|
| 1 | SCHEDULE \"A\" |
| 2 | SCHEDULE \"A\" PART-I (Building Work)Lump sum price worked out by the contractor for \"Building Work\" as listed in Schedule \"A\" Part-I against the lump sum price inserted by the MES. |
| 3 | Sch \"A\" Part-II(Internal Water supply)Lump sum price worked out by the contractor for Internal Water supply\" as listed in Schedule \"A\" Part-II against the lump sum price inserted by the MES. |
| 4 | Sch \"A\" Part-III(Internal Electric Supply)Lump sum price worked out by the contractor for \"Internal Electric Supply\" as listed in Schedule \"A\" Part-III against the lump sum price inserted by the MES. |
| 5 | Sch \"A\" Part-IV(External Water supply)Lump sum price worked out by the contractor for \"External Water supply\" as listed in Schedule \"A\" Part-IV against the lump sum price inserted by the MES. |
| 6 | Sch \"A\" Part-V(External Electrification)Lump sum price worked out by the contractor for\"External Electrification\" as listed in Schedule \"A\" Part-V against the lump sum price inserted by the MES. |
| 7 | Sch \"A\" Part-VI (Road, Path and Culvert)Lump sum price worked out by the contractor for \"Road Path and Culvert\" as listed in Schedule \"A\" Part-VI against the lump sum price inserted by the MES. |
| 8 | Sch \"A\" Part-VII (Sewage Disposal)Lump sum price worked out by the contractor for \"Sewage Disposal \" as listed in Schedule \"A\" Part-VII against the lump sum price inserted by the MES. |
| 9 | Sch \"A\" Part-VIII (Area Drainage)Lump sum price worked out by the contractor for \"Area Drainage \" as listed in Schedule \"A\" Part-VIII against the lump sum price inserted by the MES. |
| 10 | Sch \"A\" Part-IX(Site Clearance)Lump sum price worked out by the contractor for \"Site Clearance\" as listed in Schedule \"A\" Part-IX against the lump sum priceinserted by the MES. |
| 11 | Sch \"A\" Part-X(Retaining Wall) Lump sum price worked out by the contractor for \"Retaining Wall\" as listed in Schedule \"A\" Part-X against the lump sum priceinserted by the MES. |
| 12 | Sch \"A\" Part-XI (Refrigeration and Air Conditioning) Lump sum price worked out by the contractor for \"Refrigeration and Air Conditioning\" as listed in Schedule \"A\" Part- XI against the lump sum priceinserted by the MES. |
| 13 | Note for Srl No 2 to 12The percentage above / below the SSR -2020 (part-II) rates shall be derived from the amount quoted by the contractor against Srl No. 2 to 12by comparing it with the amount inserted / pre- priced by the department and the same shall be applicable for the items of respective schedule |
| 14 | Schedule \"A\" Part-XII (Miscellaneous Items) |
| 15 | Internal Water Supply |
| 16 | Item No 01:S&F for CP Towel rail 600mm long fixed with an incl chromium plated brass screw and wooden cleat (min wt 190 gms) complete all as specified and directed |
| 17 | Item No 02:S&F for CP Towel ring of dia 250 mm fixed with an incl chromium plated brass screw and wooden cleat (min wt 190 gms) complete all as specified and directed |
| 18 | Item No 03:Supply and fixing of brass extension nipple 15mm dia or 50-75mm long alongwith SS cover plate complete all as specified. |
| 19 | Item No 04: S&F CP Health faucet mild steel chromium plated suitable for 15mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 20 | Item No 05: S&F for CP jet sprey of length 1.25m long fixed in position. Complete all as specified and directed |
| 21 | Item No 06: S&F Brass CP WHB mixer central hole 15mm dia for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed |
| 22 | Internal Electrification |
| 23 | Item No 07: S & F modular type TV Socket out let complete all as specified and as directed. |
| 24 | Item No 08: S & F modular type LAN Socket RJ 45 with complete box |
| 25 | Item No 09: S & F modular type Telephone socketRJ 11/12 with complete box |
| 26 | Item No 10: S & F modular metal flush box 8 module complete all as specified and directed. |
| 27 | Item No 11: S & Fmodular MCB protected socket comprising of 24A MCB C curve, and 16/20 A Socket for AC/Geyser, modular switch 16A complete with Sheet metal Enclosurefor 230 volt 50 Hz ACincludingall acessories asone complete setall as specified and as directed . |
| 28 | Item No 12: S&F wall mount fan 400 mm,3 bladesbutton control ,material aluminium powder coated finish with cord , blade of plasic material including all fixing arrangement complete all as specified. |
| 29 | Item No 13: S&F wall mount Electric Kitchen Chimneys heat auto clean with motion sensor auto off function, touch sensor control LED lighting, metal housing brushless DC motor, LPG Leakage sensor, auto clean alarm, mood light, material tempered glass, noise level not less than 70dB of size 90cm and suction power 1500m3/hr with suitable size of flexible aluminium pipe forchimney exhaust (up to 20 feet 4/6 inch) including all fixing arrangement complete 6 way silent filterless, 12 yr warranty on motor (5 yr comprehensive), Autoclean alarm Mood Lt.Make - Faber/Inalsa/Glean |
| 30 | External Water Supply |
| 31 | Item No 14: Supply and fix Valves, Sluice, flanged of class 1.6 PN , 80 mm (3”) dia. Complete all as specified and directed by Engr-in -charge. |
| 32 | External Electrification |
| 33 | Item No 15 : S &F junction box of size 25x20x15cm made out of 2mm thick CRCA sheet factory fabricated out door type powder coated in smoke grey colour (approved make )for housing 4 way 32Amps rating heavy duty connector including one MCB SP 25 Amps rating for contorling of street light and to fixed on street pole with nuts clamps of size FI 32x6 mm-02 Nos all as required at site complete as specified and directed. |
| 34 | Item No 16 : Supply, fabricating, erecting LT Panel board out door type CPRI approved,as per IS 8623double door totally enclosed weather and vermin proof suitably ventilated 415 Volts, 50 cycles, AC supply, factory made fully compartmentalized made out of 3.00 mm thick CRCA sheet steel for load bearing and 2.00 mm thick for non-load bearing protection of enclosure IP 54 as per IS-2147 of 1962 with pretreatmentand powder coated of approved colour including suitable size angle iron/flat iron frame work / support, required civil works, excavation & earth work, PCC foundation etc, installation, testing & commissioning with & including following : |
| 35 | INCOMING (a) Copperbusbar suitable for 400 Awrapped with PVC sleeves with maintained the colour code and provision of making holes with nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 nos.(b) MCCB IP 44 and IP 66/67 protection, 4 pole, 415 volts, Lcu=36 KA breaking capacity, rating 320 Amps, adjustable thermal magnetic release including all fixing accessories with both ends spreader links-01No.(c) Digital voltmeter of range (0-500) volts, flush mounting type of size 100mm x 100mm (4\"x4\") square dial with selector switch - 01 Nos (Make : Legrand/Schneider/L&T)(d) LED Neon indicator lamp (RYB) with holder, 230/250 volts, AC -01 set (set of three) Make:-AE, L&T |
| 36 | OUTGOING(a) MCCB IP 44 and IP 66/67 protection, 4 pole, 415 volts, Lcu=36 KA breaking capacity, rating 160 Amps, adjustable thermal magnetic release including all fixing accessories with both ends spreader links-03 Nos (02 Nos for 1st floor & 2nd floor and 01 standby)(b) MCB, Tripple pole & neutral, 40 amps, 415 volts, \"C\" curve, 10 KA all complete as specified and as directed - 1 No (Street light) |
| 37 | Sewage Disposal |
| 38 | Item No 17 :M&L forDouble Wall Corrugated HDPE Pipe147mm ID and 175 mm OD class SN-8 sewage pipe laying & testing till made functional on ground complete all as specified and directed. |
| 39 | Item No 18 : Septic tanks, excavation in oridinary soil, foundation in PCC, brick work in CM 1:4, RCC/CI manhole covers (HD), vent shaft and sludge chambers etc, complete for 100 users complete all as specified and directed. |
| 40 | Item No 19 : Soakage wells, excavating in oridnary soil, foundation in PCC 1:3:6, walls of honey combed and solid brick work in CM, RCC cover slab, filling with brick bats, complete of size 2.4M dia x 3.0M depth complete all as specified and directed. |
| 41 | Refrigeration and Air Conditioning |
| 42 | Item No 20 :Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 90 V to 300 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 3.00KVA. |
| 43 | Item No 21 :Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with accuracy of ± 2.5% and of capacity 1.00KVA. |
| 44 | Item No 22 :Supply and fix refrigerator, electric driven (Single phase) capacity near 230 litres 5 star rated complete all as specified and directed by Engr-in-charge. |
| 45 | Furniture Items |
| 46 | Item No 23 :Chair Easy (FD-229)Timber : All wood work shall be 1st class MP Teak wood well seasoned free from all defect and knots.Cane: Caning shall be of with 2.0 mm wide and 0.4mm thick plastic cane half round of superior quality white or cream colour woven to the pattern all as shown on the drawing and as approved by the EIC (Godrej Pattern). Strengthening band shall be of 3.5mm wide plastic cane.Make: Premier/Shah/Garware.Ring: Hard PVC ring shall be 20mm dia screwed to bottom of the legs.Polish: All expose wooden surface shall be French polished glossy finish. Rest: All as per drawings. |
| 47 | Item No 24 :Table 900mm x 600x 760mm (FD-231)Timber : All wood work shall be 1st class MP Teak wood well seasoned free from all defect and knots.Wooden clamps support size to be provided screwed with long rain and leg inner side for extra strength of beds as directed as EIC. Top 18mm Pre-laminate MDF board exterior grade IS-12823. Beading shall be 4mm teak wood fixed with head less nail. |
| 48 | Item No 25 :Chair writing (FD-280)Timber : All wood work shall be 1st class MP Teak wood well seasoned free from all defect and knots.Cane: Caning shall be of with 2.0 mm wide and 0.4mm thick plastic cane half round of superior quality white or cream colour woven to the pattern all as shown on the drawing and as approved by the EIC (Godrej Pattern). Strengthening band shall be of 3.5mm wide plastic cane.Make: Premier/Shah/Garware.Ring: Hard PVC ring shall be 20mm dia screwed to bottom of the legs.Polish: All expose wooden surface shall be French polished glossy finish. Rest: All as per drawings and directed by EIC. |
| 49 | Item No 26 :Charpoy IP with Hard Top (FD-220)Pipe: Square pipe 32mm sq. 1.6mm th. For legs, 65mmx25mm rectangular 1.6mm th for long rails and short rails, 25mm sq. Stifferners under 12mm plywood and stifferners between legs to the short side shall be used. 4mm th MS plates shall be welded at the bottom of the legs.Plywood: 12mm plywoodd (BWP) grade ISI Marked for the top shall be fixed with round head nut & bolt.Make: Green Ply/Century Ply/Kit Ply.Finish: Black 7 stages pre treated powder coating as shown on drawing.Rest:All as per drawings and directed by EIC. |
| 50 | Item No 27 :Locker bed side steel (FD-1029)Sheet: MS Sheet 1mm for shutter, shelf sides, back and bottom shall be used. Fitting: Chromium plated handle with a three way locking device shall be provided as shown on drawing. Brass lock 6 leaver of Godrej/Harrison.Painting: POWDER COATING: All steel components shall be pre treated 7 stages epoxy powder coating shall be done. |
| 51 | Item No 28 :Display Board (900 x 600 mm) (FD-1042) : All as shown drawing. Overall size shall be 900mm 16ng,75mm deep and 600mm high. 25mmx75mm particle board frame of commercial face with 6mm thick PARTICLE BOARD edging at-round shan be provided as shown on drawing. 19mm thick soft wood board shall be fixed in side the frame over which best quality green baize cloth shall be fixed as shown on drawing. Aluminium flat -of 63mmx3.25mm shall be provided ai-round at the back of the board. On front side 22mmx10 mm aluminium channel shall be provided in side of particle board frame to house 4mm thick glass shutter. Rest: All as shown on the drawing & as directed by Engr-in-charge |
| 52 | Item No 29 :Chair Dining (FD-279): All as shown on drawing. Overall size shall be 440mm long, 430mm wide and890mm high. All wood shall be of first class hard wood teak(MP). Front legs shall be 30mmx55mm in section throughout up to 460mm high. Rear legs shall be 30mmx55mm in section and 890mm high: The distance between outer side of legs in front shall be 440mm and the distance between outer side of legs in the rear shall be 405mm. The legs shall be joined with front, sides and rear rails made to shape out of 30mmx65mmin section. Two side stiffener in short sides shall be provided of20mmx25mm in section, One stiffener of 20mmx25mm in section shall bne provided inthe middle of short stiffeners, joining short stiffeners. Back horizontal rests, two in numbers, of 45mmx15mm made slightly curved in shape out of 45mmx35mm in section wood shall be provided one at 18mm below the top of rear legs and other below 45mm from the bottom of top horizontal rail. Caning shall be done without any joint in the cane, The cane shall be 2mm wide O.4mm thick half round gola type of Shah or Premier brand and woven in Godrej pattern. The cane shall weigh not less than 6gms per ten running metre. All wood surfaces exposed to view when placed in position shall be French polished with high gloss finish. Hard rubber/PVC shoes shall be screwed to the bottom of all legs. Rest: All as shown on the drawing & as direc ted by Engr-in-charge |
| 53 | Item No 30 :Receptacle Large (FD- 82(M)) : Receptacle: Receptacle shall be all as per drawing and as specified. Receptacle shall be covered with lid and handle in bright colour Red, Blue, green. |
| 54 | Item No 31 :Table Dining 06 Pers (FD- 273/376): Timber : All wood work shall be 1 st classMP Teak wood well seasoned free from all defect and knots . Wooden clamps support of suitable size to be provided screwed with long rail and leg inner side for extra strength as directed by Engr-in-Charge.TOP: 18 mm Pre laminate PARTICLE BOARD board exterior grade.Make Green Panel Max/Action Tesa. Beading shall be 4mm teak wood fixed with head less nail.Shoes: Hard rubber/PVC shoes shall be provided at bottom of legs.Polish: All expose wooden surface shall be French polish glossy finish.Rest:All as shown on the drawing & as direc ted by Engr-in-charge |
| 55 | Item No 32 :Side Racks w/trays steel (FD-1023/97/9M) : All as shown on drg. Overall size 840mm long350mm wide and 810mm high. Floour MS angle iron 40mm x 40mm x 3mm shall be provided as legs and shall be 810mm high. MS sheet 1mm thick shelves made to shape shall be welded to angle iron legs at 100mm from bottom and 50mm from top. Top shelf shall have three compartments or spaces equally spared with 50 mm high partition and back covered with MS sheet 1mm thick. Painting : 7 stages pre treated Powder Coating shall be done. Rest: All as shown on the drawing & as direc ted by Engr-in-charge |
| 56 | Item No 33 :Stool Steel (510 mm High) (FD-81(M)):(a) Over all size shall be 305x305X510 mm (l xw x h). Stool shall be made out of 1 mm thick mild steel.(b) Finish all steel work shall be painted with two coats of OG paint with acoat of red oxide primer complete. PVC rubber shoes shall be fixed with bottam of the legsBlack 7 stages pre treated Powder Coating as shown on drawing.(c) Rest : All as shown on drawing & as directed by Engr-in-Charge |
| 57 | Item No 34 :Safe Meat and Milk (BD -405): (a) All wood work shall be 1 st class hard wood MP teak.(b) Front shutters of wire gauge shall be provided with 50 mm x 19 mm section rails and styles. Wire gauge shall be 12 mm mesh and of 20gauge.(c) Top shall be of 25mm polished thick marble with edges smooth round polished complete as directed by GE.(d) All wooden surfaces to be painted with two coat of white synthetic enamel paint over a coat of red oxide primer.(e) Rest : All as shown on drawing & as directed by Engr-in-Charge |
| 58 | Item No 35 :Table Cook House (FD-1019):All as shown on drawing. Overall size shall be 900mmx540mmx840mm. Steel frame shall be of 850mmx490mmx815mm. Four legs shall be of 25mm square mild steel tube of wall thickness 1.6mm. Legs shall be connected together in long and short sides with top railsof 25mm square mild steel tube of wall thickness 1.6mm. Top rails in long and short sides shall be joined in the middle by 25mm square mild steel tube of wall thickness 1.6mm stiffeners for the support of top of table. Two short stiffeners joining the legs in short sides shall be provided at 1OOmmfrom bottom of legs with 25mm square mild steel tube of wall thickness 1.6mm. Two side stiffeners shall be fixed together inthe middle by a long stiffener ·of25mm square mild steel tube of wall thickness 1.6mm. Top of table shall be of 25mm thick polished Kotah stone all as shown on drawing. Steel surfaces exposed to view when placed in position shall be given two coats of enamel paint over a coat of primer with spray machine after preparation of steel surfaces. Rest : All as shown on drawing & as directed by Engr-in-Charge |
| 59 | Item No 36 :Hot Case Small (FD- 363):Hot caseshall be all as per drawing and as specified. All as shown on drawing & as directed by Engr-in-Charge. |
| 60 | Item No 37 :Form without back (FD- 1027):All as shown on drawing. Overall size shall be 1525mm long, 300mm wide and 450mm high.The width is 300mm at bottom and 255mm at top of wooden plank. Legs shall be of 25mm mild steel square tube of wall thickness 1.6mm. Steel frame of legs shall be 300mm wide at bottom and 205mm wide at top. Legs at top shall be joined by steel stiffener of 25mm mild steel square tube of wall thickness 1.6mm and also at 50mm from bottom of legs. Legs shall be joined in center by a long stiffener made to shape and shall be of 25mm mild steel square tube of wall thickness 1.6mm. Top shall be of 25mm thick particle board with standard PVC edging ai-round. Legs shall have hard rubber/PVC toes or shoes at the bottom of legs. All steel surfaces exposed to view when placed in position shall be given two coats of enamel paint over a coat of primer with spray machine after preparation of surfaces. Wood surfaces shall be given\" high gloss French polish. Rest : All as shown on drawing & as directed by Engr-in-Charge. |
| 61 | Solar Water Heating System |
| 62 | Item No 38 :Supply and connection to bathroom Solar water heating system with heat exchanger type for cold reason of 300 ltr capacity, with electrical heating backup of 4 KW and make up water tank Rest:All as per drawings. |
