficient quantity and refilling the pit, including all labour, materil and T&P etc. required for proper completion of work. (NSI) |
| 110 | Providing and fixing sheet covering over expansion joints with iron screws as per design.Aluminium fluted strips 3.15 mm thick. 150 mm wide (As per CPWD DSR 2023, Code No.- 5.29.2.1) |
| 111 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos E.C. 20% with 1% concentratio (As per CPWD DSR 2023, Code No.- 2.35.3.1) |
| 112 | Renewal of old putty of glass panes (length) (As per CPWD DSR 2023, Code No.- 14.9) |
| 113 | Refixing old glass panes with putty and nails (As per CPWD DSR 2023, Code No.- 14.10) |
| 114 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.(As per CPWD DSR 2023, Code No.- 15.60) |
| 115 | Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of \"L\" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge. (As per CPWD DSR 2023, Code No.- 26.40) |
| 116 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail