Tender For Construction Of Opd And Therapy Room Ataiishvaruna Campus,Mysore; 1 Civil Items 2 Earth work in surface excavation by mechanical means for lowering & levelling the ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift up to 1.5m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work 3 Earth work excavation for foundation by mechanical means for all works & depth up to 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution light, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift up to 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In ordinary/soft rock without blasting up to 1.5 m depth 4 Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggregate and fine aggregate derived from natural sources, Ordinary Portland Cement (OPC) @ 75% & GGBS @ 25% proportion, admixtures to accelerate/retard setting of concrete, to improve durability and workability without impairing strength; pumping of concrete to site of laying , curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engineer-in-charge. RMC M10 Grade 5 Providing size stone masonry with hard stone in foundation & plinth with cement mortar 1:6 (1 cement : 6 course sand) 6 Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5m. 7 PCC 1:2:4 for plinth bed: Providing and laying in position cement concrete for all sub structures of building, irrigations works, sub structure works of bridges, Drain works & other parallel works from 0.50 m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and the aggregates as per relevant IS codes machine mixed with super plasticizers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevantIS codes, labour, usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 (M15) using 20 mm nominal size graded crushed coarse aggregates 8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement:6 coarse sand) including cost of all materials, labour, scaffolding and usage of machinery & other incidental charges complete as per the direction of engineer in charge of work 9 Supplying, fitting and placing TMT FE 550/550D steel reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, trying with binding wire/soft annealed steel wire and other ancillary operations complete as per drawing and technical specification. All other type of structures 10 Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggregate and fine aggregate derived from natural sources, Ordinary Portland Cement (OPC) @ 75% & GGBS @ 25% proportion, admixtures to accelerate/retard setting of concrete, to improve durability and workability without impairing strength; pumping of concrete to site of laying , curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engineer-in-charge.RMC M30 Grade 11 Form work/centring :For RCC columns 12 Form work/centring: For Plinth, lintel & roof beams 13 For work/centring: For roof slab 14 Form work/centring: For chajjas 15 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineering-in-charge 16 Providing and fixing M.S grills of required pattern in frames of windows etc, with M.S. flats, square or round bars etc, including priming coat with approved steel primer all complete. Fixed to openings/wooden frames with rawl plugs screws etc 17 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in- charge 18 Providing and fixing of 2 track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum Ti02 (Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets-grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having a overall size of 60mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24mm.Windows shall be provided with 5mm plain float glass, standard hardware & single point locking system with touch lock.Wall thickness of frame & sash shall be of 2-2.5 mm. Maximum possible size – 1819mm (The cost is inclusive of all fixtures and separate charges for minor T&P’s shall not be made) 19 Painting steel work with Deluxe Multi Surface Paint to give an even shade.Two coat applied @ 0.90L/10 m2 over an under coat of primer applied @ 0.80 L/10 m2 of approved brand and manufacture including preparing the surface after thoroughly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineering-in-charge 20 Finishing walls with water proofing cement paint of required shade: New work (Two coats applied @ 4.84 kg/10 m2) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineering-in-charge 21 Providing and fixing 1st quality ceramic/vitrified glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including spacer joint of 3-4mm, pointing in white cement mixed with pigment of matching shade complete 22 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20mm (average) thick base of cement mortar 1:4 (1 cement :4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer- in – Charge 23 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge 24 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded 30mm WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges 25 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) &1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In-Charge 26 Providing and laying pressed clay tiles(as per approved pattern 20mm nominal thickness of approved size)on roofs jointed with cement mortar 1:4 mixed with 2% integral water proofing compound laid over a bed of 20mm thick CM1:4 & finished neat complete 27 Rain water pipe : providing and fixing on wall face100mm dia PVC rain water pipes 28 Electrical Works:Laying of one number of PVC insulatedand PVC sheathed /XLPE Poweredcable of 1.1 KV grade of 16 mm size direct in ground including excavation , sand cushioning, protective covering and refilling the trench etc as required 29 Earthing with GI earthing pipe 4.5 mtr long 40mm/36 dia including accessoriesand providing masonry enclosure withcover plate having locking arrangements and watering pipe etc with charcoal/cake and salt) as required 30 Supply and fixing cable end box(loose wire box) suitable for 10 way double door SPN MCB DB 240 volts on surface /recess complete with testing and commissioning etc as required 31 Supply and making end termination with brass compressiongland and aluminium leg foR 3x16 mm size PVC insulated and PVC sheathed XLPE aluminium cable 1.1 KV grade as required 32 Wiring for circuit/sub main wiring along with the following wiring 2x2.5 sqmm+ 1x2.5 mm with conduit 33 Wiring for circuit/sub main wiring along with the following wiring 2x1.5 sqmm+ 1x1.5 mm with conduit 34 Supply and fixing size/modules GI Box along with module boxand cover plate for 12 modular switches in recess etc as required 35 Supply and fixing 5/6A modular switch /socket on the existing modular plate and switch box including connection but excluding modular plate etc as required 36 Supply and fixing 15/16A modular switch /socket on the existing modular plate and switch box including connection but excluding modular plate etc as required 37 Supply and fixing 3 Pin 5/6A Socket outlet 38 Supply and fixing 6 Pin 15/16A Socket outlet 39 Supply and fixing of GI box of 3 module along with modular box and cover plate for modular in recess etc as required 40 Supply installation testing and commissioning of 1200mm BLDC fan without remote control 41 Supply installation testing and commissioning of 1200mm BLDC fan with remote control 42 Supply and installation of 4 feet LED tube 43 Supply and fixing of 10 A rating single pole MCB 44 Supply and fixing of 10 A rating 2 pole MCB 32 AMPS 45 Supply and fixing of 63A double pole single phase and neutral 240V residual current circuit breaker(RCCB) having a sensitivity current 30MAQ in the existing MCB DB complex with connection testing and commissioning etc as required
