|
| 1 | Removing dry or oil bound distemper by a washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete. |
| 2 | Removing dry or oil bound distemper by a washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete and Including Ceiling and Sloping Roof. |
| 3 | Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth. |
| 4 | Scraping oil paint from steel and other metal surface and making the surface even (with Hand Scraping.) |
| 5 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint, brushing, interior to give an even shade including cleaning the surface an even shade including cleanicn the surface of all dirt, dust and other foreign matter |
| 6 | Painting two coats (excluding priming coat) on previously painted wood and wood based surface with enamel paint, to give an even shade including cleaning the of all dirt, dust and other foreignmatter. |
| 7 | Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. (Make: Asian Paints, Berger Paints, Nerolac paints or its equivalent make) |
| 8 | Providing material and labour for applying “Apex Ultima” exterior acrylic paint on New/Old Surface of required shade on undecorated wall surface to give an even shade over and finishing smooth sand papering etc. Applying three coats of “Apex Ultima” paint after thoroughly brushing the surface free from mortar dropping and other foreign matter to make the surface smooth as directed by Engineer In Charge. |
| 9 | Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. |
| 10 | Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar. |
| 11 | Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(A) Modular |
| 12 | Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in foundation and plinth (A) Modular |
| 13 | Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with grade of concrete M300 pnumatic compressed / vibrated mechanically and as per approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete. |
| 14 | Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm thick of M250 grade concret as per approved design and including excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete. |
| 15 | Providing & Laying 24\" x 24\" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for light shade. (Make: Kajaria, Somany, Orient-Bell, Varmora, Nitco, Simpolo or its equivalent make) |
| 16 | Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1- cement : 3-coarse sand ) finishing with flush pointing in whitecement. (Make: Kajaria, Somany, Orient-Bell, Varmora, Nitco, Simpolo or its equivalent make) |
| 17 | Providing and laying Vitrified tiles 8 to 10 mm thick , in skrtingrisers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement: 3-coarse sand) and jointed with white cement slurry (Make: Kajaria, Somany, Orient-Bell, Varmora, Nitco, Simpolo or its equivalent make) |
| 18 | Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry. (Make: Kajaria, Somany, Orient-Bell, Varmora, Nitco, Simpolo or its equivalent make) |
| 19 | Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift.(i) Not exceeding 3 Sq.M. in area. |
| 20 | Providing and fixing 35 mm thick shutters for Doors, windows and clear story windows including anodised alluminium butt hinges with necessary screws. Indian Teak Wood/Aluminium (iii) Partly panelled and partly glazed. |
| 21 | Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg / Rmt with colour Powder Coated alluminium frame with 5 mm thick transparent bronze colour tinted float glass as details etc complete for Fix window. (Make: Jindal, Hindalco or its equivalent make) |
| 22 | Providing and fixing flush door shutters, solid core constructionwith frame of first class hardwood with cross board and face veneer or plywood face panels, including anodised alluminiumbutt hinges with necessary screws. (B) Non-decorative type andblock board core anodised alluminium butt hinges in flush door shutters (2) 35 mm thick. |
| 23 | Supply & fixing factory finished cold formed Light guage steel frame sections confirming to SP:6 (5) 1980 at site or work including riveted, bolted or welded in builtup for all type of sections ,in framed work, cutting, hoisting, fixing in position and applying primer coat of approved steel primer etc. complete as per structural designs & directions of Engineer-in-charge. (Make: Tata, Sail, Jindal, JSW, Vedanata or its equivalent make) |
| 24 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 25 | Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm @ Wt 1.094Kg / Rmt with colour anodized alluminium frame with 5 mm thick transparent bronze colour tinted float glass with colour anodized alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for.window (Make: Jindal, Hindalco or its equivalent make) |
| 26 | Providing and fixing window having extruded aluminum Colour Powder Coated section frame main outer size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt, horizontal Three track membersize 92mm x 31.75mm x 1.30mm @ Wt.1.07 Kg/mt, vertical member of size 92mm x 31.75mm x 1.50mm ,@ Wt. 1.06 Kg/mt with sliding shutters of horizontal member size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt with 5 mm thick transparent bronze colour tinted float glass/S.S. mosquito net with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc (Make: Jindal, Hindalco or its equivalent make) |
| 27 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the directions of engineer-in-charge, With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) and Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides. Partly panelled and partly glazed. (Make for aluminium section: Jindal, Hindalco or its equivalent make), (For Glass Make: Saint Gobain or its equivalent make) |
| 28 | Removing and scraping of old deteriorated plaster of any thickness from wall / R.C.C member including stacking of serviceable material and disposal of unserviceable from site of work with all lead and lift |
| 29 | Providing and laying controlled cement concrete 1:1:2 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in Columns, Pillars posts and struts, upto floor two level. |
| 30 | Providing TMT Bar FE 500D reinforcement for R.C.C. work includingbending, binding and placing in position complete upto floor two level |
| 31 | Providing 20mm thick cement plaster in single coat on single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand) |
| 32 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade area of slab upto 0.50 sqm, etc complete as directed by engineer-incharge |
| 33 | Providing and fixing C.P. brass waste for washbasin or sink. (A)32mmdia. |
| 34 | Providing and fixing washbasin with single hole for pillar tap withC.I. or M.S. brackets painted white including sutting holes andmaking good the same but excluding fittings.(A) Vitreous China:(ii)Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.(Make: Cera, Hindware, Parryware or its Equivalent make) |
| 35 | Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (ii) 20mm dia. (Make: Cera or its Equivalent make) |
| 36 | Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap polished bright. (ii) 20mm dia.(Make: Cera, Hindware, Parryware or its Equivalent make) |
| 37 | Providing and fixing chromium plated brass half turn flush cock of approved quality including fixing in pipe line etc. complete.(i) 20mm dia. (Make: Cera, Hindware, Parryware or its Equivalent make) |
| 38 | Providing and Supplying ISI Mark. G.I.Pipes with Couplings of Medium Duty 20 mm Dia including all taxes, insurance, Transportation, Freight charges, Octroi, Inspection charges, Loading & Unloading, Conveyance to Departmental Stores, Stackingetc. Complete. (IS-1239) |
| 39 | Providing and Supplying ISI Mark. G.I.Pipes with Couplings of Medium Duty 25 mm Dia including all taxes, insurance, Transportation, Freight charges, Octroi, Inspection charges, Loading & Unloading, Conveyance to Departmental Stores, Stackingetc. Complete. (IS-1239) |
| 40 | Providing and Supplying ISI Mark. G.I.Pipes with Couplings of Medium Duty 32 mm Dia including all taxes, insurance, Transportation, Freight charges, Octroi, Inspection charges, Loading & Unloading, & Loweing, Laying & Joining G.I.Pipes with G.I. Specials of required dia giving hydraulic testing and as directed by Engineer-in Charge. Complete Etc. |
| 41 | Providing and Supplying ISI Mark. G.I.Pipes with Couplings of Medium Duty 40 mm Dia including all taxes, insurance, Transportation, Freight charges, Octroi, Inspection charges, Loading & Unloading, & Loweing, Laying & Joining G.I.Pipes with G.I. Specials of required dia giving hydraulic testing and as directed by Engineer-in Charge. Complete Etc. |
| 42 | Providing and Supplying ISI Mark. G.I.Pipes with Couplings of Medium Duty 50 mm Dia including all taxes, insurance, Transportation, Freight charges, Octroi, Inspection charges, Loading & Unloading, & Loweing, Laying & Joining G.I.Pipes with G.I. Specials of required dia giving hydraulic testing and as directed by Engineer-in Charge. Complete Etc. |
| 43 | Providing, laying and jointing in true line and level 110 diametreU.P.V.C (Type B) conforming to IS 13592-1992 with one end plainand other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make fordrainage system pipe line,pipe shall be jointed with each other with rubber lubricant, pipeshall be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm centerto center or shall be concealed in walls as directed includingnecessary fittings such as bends, shoes etc. including testing ofpipes and joints and jointed with adhesive solvent cement includingcost of all materials. |
| 44 | Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the following nominal diameter of self cleansing design with C.I scread down or hinged grating including the cost of cutting and making good the walls. |
| 45 | Dismantling santtary fittings like wash basin . W.C. pan Indian and European type, flushing tank etc. including stacking the materials with all lead and lift |
| 46 | Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers. |
| 47 | Providing and fixing wash down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and coverto be measured and paid for separately)(A) vitreous China Pattern :(i) in white colour (Make: Cera, Hindware, Parryware or its Equivalent make) |
| 48 | Providing and fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild brackets, complete with fittings such as lead valve less syphon, 15mm nom.nal size brass ball valve with polythene float, C.P brass handle unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes in walls and making good the same connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately)(A) Vitreous China (I) In white colour (Make: Cera, Hindware, Parryware or its Equivalent make) |
| 49 | Providing and fixing G.I. inlet connection for flush pipe with W.C. Pan |
| 50 | Providing and fixing plastic seat and cover for wash down water closer with C.P. brass hinges and rubber buffers. (B) Black plastic seal and cover. |
| 51 | Carring out plinth treatment to post construction / existing structure by spraying chemical solution for termite control treatment including labour and material consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-IIConsentration Weight one percent is recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 % concrentration inclusive of one litre chemical emulsion appication at the rate of 5 Litre chemical / Sqm of surface is recommended as per I.S |
| 52 | Providing and Fixing of Roller blind curtains of approved Color and Shade by the Competant Authority at Silvassa Municipal Council. The cost includes all loading, unloading, fixing and all other applicable charges & taxes etc. Complete. |
| 53 | Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(B) Dense or Hard soil |
| 54 | Excavation for foundation for depth from 1.5 m to 3.0m including sorting out and stacking of usefulmaterials and disposing off the excavated stuff upto 50 Meter lead.(B) Dense or Hard soil |
| 55 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading,transporting, unloading to approved municipal dumping ground for lead upto 05 km for all lifts, complete as per directions of Engineer-in-charge. |
| 56 | Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete.(B) 150mm |
| 57 | Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mmthick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm deep for single pipe line. |
| 58 | Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(ii) Inside dimensions 500mm x 700 mm and 450mm deep for pipe line with one or two inlets. |
| 59 | Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brickbats 40 + 50mm size) inside plastering15mm thick with Cement Mortar 1:3 (1-Cement : 3-coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm diameter total weight of cover and frame to benot less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick masonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (1) A type depth 0.90 Metre for 150mm diameter sewer. |
| 60 | Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement:2-coarse sand : 4-graded stone aggregate 20mm nominal size)foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brickbats 40 + 50mm size) inside plastering 15mm thick with CementMortar 1:3 (1-Cement : 3-coarse sand) finished with a floating coat of neat cement and making channels incement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stoneaggregate 20mm nominal size) finished smooth complete including curing and festing (i) Insidesize 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (2) B type depth 1.50 Metre for 150mm diameter sewer. |
| 61 | Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brickbats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix(1-Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover withframe size 560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (3) C type depth 2.25 Metre for 150mm diameter sewer. |
| 62 | Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge. |
| 63 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment) |
| 64 | Supply and Fixing Point wiring for Light / Bell with2-1.5 sq.mm& earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires up to 10 mtrs length ,in below type ofpipe erected with 6A Modular type switch / bell push & accessories and earth continuityof following type, erected on PVC / Metallic/Wooden box, single mounting base framecovered with textured/metallic white front plate modules erected on /in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. with oval conduit /pvc casing capping double lock type erected flushed on wall/Cealing complete. (Cat -III,Havells, Poly cab, RR Cable, Finolex) |
| 65 | Supply and Fixing Point wiring for FAN with 2-1.5 sq.mm& earthwire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV GradeFRLS PVC insulated multistrand copper wires up to 10 mtr length, in below type of pipe erected with 6A Modular type switch and hum free EME four or more step type electronic fan regulator with separately mounted andaccessories with earth continuity of following type erected on PVC / Metallic /wooden box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed.with oval conduit /pvc casing capping double lock type erected flushed on wall/Cealing complete(Cat -III,Havells,Crompton,Polar,Poly cab,RR Cable) |
| 66 | Supply and Fixing Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erectedon/ in wall / ceiling with following type accessories (Cat-III) |
| 67 | Supply and Fixing Point wiring for Individual Plug with& earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires up to 10 mtr length, in below type pipeerected completedwith Modular type switch & 5 pin Plugerected on PVC / Metallic/wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessoriesfor 16 Amp.Plug and 16 Amp. Switch with 2-2.5 Copper wire from MCB DB Board with oval conduit/PVC casing capping double lock type erected flushed on wall/Cealing complete(Cat-III) |
| 68 | Providing and erecting following type of Modular Type Accessories mounted with pvc / metallic/wooden box, single mounting base frame covered with textured / metallic white front plate , modules erectedwith necessary connection. As desired by Engineer In charge Electronic hum Free four or more steps EME Fan regulator(Cat-III) |
| 69 | Providing and erecting following type of Modular Type Accessories mounted with pvc / metallic/wooden box, single mounting base frame covered with textured / metallic white front plate , modules erectedwith necessary connection. As desired by Engineer In charge Blank Plate Single |
| 70 | Providing & Erecting following Shockprooftissino type accessories erected on3 mm thick PC (Polycarbonate) sheet inPVC/ Metal /wooden Box.erected on wall/ ceiling.Bakelite ceiling, rose |
| 71 | Providing & Erecting following Shockprooftissino type accessories erected on3 mm thick PC (Polycarbonate) sheet inPVC/ Metal /woodenBox.erected on wall/ ceiling.Bakelite lamp holder |
| 72 | providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipeto be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size with oval conduit /pvc casing capping double lock type2 wire 2.5 sq.mm (Cat -III,Havells, Poly cab, RR Cable, Finolex) |
| 73 | Supplying & erecting M.S. Box having 16 Gaugepainted with red oxide orHeavy duty PVC box erected flushed on wall or concealed in wall with necessary plastering & finishing as directed of following size.100 mm x 100 mm x 75 mm(d)/ 6 Modular |
| 74 | Supplying & erecting M.S. Box having 16 Gaugepainted with red oxide orHeavy duty PVC box erected flushed on wall or concealed in wall with necessary plastering & finishing as directed of following size.175 mm x 100 mm x 75 mm(d)/ 8 Modular |
| 75 | Supplying & erecting M.S. Box having 16 Gaugepainted with red oxide orHeavy duty PVC box erected flushed on wall or concealed in wall with necessary plastering & finishing as directed of following size.200 mm x 250 mm x 75 mm(d)/ 12 Modular |
| 76 | Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistancewith diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %,CCT4000 K to 6500K, Uniformity ratio >0.7,Luminaire efficacy> 85 lumens/watt ,LED driver efficiency > 85 %CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates)Tube Light- 20 Watt, Surge -2 KV, IP-20, 4 Feet, Cat-III |
| 77 | Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die castpowder coated and high U.V. & corrosion resistancewith diffuserhoused in aluminium casted body with company mark/name 160V to 270V,Power Factor more than 0.95, THD < 15 %,CCT3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED driver efficiency > 85 %( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20(iv) 18 to 20 watts, 8\" x 8\", Surge- 2 KV, cat III (Philips, Cromptons, halonix & Surya) |
| 78 | Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star rated, Ceiling fan with Brush Less Direct Current (BLDC) permanent ferrite magnet Motor, class of insulation: B, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit with earthing provision,copper winding, Power factor not < 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%, compitible with electronic regulator unit for Speed Control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (Max.),suitable for 140 to285 Voltage and rectifier circuit with surge, over current and overload protection , 50 Hz, Single phase AC Supply, earthing etc. Complete as required.[ Make shall be approved by Engineer in Charge] (A) 1200 mm Sweep (48\") CAT.III) Philips,Crompton,Havells,Bajaj |
| 79 | Supplying & erecting XLPE(IS:7098) (I)-88 ISI unarmoured Aluminium cable 1.1 KV.grade to be erected as directed of following size. 3 core 2.5 Sq. mm (Cat-III ,RR Cable ,Poly cab, Finolex, Havells) |
| 80 | Supplying and Erection of 60 watt LED street light fitting with High power white LEDs wattage of 1 watt and above assembled on single MCPCB, efficiency more than 130 Lm/w and corrosion free High pressure die cast aluminium housing with smooth finish poweder coated and heat sink extruded aluminium with diffuser and polycarbonated optics/lenses with company mark/name engraved or embossed 120 to 300, power factor more than 0.95, THD < 10% CCT 5000 k to 5700 k, Uniformity ratio >0.45, Luminaries efficiency >85 Lumens/watt.LED driver efficiency> 85% CREE/OSRAM/PHILIPS lumileds/NICHIA /SEOUL/Bridgelux (U.S.A) Make LED used for luminaire.(Each fitting required LM-79 & LM-80 Certificates)(LED 48 Watt) Cat-III(A) Street Light (IP-65), Surge -4KV |
| 81 | Supply and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections & complete erected in existing 16 G.M.S. housing.(Cat.III)(Havells/C & S/HPL/ABB) |
| 82 | Supply and erecting Miniature circuit breaker single pole 20 Amp. suitable to operate on 240 V A.C. system and having breaking capacity10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark (Cat-III)Havells/C & S/HPL/ABB) |
| 83 | Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I.Pipeshaving Outer pipedia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications.for electrical installation up to 440v in nomial sol Length of 1 mtr back filling compound 1 Nos bag of 15 kg |
| 84 | Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt lowers & square frame. 200mm with 1350RPM Cat.II |
