|
| 1 | Taking down chowkats or frames with shutters(without taking off shutters from the frames) not exc 1.5 Sqm each and removing to or from store complete all as directed. |
| 2 | Taking down chowkats or frames with shutters(without taking off shutters from the frames)exc 1.5 Sqm but n.exc 4 Sqm each and removing to or from store complete all as directed. |
| 3 | Taking down shutters of any description n exc 1 Sqm each and removing to or from store complete all as directed. |
| 4 | Taking down shutters of any description exc 1 Sqmbut n exc 2 Sqm each and removing to or from store complete all as directed. |
| 5 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printedPVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing and as directed. |
| 6 | S & F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 7 | S&Ffactory made pressed steel door frames of size 105 X 60mmfor doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified and as directed. |
| 8 | S&F factory made pressed steel door frames of size 125 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified and as directed. |
| 9 | S&F 2nd class hard wood (seasoned) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. |
| 10 | M&L for PCC 1:3:6 , type C1 (using 20mm graded aggregate) as in filling back of pressed steel frames after applying a coat of bitumeneous paint complete all as directed.. |
| 11 | M&L for PCC 1:3:6 type C1 (using 20mm graded aggregate) as in embedding holdfasts of pressed steel frames copings bed plates, kerbs etc incld necessary formworks complete all as specified & as dirceted. |
| 12 | S&F for Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming toFe-290 Gde-E-165complete all as specified & as directed. |
| 13 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottomrails. M.S. frame shall be covered with heat moulded wood grai printedPVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing and as directed. |
| 14 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush cup board door shutter of size 18mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 15 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush type as in shelves of 18mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant fixed over and including stainless steel L shaped brakets which should withhold as average weight of 20-30 Kg and fixed with ecessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. |
| 16 | S&F factory made 35mm thick 2nd class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified & as directed. |
| 17 | S&F factory made 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified & as directed. |
| 18 | S&F factory made 30mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied andfitted to chowkats complete all as specified & as directed. |
| 19 | S&F factory made 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sidescomplete all as specified & as directed. |
| 20 | S&F 100mm long butt hinges, extruded aluminium alloy with galvanisedmild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as dirceted. |
| 21 | S&F 100mm long MSbutt hinges medium weight, cold rolled complete all as specified and as dirceted. |
| 22 | S&F 75mm long MSbutt hinges medium weight, cold rolled complete all as specified and as dirceted. |
| 23 | S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 24 | S & F for 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as dirceted. |
| 25 | S & F for 100mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as dirceted. |
| 26 | S & F for Mild Steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as dirceted. |
| 27 | S & F 150mm size Aluminium handles, cast type, anodised complete all as specified and as dirceted. |
| 28 | S & F 100mm size Aluminium handles, cast type, anodised complete all as specified and as dirceted. |
| 29 | S & F Stainless steel Magnetic door catcher Magnet of size 50x15mm fixed with stainless steel screw on shelf/sides wall and shutter complete all as specified and as directed |
| 30 | S & FNikel chromium finished Drawer channel of regular close ball bearing of heavy duty for kitchen drawer of weighing capacity of 45 Kg complete all as specified and as directed |
| 31 | S & F 75mm Stainless steel chromium plated fancy type handle for cupboard/ cabinets fixed with scres and nut complete all as specified and as directed |
| 32 | S & F 30mm width of flaps continuous (piano) hinges,brass complete all as directed. |
| 33 | S & F 75mm long hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as directed. |
| 34 | S&F powder coated aluminium frame(minimum thicknes of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as dirceted. |
| 35 | S & F for aluminum powder coated (powder coated of required colour) three track sliding windows frame top & sides of size 92 x 31.75 x 1.50mm (section No 20831) bottom of size 92 x 31.72 x 1.50mm (Soction of 20832) and shutter top & bottom of size 40 x 18 x 1.55 (section 20738) and lock side shutter frame of size 40 x 15 x 1.45mm (Section 20737) with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick glass with necessary rubber beading gasket etc complete all as specified |
| 36 | S & F for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all as specified and directed. |
| 37 | S&F powder coatedaluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m includingnecessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified |
| 38 | S&F powder coatedaluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed. |
| 39 | Hacking out old broken glass (any thickness, size, quality or description) metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as dirceted. |
| 40 | S&F 5.00mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as dirceted. |
| 41 | S&F 5.00mm thick Sheet glass, ground or obscured or frosted one on one side and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as dirceted. |
| 42 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as dirceted. |
| 43 | S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as dirceted. |
| 44 | S&F 375mm long Mild steel ordinary rat tail rod pattern springs for door including roller and roller plate complete all as specified and directed. |
| 45 | S & F stainless steel soft close hydraullic clip concealed cabinet hinges fixed with stainless steel screw complete all as specified |
| 46 | M&L for preparing new or old wood & wood based surfaces of any description, not otherwise described, treated with creosote oil complete all as specified & directed. |
| 47 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as directed. |
| 48 | Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all asdirected. |
| 49 | M & L for Brick work with using sub-class old size `B\" bricks, straight or curved on plan, exceeding 6 M mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 50 | M & L for Brick work with sub-class old size `B\" bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed. |
| 51 | M & L for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, including using water proofing compound, surface finished even and fair complete all as specified & directed. (Note : Water proofing compound shall be measured and paid separately as supply only.) |
| 52 | Supply only integral water proofing compound complete all as specified & directed. |
| 53 | M&L for preparation of new plastered surfaces of wall andand applying two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 54 | M&L for rendering 10.mm thick plaster in cm 1:6 on fair faces of brick work or concrete surfacesincluding finishing top even and smooth without using extra cement complete all as specified & directed. |
| 55 | M&L for preparation of new plastered surfaces of wall and preparing surfaces as directed and applying two coats of distemper oil emulsion over a coat of primer complete all as specified & directed. |
| 56 | Dismantling timber scantlings in unframed timber work 40 sq.cm and over in section, in any position complete all as directed. |
| 57 | M&L for 2nd class (seasoned) hard wood scantling, clean swan, timber fixed as in framed work complete all as specified and as directed. |
| 58 | Fixing only for 2nd class hard wood scantling, clean swan, timber fixed as in framed work complete all as directed. |
| 59 | Demolition of unreinforced cement Concrete floor Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as directed. |
| 60 | M&L for 40mm thick PCC , type B1 (1:2:4) (using 20mm graded crushed stone aggregates) asin floors, laid in baysfinished even and smooth, using extra cement complete all as specified and directed. |
| 61 | M&L for providing Glass dividing strips, 3 mm thick 38mm wide and inserted in position, conform to design complete all as specified and directed |
| 62 | Taking up or down steel tubing 20mm bore and connections, including cleaning for refixing or removal to store |
| 63 | Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or removal to store |
| 64 | S&F 20mm bore GI tube medium weight with all fittingsand fixed complete to wall and ceilings or laid in floors complete all as directed. |
| 65 | S&F 15mm bore GI tube medium weight with all fittingsand fixed complete to wall and ceilings or laid in floors complete all as directed. |
| 66 | S&F in repair 15mm dia stop valves fency type chromium plated with long shank and cup (concealed type)screwed down high pressurescrewedboth ends for iron pipe or unions andfixed. complete all as directed. |
| 67 | S&F in repair 20mm dia stop valves fency type chromium plated screwed down high pressurescrewedboth ends for iron pipe or unions andfixed complete all as directed. |
| 68 | S&F in repairs 15 mm dia bib taps fency type chromimum plated screwed for iron pipe or for brass ferrule and fixed complete all as directed. |
| 69 | S&F 20mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed. complete all as directed. |
| 70 | S&F in repairs 15mm dia piller taps fency type chromium plated with capstan head with long screwed shanks and fly-nuts, screwed for iron pipe. complete all as directed. |
| 71 | S&F in repairs brass chromium plated shower roses with or without swivel joints ,125mm size including fixing to steel pipe or unio n. complete all as directed. |
| 72 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. including brushing neat cement slurry with 3.0 kg of cement per sq. metre complete all as directed. |
| 73 | M&L for coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified & directed. |
| 74 | M&L for coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm as in vertical surfaces such as skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over andincluding 10mm thick renderingin cement mortar 1:4 ccomplete all as specified and as dirceted. |
| 75 | M&L for coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile exceeding 0.006 Sqm but not exceeding 0.11 sqm as in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified & directed. |
| 76 | M&L for coloured glazed cermicjoint free ceramic tilesof size 350 x 250 x 7mm /450 x 350 x 7mm thick as in vertical surfacesset and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including including 10mm thick rendering in CM 1:4 complete all as specified & directed. |
| 77 | M&L for 50 mm thick PCC 1:3:6, Type C1 (using 20mm graded crushed stone aggregates) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement including making joints with hot bitumastic mix in proportion of bitumen and sand 1:2 complete as spd & directed. |
| 78 | Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as directed. |
| 79 | S&F in repairs GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including alllaps, cutting and waste complete all as specified & as directed. |
| 80 | M&L for 10mm thick rendering in CM 1:6 on one side of lathing finished even and smooth without using extra cement complete all as specified and directed. |
| 81 | M&L for 15mm thick rendering in CM 1:4on the other side of lathing finished even and smooth without using extra cement complete all as specified and directed. |
| 82 | M&L for Chequered cement concrete tiles cast in rubber moulded glossy finish of approved colour general purpose double layer of size 25cm x 25cm x 22mm thick with mixture of white and grey cement in equal proportions and pigments set and jointed and pointed in neat cement slurry as in floor laid over and including 15mm thick screed bed / bedding of CM (1:6) complete all as specified and as directed |
| 83 | M&L for PCC 1:3:6 Type C2 (using 40mm graded aggregate as infoundations filling and mass concrete complete all as specified and directed. |
| 84 | M&L for PCC 1:2:4 Type B1 (using 20mm graded aggregate as in kerbs, copings, bed plates, kneelers etc including necessary formwork complete all as specified and directed. |
