|
| 1 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) and removing the demolished material out of MOD land complete all as specified and directed. |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding, removing the rubbish off the premises of MOD land complete all as specified and directed . |
| 3 | Dismantling stone slabs and tiles of any thickness laid bedded and pointed in any mortar, removing the rubbish off the premises of MOD land complete all as specified. |
| 4 | M&L for 25mm thick plain cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) as in floors complete. |
| 5 | M&L for non skid joint free coloured ceramictiles 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and joint in neat cement slurry and point in coloured cement to match the shade of tile including 15 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 6 | M&L for double charged/ultra charged vitrified ceramic tiles (Acid & Alkali Resistant) 10 mm thick (square/rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 7 | M&L for Granite /Marble /wood texture vitrified ceramic 10 mmthick in vertical surfaces. area of each tile n exc 0.36 Sqm, set and jointed in neat cement slurry and pointed inwhite or coloured cement to match the shade of tile, including 10mm thick backing coat of CM 1:4 complete all as specified and directed . |
| 8 | M&L for Glazed coloured ceramic tiles in vertical surface 350x 250x 7mm / 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, including 10 mm thick backing coat in CM 1:4 all as specified and directed. |
| 9 | M&L for Designer vitrified wall tiles of size 600 x 1200mm laid in required pattern on vertical surface set and jointed in 10 mm thick heavy duty, chemical resistant adhesive for fixing tiles on wall, laying plastic sheetcover on wall/ flooring and removing when directed. Note: Tiles shall be free from any variation in colour or texture. |
| 10 | M&L for Swimming pool any coloured approved by Engr-in-Charge(Make Italia or Glasika to match existing tile colour & pattern) Glass mosiac tile fixed over 5mm thick 325 MYK Laticrete adhesive laid with 2 mm spacers and filling joints with MYK Laticrete Grout pressed with rubber trowel to remove excess grout with damp spongs and subsequentlywith dry rag complete. |
| 11 | M&L for Johonson Endura DG Flocept LT 300x300x10mm tile in floors etc set and joint in neat cement slurrytop 2 to 3 mm layer of Fosroc Nitotile GPX polymer modified adhesive and pointed in coloured cement to match the shade of tile complete all as specified. |
| 12 | M&L for 15mm thick Screed bedor beeding layer of mortar in CM 1:6 for laying floor finishes complete. |
| 13 | M&L in repairs for pool return scum channel Grating, PP made, UV stabliized, slip resistant along with PVC made support profile size of grating 295mm x 35mm (H) liquid handled circulating pool water/ ambient temperature complete all as specified and directed |
| 14 | M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust and jointed with Granite epoxy/silicone glue to match with shade of granite including 15mm thick screed bed in CM 1:4complete. |
| 15 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations and rubbing and polishing complete |
| 16 | Taking down cement plastering on brick or concrete wall surfaces including out joints, hacking for key, scrubbing downwith water all as directed. |
| 17 | M&L for two component polymer modified flexible cementitious waterproof (breathable) coating of equivalent flexible and elastic polymer modified, 2 component cementitious coating system having UV resistance applied in 2 coats in the form of slurry at right angles by way of brush at a total consumption of 2 Kg per sqmover the vertical brick wall, curing, testing etc completed including gola vata & joints treatment complete all as specified and as directed. |
| 18 | M&L for providing 15mm thick protective levelling plaster for horizontal & vertical surfaces of average in CM (1:4) including mixed with liquid integral waterproofing admixture @ 200 ml per bag of cement, finished smooth, curing etc.complete as specified and as directed. |
| 19 | M&L for Preparing new plastered or unplastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over & including one coat of 3mm th Birla Putty and primer complete all as specified and directed. |
| 20 | M&L for preparation of old painted surfaces of brick, stone concrete, asbestos cement or plaster surface any description over 10cm girth or width, not otherwise described, applying two coat of synthetic enamel paint over one coat of primer complete all as specified and directed. |
| 21 | M & L for preparation of old or new wooden surfaces over 10 Cm width or girth including rubbing with sand paper of different sizes, filler coat,including filling thinner with fine cloth and spirit lak dana polishing two or more coats up to desired finishing as directed by Engr-in-Charge all complete as specified and directed. |
| 22 | Preparation of old painted wooden surfaces and markinglines, dashes of any description not exceeding 10 cm width and girthwith two or more coats of quick setting floor paintof approved shade on play courts all complete as directed. |
| 23 | M&L for welding in repairs, upto 10 Cm length andmetal to be welded is upto 20mm thick and upto 15 metresheightat any position for training assets, obstacles, doors, windows, fencing etc as directed including making good surfaceswith required painting and necessary scafolding, ladders, supports for welding in height, all complete as specified and directed. |
| 24 | M&L for preparation of old treatedsurfaces of anydescription, over 10cm in width orgirth, applying one coat of syntheticvarnish over one coat of wood filler liquid transparent filler coat complete all as specified and directed. |
| 25 | Taking down Chowkhats or frames exc 1.5 sqm but n.exc 4 sqm with shutters (Without taking off shutters from the frame) |
| 26 | S&F Pressed steel door frame of size 125 x 60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete all as specified. Note: The quoted rates is inclusive of one shop coat of priming. |
| 27 | M&L PCC (1:3:6) type C1 for frame filling,securing holdfast and in similar works including necesssary formwork complete. |
| 28 | S&F 30 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides covered with decorative face veneers on both sides incl approved II class Hardwood lipping all-round complete all as specified and directed. |
| 29 | S&F 30mm thick 2nd class Hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc(without sash bars), edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securingglass, gauze,etcall as specified and directed. |
| 30 | S&FStainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 31 | S&F Solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 32 | S&F Factory made solid panel PVC door shutter30 mm thick (style)consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC `C\"channel having a PVCsheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, andS&F in the frame at site as per specification and drawing. |
| 33 | S&F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed to PVC door complete. |
| 34 | S&F250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 35 | S&F 150mm long aluminium anodised handles, extruded aluminium alloy fabricated type and fixed to PVC door complete |
| 36 | S&F butt hinges extruded aluminium alloy with galvanised mild steel hing pinanodised and fixed type 100mm size C21 |
| 37 | S&F mild steel flat iron as in hold fast clamps articles conforming to FE 290 Gde 165 |
| 38 | M&L for preparation of new or previously untreated steelsurfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint . |
| 39 | M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete |
| 40 | S&F in repairs Harrison rails/drapery rod 25 mm dia mild steel , chromium plated decorative type with 02 Nos wood finished side brackets/ finilas for each curtain rod all as specified and directed. |
| 41 | M&L for complete removal of existing treatment on wall surfaces using electrical operated grinderand applying one coats of distemper oil emulsion, white or tinted over & including one coat of 3mm thick Birla Putty complete all as specified and directed. |
| 42 | M&L for complete removal of existing treatment on ceiling surfaces using electrical operated grinderand applying one coats of distemper oil emulsion, including one coat of 3mm th Birla Putty and primer complete all as specified and directed. |
| 43 | M&L for preparation of old painted wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint complete |
| 44 | M&L for preparation of old decorated plastered or unplastered surfaces incl brooming down or steel wire brushing,scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coat of white wash on wall. |
| 45 | Taking up or down steel water tubing connections of25 or 32mm bore.Note: Rate quoted up to G+4 bldg including scaffolding |
| 46 | Supplying and laying CPVC pipe SDR-11, 32mm OD with plain SDR-11 fittings on walls/celing or laying in floors or concealed, jointing with CPVC solvent cement , complete all as specified and directed.Note: Rate quoted up to G+7 bldg including scaffolding |
| 47 | Taking up or down steel tubing and connections 20 mm bore of pipe complete all as specified and directed. |
| 48 | Cutting chases, pinning in, making good to facings in brick walls where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves. lintels etc and cutting chases for concealed waer tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth complete |
| 49 | S&F forCPVC pipe SDR-11, 20mm OD with plain SDR-11 fittings on walls/ celing or laying in floors or concealed, jointed with CPVC solvent cement , complete all as specified and directed. |
| 50 | S&F in repairs Pillar taps Swan Neck Square Spout Foam Flow with Flange of PTMT any colour high pressure screwed for iron pipe of 15mm dia bore (Minimum weight 15mm-110gms complete all as spd and as directed. |
| 51 | S&F in repairs fancy type two way Bib tap standard Foam flow with flange of PTMT any colour high pressure screwed for iron pipe of 15mm dia bore, (Minimum weight 15mm-105gms) complete all as specified & directed. |
| 52 | S&F in repairs fancy type Bib tap standard Foam flow with flange of PTMT any colour high pressure screwed for iron pipe of 15mm dia bore, (Minimum weight 15mm-105gms) complete all as specified & directed. |
| 53 | S&F in repairs Showerarm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour (Minimum weight 40gms) all as spd and as directed. |
| 54 | S&F in repairsHealth faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 55 | S&F in repairs Angle stop valve of PTMT any colour high pressure screwedfor iron pipe of 15mm dia bore, (Minimum weight 15mm-90gms) complete |
| 56 | S&F in repair 600mm long PVC connection pipe fixed to 15mm dia pipe complete |
| 57 | S&F in repair 450mm long PVC connection pipe fixed to 15 mm dia pipe complete. |
| 58 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cupwashers all as spd and as directed by Engr-in-charge. |
| 59 | S&F in repair brass chromium plated bottle traps for WHB with inlet and outlet screwed for pipe 32mm bore or connections including necessary packing, union and cap and fixed complete all as spd and as directed. |
| 60 | S&F in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed by Engr-in -Charge. |
| 61 | S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 62 | S&F in repair 100mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 63 | S&F in repair ball brass valves, high pressure, with polythene float and fly nut, screwed for iron pipe or brass ferrule 25 mm bore complete all as specified and directed. |
| 64 | S&F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 25 mm bore complete all as specified and directed. |
| 65 | M&L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over 15mm thick screed bed in CM (1:4) complete all as spd. |
| 66 | M&L for rubbing, polishing of kota stone in three cuts as required, complete all as specified and directed. |
| 67 | Disconnecting existing tanks for repair, Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes, 5000Ltrcapacity including washing with bleaching powder andreconnecting cleaned tankcomplete all as specified and directed. |
| 68 | Disconnecting existing tanks exc 250 ltrs and not exc 500 ltrs., setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after cleaning and removing all scale and dirt from tanks and from mouths of circulating pipes etc |
| 69 | All as per Srl Item No 63.00above but exc 500 ltrs and not exc 1000 ltrs. |
| 70 | S & F in repair 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed |
| 71 | S & F in repair fancy type15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and directed. |
| 72 | S&F in repaired Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc.(excluding flushing cistern & flush pipe) complete in all respect all as specified. |
| 73 | S&F in repair Vitreous china wash hand basin,white, flat back, size 550 x 400 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. (Including 15mm bore CP pillar tap, waste coupling and PVC waste pipe) |
| 74 | S&F in repair 32mm dia Waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm-45gms) |
| 75 | S&F in repair Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) |
| 76 | S&F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms) |
| 77 | S & F in repair 32 mm dia waste pipe all as specified and directed. |
