|
| 1 | Taking down carefully copper /aluminium point wiring (light,fan,socket or power ) complete fittings such as switches and fixtures ceiling roses, pendants, regulators, sockets, lamp holders, bracket light fittings, bulk heads fittings, tube light fittings etc removing the materials from site and making good disturbed surfaces of walls, floors etc complete all as specified and directed. |
| 2 | S&F point wiring for one light point/ fan/ bell/ 5Amps socket out let (independent)point controlled by one, one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS)PVC cable drawn into & including medium grade PVC conduit (not less than 20mmouter dia )with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistrandedcopper conductor cable earth wire and connected to earth dolly complete all as specified and directed :-One light/One fan/one bell point controlled by one switch. |
| 3 | All as per item No 2 herein before but One light point controlled by Two way switch. |
| 4 | All as per item No 2 herein before but One socket outlet 5 pin 5 ampscontrolled by one switch on sameboard. |
| 5 | All as per item No 2 herein before but One socket outlet 5 pin 5 ampscontrolled by one switch onindependent board. |
| 6 | All as per item No 2 herein beforebut wiringwith 2.5 sqmm copper wire (FRLS) PVCand 2.5 sqmm earth wire forsocket outlet 6 pin 16 amps on independent board. |
| 7 | S & F point wiring for one light point / fan point / bell point / 5 Ampere socket outlet point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable ( FRLS) drawn into and including existing conduit and terminal boxes and matching the existing suface mounting fittinglike switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm sizecopper conductor cable as in earth wire and connected to common earth dolly complete all as specified and directed, are as follows :-One light/one fan/one bell point controlled by one, one way switch. |
| 8 | All as per item No 7 herein before butOne light point controlled by Two way switch. |
| 9 | All as per item No 7 herein before butOne socket outlet 5 pin 5 ampscontrolled by one switch on sameboard. |
| 10 | All as per item No 7 herein before butOne socket outlet 5 pin 5 ampscontrolled by one switch onindependent board. |
| 11 | wiringwith 2.5 sqmm copper wire (FRLS) PVCand 2.5 sqmm earth wire forsocket outlet 6 pin 16 amps on independent board. |
| 12 | S & F point wiring for one light point / fan point / bell point / 5 Ampere socket outlet point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core multi-stranded) copper conductor cable (FRLS) drawn into and including PVC casing capping of suitable size with its all necessary fittings and accessories on wooden / stone / brick masonry wall surface and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size solid copper conductor cable as in earth wire and connected to common earth dolly complete all as specified and directed:-One light/one fan/one bell point controlled by one, one way switch. |
| 13 | All as per item No 12 herein beforebut One socket outlet 5 pin 5 ampscontrolled by one switch on sameboard. |
| 14 | All as per item No 12 herein beforebut One socket outlet 5 pin 5 ampscontrolled by one switch onindependent board. |
| 15 | All as per item No 12 herein beforebut wiringwith 2.5 sqmm copper wire (FRLS) PVCand 2.5 sqmm earth wire forsocket outlet 6 pin 16 amps on independent board. |
| 16 | M & L point wiring for Modular fittings for one light point/ fan/ bell/ 5Amps socket out let (independent)point controlled by one, one way switch with 1.5 sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS)PVC cable drawn into & including medium grade PVC conduit (not less than 20mmouter dia )with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) incl modular metal flush box for mounting modular fittings and covered with modular cover plate with frame and cup washersincluding one continuous run of PVC insulated (green colour) 1.5 Sqmm multistrandedcopper conductor cable earth wire and connected to earth dolly complete all as specified and directed:-One light/One fan/one bell point controlled by one modular switch |
| 17 | All as per item No 16 herein beforebut One light point controlled by Two way modular switch. |
| 18 | All as per item No 16 herein beforebut One modular socket outlet 3 pin 6 ampscontrolled by one switch on sameboard. |
| 19 | All as per item No 16 herein beforebut One modular socket outlet 3 pin 6 ampscontrolled by one switch onindependent board. |
| 20 | All as per item No 16 herein beforebut wiringwith 2.5 sqmm copper wire (FRLS) PVCand 2.5 sqmm earth wire formodular socket outlet 5 pin 16 amps on independent board. |
| 21 | S&F switch piano flush type single pole, one way 5 Amp complete all as specified and directed. |
| 22 | S&F switch piano flush type single pole, Two way 6 Amp complete all as specified and directed. |
| 23 | S&F socket out letmulti 5 pin, 5 Amps, flush type complete all as specified and directed. |
| 24 | S&F switch piano flush type single pole, one way 15 Amp complete all asspecified and directed. |
| 25 | S&F socket out let 2 in1,3 pin, 5 and 15 Amp, flush type complete all as specified and directed. |
| 26 | Supply and fix modular type switch single pole, one way 6 Amp complete all as specified and directed. |
| 27 | Supply and fix socket out letmulti 5 pin, 6 Amps, modular type complete all as specified and directed. |
| 28 | Supply and fix switch modular type single pole, one way 16 Amp complete all asspecified and directed. |
| 29 | Supply and fix socket out let 2 in1,3 pin, 6 and 16 Amp, modular type complete all as specified and directed. |
| 30 | S&F modular switch, 2 way 6 Amp 1 modulecomplete all as specified and directed. |
| 31 | S&F modular bell push, 6 Amp 1 modulecomplete all as specified and directed. |
| 32 | S&F ceiling rose, PVC/ Poly carbonate,isolated body three terminal complete all as specified and directed. |
| 33 | S & F lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed. |
| 34 | S & F call bell ding dong AC, 230V single pole complete all as specified and directed, |
| 35 | S&F bell pushpiano flush type single pole, one way 5 Amp complete all as specified and directed. |
| 36 | Supply and fix High quility LED T8 indoor batten tube light 20 Watt with aluminium extrusion in D shaped have large diameter for increased convection heat transferincl one LED PC tube rod and driver,internaly pre wired of 1.5 sqmm twin twisted flexible cable, Including marking of CA No on batten all as specified & directed.NOTE: The contractor must submit 5 years warranty for LED fitiings. |
| 37 | Supply and fix High quility LED T5 integrated batten tube light 20 Watt with aluminium extrusion with frosted PMMA/PC diffuser,internaly pre wired of 1.5 sqmm twin twisted flexible cable ,Including marking of CA No on battenall as specified & directed.NOTE: The contractor must submit 5 years warranty for LED fitiings. |
| 38 | S & F in repair MCB single pole, 240 volts, 5 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type in the MCB DB including taking down complete all as specified and directed. |
| 39 | S & F in repair MCB Double pole, 240 volts, 16-32 Amp, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed. |
| 40 | S & F in repair MCB Four pole, 415 volts, 40 to 100 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed. |
| 41 | S&F in repair sheet metal enclosure for DBs(double door type)single pole and neutral 8 way including blacking platge as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed . |
| 42 | S&F in repair sheet metal enclosure for DBs(double door type)single pole and neutral 12 way including blacking platge as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed . |
| 43 | S&F in repair sheet metal enclosure for DBs(double door type)single pole and neutral 4 way including blacking platge as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed . |
| 44 | S&F in repair sheet metal enclosure for DBs(double door type) Triple pole and neutral 4 way including blacking platge as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed. |
| 45 | Taking out old U/S Sub main wiring for replacement includingS&F sub main wiring withtwo single core FRLSPVC insulated and sheathed 1100 Volts grade,4 Sqmm size cables, PVC insulated stranded copper conductor fixed in PVC conduite pipe 25mmdia with all accessories and one continuous run of 4 Sqmm copper conductor PVC(Note :-Two single core cables along with earth wire and conduit shall be measured as one unit length). |
| 46 | Taking out old U/S Sub main wiring for replacement includingS&F sub main wiring withtwo single core FRLSPVC insulated and sheathed 1100 Volts grade,6 Sqmm size cables, PVC insulated stranded copper conductor fixed in PVC conduite pipe 25mmdia with all accessories and one continuous run of 6.0 Sqmm copper conductor PVC(Note :-Two single core cables along with earth wire and conduit shall be measured as one unit length). |
| 47 | S&F sub main wiring withtwo single core FRLSPVC insulated and sheathed 1100 Volts grade,10 Sqmm size cables, PVC insulated stranded copper conductor fixed in PVC conduite pipe 25mmdia with all accessories and one continuous run of 10.0 Sqmm copper conductor PVC(Note :-Two single core cables along with earth wire and conduit shall be measured as one unit length). |
| 48 | Taking out old U/S service connection cable for replacement including S&F service connection cable, 1100 volts grade heavy duty PVC insulated aluminium conductor, 10 Sqmm 2 core size, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mmsuspensionwire, one twin core cable flat or circular, complete all as specified and directed. |
| 49 | Taking out old U/S service connection cable for replacement including S&F service connection cable, 1100 volts grade heavy duty PVC insulated aluminium conductor, 16 Sqmm 2 core size, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mmsuspensionwire, one twin core cable flat or circular, complete all as specified and directed. |
| 50 | M&L for earthing complete with galvanised steel,earth plate electrode 600x600mm x 6mm thick burried directly in ground verticaly (earth pit not less than 2.25 mtrs belowground level ) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electrical plate No 3 on page 497 of MES schedule 2009 part - I connected to main switch board/main DBs/earthing test point including all necessary excavation and earth work in hard/dense soil common salt and charcoal dust mixed and packed 150mm thick all round the GI earth plate, watering pipe 20mm dia GI medium grade. GI sheet 0.63 mm thick funnel, wire gauge, 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS round bars 6mm dia @ 150c/c both ways and pit/chamber in PCC 1:3:6 type C1 with suitable lifting handleto cover, GI protection pipe 15mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete all as specified and directed.Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost. |
| 51 | Supply and fix High quility LEDlighting fixture mirror type with high output diffuser 2 feet 1x 10 Watt. 220V AC,complete with polycarbonate tube, white/warm white suitable for mirror light internally pre wired of 1.5 sqmm three core flexible cable complete all as specified & directed.Make: Havells/Bajaj/PhilipsNOTE: The contractor must submit 5 years warranty for LED fitiings. |
| 52 | Supply and fix high quality indoor LED PLL base lamp 4 pin, 18 Watt (with inbuild driver) complete all as specified and directed.Make: Havells/Bajaj/PhilipsNOTE: The contractor must submit 5 years warranty for LED fitiings. |
| 53 | S & F Exhaust fan plastic body heavy duty ISI mark, 250 mm size with louvers including all connecting accessories and cutting opening on wall and making good as per existing surface complete all as specified and directed |
| 54 | S&F Exhaustfan metallic bady ISI mark, 300 mm size with bladesand frame and louvers including cutting openings, through brick/ stone wall , making of holes and grouting of suitable size of nuts and bolts for 300 mm exhaust fan and making good dismantled portion and making connection with wire of suitable size and connecting accesssories complete all as specified and directed. |
| 55 | Taking down for Repair of Exhaust fan of size 250 mm to 450 mm sweep of any type including replacement of burned copper winding, bearing and any other accessories and refixing after repair with suitable size nut bolts and wire complete all as specified and directed. |
| 56 | Supply and fix in replacement High quility LED T8tube rod 20 Watt (with inbuild driver) with single side connection including connection with wire of 1.5 sqmm twin twisted flexible cable complete all as specified & directed. Make :Bajaj/Havells/Philips NOTE: The contractor must submit 5 years warranty for LED fitiings. |
| 57 | S & F in repairs Plug top 3 pin 15 amp, complete all as specified and directed |
| 58 | S & F Recess mounting LED 300x300 mm luminaire,18 W, 230v, suitable for Recessed mounting ,with powder coated CRCA housing with LEDs, seamless front frame complete with driver and all accessories internally pre-wired and including necessary cutting as required in panel and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.Make : Bajaj,Havells, PhilipsNOTE: The contractor must submit 5 years warranty for LED fitiings. |
| 59 | S & F Recess mounting LED luminaire 600mm x 600 mm ,36 W, 220v, with high efficiency PMMA diffuser soft glare free light suitable for recessed mounting ,with powder coated CRCA housing with LEDs, seamless front frame complete with driver and all accessories internally pre-wired and including necessary cutting as required in panel and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make : Bajaj/Havells/ PhilipsNOTE: The contractor must submit 5 years warranty for LED fitiings. |
| 60 | S & F surface mounting LED 300x300 mm luminaire,18 W, 230v, suitable for surface mounting ,with powder coated CRCA housing with LEDs, seamless front frame complete with driver and all accessories internally pre-wired and including necessary cutting as required in panel and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.Make : Bajaj,Havells, PhilipsNOTE: The contractor must submit 5 years warranty for LED fitiings. |
| 61 | S & F in replacement bldg security light luminaires of 25 watt LED suitable for 220-230 V, 50 Hz with IP 65 protection including bracket for fixing fitting made of 32mm bore light grade GI pipe connecting up with three core twisted flexible copper conductor cablecomplete all as specified and directed. MakeBajaj/Havells/ PhilipsNOTE: The contractor must submit 5 years warranty for LED fitiings. |
| 62 | S & FLED post top lantern suitable for 30W gate lights with diffuser and made in fully cast aluminium body finished with polyurethane paint with acrylic window cover complete with all accessories and base plate including LED lamp & PCC work (1:3:6 ) for fixing the light fitting and connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed. Make : Mepro Cat part No PTL-0003 or equivalent NOTE: The contractor must submit 5 years warranty for LED fitiings. |
| 63 | S & FLED bulk head fitting, 1 x 10 watt with PDC aluminium housing and milky diffuser complete with all accessories and including LED light driver holder connecting up with three core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed.Make : Bajaj//Philips/HavellsNOTE: The contractor must submit 5 years warranty for LED fitiings. |
| 64 | S & F for flexible LED strip (5m roll), 24 W suitable for cove/column light with driver including connecting up, 230 volt, 50 Hz of MakeHavells/Bajaj/Philips/C&S complete all as specified and directed.Make : Bajaj//Philips/HavellsNOTE: The contractor must submit 5 years warranty for LED fitiings. |
| 65 | S&F LED luminaire wall bracket type, made in fully cast aluminium body finished with polyurethane paint with nipple having B22 holder incl 05/6 watt LED bulb of Make Mepro Cat part No: AL-135 or equivalent make in Bajaj/Havells complete all as specified and directed. NOTE: The contractor must submit 5 years warranty for LED fitiings. |
| 66 | S&F recess mounted LED downlighter aluminium heat sink type, 9 watt with PC diffuser in white powder coated finish with integrated driver of Make Havells/Bajaj/Philips complete all as specified and directed. NOTE: The contractor must submit 5 years warranty for LED fitiings. |
| 67 | S & FLED bollard fitting suitable for 20 Watt LED bulb with B-22 porcelain holder with cover fully cast aluminium body finished with polyurethane paint (with prior treatment) with acrylic window cover &including all fittings (Total length of fitting 1365 mm) and LED warm white bulb 12 Watt as per Cat Part No MBL-M-003 of make Mepro electrical or equivalent of other make as approved by GE, complete with all accessories and including PCC work (1:3:6 ) for fixing the light fitting and connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed. NOTE: The contractor must submit 5 years warranty for LED fitiings. |
| 68 | S & FLED bollard fitting 10 Watt LED with contemporary UFO shape design IP65 with minimum upward light component, ensuring excellent distribution and high system lumen efficacy as per Cat Part No UFOBLS10WLED830PSYMTOPCM of make Havells or equivalent of other make as approved by GE, complete with all accessories and including PCC work (1:3:6 ) for fixing the light fitting and connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed. NOTE: The contractor must submit 5 years warranty for LED fitiings. |
| 69 | Taking out old U/S Sub main wiring for replacement includingS&F sub main wiring withtwo single core FRLSPVC insulated and sheathed 1100 Volts grade,2.5 Sqmm size cables, PVC insulated stranded copper conductor fixed in PVC conduite pipe 25mmdia with all accessories and one continuous run of 2.5 Sqmm copper conductor PVC(Note :-Two single core cables along with earth wire and conduit shall be measured as one unit length). |
| 70 | S & F in replacement LED Flood light luminaires of 120 watt230 V AC with IP 66 outdoor type with thermal management in multiple optics with impact and corrosion resistant complete with driver and lamp and connecting up with three core twisted flexible copper conductor cablecomplete all as specified and directed. Make Bajaj/Havells/PhilipsNOTE: The contractor must submit 5 years warranty for LED fitiings. |
| 71 | S & F surface mounting LED luminaire 600mm x 600 mm ,36 W, 220v, with high efficiency PMMA diffuser soft glare free light suitable for surface mounting ,with powder coated CRCA housing with LEDs, seamless front frame complete with driver and all accessories internally pre-wired and including necessary cutting as required in panel and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make :Bajaj/Havells/PhilipsNOTE: The contractor must submit 5 years warranty for LED fitiings. |
| 72 | Supply and fix High quality LED smart batten tubelight 20 W, aesthetically designed LED having extruded aluminum housing with Microwave motion technology for providing an energy efficient solution and with aluminum housing & integrated electronic driver.,internaly pre wired of 1.5 sqmm twin twisted flexible cable of make Havells with cat part no.LUMILINESMART20WLED865PCWH or equivalent, Including marking of CA No on batten all as specified & directed.NOTE: The contractor must submit 5 years warranty for LED fitiings. |
| 73 | S & FLED solar pillar light /gate light with built in solar panel, LED light and lithium battery with charge controllercomplete with all accessories including PCC work (1:3:6 ) for fixing the light fitting complete all as specified and directed. Make : Havells Cat part No VILLA1W5700K solar gate light or equivalent NOTE: The contractor must submit 5 years warranty for LED fitiings. |
| 74 | S & F Recess mounting LED luminaire 600mm x 600 mm, 36 W, 220v, with high efficiency deep inserted 16x mini lens modules with light enhancing technology which ensures high efficacy and excellent visual comfort offering UGR<16 with sleekest 18mm backlit design that can easily accomodate in low depth ceilings including flicker free driver and all accessories internally pre-wired and including necessary cutting as required in panel and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make : Havells cat part no OLIVIA2X2PLR18-36WLED857UGR16MOD or equivalent make in Bajaj,PhilipsNOTE: The contractor must submit 5 years warranty for LED fitiings. |
| 75 | S & Fsurface suspended LED luminaire, 36 W, 230 volt, suitable for suspended mounting with extruded aluminium in powder coated housing panel for surface mounting which produces continuous lines of light distribution complete with driver and all accessories internally pre wired and including suspension kit and surface mounting kit and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed of make Havells cat part No.- DESTG250LP/S36WLED840SWH1130 or its equivalent cat part in make Bajaj,Philips.NOTE: The contractor must submit 5 years warranty for LED fitiings. |
| 76 | S & FLED spot down light for general and accent lighting with deep recessed antiglare light, 10 watt including driver and module complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed.make Havells cat part No.- UNECOBRITER10WLED827S24 or its equivalent cat part in make Bajaj,Philips.NOTE: The contractor must submit 5 years warranty for LED fitiings. |
| 77 | S & F for LED foot/step light 7W water proof suitable for staircase and wall including connecting up, 230 volt, 50 Hz of MakeHavells/Philips/Bajaj complete all as specified and diected. NOTE: The contractor must submit 5 years manufacturer warranty on LED fitiings.NOTE: The contractor must submit 5 years warranty for LED fitiings. |
| 78 | S & F in repair surface suspended LED circular luminaire, 25 W, 230 volt, suitable for suspended mounting with CNC stretch bent extruded aluminium in powder coated housing panel for surface mounting with an effective height of 70 mm and produces diffused planar and low glarel illumination complete with driver and all accessories internally pre wired and including suspension kit and surface mounting kit and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed of make Havells cat part No.- TORUS600RDP/S25WLED857SPMMAWH or its equivalent cat part in make Bajaj,Philips.NOTE: The contractor must submit 5 years warranty for LED fitiings. |
| 79 | Taking down old defective LED ceiling lights/bldg sec.lights of capacity 18W to 36W for repair and refixing it on surface/recess/bldg wall after repair incl replacing old unserviceable driver / LED plate or any other items/accessories as required on site to make the light fitting serviceable complete all as specified and directed |
| 80 | S&F in repair 6 core control cable to connect meter to parallel Home display split unit for remote access of data/operation including two cable end connectors(RJ-11), punching complete all as specified and directed. |
