}

Tender For Construction Of Public Distribution Shop In Chittamanur Ward No.16 At Maraimalai Nagar Municipality, maraimalai-Tamil Nadu

Municipal Adminitration And Water Supply Department has published Tender For Construction Of Public Distribution Shop In Chittamanur Ward No.16 At Maraimalai Nagar Municipality. Submission Date for this Tender is 06-06-2025. Building Work Tenders in maraimalai Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

49402389
Tender For Construction Of Public Distribution Shop In Chittamanur Ward No.16 At Maraimalai Nagar Municipality
Tender
Indian
Tamil Nadu
Maraimalai
06-06-2025

Tender Details

Construction Of Public Distribution Shop In Chittamanur Ward No.16 At Maraimalai Nagar Municipality , Earth Work Excavation For Foundation In Hard Stiff Clay, Stiff Black Cotton, Hard Red Earth, Shales Murram, Gravel,Stoney Earth And Earth Mixed With Small Size Boulders Ss.20B And Sand, Silt Or Other Loose Soil, Wet Sand,Or Silt Not Under Water, Light Black Cotton Soil, Sandy Loam Ordinary Soil And To Full Depth As May Be Directed Except In Hardrockrequiring Blasting Inclusive Of Shoring Shuttering And Baling Out Water And Cleaning And Levelling The Site Etc.,Complete 10 Cum , Footing , Plinth Beam , Supplying And Filling In Foundation Andbasement With Stone Dust In Layers Of Not More Than 15Cm Thick Well Rammed Watered And Compacted Etc., Complete Complying With Standard Specification. , Plain Cement Concrete 1:4:8 (One Part Of Cement, Four Part Of Crushed Stone Sand (M- Sand) And Eight Part Of Coarse Aggregates) Using 40Mm Size Iss Hbg Metal Including Cost And Conveyance Of All Materials To Site And Including For The Mixing, Laying And Labour Charges And All Incidential Charges Such As Water Providing Etc., Complete As Per Standard Specification , Supplying And Filling The Basement With Good Earth Filling In Layers Of Not More Than 15Cmthick Well Rammed Watered And Compacted - Etc., Complete Complying With Standard Specification. , Centering For Soffits Of Rcc Slabs Of Plane Surface Like Lintels, Beams ,Etc.,Including Strutting 3M High Using Mild Steel Sheets Of Size 90Cm X60cm X And B.G 10 Stiffened With M.S Angles Of Size 25Mm X 25Mm X 3Mm Laid Over Silver Oak (C.W) Joists Of Size 10Cm X 6.5Cm (Spaced At About 90Cm C/C )And Supported Dy Casurina Props Of 10Cm To 13Cm Dia (Spaced Of 75Cm C/C) Complying With Standard Specification And Directed - 10 M 2 (P & D)Data 38 , Column , Plinth Beam , Roof Slab , Providing And Laying In Position Standardised Concrete Mix M-20 Grade In Accordance With Is 456 - 2000 Using 20Mm And Down Graded Hard Broken Granite Stone Jelly For All Rcc Items Of Works With Minimum Cement Contenet Of 325Kg/ Cum And Maximum Water Cement Ratio Of 0.55 Including Admixture (Plasticiser / Super Plasticiser) In Recommended Proportions As Per Is 9103 To Accelerate, Related Setting Of Concrete, Improve Workability Without Imparing Strength And Durability With About (5.0Cum), 7730Kg Of 20Mm Machine Crushed Stone Jelly And With About (3.3 Cum), 5156Kg Of 10 - 12Mm Machine Crushed Stone Jelly And With About (4.79Cum) 7670 Kg Of Crushed Stone Sand (M- Sand), But Excluding Cost Of Reinforcement Grill And Fabricating Charges Centering And Shuttering But Including Laying, Vibrating With Mechanical Vibrators, Finishing, Curing, Etc And Providing Fixtures Like Fan Clamps In The Rcc Floor / Roof Slabs Wherever Necessary Without Claiming Extra Cost Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers - , Basement , Ground Floor , Suppling And Fabricating And Placing In Position Ms(Or) R.T.S. Bar For Reinforcement To All Rcc Works As Per The Design Given Including Cost Ofsteel And Binding Wire Also In All Floors. , Brick Work In Cm 1:5 (One Cement & Five Crushed Stone Sand (M- Sand)) Using Ii Class Ground Moulded Bricks Of Size 9 X 43/8X 2 3/4 Including Finishing, Curing, Etc., Complete Complying With Standard Specification - 100Cft , For Basement , Ground Floor , Plastering With Cement Mortar 1:5 (One Part Of Cement And Five Part Of Plastering Sand (P- Sand)) 12Mm, Thick In All Floors Including Cost And Conveyance Of All Materilas To Site And Labour Charges Etc,Complete As Per Standard Specifications , Plastering With Cement Mortar 1:3 (One Part Of Cement And Three Part Of Plastering Sand (P- Sand)), 10Mm Thick In All Floors Including Cost And Conveyance Of All Materilas To Site And Labour Charges Etc,Complete As Per Standard Specifications , Providing Granolithic Floor Finish Of 25Mm Thickness With Plain Cement Concrete 1:2:4 (One Cement, Two Crushed Sand (M-Sand) And Four Aggregate) Using 10 To 12Mm Gauge Hard Broken Stone Jelly Including Laying, Finishing And The Top Rubbed Smooth With Power Trawl, Thread Lining, Curing Etc. Complete Complying With Standard Specification And As Directed By The Departmental Officers. (The Rate Is Inclusive Of Necessary Planking For Panellingwherever Necessary And As Directed By The Departmental Officers) , Paving The Floor With Design Antiskirt Ceramic Tiles (Colour And Shade As Directed) Of Size 305 Mm X 305Mm X 6 Mm In All Floors Over A Base Layer Of Cement Mortar 1:3 (One Part Of Cement And Three Part Of Plastering Sand (P- Sand)), 20Mm Thick Laid In-Situ And Pointed With Same Coloured Cement , Painting Two Coats Of Newly Plastered Wall Surface With Ready Mixed Cement Paint Of First Quality And Of Approved Colour Over A Priming Coat Including Preparing The Surface, Clean Removal Of Dirt And Including Necessary Plaster Of Paris Putty Wherever Required Etc., Complete Complying With Standard Specification. , White Washing Two Coats With Freshly Burnt Shell Lime White In Colour In All Floors Including Cost Of Lime And Other Materials Brushes Scaffolding Charges Etc.Complete Complying With Standard Specification And As Directed. -100Sq.M , Supplying And Erecting Pull And Push Type Rolling Shutter With Isi Make Of Approved Size And Section Using 18 Gi Sheet. The Shutter Shall Be Painted With One Coat Of Red Oxide Primer And The Rate Is Inclusive Of Hood Covers, Transportation Charges Etc , Manufacturing Supplying And Fixing Ofmild Steel Window Made Out Of 40 X 40 X 6 Mm M.S Angle For Outer Frame, 35 X 35 X 5Mm M.S.Angle For Outer Frame Of Shutter. The Entire Shutter Area Shall Be Covered With Crc Sheets ( 18 G ) With 5Nos,Of Stiffners Using M.S.Flats Of Size 25 X 6Mm At Equal Intervals Horizontally. The Corners Of The Frames And Shutter With Crc Sheets Shall Be Welded By Adopting Flash Butt Welding Or Any Other Suitable Method. Provision Towards 3Nos, Of Hinges Incase Of Single Shutters / 6Nos,Of Hinges Incase Ofdouble Shutters Of 125 X 31 X 1.25Mm Size Placed At Appropriate Intervals And Provisions Shall Be Made For Tower Bolts 2Nos, Aldrop 1No. The Frame Shall Be Provided With 6Nos,Of Hold Fast Of 200Mm Length Using 50 X 6Mm M.S.Flat. The Entire Frame And Shutter Shall Be Provided With One Coat Of Red Oxide Primer Including Cost Of Hold Fasts,Hinges, Locking Arrangements, Handles Wind Appliences Etc., Complete And As Directed By The Departemental Officers. , Manufacturing Supplying And Fixing Ofmild Steel Door Made Out Of 50 X 50 X 6 Mm M.S Angle For Outer Frame,35 X 35 X 5Mm M.S.Angle For Outer Frame Of Shutter. The Entire Shutter Area Shall Be Covered With Crc Sheets (18 G) With 5Nos, Of Stiffners Using M.S.Flats Of Size 25 X 6Mm At Equal Intervals Horizontally. The Corners Of The Frames And Shutter With Crc Sheets Shall Be Welded By Adopting Flash Butt Welding Or Any Other Suitable Method. Provision Towards 3Nos, Of Hinges Incase Of Single Shutters / 6Nos,Of Hinges Incase Ofdouble Shutters Of 125 X 31 X 1.25Mm Size Placed At Appropriate Intervals And Provisions Shall Be Made For Tower Bolts 2Nos, Aldrop 1No. The Frame Shall Be Provided With 6Nos,Of Hold Fast Of 200Mm Length Using 50 X 6Mm M.S.Flat. The Entire Frame And Shutter Shall Be Provided With One Coat Of Red Oxide Primer Including Cost Of Hold Fasts,Hinges, Locking Arrangements, Handles Wind Appliences Etc., Complete And As Directed By The Departemental Officers. , Painting Two Coats With Ready Mixed Enamel Paint Over The New Iron Works Of Approved Quality And Colour Without Priming Coatincluding The Cost All Materials Etc.,Complete, In All Floors. , Wiring With 2 X 1.5 Sq.Mm. (22 / 0.3) Pvc Insulated Unsheathed Sc Copper Conductor Of 1100V Grade In Suitable Pvc Rigid Pipe On Wall And Ceiling With Pvc Accessories With Tw Switch Box With 5A Ft Switch Inflush With Wall Covered With Hylum Sheet Of 3Mm Thick With Painting Of Suitable Colour For Open Pvc Light / Fan Point (For Electronic Regulator) (5 Points Per Coil) Sd 18 , Wiring With 2 X 1.5 Sq.Mm. Pvc Insulated Sc Unsheathed Frls Copper Conductor Of 1100V Grade In Suitable Pvc Rigid Pipe On Wall And Ceiling With Pvc Accessories And With Tw Switch Box And 5A Ft Switch With Painting Of Suitable Colour For Open Pvc Light Point / Fan Point (For Electronic Regulator) (5 Points Per Coil) Sd 22 , Supply And Fixing Of 1200Mm (48) Sweep Ac Ceiling Fan Complete With Stepped Electronic 300W Regulator With 1 Metre Down Rod With Fan Clamp With Side Plates And Cross Arm Of Size 450Mm (18) Sd 106 , Supplying And Fixing In Position Indian Water Closet Of Size 580 X 440Mm, White Glazed Earthen Ware Of Approved Quality With P Trap Or S Trap Confirming To Is:2556 -Part Xii With Sand Cushion And Forming Flooring Alround The Closet Using 40Mm Broken Brick Jelly In Lime Concrete1:2:5 ( One Part Of Lime, Two Parts Of Sand And Five Parts Of Brick Jelly) 100Mm Thick And Finishing The Top To Required Slope And Including Giving Necessary Connection To Cast Iron Soil Pipes/ Pvc Pipes By Dismandling Brick Masonry, Reinforced Cement Concrete Roof/Floor Slab And Making Good The Disturbed Portion To Original Condition Without Leakage Etc., Complete Complying With Standard Specifications And As Directed By The Departmental Officers. , Supply And Delivery And Fixing Of 1000 Litres Hdpe Tank As Per Is 12701 / 1996 Including Loading, Unloading, Transportation And Labour Charges For Fixing Of The Gi Pipes And Specials For Pipe Connection Works Including Cutting, Threading And Fixing Charges Etc., , Supply And Delivery And Fixing Of Pvc Pipes And Specials Etc Complete , 25Mm Pvc Pipe , 25Mm Pvc Bend , 110Mm Pvc Pipe , 110Mm Pvc Bend , 110Mm Vent Cowl , Pvc Tap , Pvc Ball Valve , Supply And Fixing Of Single Box Type 440W Fluorescent Fitting Complete With Copper Choke And Condensor With Conduit Pipe Suspension From The Ceiling With Pvc Unsheathed Frls Copper Leads From Terminals To The Fitting With Tube Sd 89

Key Value

Document Fees
Refer document
EMD
INR 14000.0 /-
Tender Value
INR 14 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail